FWM462 - Hi-Fi System PHILIPS - Free user manual and instructions

Product Type	Hi-Fi System
Brand	Philips
Model	FWM462
Dimensions (W x H x D)	Approx. 250 x 300 x 350 mm
Weight	Approx. 5.0 kg
Power Supply	AC 230 V, 50 Hz
Power Consumption	40 W
Output Power (RMS)	2 x 20 W
Supported Disc Types	CD, CD-R, CD-RW
Radio Bands	FM, AM (MW)
Preset Stations	40 (FM/AM)
Cassette Deck	Yes (Stereo)
Audio Input	3.5 mm auxiliary
Headphone Jack	Yes (3.5 mm)
USB Port	Yes (for MP3 playback)
Remote Control Included	Yes
Clock/Timer	Yes (with sleep timer)
Display Type	LCD
Cleaning	Use a soft dry cloth; avoid liquids
Safety	Do not expose to water or high humidity
Spare Parts	Contact Philips support for genuine parts
Repairability Index	6 out of 10

Frequently Asked Questions - FWM462 PHILIPS

How do I connect external devices to the Philips FWM462?

Use the auxiliary input (3.5 mm jack) on the front or rear panel. Connect your device with a standard audio cable.

Can I play MP3 files from a USB drive?

Yes, the USB port supports MP3 playback. Insert a USB drive containing MP3 files; the system will automatically detect them.

How do I set the clock?

Press and hold the CLOCK button on the remote or front panel. Use the TUNING +/- buttons to adjust hours/minutes. Press CLOCK again to confirm.

What should I do if the remote control stops working?

Check the batteries and replace if needed. Ensure there are no obstacles between the remote and the system. If the problem persists, reset the remote by removing batteries and pressing any button for 5 seconds.

How do I record from radio to cassette?

Load a blank cassette into Deck B. Tune to the desired radio station. Press RECORD on the cassette deck; it will start recording from the radio.

The CD skips during playback. What can I do?

Clean the disc with a soft lint-free cloth from the center outward. Check for scratches. If skipping persists, the laser lens may need cleaning; use a CD lens cleaner.

How do I improve radio reception?

Fully extend the FM antenna and move it to different positions. For AM, rotate the built-in ferrite antenna for best reception.

What is the sleep timer and how to set it?

The sleep timer turns off the system after a set time. Press SLEEP repeatedly to choose from 15, 30, 45, 60, 90, or 120 minutes.

Can I connect the system to a TV?

Yes, if your TV has a headphone or audio output, connect it to the auxiliary input of the FWM462 using a 3.5 mm to 3.5 mm cable.

How do I clean the unit?

Unplug the system. Use a soft, dry cloth to wipe the exterior. Do not use any solvents or liquids. For the cassette heads, use a head cleaning cassette.

USER MANUAL FWM462 PHILIPS

Register your product and get support at

www.philips.com/welcome

FWM462

EN User manual

Contents

1 Important 3

Safety 3

Notice 4

2 Your Mini Hi-Fi System 5

Introduction 5

What's in the box 5

Overview of the main unit 6

Overview of the remote control 8

3 Get started 9

Connect FM antenna 9

Connect AM antenna 10

Connect speakers 10

Connect power 10

Prepare the remote control 11

Auto install radio stations 11

Set clock 11

Turn on 11

4 Play 12

Play disc 12

Play from USB 12

5 Play options 13

Repeat and random play 13

Program tracks 13

Display play information 13

6 Adjust volume level and sound

effect 14

Adjust volume level 14

Mute sound 14

Boost sound power 14

Select a preset sound effect 14

Enhance bass 14

Incredible surround 14

Customize sound for room acoustics 14

7 Listen to radio 15

Tune to a radio station 15

Program radio stations automatically 15

Program radio stations manually 15

Select a preset radio station 15

Change AM tuning grid 15

8 USB record 16

Record to USB 16

Schedule radio-to-USB record 16

9 Other features 17

Set the alarm timer 17

Set the sleep timer 17

Listen to an external device 17

Delete from USB device 18

Karaoke 18

Adjust display brightness 18

10 Product information 18

Specifications 18

USB playability information 19

Supported MP3 disc formats 20

Maintenance 20

11 Troubleshooting 20

1 Important

Safety

①Read these instructions.
②Keep these instructions.
③Heed all warnings.
④Follow all instructions.
⑤Do not use this apparatus near water.
⑥Clean only with dry cloth.
⑦Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
⑧Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
⑨Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
⑩ Only use attachments/accessories specified by the manufacturer.
⑪ Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

⑫Unplug this apparatus during lightning storms or when unused for long periods of time.
⑬ Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
⑭Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:

Install all batteries correctly, + and - • as marked on the unit.

