How to set the time and date on the Audizio Turin radio after a power outage?

Question

Accepted Answer

After a power outage, the Audizio Turin radio may not display the time and date correctly. Here’s how to restore the time and date:

Automatic setting via network connection

The Audizio Turin radio uses the NTP (Network Time Protocol) by default to automatically synchronize the time and date as soon as it is connected to an Internet network (WiFi or Ethernet). For this to work:

Make sure the radio is properly connected to your local network.
In the Settings menu, check that the Use Network Time (NTP) option is enabled.
Once the connection is established, the radio should automatically retrieve the correct time and date.

Manual setting of the time and date

If automatic synchronization does not work or if you do not have a network connection, you can manually set the time and date:

Access the Settings menu of the radio.
Select the Date and Time section.
Choose the Set Date and Time option to make a manual adjustment.
Use the remote control to adjust the time and date as needed.

By following these steps, you will be able to easily restore the time and date on your Audizio Turin radio after a power outage.

User manual Audizio Radio : user manuals and guides in PDF

Models Audizio Radio most viewed

Other categories Audizio

Recent questions about Radio Audizio