ZV 1255 - Styler ECG - Free user manual and instructions

Product Type	Hair Styler / Hair Straightener
Brand	ECG
Model	ZV 1255
Plate Material	Floating ceramic plates
Temperature Range	120°C - 210°C, adjustable in 30°C steps
Default Temperature	180°C
Heating Time	Approx. 30 seconds
Display	LED temperature indication
Auto Shut-Off	After 30 minutes
Voltage	100-240 V~, 50/60 Hz
Power Rating	60-75 W
Swivel Cord	Yes
Power Switch	ON/OFF slide switch
Cord Length	Not specified, typical 2-3 m
Weight	Not specified, typical 400 g
Dimensions (L x W x H)	Not specified, typical 28 x 3 x 4 cm
Safety Features	Auto shut-off, floating plates, overheat protection, RCD recommended for bathroom use
Usage	Dry hair only; not for use with styling products; can create straight, curls, outward/inward curls
Cleaning	Wipe plates with damp cloth when cool; do not immerse in water
Warranty	Refer to manual for details

Frequently Asked Questions - ZV 1255 ECG

What is the temperature range of the ECG ZV 1255 hair straightener?

The temperature range is 120°C to 210°C, adjustable in 30°C steps. The default setting is 180°C.

How long does it take to heat up?

It heats up in approximately 30 seconds. The LED indicator flashes until the set temperature is reached.

Does it have an automatic shut-off feature?

Yes, the straightener automatically shuts off after 30 minutes of inactivity for safety. Press the ON/OFF button to restart.

Can I use the straightener on wet or damp hair?

No, the straightener should only be used on completely dry hair. Using on wet hair can damage the device or cause injury.

What type of plates does the ZV 1255 have?

It features floating ceramic plates which glide smoothly through hair and reduce snagging.

How do I clean the straightener?

Clean the plates with a damp cloth (not wet) when the device is cool and unplugged. Never immerse in water or use abrasive cleaners.

Can I create curls with this straightener?

Yes, you can create fine curls, outward curls, and inward curls by wrapping hair around the plates while gliding.

What voltage does it support?

It supports 100-240 V~, 50/60 Hz, making it suitable for use worldwide with the appropriate plug adapter.

Is it safe to use near water?

No, do not use near bathtubs, showers, or washbasins. It is recommended to install a residual current device (RCD) with a tripping current not exceeding 30 mA.

What should I do if the power cord is damaged?

Do not use the straightener. Contact a professional service centre for cord replacement. Do not attempt to repair it yourself.

USER MANUAL ZV 1255 ECG

Pink and white hair styling iron with a flat blade, no visible text or symbols on the device itself.

ZV 1255 Ceramic Wide

HAIR STRAIGHTENER

INSTRUCTION MANUAL

HAAR-GLÄTTEISEN

BEDIENUNGSANLEITUNG

ŽEHLIČKA NA VLASY

NÁVOD K OBSLUZE

JUUKSESIRGENDAJA

KASUTUSJUHEND

GLAČALO ZA KOSU

UPUTE ZA UPORABU

MATU TAISNOTĀJS

ROKASGRÂMATA

PLAUKU TIESINIMO PRIETAISAS

INSTRUKCIJU VADOVAS

HAJVASALÓ

HASZNÁLATI ÚTMUTATÓ

PROSTOWNICA DO WŁOSÓW

INSTRUKCJA OBSŁUGI

APARAT DE ÍNDREPTARE A PĂRULUI

INSTRUCTIUNI DE UTILIZARE

ŽEHLIČKA NA VLASY

NÁVOD NA OBSLUHU

LIKALNIK ZA RAVNANJE LAS

NAVODILA

PEGLA ZA KOSU

UPUTSTVO ZA UPOTREBU

ΙΣΙΩΤΙΚΟ ΜΑΛΛΙΩΝ

ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ

ВИПРЯМЛЯЧ ВОЛОССЯ

1. LED with temperature indication
2. Temperature setting button (+)
3. Temperature setting button (-)
4. ON/OFF switch
5. Floating ceramic plates
6. Swivelling cord terminal

Deutsch

Read carefully and save for future use!

