PrecisionCare 5in1 - Shaver CECOTEC - Free user manual and instructions

USER MANUAL PrecisionCare 5in1 CECOTEC

Product illustration of a black and white electric toothbrush with four different accessories (no text or symbols visible)

Safety instructions 13

1. Parts and components 99

2. Before use

3. Operation

4. Cleaning and maintenance

5. Technical specifications

6. Disposal of old electrical and electronic

appliances

1. Technical support and warranty

2. Copyright

45

SOMMAIRE

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

- The device can be used by children aged 8 years and above and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge

if they have been given supervision or instruction concerning the safe use of the device and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.

- The appliance must be powered at a low safety voltage as stated on the marking.

- The device can only be used with the

supply unit provided with it.

- Check the power cable regularly for visible damage. If the power cable is damaged, it must be replaced with a special cable or set to be supplied by the official Cecotec Technical Support Service or the corresponding after-sales service to avoid any danger.

- This appliance is designed for domestic use only and is not intended for bars,

restaurants, farmhouses, hotels, motels, and offices.

- Ensure that the mains voltage matches the voltage specified on the device rating label and that the plug is earthed.

- Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before

handling the plug or switching on the appliance.

- Keep all packaging materials away from children. Risk of suffocation.

- This device must be checked frequently for signs of wear or damage. If such signs are present, or if the device has been used improperly, contact the official Cecotec Technical Support Service. Do not try to repair the appliance by yourself.

• Switch off the device immediately in the event of defects or malfunctions.
• Do not use accessories or parts that have not been provided by Cecotec
• Never leave the appliance unattended during use.
• Keep the appliance away from heat sources.

• Do not use an extension lead with this device.

• Do not use outdoors or operate it near flammable substances such as sprays.

• Do not try to open, disassemble, or repair the appliance by yourself. There are no serviceable parts inside the appliance.

• The appliance is exclusively designed for trimming natural hair. Do not use it to cut artificial or animal hair.

• Do not use the device if your skin or head skin is injured or suffers from any type of illness.

• Turn off and unplug the device from the power supply before assembling or disassembling attachments.

Battery instructions

• This appliance contains an irreplaceable battery.
• This appliance includes a Li-ion battery. Do not incinerate or expose it to high temperatures, as it may explode.

• WARNING: to recharge the battery, use only the power supply unit provided with the device, with reference KH6-050100EUF.

• Non-rechargeable batteries must not be recharged.

• Leaks from the battery or cells can occur under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid gets into contact with skin, wash immediately with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical

attention. Wear gloves to handle the battery and dispose of it immediately in accordance with local regulations.

• Keep batteries out of the reach of children when there is a risk of ingestion.
• Battery ingestion can cause burns, soft tissue perforation and death. Severe burns may occur within two hours of ingestion.

- In case of battery ingestion, please seek medical help immediately.

INSTRUCTIONS DE SÉCURITÉ

1. Shaving head
2. Power switch
3. LED charging indicator light
4. Body-grooming head
5. Head for ear and nose hair
6. Laminated shaving head
7. Lubricating oil bottle
8. Charger

9. Cleaning brush

10. Beard guide comb

11. Storage base

Note:

The graphics in this manual are schematic representations and may not exactly match the appliance.

2. BEFORE USE

- This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all

ENGLISH

packaging materials. You can keep the original box and other packaging elements in a safe place to prevent damage to the appliance if you need to transport it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.

- Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the Official Cecotec Technical Support Service immediately.

Box content

- PrecisionCare Extreme 5in1

- 4 interchangeable heads

• Adjustable guide comb, 0.5–10 mm.
• Adapter
• Storage base
• Lubricating oil bottle
• Cleaning brush
• Instruction manual

Charge the appliance for 2 hours for best operation before first use.

Do not remove the serial number of the appliance in order to keep a correct traceability of it in case of assistance.

ENGLISH

3. OPERATION

1. Select the attachment that best fits your needs.
2. Fix the desired attachment to the top part of the device body.

- To remove the shaving head or any other attachment assembled, hold the shaver body with one hand and slightly turn it counterclockwise with the other hand.

• To assemble a different one, insert the attachment into the shaver's slot, then turn it slightly clockwise to fix it in place.

• To assemble the beard guide comb attachment, insert the shaving head inside the guide comb and lock the attachment fixing tab in place.

• The guide comb attachment includes a length-adjustment knob. Length can be adjusted from 0.5 mm to 10 mm and adapted to the desired haircut.

• To remove the guide-comb attachment, pull the back part off the device until the fixing tab is released, then slide the comb off the blade.
• Slide the switch upwards to turn the device on and slide it downwards to turn it off.

Note

The length of the cut may vary depending on the trimming angle. Start with a longer guide-comb setting and progressively shorten

ENGLISH

the cutting length as the hair is cut.

Tips

- Ears and nose: when using the shaver to cut ear and nose hair, do not insert it more than 6 mm into the nostril or ear cavity. Turn it on and carefully move it in and out of the nostril or ear cavity.

- Nape/neck: use a hand mirror while cutting your own hair. Lift hair off the neck and place the index finger to cover and protect hairs that are not going to be cut. Carefully place the blades on the neck's surface and slowly move the groomer in an upward direction until it is stopped by the index finger.

