PRT 300 B2 - Lawn mower PARKSIDE - Free user manual and instructions

USER MANUAL PRT 300 B2 PARKSIDE

PDF ONLINE www.lidi-service.com

Black handheld tool with handle and spout, isolated on white background (no text or symbols visible)

Translation of the original instructions

NL BE

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

Service-Center......21

Importeur 21

Illustration of two workers using a tool, one bending forward and the other bending forward with a 30-degree angle marker (no text or symbols)

Intended purpose....22

General description......23

Extent of the delivery.... 23

Overview 23

Functional description 23

Technical data....23

Symbols and icons......24

Safety instructions....25

General safety instructions for power tools.... 25

Additional safety instructions......27

Residual risks 29

Assembling instructions......30

Operation....30

Turning on and off 30

Trimmer settings....31

Manner of operation......31

Cutting grass.... 31

Cleaning and maintenance......32

Cleaning 32

General maintenance....32

Replacing the spool 32

Winding up the spare thread ..... 33

Transport....33

Storage....33

Disposal and protection of the

environment 33

Guarantee 34

Repair Service....35

Service-Center......35

Importer 35

Trouble shooting....36

Replacement parts/Accessories ..36

Translation of the original

EC declaration of conformity ....203

Exploded Drawing......215

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product.

During production, this equipment has been checked for quality and subjected to a final inspection. The functionality of your equipment is therefore guaranteed.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal. Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified. Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended purpose

The appliance is solely intended for cutting grass and weeds in the garden and for edge trimming. Any other use that is not specifically approved in these Instructions can result in damage to the trimmer and give rise to serious danger for the user.

Do not use the appliance to trim hedges or bushes. The appliance must only be used by adults. Young people aged 16 and over may only use the trimmer under adult supervision.

The user or operator is responsible for accidents causing injury to other people or damage to property.

The manufacturer cannot be held liable for damage when the trimmer is not used in conformity with its intended purpose or due to incorrect operation.

This equipment is not suitable for commercial use. Commercial use will invalidate the guarantee.

General description

The illustration of the most important functional components

can be found on the fold-out pages.

Extent of the delivery

Carefully unpack the trimmer and check that it is complete:

• Grass Trimmer
• Protective cover with two screws
• Spool (already fitted)
• Phillips screws
• Auxiliary handle
• Instruction Manual

Overview

A 1 On/off switch

2 Upper handgrip
4 Power cable
5 Handle
6 Centre piece
7 Motor head
8 Protective cover
9 Cutting head
10 Auxiliary handle
11.1 Phillips screwdriver (large)
11.2 Phillips screwdriver (small)

D 12 Nut

13 Handle screw
14 Handle unit

G 15 Spool cover

15a Triangle marking
15b Line outlet loop, spool cover

16 Line spool

16a Line outlet loop, ring

17 Spring

18 Spool cap
19 Line cutter

20 Ring

21 Opening, spool

Functional description

The hand-held, portable electric lawn trimmer uses a fully automatic string spool for cutting.

A hood covering the cutting device protects the user.

Refer to the following descriptions for a functional description of the controls.

Technical data

Electric Lawn Trimmer ...PRT 300 B2

Nominal input voltage U ... 230 V\~, 50 Hz

Power consumption ....300 W

Idling speed 12500 min ^1 (rpm)

Protection Class ......II回

Protection category.....IPXO

Cutting circle 230 mm

Thread length 4 m

Thread thickness 1,6 mm

Weight .....approx. 1,55 kg

Sound pressure level

(L_pA) 77 dB (A), K_pA = 3 dB

Sound power level ( L_WA )

guaranteed 90 dB(A)

measured.....88.2 dB(A); K_WA=1.97 dB

Vibration (q_h) ......< 2,5 m/s², K= 1,5 m/s²

Noise and vibration values have been determined according to the standards and regulations mentioned in the declaration of conformity.

Noise and vibration values have been determined according to the standards and regulations mentioned in the declaration of conformity.