Do not mix batteries (old and new • or carbon and alkaline, etc.).

Remove batteries when the unit is • not used for a long time.

⑮Apparatus shall not be exposed to dripping or splashing.
⑯Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
⑰This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.
⑱Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never place this apparatus on other electrical equipment.

• Keep this apparatus away from direct sunlight, naked flames or heat.
• Never look into the laser beam inside this apparatus.
• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.

Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Notice

Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user's authority to operate the equipment.

Be responsible Respect copyrights

The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of

packaging materials, exhausted batteries and old equipment.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

This apparatus includes this label:

2 Your Mini Hi-Fi System

Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome.

Introduction

With this unit, you can enjoy audio from discs, USB devices, external devices, or radio stations. For your convenience, you can load up to 3 discs at once.

To enrich sound, this unit offers you these sound effects:

• MAX sound for instant power boost
• Digital Sound Control (DSC)
• Dynamic Bass Boost (DBB)
- Incredible surround (IS) - Virtual Ambience-based Control (VAC)

The unit supports the following media formats:

What's in the box

Check and identify the contents of your package:

Main unit × 1 •

AC power cable × 1•

Power plug adaptor x 1•

Loudspeaker box x 2•

Remote control with 2 AAA batteries•

FM wire antenna x 1•

AM loop antenna x 1•

MP3 link cable × 1•

Quick start guide•

User manual•

Overview of the main unit

①DISC 1/2/3

Select a disc.

②DISC CHANGE

Change a disc.

③Display panel

Show current status.

④

Turn on the unit or switch to • standby mode.

⑤Source selection keys

Select a source.

⑥CLOCK

Set the clock.

⑦SLEEP/TIMER

Set the sleep timer.

Set the alarm timer.

Turn on or off sleep/alarm timer.

⑧VOLUME

Adjust volume.

⑨ |◀◀/▶▶|

Skip to the previous/next track. Search within a track/ disc/USB. Tune to a radio station. Adjust time.

⑩ ■

Stop play or erase a program.

⑪ALBUM/PRESET+/-

Skip to the previous/next album. Select a preset radio station. Adjust time.

• Select 12 hour or 24 hour format.

⑫USB DELETE

- Delete audio files stored on a USB device.

⑬USB RECORD

• Record to a USB device.

⑭

• Jack for a USB mass storage device.

⑮DSC

- Select a preset sound equalizer setting.

⑯MP3 LINK

• Audio input jack (3.5mm) for an external audio device.

⑰DBB

Turn on or off dynamic bass • enhancement.

⑱MIC VOL

- Adjust microphone volume.

⑲MAX SOUND

• Turn on or off instant power boost for sound.

⑳Microphone port

• Jack for a microphone.

21

• Start or pause play.

⑳PROG

• Program tracks. Program radio stations.

②3MODE

Select repeat play or random play.

⑳DISPLAY

Select display information.

⑲Disc compartment door

②6OPEN/CLOSE

Open or close the disc • compartment.

Overview of the remote control

①

• Turn on the unit, or switch to standby mode.

②Source selection keys

- Select a source.

③CLOCK

- Set the clock.

④MODE

Select repeat play or random play.

⑤USB DELETE

Delete audio files stored on a USB • device.

⑥TITLE+/-

Skip to the previous/next track. Select a preset radio station. Adjust time.

ALBUM +/-

Skip to the previous/next album. Search within a track/ disc/USB. Tune to a radio station. Adjust time. Select 12 hour or 24 hour format.

⑦DSC

Select a preset sound equalizer • setting.

⑧MAX

Turn on or off instant power boost • for sound.

⑨VOL +/-

- Adjust volume.

⑩DBB/IS

Turn on or off dynamic bass • enhancement. Turn on or off incredible surround.

⑪Numeric keypad

• Select a track from a disc directly.

⑫PROGRAM

• Program tracks. Program radio stations.

⑬DISPLAY

• Select display information.

14

- Stop play or erase a program.

15

• Start or pause play.

⑯VAC

Select an ambience-based equaliser • setting.

⑰USB RECORD

Record to a USB device.