- Shaving: switch the shaver on. Move it performing straight movements close to the surface of the zone you are going to shave. Use the shaving head without the guide comb when hair is shorter than 1 mm. Do not move the device in a circular motion.

Wet shaving

The device can also be used as a facial epilator on damp or slightly wet skin.

1. Apply some water to your skin.

2. Apply shaving foam or shaving gel to your skin.

3. Rinse the shaving unit under the tap to ensure that the shaving

ENGLISH

unit glides smoothly over your skin.

1. Move the shaving head in a straight motion over your skin.
2. Dry your face and thoroughly clean the shaving head after use.

Trimming with the guide-comb attachment

• The precision guide comb allows to cut the hair to different lengths.
• When trimming for the first time, start at the highest length setting to get familiar with the device and then adjust it to the desired length.
• Always slide the device in the direction of the guide-comb teeth, making sure that the smooth part of the comb is in full contact with the skin. This will ensure perfect results.

Body grooming

The device can be also used as a body groomer to trim hair from the back, shoulders, chest, abdomen, underarms, arms and legs. It has a unique-design surface that protects your skin from being scratched and scraped.

4. CLEANING AND MAINTENANCE

• Turn off and disconnect the appliance from the mains supply before cleaning, servicing it, or assembling or disassembling any of its parts.
• Do not use compressed air, abrasive cleaners, or scouring

ENGLISH

pads to clean the appliance.

• Do not immerse the appliance in water or any other liquid.
• To clean the attachments, remove them first, then brush them with the cleaning brush provided.
• Attachments are waterproof; therefore, they can be washed with water if necessary. Dry them thoroughly before storing or using them again.
• Clean the shaver and the attachments with the cleaning brush after each use. Remove the attachment and rinse it under warm running water. Do not use hot water.
• Warning: Do not rinse the laminated shaving head, as it is permanently lubricated.

Oiling blades

• Rinsing attachments under water requires lubricating the cutting blades once per month. Using only light-grade oils (e.g. sewing machine oil), simply spread 1-2 drops over the blades with the fingertip carefully. Wipe away all excess oil.
• Use only light-grade oils, as these will not evaporate.
• Do not use hair oil, grease, or any oil mixed with kerosene nor solvent, as these will evaporate and slow down the speed of the blades.

ENGLISH

5. TECHNICAL SPECIFICATIONS

Model: PrecisionCare 5in1

Product reference: 04741

Charger: Input: 100-240 V\~, 50/60 Hz, 0.2 A

Output: 5 V=, 1000 mA

Shaver: Input: 5 V..., 1000 mA

Battery: Li-ion 3,2 V, 500 mAh, 1.6 Wh

IPX5

Technical specifications may change without prior notice to improve product quality.

Made in China | Designed in Spain

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the appliance and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should

ENGLISH

dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

7. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs are carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

ENGLISH

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

9. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested to meet the required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity.

ENGLISH

Information requirement for external power supplies
Published information	Value and precision	Unit Notes
Manufacturer's name or trademark, commercial registration number and address	Ningbo KAM HOI Electronic Appliance Co., Ltd. Sanfengqiao, South-West Street, Yuyao, Zhejiang 315408 P.R. China	---
Model identifier KH6-050100	EUF ---

ENGLISH

Input voltage	100-240	V	Specified by the manufacturer. Shall be a value or a range.
Input AC frequency 50/60 Hz	Specified by the manufacturer. Shall be a value or a range.
Output voltage 5.0 V Rated output voltage. Shall indicate whether is AC or DC.In case more than one physical output or more than one output voltage is measured in load condition 1, the available sets of output voltage, output current and output power shall be published.
Output current 1.0 A Rated output current.			In case more than one physical output or more than one output voltage is measured in load condition 1, the available sets of output voltage, output current and output power shall be published.

ENGLISH

Output power 5.0 W Rated output power.			In case more than one physical output or more than one output voltage is measured in load condition 1, the available sets of output voltage, output current and output power shall be published.
Average active efficiency 74.52 (for 115 V, 60 Hz); 75.11 (for 230 V, 50 Hz)	% Declared by the manufacturer based on the value calculated as arithmetical mean of efficiency at load conditions 1-4.In cases where multiple average active efficiencies are declared for multiple output voltages available at load condition 1, the value published shall be the average active efficiency declared for the lowest output voltage.

ENGLISH

Efficiency at low load (10%)	-- % Declared by the manufacturer	based on the value calculated at load condition 5.External power supplies with a rated output power of 10 W or less shall be exempted from this requirement.In cases where multiple average active efficiencies are declared for multiple output voltages available at load condition 1, the value published shall be the value declared for the lowest output voltage.
No-load power consumption	0.04 (for 115 V, 60 Hz);0.07 (for 230 V, 50 Hz)	W Declared by the manufacturer based on the value measured for load condition 6.

FRANÇAIS

1. PIÈCES ET COMPOSANTS

Img. 1

Lubrificar as lâminas

Exploded view diagram of a hairbrush with numbered parts for identification

Fig./Img./Abb./Afb./Rys./Obr.1

PRECISIONCARE SIN1

www.cecotec.es