Warning: The safety measures and instructions, contained in this manual, do not include all conditions and situations possible. The user must understand that common sense, caution and care are factors that cannot be integrated into any product. These factors must therefore be ensured by the user /users using and operating this appliance. We are not liable for damages caused during shipping, by incorrect use, voltage fluctuation or the modification or adjustment of any part of the appliance.

To protect against a risk of fire or electric shock, basic precautions shall be taken while using electrical appliances, including the following:

1. Make sure the voltage in your outlet corresponds to the voltage provided on the appliance label and that the socket is properly grounded. The outlet must be installed in accordance with applicable electrical codes according to EN.
2. It is recommended that to install residual current protection (RCD) for better protection with nominal tripping current not exceeding 30 mA in the bathroom electrical circuit. Ask your electrician for advice.
3. Never use the hair straightener if the power cord is damaged. All repairs, including cord replacements, must be carried out at a professional service centre! Do not remove the protective covers from the appliance; there is a risk of electric shock!
4. Protect the appliance from direct contact with water or other liquids to prevent possible electric shock. If the straightener falls into water, unplug the cord from the outlet immediately.
5. Do not use the hair straightener outside or in a damp environment and do not touch the power cord or the appliance with wet hands. Risk of electric shock. Do not leave the straightener exposed to direct sunlight or other sources of heat; the straightener can become damaged.

6. Close supervision is necessary for operating the straightener near children!

7. The hair straightener should not be left running unattended. For safety reasons, switch off the straightener each time you lay it down.

8. Do not switch the appliance on or off by plugging in or pulling out the power supply plug. Always switch off the hair straightener using its main switch and then unplug it from the electrical outlet!
9. Leaving the straightener cord connected to outlet unattended is not recommended. Disconnect the cord from the electrical outlet prior to any maintenance. Do not remove the power cord from the outlet by yanking the cord. Unplug the power cord from the outlet by grasping the plug.
10. Do not allow the power cord to touch hot surfaces or run the cord over sharp edges. Do not wind the power cord around the hair straightener.
11. Do not touch the ceramic plates, they may be hot. The straightener may only be used on dry hair!
12. Unplug the appliance immediately after you are done using it and let the straightener cool completely before putting away.
13. Do not use accessories, which were not recommended by the manufacturer.
14. Use the hair straightener only in accordance with the instructions in this manual. This hair straightener is intended for domestic use only. The manufacturer is not liable for damages caused by the improper use of this appliance.
15. This appliance can be used by children aged 8 years and older and people with lower physical or mental abilities or lack of experience and knowledge, if they are supervised or have been instructed to use the product in a safe manner and understand the potential dangers. Children shall not play with the appliance. Cleaning and maintenance performed by the user should not be done by children unless they are older than 8 years and under supervision. Children under 8 years old must keep away from the appliance and its power supply.

WARNING:

Do not use this appliance close to bathtubs, showers, washbasins or other places containing water.

WARNING

RISK OF EYE BURN

KEEP AWAY FROM CHILDREN

Do not immerse in water! – Do not immerse in water!

USING THE APPLIANCE

1. Carefully place the straightener on a firm, flat and heat resistant surface and make sure that the surface is not in contact with the plates of the straightener.
2. Plug the straightener in the electrical outlet and press and hold (for 2 seconds) the switch ④ to turn it on. The LED display will show the current temperature settings.
3. The default temperature setting is 180°C. Set the required temperature in range from 120 to 210°C. During the heating the temperature indicator flashes until the set temperature is reached.
4. Once the set temperature is reached (in about 30 seconds) the temperature indicator stops flashing and you can use the straightener.
5. Never use in combination with hair styling foam, hairspray, gel, etc.

Microprocessor control and temperature selection

Thanks to the highly sophisticated microprocessor and display, you can adjust the setting of the hair straightener according to your specific needs.