The stated vibration emission value was measured in accordance with a standard

GB MT

testing procedure and may be used to compare one power tool to another.

The stated vibration emission value may also be used for a preliminary exposure assessment.

Warning: The vibration emission value may differ during actual use of the power tool from the stated value depending on the manner in which the power tool is used.

Try to keep the exposure to vibrations as low as possible. Examples of measures to reduce vibration exposure are the wearing of gloves when using the tool and limiting the working hours. For this purpose all parts of the operating cycle have to be considered (for example, times when the electric tool is switched off and times when it is switched on but running without any load).

Symbols and icons

Symbols on the trimmer

WARNING!

Carefully read these Operating Instructions.

Wear goggles and ear defenders.

The cutting device will keep rotating for a few seconds after the device has been switched off.

Keep hands and feet at a safe distance.

Do not expose the trimmer to moisture. Do not work when it is raining and do not cut wet grass.

Keep by-standers well away. They could be injured by flung out objects.

Danger due to materials blown out of machine!

Remove persons in the vicinity from the danger area.

Unplug the connector immediately if the connection cable is damaged.

Always remove the mains plug during maintenance work.

Noise level rating L_WA in dB

Electrical appliances must not be disposed of with the domestic waste.

Protection class (ble insulation)

Cutting circle

23cm Cutting circle

Direction of line rotation

Loosening the spool cover

Fixing the spool cover

Symbols in the manual

Warning symbols with information on damage and injury prevention.

Warning symbols with in- formation on the prevention of personal injury caused by electric shock.

Instruction symbols with information on preventing damage.

Carefully read through the user manual

Help symbols with information on improving tool handling.

Safety instructions

Ensure that the safety instructions are observed when operating the trimmer.

General safety instructions for power tools

WARNING! Read all safety directions and instructions. Omissions in the compliance with safety directions and instructions can cause electrical shock, fire and/or severe injuries.

Retain all safety directions and instructions for future use.

The term "Power Tools" used in the safety instructions refers to mains-operated power tools (with power cord) and to battery-operated power tools (without power cord).

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention white operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-slip safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or car-

rying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjust -ments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result

in a hazardous situation.

h) Ensure that the vents are free of soiling.

i) Disconnect the mains plug/remove the rechargeable battery from the device

• whenever the user no longer remains in the vicinity of the machine.
• before the removal of blockages.
• before checking, cleaning or working on the machine.
• after touching a foreign body in order to check the machine for damage.
• for an immediate check if the machine begins to vibrate excessively.
  If the machine starts to vibrate abnormally, an immediate check must be carried out,
• search for signs of damage;
• have any necessary repairs carried out on damaged parts;
• examine for loose parts and tighten these.

5) SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety instructions

TRAINING

- The appliance is not suitable for use by children. Children must be supervised to ensure

GB MT

that they do not play with the device. Cleaning and maintenance must not be carried out by children.

• This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
• Local regulations or bylaws may determine the minimum age for using the device.
• The operator or user is responsible for accidents or damage to other persons or their property.
• Children and persons with limited physical, sensory or mental capabilities or inadequate experience and knowledge, or persons who are not familiar with the instructions, should never be allowed to use the machine! Local regulations may specify an age limit for the user.
• Never let children or persons who are not familiar with the instructions mentioned use the machine.
• Familiarise yourself with the controls and how to use the machine correctly.

PREPARATION

• Before each use, carry out a visual inspection on missing or wrongly mounted protective devices or parts of the cutting device.
• Before commissioning and after any impacts, check for signs of wear and damages, and have any necessary repairs performed.
  • Use only approved extension cables (H05VV-F) that are not

more than 75 m long and de- signed for outdoor use. Always roll out the cable drum com- pletely before use. Check the cable for damage and ageing.

- Do not connect a damaged cable to the power supply. Do not touch a damaged cable before it has been disconnected from the power supply, as you could come into contact with live parts.

