The CD player does not show the playback status and displays error No CD - what should I do?

Question

Accepted Answer

This behavior generally indicates that the system is unable to read the disc, even if it is inserted. Here are the solutions to try:

Basic Checks

Clean the CD - Use a soft, dry cloth to clean the surface of the disc from the center to the edges. Dust or scratches can prevent playback.
Check the orientation of the CD - The printed side of the disc should be facing up. Reinsert it completely until you hear a click.
Try another CD - Test with a different audio CD that is known to work, to check if the problem lies with the player or the disc.
Restart the system - Turn off the PHILIPS FWM139 completely for 30 seconds, then turn it back on.

If the problem persists

The laser sensor inside the player may be dirty. This type of problem often occurs after prolonged use. In this case, the CD player will need to be cleaned or repaired by a technician.

User manual PHILIPS Hi-Fi System : user manuals and guides in PDF

Models PHILIPS Hi-Fi System most viewed

Other categories PHILIPS

Recent questions about Hi-Fi System PHILIPS