- Individual temperature setting: Using the temperature selection buttons ② and ③, you can set the working temperature in 30^ C steps in range from 120^ C to 210^ C . We recommend to use the following temperature settings:

Hair structure Temperature settings

Fine, coloured or bleached hair 120°C

Normal hair 150°C - 180°C

Strong, unruly hair 210°C

Creating a hairstyle

• Pay attention when using the appliance, the work surfaces have very high temperature.
• Make sure that the hair is completely dry before styling.
- To make it easier to style your hair, divide it in the middle or on the sides, and fasten the parts, which you are not straightening with clips.
• It is necessary to comb your hair before straightening it to disentangle it.
- Divide the hair into layers and start with straightening from the bottom layers. After straightening the bottom layers continue with the middle ones and finally straighten the top layers at the parting.
- When you have shorter hair, insert between the scalp and the straightener a comb to prevent contact of the skin with the hot plates. Do not use the hair straightener too close to the skin of the head, ears and neck.
- Switch the straightener off and disconnect from the outlet after use.
- You can finish the styling by application of hair balm. Rub the balm in with your palms with smooth motions from the roots to the tips.

Note: We recommend that people with dyed, fragile, damaged and fine hair use lower degree setting. To save time and effort, using the maximum amount of heat, established on the highest setting, is recommended for people with healthy, rough and resistant hair.

Automatic safety shutoff

- The appliance shuts down automatically after 30 minutes for safety reasons. If you want to continue with hair styling, simply press again the ON/OFF button ④.

Useful hair styling advice

- Straight hair

Insert a strand of hair about 5 cm wide between the ceramic plates, then press the handle and slowly glide with the straightener over the hair from the roots to the tips.

- Fine curls

Insert a strand of hair about 5 cm wide between the ceramic plates, then gently press the handle and slowly glide with the straightener over the hair from the roots to the tips; finally, wrap the hair around the plates.

- Outward curls

Insert a strand of hair about 5 cm wide between the ceramic plates, then press the handle and slowly glide with the straightener over the hair from the roots and finally turn their ends out.

- Inward curls

Insert a strand of hair about 5 cm wide between the ceramic plates, then press the handle and slowly glide with the straightener over the hair from the roots and finally gently turn the tips in.

CLEANING AND MAINTENANCE

• The unit does not contain inside any elements, which could be adjusted by the user, refer all repairs to qualified service personnel!
• Disconnect the appliance from the electrical output prior to performing any maintenance.
• The appliance shall only be cleaned when cool; clean the appliance regularly after every use!
• Do not use aggressive cleaning agents or abrasives for cleaning.
• Keep the working plates clean, without dust, dirt, hairspray and hair gel.
• Wipe the plates with moist cloth (not wet) and dry with soft dry cloth. Never clean the iron under running water, do not rinse or immerse the iron into water!

Hair straightener storage

- Before storing the hair straightener, make sure that it cooled completely and that it is clean and dry.

TECHNICAL DATA

Setting temperature (120–210 °C)

Nominal voltage: 100–240 V\~, 50/60 Hz

Nominal input power: 60–75 W

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product. Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with EU directives on electromagnetic compatibility and electrical safety.

Operating manual is available at website www.ecg-electro.eu. Changes of text and technical parameters reserved.

08/05

SICHERHEITSHINWEISE

Do not immerse in water! – Neponořovat do vody!

POKYNY K POUŽÍVÁNÍ

Do not immerse in water! – Neponárat do vody!

POKYNY NA POUŽÍVANIE

BEZBEDNOSNA UPUTSTVA

250 69 Klíčany, Czech Rep. e-post: [e-mail]

Hrvatski

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Klíčany, Czech Rep. e-mail: [e-mail]

Bosanski

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Kličany, Czech Rep. e-mail: [e-mail]

Latviešu valoda

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Klíčany, Czech Rep. e-pasts: [e-mail]

Lietuvių kalba

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Kličany, Czech Rep. el. paštas: [e-mail]

Magyar

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Kličany, Czech Rep. e-mail: [e-mail]

Polski

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Kličany, Czech Rep. e-mail: [e-mail]

Română

K+B Progres, a.s.

U Expertu 91 tel.: [phone]

250 69 Klíčany, Czech Rep. e-mail: [e-mail]

Slovenčina