How to use the PHILIPS AC2887 air purifier?

Question

Accepted Answer

The PHILIPS AC2887 air purifier is an advanced purification device equipped with AeraSense technology and the NanoProtect series 3 filter. Here’s how to use it effectively.

Installation and startup: Before first use, unplug the device, pull the back cover to detach it, remove the filter from its packaging, and place it in the device. Replace the cover and plug the purifier into a power outlet. Press the power button to turn it on. The device emits a sound signal and the display shows “Initialization” for about 30 seconds. Once the air quality is measured, the purifier automatically displays the detected levels.

Wi-Fi connection and app: Download the “Air Matters” app from the App Store or Google Play. Ensure that your smartphone is connected to your Wi-Fi network (2.4 GHz only). The Wi-Fi indicator will blink orange during the first connection. Follow the on-screen instructions to connect the device. After connection, the indicator turns stable white. The distance between your device and the purifier should be less than 10 m.

Selecting operating modes: Press the mode selector to switch between three modes. The Automatic mode allows the purifier to automatically adjust the fan speed based on the real-time detected air quality. The Turbo mode operates at maximum speed for rapid purification. The Sleep mode operates quietly at reduced speed, with the display dimming after 3 seconds.

Understanding the air quality indicator: The air quality indicator changes color according to the levels of particles (PM2.5), indoor allergens (IAI), and gases detected. Blue indicates good quality, blue-purple indicates acceptable quality, purple-red indicates poor quality, and red indicates very poor quality. You can toggle the display between PM2.5, gases, and IAI by pressing the selection button. The display defaults to the IAI level (allergen index from 1 to 12, where 1 is optimal).

Monitoring and maintaining the filter: Press the reset/check filter status button to view the remaining lifespan (displayed as a percentage). A blue display indicates optimal lifespan (16-100%), blue-purple indicates acceptable lifespan (9-15%), purple-red indicates nearing end of life (4-8%), and red indicates imminent end of life (0-3%). Clean the surface of the filter every two months with a vacuum cleaner. Clean the particle sensor with a dry cotton swab and replace the NanoProtect filter (FY3430/30) as recommended (generally every 12 months).

Usage tips: For optimal performance, close doors and windows and keep curtains away from air inlets/outlets. The device operates quietly at 32 dB in night mode and can effectively purify rooms up to 79 m². The device has an energy-saving feature that automatically turns off the display when it is dark. Press any button to reactivate the indicators. To completely turn off the device, press and hold the power button for 3 seconds.

User manual PHILIPS Air purifier : user manuals and guides in PDF

Models PHILIPS Air purifier most viewed

Other categories PHILIPS

Recent questions about Air purifier PHILIPS