⑱MUTE

Mute volume.

⑲DIM

Select different levels of display • brightness.

⑳SLEEP/TIMER

Set the sleep timer.

Set the alarm timer.

Turn on or off sleep/alarm timer.

3 Get started

Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here:

Model No. ____

Serial No.

Connect FM antenna

1 Connect the supplied FM antenna to the FM jack on the back of the main unit.

Connect AM antenna

1 Assemble the AM loop antenna.

2 Connect the AM loop antenna to the AM jack on the back of the main unit.

Connect speakers

Note

For optimal sound, use the supplied speakers • only.

- Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual.

1 Insert the wire completely.

- Insert the right speaker wire to "R", and left speaker wire to "L".

Connect power

Caution

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage set on the voltage selector on the back of the unit.

- Before connecting the AC power cord, ensure you have completed all other connections.

Note

The type plate is located on the back of the main unit.

1 If your power supply voltage is 110V-127V, adjust the voltage selector to 110V-127V.

2 Connect the AC power cable to: the main unit. the wall socket.

Prepare the remote control

Note

- Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

To replace the remote control battery:

1 Open the battery compartment.
2 Insert two AAA batteries with correct polarity (+/-) as indicated.
3 Close the battery compartment.

Note

• If you are not going to use the remote control for a long time, remove the batteries.
• Do not use old and new or different types of batteries in combination.
• Batteries contain chemical substances, so they should be disposed of properly.

Auto install radio stations

When you connect power and no radio stations are stored, the unit automatically begins to store radio stations.

1 Connect the unit to the power supply.
→ [AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed.
2 Press ▶II on the main unit to start installation.

[AUTO] (auto) is displayed.

The unit automatically stores radio → stations with sufficient signal strength.

When all the available radio stations → are stored, the first preset radio station is broadcast automatically.

Set clock

1 In the standby mode, press CLOCK to activate the clock setting mode. The 12 hour or 24 hour format is ↩ displayed.
2 Press ALBUM +/- / repeatedly to select 12 hour or 24 hour format.
3 Press CLOCK to confirm. The clock digits are displayed and → begin to blink.
4 Press ALBUM +/- / to set the hour.
5 Press TITLE+/-/▶to set the minute.
6 Press CLOCK to confirm.

Tip

• To view the clock during play, press CLOCK.

Turn on

1 Press ⏻

→ The unit switches to the last selected source.

Switch to standby

1 Press to switch the unit to standby mode.
The backlight on the display panel is ↩ dimmed.
→ The clock (if set) appears on the display panel.

4 Play

Play disc

1 Press CD 1/2/3 to select the disc source.
2 Press OPEN/CLOSE on the main unit to open the disc compartment.
3 Load up to two discs on the disc trays, with the printed side facing up. To load the third disc, press • CHANGE on the main unit to rotate to the disc tray.

4 Press OPEN/CLOSE on the main unit to close the disc compartment.

→ Play starts automatically.

• To select a disc, press DISC 1/2/3. To pause/resume play, press▶II.
• To stop play, press ■.

• To select another track, press or press a numeric button.

• To select an album, press ALB/PRESET+/-.

• To search within a track, press and hold ◀◀/▶, then release to resume normal play.

Play from USB

Note

- Ensure that the USB device contains playable audio contents for supported formats. (see 'USB playability information' on page 21)

1 Plug the USB device into the socket of this unit.
2 Press USB to select the USB source.
3 Press ALBUM +/-◀◀/▶▶ to select a folder.
4 Press TITLE+/-◄/►to select an audio file.
5 If the USB device doesn't play, press. ▶II
To pause/resume play, press▶II. To stop play, press■.
To search within an audio file, press • and hold ALBUM +/-◄◄◄►, then release to resume normal play.

5 Play options

Repeat and random play

1 Press MODE repeatedly to select:

• 📞: the current track is played repeatedly.
• ALL: all tracks are played repeatedly.
• ALL: all tracks are played randomly and repeatedly.
• ✗: all tracks are played randomly.

2 To return to normal play, press MODE repeatedly until play mode is no longer displayed.

Tip

Shuffle play cannot be selected when you play • programmed tracks.

Program tracks

You can program a maximum of 40 tracks.