- Prior to use, check the connecting cable and extension cable for signs of damage or ageing. If the cable is damaged during use, disconnect it from the mains immediately. DO NOT TOUCH THE CABLE BEFORE IT HAS BEEN DISCONNECTED FROM THE POWER SUPPLY. Do not use the machine if the cable is damaged or worn.

To unplug the cable from the socket, always pull on the plug, and never on the cable.

OPERATION

• Wear safety goggles, stable shoes and long trousers over the entire period of use of the machine.
• The use of the machine under bad weather conditions, especially in case of lightning risk, must be avoided.
• Warning! Do not touch any of the dangerous moving parts before you have unplugged the device from the mains supply and the moving parts have come to a complete standstill.
• Caution, risk of injury from cuts on hands and feet.

- Stop using the machine when persons, above all children, and house pets are in the vicinity.

- Use the machine only in daylight or with good artificial lighting.

- Always keep your hands and feet away from the cutting equipment, above all when you switch the motor on.

- Never install metallic cutting elements.

- Never use the machine with damaged or missing protective equipment.

- Avoid an abnormal body posture. Ensure secure footing at all times to maintain balance when working on slopes.

- Go slowly. Do not walk with the device in your hand.

• Always wear sturdy shoes and long trousers during operation of the machine.

- In the case of an accident or malfunction during operation, the device must be switched off immediately. Injuries must be properly treated or medical assistance sought. Read the „Trouble shooting” section to correct any malfunctions or contact our Service Centre.

- Extension cables must be kept away from dangerous moving parts to prevent damages to cables that can lead to contact with live parts.

- If the cable/extension cable gets damaged or becomes tangled during use, immediately turn off the mains and unplug the mains cable to disconnect the device from the mains supply.

• Use a circuit breaker device with an operating current of 30 mA or less.
• Keep connection and extension cables away from the cutting equipment.
  • Make sure to keep the ventilation openings free of foreign objects.
• If the mains connection cable of this device is damaged, it must be replaced by the manufacturer or their customer service or by a similarly qualified person in order to avoid hazards.

MAINTENANCE AND STORAGE

• Disconnect the mains before servicing or cleaning.
• Use only spare parts and accessories supplied and recommended by the manufacturer.
• The machine must be checked regularly and maintained. Have the machine repaired in a licensed workshop.
• When the machine is not being used, store it out of the reach of children.

Residual risks

Even if properly operating and handling this electric tool, some residual risks will remain. Due to its construction and build, this electric tool may present the following hazards:

a) Cuts
b) Ear damage if working without ear protection.
c) Damage to your health caused by swinging your hands and arms when operating the appliance for longer periods of time

GB MT

or if the unit is not held or maintained properly.

Warning! During operation, this electric tool generates an electromagnetic field which, under certain circumstances, may impair the functionality of active or passive medical implants. To reduce the risk of serious or lethal injuries, we recommend that persons with medical implants consult their doctor and the manufacturer of their medical implant before operating the machine.

Assembling instructions

Fitting the centre piece:

Insert the centre piece (6) on to the motor head (7).

1. Insert the handle (5) on to the centre piece (6).
2. Screw in the centre piece (6) using the 4 long Phillips screws (11.1).

Mounting the protective cover:

Place the protective cover (8) on the motor head (7).

1. Screw it in using the two short Phillips screws (11.2).

Mounting the auxiliary handle:

Unscrew and remove the pre-assembled nut (12) and bolt (13) of the auxiliary handle (10).

1. Pull the ends of the auxiliary handle (10) apart and slide them over the handle unit (14).

2. Screw on the auxiliary handle (10) with the handwheel bolt (13) and nut (12).

Operation

Caution: risk of injury! Do not operate the appliance without the protective cover. To operate the appliance, wear suitable clothing, eye and ear protection. Prior to every use, check that the appliance is operative. Do not lock the On/Off button in place. After releasing the On/Off button, the motor must switch off. Stop using the device if the On/Off button is damaged.

Please observe local regulations concerning noise protection.

Turning on and off

For transport safety during delivery, the cutting line is knotted at the end. The end with the knot is cut by the line cutter (19) the first time the cutting line is extended.

