Q: How to activate multi-point connection on the Soundcore Life Q35?

The Soundcore Life Q35 supports the Multipoint Bluetooth feature that allows you to pair the headset with multiple devices. Here’s how to do it: Step 1: Pairing the first device Make sure the headset is completely turned off Press and hold the power button for 5 seconds until the LED indicator flashes blue The headset enters Bluetooth pairing mode Select "Soundcore Life Q35" from the Bluetooth list on your first device (phone, tablet, computer, etc.) Wait for the LED to show a steady blue light for 2 seconds, indicating that the connection is established Step 2: Pair a second device Once the first device is successfully connected, double-press the power button quickly The headset will enter pairing mode again (flashing blue LED) Select "Soundcore Life Q35" on your second device to pair it Important: Using in Multipoint mode Although multiple devices are paired, the headset can only play music from one device at a time To switch to another device, first pause playback on the currently active device, then start playback on the other device Each time the headset is powered on, it will automatically reconnect to the last device it was connected to , provided that it is within Bluetooth range (15 meters) You can pair as many devices as you want with the headset, but you can only listen to music from one at a time. This feature is ideal for quickly switching from one device to another throughout your day.

Q: How to connect the Soundcore Q20i headphones to the television? The blue LED is blinking continuously.

The blue LED blinking continuously on your Soundcore Q20i indicates that the headphones are in pairing mode - this is normal and expected. Connecting the Q20i to the television If your television has a Bluetooth function: Make sure the LED on your Q20i is blinking blue (pairing mode) Access the Bluetooth settings on your television Search for and select "soundcore Q20i" from the list of available devices The television will automatically connect the headphones According to the manual, here are the specific commands for the Q20i: First use : press and hold the multi-function button for 3 seconds to turn on - the headphones will automatically enter Bluetooth pairing mode Manual pairing : double press the multi-function button after turning on to enter pairing mode Dual connection : the Q20i can be connected to two devices simultaneously If pairing still does not work: Check that Bluetooth is enabled on your television Remove the Q20i from the Bluetooth device list on your television, then try pairing again Perform a reset: press and hold both the Volume button and the multi-function button for 5 seconds until the LED blinks blue twice, then try pairing again

Question 1

How to activate multi-point connection on the Soundcore Life Q35?

Accepted Answer

The Soundcore Life Q35 supports the Multipoint Bluetooth feature that allows you to pair the headset with multiple devices. Here’s how to do it:

Step 1: Pairing the first device

Make sure the headset is completely turned off
Press and hold the power button for 5 seconds until the LED indicator flashes blue
The headset enters Bluetooth pairing mode
Select "Soundcore Life Q35" from the Bluetooth list on your first device (phone, tablet, computer, etc.)
Wait for the LED to show a steady blue light for 2 seconds, indicating that the connection is established

Step 2: Pair a second device

Once the first device is successfully connected, double-press the power button quickly
The headset will enter pairing mode again (flashing blue LED)
Select "Soundcore Life Q35" on your second device to pair it

Important: Using in Multipoint mode

Although multiple devices are paired, the headset can only play music from one device at a time
To switch to another device, first pause playback on the currently active device, then start playback on the other device
Each time the headset is powered on, it will automatically reconnect to the last device it was connected to, provided that it is within Bluetooth range (15 meters)

You can pair as many devices as you want with the headset, but you can only listen to music from one at a time. This feature is ideal for quickly switching from one device to another throughout your day.

Question 2

How to connect the Soundcore Q20i headphones to the television? The blue LED is blinking continuously.

Accepted Answer

The blue LED blinking continuously on your Soundcore Q20i indicates that the headphones are in pairing mode - this is normal and expected.

Connecting the Q20i to the television

If your television has a Bluetooth function:

Make sure the LED on your Q20i is blinking blue (pairing mode)
Access the Bluetooth settings on your television
Search for and select "soundcore Q20i" from the list of available devices
The television will automatically connect the headphones

According to the manual, here are the specific commands for the Q20i:

First use: press and hold the multi-function button for 3 seconds to turn on - the headphones will automatically enter Bluetooth pairing mode
Manual pairing: double press the multi-function button after turning on to enter pairing mode
Dual connection: the Q20i can be connected to two devices simultaneously

If pairing still does not work:

Check that Bluetooth is enabled on your television
Remove the Q20i from the Bluetooth device list on your television, then try pairing again
Perform a reset: press and hold both the Volume button and the multi-function button for 5 seconds until the LED blinks blue twice, then try pairing again

User manual soundcore Earphones : user manuals and guides in PDF

Models soundcore Earphones most viewed

Other categories soundcore

Recent questions about Earphones soundcore