1 At CD/USB mode, in the stop position, press PROGRAM to activate the program mode.
[PROG] (program) is displayed.

2 For MP3/WMA tracks, press ALBUM +/-◀◀/▶ to select an album.

3 Press TITLE+/-|◄/►| to select a track number, then press PROGRAM to confirm.

4 Repeat steps 2 to 3 to select and store all tracks to program.

5 Press to play the programmed tracks. During play, [PROG] (program) is displayed.

To erase the program, in the stop • position, press ■.

Display play information

1 During play, press DISPLAY repeatedly to select different play information.

6 Adjust volume level and sound effect

Note

MAX sound and DSC (Digital Sound Control) cannot be activated at the same time.

Adjust volume level

1 During play, press VOL +/- to increase/decrease the volume level.

Mute sound

1 During play, press MUTE to mute/unmute sound.

Boost sound power

MAX gives an instant boost to the sound power.

1 Press MAX to turn on or off the instant power boost.

Select a preset sound effect

The DSC (Digital Sound Control) enables you to enjoy special sound effects.

1 During play, press DSC repeatedly to select:

• [JAZZ] (jazz)
• [ROCK] (rock)
• [TECHNO] (techno)
• [OPTIMAL] (optimal)

Enhance bass

The best DBB (Dynamic Bass Enhancement) setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment.

1 During play, press DBB/IS repeatedly to select:

DBB 1•

DBB 2•

DBB 3•

DBB off •

If DBB is activated, → DBB is displayed.

Incredible surround

You can enhance audio with a virtual surround sound effect.

1 Press and hold DBB/IS to turn on or off the incredible surround. If the incredible surround is activated, → [INC SURR] (incredible surround) is displayed.

Customize sound for room acoustics

1 During play, press VAC repeatedly to select a type of listening environment:

[HALL] (hall) •

[CONCERT] (concert)•

[CINEMA] (cinema)•

7 Listen to radio

Tune to a radio station

1 Press TUNER repeatedly to select FM or AM.
2 Press and hold ALBUM +/-◀◀/▶▶ for more than 2 seconds.

→ [SEARCH] (search) is displayed.

→ The radio tunes to a station with strong reception automatically.

3 Repeat step 2 to tune to more stations.

• To tune to a weak station, press ALBUM +/-◀◀/▶ repeatedly until you find optimal reception.

Program radio stations automatically

You can program a maximum of 40 (FM + AM) preset radio stations.

1 In the tuner mode, press and hold PROGRAM more than 2 seconds to activate automatic program mode.
→ [AUTO] (auto) is displayed.
All available stations are programmed in the order of waveband reception strength.
The first programmed radio station is ↩ broadcast automatically.

Program radio stations manually

You can program a maximum of 40 (FM + AM) preset radio stations.

1 Tune to a radio station.
2 Press PROGRAM to activate program mode.

→ [PROG] (program) is displayed.

3 Press TITLE+/-I◄/►to allocate a number to this radio station, then press PROGRAM to confirm.
4 Repeat the above steps to program other stations.

Tip

To overwrite a programmed station, store • another station in its place.

Select a preset radio station

1 In tuner mode, press TITLE+/-/▶ select a preset number.

Tip

Position the antenna as far as possible from • TV, VCR or other radiation source.

- For optimal reception, fully extend and adjust the position of the antenna.

Change AM tuning grid

In some countries, the AM radio frequency step between adjacent channels is 10 kHz (9 kHz in some areas).

1 Select the tuner source.
2 Press and hold on the main unit for more than 5 seconds.

The frequency step is changed to 9 → kHz or 10 kHz.

All preset stations are erased and need ↩ to be re-programmed.

8 USB record

Audio CD tracks, MP3 files, radio and audio from external devices are recorded in .mp3 format, and WMA files are recorded in .wma format.

The first time you record to USB, a folder called 'PHILIPS' is automatically created in the USB device. Each time you record to USB, the recorded files are stored in a sub-folder in the 'PHILIPS' folder. Files and sub-folders are named numerically in the order in which they are created.

Record to USB

1 Plug the USB device into the socket of this unit.
2 Prepare the source to record from.

• Disc - Select the disc source and load a disc. You can select a track from which a recording starts.
  • Radio - Tune to a radio station.
  • MP3 LINK/AUX - Select the MP3 link/AUX source, then connect and start to play an external device.

3 Press USB RECORD to start recording.

• For discs, press USB RECORD repeatedly to select:

Ⓐ [REC ONE] (record one): the first/ current track is recorded.
B [REC ALL] (record all): all tracks/the remaining tracks are recorded.
→ Disc play starts automatically from the beginning of the disc/the selected track, and the recording starts.
→ To stop recording, press ■.