Maintain a firm stand and hold the appliance well with both hands and at some distance away from your body. Before turning on the appliance, check that it will not touch any objects.

1. Connect the machine to the mains voltage supply.

2. Ensure your stance is stable and hold the appliance tightly with both hands. Do not allow the spool cap to hit the floor.

3. To switch the device on, press the On/Off button (1).

To switch it off, release the On/Off button (1).

The device cannot be switched to continuous operation.

After the device has been switched off, the blade continues moving for some time. Allow the spool to come to a complete stop. Keep hands and feet at a safe distance! Risk of injury!

Remove grass cuttings regularly from the spool to make sure that cutting is not impaired.

Trimmer settings

To adjust the auxiliary handle:

The auxiliary handle can be set to various positions. Adjust the handle so that the spool cap is tilted slightly forward as you work

Loosen the nut (12) and adjust the auxiliary handle (10) to the desired position. Re-tighten the nut.

Extend the cutting line:

Your device is equipped with an auto-tap feed, i.e. the two lines are extended when you tap the cutting head on the ground. If the line is initially longer than the cutting circle, it is automatically shortened to the right length by line cutter.

Caution: Free the line cutter of any grass cuttings regularly so as not to impair the cutting effect.

Check the nylon line regularly for damage and make sure the cutting line still has the length specified by the thread cutter.

- If no line ends are visible: Replace the spool (G 16) (see "Cleaning and Maintenance").

- Setting the line length manually: Unplug the mains plug! Pull on the line end and press on the cutting head (A 9) repeatedly until the line end protrudes approx. 1 cm beyond the line cutter (G 19).

Manner of operation

WARNING. Danger of injury!

Do not cut moist or wet grass.

• Before starting the unit, make sure that the spool is not touching any stones, scree, or other foreign objects.
• Switch on the trimmer before you approach the grass that is to be cut.
• Do not overload the trimmer during operation.
• Avoid contact with obstacles (stones, walls, fences, etc.). The spool would wear out quickly.
• Avoid using the device in bad weather, especially if there is a danger of lightning!

Cutting grass

Illustration of two workers using a tool, one holding a device and the other bending over a 30-degree angle (no text or symbols)

Cut the grass by swaying the trimmer sideways to the right and left. Cut slowly while the trimmer is tilted forwards by approx. 30°. Cut tall grass by a

series of levels from top to bottom.

Cleaning and maintenance

Warning! Risk of injury from moving dangerous parts!

Contact our Service Centre about repairs and servicing not described in this manual. Only use OEM parts. Risk of injury!

Switch off the device and unplug the mains plug.

The following cleaning and servicing should be done regularly. This will ensure a long and reliable service life.

Cleaning

Do not spray the appliance with water and do not immerse it in water. Electric shock hazard!

• Keep clean the ventilation slots, motor housing and handles of the appliance. Use a damp cloth or a brush. Do not use cleaning agents or solvents. You may otherwise irreparably damage the appliance.
  • After every trimming session, remove grass and soil from the protective cover and the trimming assembly.
• Be careful with the line cutter. It can cause serious lacerations.

General maintenance

• Prior to every use, check the appliance for obvious defects such as loose, worn or damaged parts.
• Check covers and safety devices for damages and correct installation. Re-

place as necessary.

Replacing the spool

The correct winding direction of the spool is indicated on the spool itself.

1. Unplug the mains plug.
2. Open the spool cap (18) by holding the spool cap (18) firmly with one hand and turning the spool cover (15) in the direction.
3. Remove the spool cover (15) from the spool cap and take out the spool (16). Make sure not to lose the springs (17).
4. Press the line end of the new spool out of the spool slot.
5. Thread the end of the line through the line outlet loop (15b) in the spool cover (15).
6. Insert the new spool into the spool cap (18). The side of the spool on which the winding direction is indicated by an arrow must be visible after insertion.
7. Put the spool cover (15) back on the spool cap (18). Make sure that the triangle markings (15a) on the spool cover (15) and the spool cap (18) line up.
8. Screw on the spool cover (15) by turning it in the direction. Hold the spool cap (18) firmly with one hand.
9. Pull on the line end and press on the cutting head (A 9) repeatedly until the line end protrudes approx. 1 cm beyond the line cutter (19).

Check the line cutter (21). Never use the device without a string cutter or defective string cutter. If the line cutter is damaged, be sure to contact one of our customer service centres.

Standard strings available from DIY stores can also be used, allowing you to re-use empty spools (see "Technical data"). The winding direction is indicated on the spool (16).

Winding up the spare thread

1. Remove the empty spool, see section "Replacing the spool" points 1-3.
2. Take the ring (20) upwards away from the spool.
3. Thread an end of the spare thread through the opening (21) of the spool (16).
4. Wind the thread onto the spool (16). The winding direction is indicated on the top side of the spool (16).
5. Thread the end of the line through the line outlet loop (16a) in the ring (20).
6. Place the ring (20) onto the spool (16).
7. Thread the end of the line through the line outlet loop (15b) in the spool cover (15).
8. Insert the new spool into the spool cap (18). The side of the spool on which the winding direction is indicated by an arrow must be visible after insertion.
9. Put the spool cover (15) back on the spool cap (18). Make sure that the triangle markings (15a) on the spool cover (15) and the spool cap (18) line up.
10. Screw on the spool cover (15) by turning it in the direction. Hold the spool cap (18) firmly with one hand.
11. Pull on the line end and press on the cutting head (A 9) repeatedly until the line end protrudes approx. 1 cm beyond the line cutter (19).

Transport

Carry the device (switched off) with one hand at the upper handle (A 2) and one hand at the additional handle (A 10). Face the cutting unit towards the ground. This prevents any contact with the cutting unit during transport.

Storage

• Store the trimmer in a dry place well out of reach of children.
• Do not stand the trimmer on its protective cover. Suspend it by its upper handle in such a manner that the protective cover does not come into contact with other objects. This is because the protective cover could become deformed, thereby changing its dimensions and its safety properties.

Disposal and protection of the environment

The appliance, accessories and packaging should be properly recycled.

Machines do not belong with domestic waste.

• Take the device to a recycling plant. The plastics and metals in the unit can be sorted and appropriately recycled. Ask our Service Centre for details.
- Defective units returned to us will be disposed of for free.
- Throw the cut grass on the compost. Do not throw it in the normal household waste.

Guarantee

Dear Customer,

This equipment is provided with a 3-year guarantee from the date of purchase. In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.

If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may therefore be considered as wearing parts (e.g. Spool) or to cover damage to breakable parts (e.g. battery, charger, cutting plate, protective housing, switches).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided.

The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure quick handling of you issue, please follow the following directions:

- Please have the receipt and item number (IAN 384571_2107) ready as proof of purchase for all enquiries.

- Please find the item number on the rating plate.

- Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

- After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid

acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.

We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.

Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defective devices free of charge when you send them to us.

Service-Center

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IAN 384571_2107

MT Service Malta

Tel.: [phone]

E-Mail: [e-mail]

IAN 384571_2107

Importer

Please note that the following address is not a service address. Please initially contact the service centre specified above.

In the event of an accident or malfunction, disconnect the mains plug immediately! Failure to comply may result in injuries from cuts.

Problem Possible cause Corrective action
Appliance won't start	On/Off switch (A 1) defective	Send in to Service Centre for repair
	Motor defective
Intermittent operation	Internal loose contact	Send in to Service Centre for repair
	On/Off switch (A 1) defective
Much vibration Loud noise	Trimming assembly dirty Clean trimming assembly(see „Cleaning and maintenance”)
	Motor defective Send in to Service Centre for repair
Bad trim	The line spool (D 16) does not have enough cutting line	If necessary, extend the cutting line (see chapter “Device adjustments”)Replace the spool (D 16) (see “Cleaning and Maintenance”).
	Cutting line is not led out of the spool cover (G 15)	Remove the spool cover (G 15) and feed the cutting line through the openings to the outside, then reinstall the spool.