Note

- If the USB device does not have enough memory to store the audio files, a message about a full memory is displayed.

Schedule radio-to-USB record

Schedule radio recordings in advance and you can listen to your favorite programs at your convenience.

Note

A recording is activated only in the standby mode. The maximum length of a recording is 12 hours.

1 Ensure that you set the clock correctly.
2 Plug the USB device into the socket of this unit.
3 Tune to a radio station.
4 Press to switch to standby mode.
5 Press and hold SLEEP/TIMER for more than 2 seconds. A prompt to select the source is displayed

6 Press TUNER repeatedly to select FM or AM.

7 Press USB RECORD. The start timer digits are displayed and → begin to blink.

8 Press ALBUM +/- / to set the hour.

9 Press TITLE+/-◄/► to set the minute.

10 Press SLEEP/TIMER to confirm. The end timer digits are displayed and → begin to blink.

11 Press ALBUM +/-◀◀/▶▶ to set the hour.

12 Press TITLE+/-◄/►to set the minute.

13 Press SLEEP/TIMER to confirm.

→ 🔒 is displayed.
→ At the scheduled times, the recording begins and ends automatically.
When the recording ends, the unit switches to standby mode.

To deactivate or re-activate a record timer

1 In the standby mode, press SLEEP/TIMER repeatedly.

→ If the timer is activated, 🔒 is displayed.
→ If the timer is deactivated, disappears.

9 Other features

Set the alarm timer

This unit can be used as an alarm clock. The disc, radio or USB is activated to play at a preset time.

Note

- If you have set a record timer and an alarm timer, only the latest timer is activated.

1 Ensure that you have set the clock correctly.
2 Press ⏻ to switch to standby mode.
3 Press and hold SLEEP/TIMER for more than 2 seconds.

A prompt to select the source is ↩ displayed.

4 Press CD 1/2/3, or TUNER or USB to select a source.
5 Press SLEEP/TIMER to confirm.

→ The clock digits are displayed and begin to blink.

6 Press ALBUM +/-◀◀/▶▶ to set the hour.
7 Press TITLE+/-|◀/▶| to set the minute.
8 Press SLEEP/TIMER to confirm.

→ The timer is set and activated.

To deactivate or re-activate an alarm timer

1 In the standby mode, press SLEEP/TIMER repeatedly.

→ If the timer is activated, 🔒 is displayed.
→ If the timer is deactivated, disappears.

Tip

• In MP3 link or AUX mode, the alarm timer cannot be set.
• If disc or USB source is selected but no audio file can be played, radio is activated automatically.

Set the sleep timer

This unit can switch to standby automatically after a set period of time.

1 When the unit is turned on, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). When sleep timer is activated, → is displayed.

To deactivate sleep timer

1 Press SLEEP/TIMER repeatedly until [OFF] (off) is displayed. When sleep timer is deactivated, → disappears on the display.

Listen to an external device

You can listen to an external audio device through this unit.

For audio players with headphone sockets

1 Press MP3 LINK/AUX repeatedly to select the MP3 link source.
2 Connect the supplied MP3 link cable to:

- the MP3 LINK jack (3.5mm) on the unit. the headphone jack on an external device.

3 Start to play the device (refer to the device's user manual).

For audio players with red/white audio output sockets

1 Press MP3 LINK/AUX repeatedly to select the AUX source.
2 Connect the audio cables (white/red jacks, not supplied) to:

- the AUX IN jacks on the back of the unit. the AUDIO OUT• jacks on an external device.

3 Start to play the device (refer to the device's user manual).

Delete from USB device

1 During USB play, press TITLE+/-I◄/►to select an audio file.

• To delete an audio folder, in the stop position, press ALBUM +/-◀◀/▶▶ to select an audio folder.

2 Press USB DELETE.

A confirmation message is displayed.

3 While the message is displayed, press USB DELETE again to confirm.

• To cancel, press■.

Karaoke

You can connect a microphone and sing along with a music source.

1 Turn MIC VOL to the minimum level.
2 Connect a microphone to the microphone port on the unit.
3 Press CD 1/2/3, or TUNER, or USB, or MP3 LINK/AUX to select the source, and start play.
4 Sing through the microphone.