Replacement parts/Accessories

Spare parts and accessories can be obtained at www.grizzlytools.shop

If you have issues ordering, please use the contact form. If you have any other questions, contact the "Service-Center" (see page 35).

G 16

Line spool 13800032

G 17

Spring 91105867

Sommaire

Introduction ......37

Service-Center....54

Importateur ....54

Dépannage 55

Illustration of two workers using a tool, one holding a device and the other bending forward with a 30-degree angle marker (no text or symbols)

G 17 Ressort....91105867

Inhoud

Inleiding 56

Gebruik 56

Service-Center....71

Importeur 71

Foutmeldingen 72

Illustration of two workers using a tool, one holding a device and the other digging with a 30° angle marker (no text or symbols)

Service-Center......88

Importer 88

Illustration of two workers in protective gear performing manual labor, one bending forward with a 30° angle marker (no text or symbols)

Service-Center....103

Dovozce....103

Illustration of two workers in protective gear using a tool, with one holding a weight and the other bending over a 30-degree angle (no text or symbols)

Service-Center....120

Dovozca....120

Illustration of two workers in protective gear using a tool, with one holding a 30-degree angle marker (no text or symbols present)

Service-Center......134

Importør 134

11.1 Stjerneskrue (stor)

11.2 Stjerneskrue (lille)

D 12 Møtrik

Illustration of two workers in protective gear using a power tool, with one reaching toward the angle of 30 degrees (no text or symbols present)

Service-Center......152

Importador 152

Illustration of two workers using a tool, one holding a 30-degree angle marker (no text or symbols)

Service-Center......169

Illustration of two workers using a tool, one with a 30° angle marker and the other bending forward (no text or symbols)

Illustration of two workers in protective gear using a tool, with one holding a bucket and the other bending over a 30-degree angle (no text or symbols)

Illustration of two workers using a walking pushaxe, one holding a 30-degree angle marker (no text or symbols)

Kosite travo tako, da orodje premika- te levo in desno. Kosite počasi in med košnjo držite orodje nagnjeno naprej za pribl. 30°. Visoko travo

Pooblaščeni serviser:

Tel.: [phone]

E-Mail: [e-mail]

(Birotehnika, Hodošček Renata s.p., Lendavska ULICA 23, 9000 Murska Sobota)

Garancijski list

Translation of the originalEC declaration of conformity

We hereby confirm that theElectric Lawn TrimmerPRT 300 B2 seriesSerial number000001 - 220000conforms with the following applicable relevant version of the EU guidelines:

2006/42/EC • 2014/30/EU • 2000/14/EC & 2005/88/EC2011/65/EU* & (EU) 2015/863

In order to guarantee consistency, the following harmonised standards as well asnational standards and stipulations have been applied:

EN 60335-1:2012/A2:2019 • EN 50636-2-91:2014EN 55014-1:2017/A11:2020 • EN 55014-2:2015EN 61000-3-2:2014 • EN IEC 61000-3-2:2019EN 61000-3-3:2013 • EN 61000-3-3:2013/A1:2019EN IEC 63000:2018

We additionally confirm the following in accordance with the 2000/14/EC emissions guideline: Guaranteed sound power level: 90 dB(A)Measured sound power level: 88,2 dB(A)Compliance evaluation process carried out in accordance with Appendix VI,2000/14/ECRegistered Office: NB 0036, TÜV SÜD Industrie Service GmbH, Westendstrasse 199,80686 München, Germany

This declaration of conformity is issued under the sole responsibility of the manufacturer:

Grizzly Tools GmbH & Co. KGStockstädter Straße 2063762 Großostheim,Germany, 20.11.2021Christian FrankDocumentation Representative

* The object of the declaration described above satisfies the provisions of Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.

FSC www.fsc.org MIX Paper from responsible sources FSC® C163909

FSC www.fsc.org MIXTE Papier lissu de sources responsables FSC® C163909

IAN 384571_2107

8