• To adjust the volume of the source, press VOL +/-

• To adjust the volume of the microphone, turn MIC VOL.

Adjust display brightness

1 Press DIM repeatedly to select different levels of display brightness.

10 Product information

Note

Product information is subject to change • without prior notice.

Specifications

Amplifier

Total output power 280W RMS

Frequency response 60 - 16kHz

Signal-to-noiseratio

>67dB A (IEC)

Aux input 1500mV/2000mV

Disc

Laser type Semiconductor

Disc diameter 12cm/8cm

Support disc CD-DA, CD-R, CD-RW, MP3-CD,WMA-CD

Audio DAC 24Bits / 44.1kHz

Total harmonic distortion

<1%

Frequency response

60Hz -16kHz (44.1kHz)

S/N ratio >75dBA

Tuner

Tuning range	FM: 87.5 - 108MHz;AM: 531 - 1602kHz(9KHz); 530 - 1700KHz(10KHz)
Tuning grid	100KHz (FM);9KHz/10KHz (AM)
Number of presets	40 (FM + AM)
FM	75ohm wire
AM	loop antenna

Speakers

Speaker Impedance	6ohm
Woofer	2 × 5.25”
Tweeter	2 × 1.75”
Dimensions(W × H × D)	249 × 344 × 250mm
Weight	3.58kg each

General information-Spec

AC power	110 - 127/220 - 240V,50/60Hz
Operation power consumption	130W
Standby power consumption	<15W
USB direct	Version 2.0/1.1
Dimensions Main Unit (W × H × D)	265 × 310 × 403mm
Weight (without speakers)	6.09kg

USB playability information

Compatible USB devices:

USB flash memory (USB 2.0 or USB 1.1)• USB flash players (USB 2.0 or USB 1.1)• memory cards (requires an additional • card reader to work with this unit)

Supported formats:

USB or memory file format FAT12, • FAT16, FAT32 (sector size: 512 bytes) MP3 bit rate (data rate): 32-320 Kbps and • variable bit rate WMA v9 or earlier• Directory nesting up to a maximum of 8 • levels Number of albums/ folders: maximum 99• Number of tracks/titles: maximum 999• ID3 tag v2.0 or later• File name in Unicode UTF8 (maximum • length: 128 bytes)

Unsupported formats:

Empty albums: an empty album is an • album that does not contain MP3/WMA files, and is not be shown in the display.

• Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played.
  • AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .aac)
  • WMA files in Lossless format

Supported MP3 disc formats

• ISO9660, Joliet
• Maximum title number: 999 (depending on file name length)
• Maximum album number: 99
• Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz
• Supported Bit-rates: 32-320 (kbps), variable bit rates
• ID3 tag v2.0 or later
• Directory nesting up to a maximum of 8 levels

Maintenance

Clean the cabinet

• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Clean discs

- When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.

- Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records.

Clean the disc lens

• After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

11 Troubleshooting

Warning

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.

No power

Ensure that the AC power plug of the • unit is connected properly.

Ensure that there is power at the AC • outlet.

To save power, the unit switches to • standby automatically 15 minutes after a play reaches the end and no control is operated.

No sound or poor sound

Adjust the volume.

Check that the speakers are connected • correctly.

Check if the stripped speaker wires are • clamped.

Left and right sound outputs reversed

Check the speaker connections and • location.

No response from the unit

Disconnect and reconnect the AC power • plug, then turn on the unit again.

Remote control does not work

Before you press any function button, • first select the correct source with the remote control instead of the main unit.

- Reduce the distance between the remote control and the unit.

- Insert the batteries with their polarities (+/− signs) aligned as indicated.

Replace the batteries.

Aim the remote control directly at the •

sensor on the front of the main unit.

No disc detected

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at •

the lens has cleared.

Replace or clean the disc.

Use a finalized CD or correct format disc.

Cannot display some files in USB device

The number of folders or files in the USB •

device has exceeded a certain limit. This

phenomenon is not a malfunction.

The formats of these files are not •

supported.

USB device not supported

The USB device is incompatible with the •

unit. Try another one.

Poor radio reception

Increase the distance between the unit •

and your TV or VCR.

• If the signal is too weak, adjust the
antenna or connect an external antenna
for better reception.

Clock/timer setting erased

• Power has been interrupted or the power

cord has been disconnected.

Reset the clock/timer.

Timer does not work

• Set the clock correctly.

- Switch on the timer.