DED6608 - Vacuum Cleaner DEDRA - Free user manual and instructions

USER MANUAL DED6608 DEDRA

EN Washing vacuum cleaner

EN Operating instructions with warranty card

Prací vysavač

Black and white photo of a vacuum cleaner with handle and control panel (no visible text or symbols)

All rights reserved. This work is protected by copyright. Copying or distribution of the User Manual in parts or in full without Dedra Exim's permission is prohibited

EN Dedra Exim reserves the right to make design, technical and completion changes without prior notice. These changes may not constitute grounds for advertising the product. User manual available at www.dedra.pl

Exploded view diagram of a spray gun with numbered parts and Chinese labels

F
Opis piktogramów / Popis použitých piktogramů / Opis používaných piktogramov / Panaudotů piktogramů aprašymas / Lietoto piktogrammu apraksts / Az alkalmazott piktogramok magyarázata / Interpretation des pictogrammes / Descripción de los pictogramas / Descrierea pictogramelor / Omschrijving van de gebruikte pictogrammen / Beschreibung der verwendeten Piktogramme / Description des pictogrammes

Nakaz: przeczytaj instrukcję obsługi / Prílkaz: přečtěte návod k obsluze / Prílkaz: oboznámte sa s užívateľskou príručkou / Privaloma: perskaitykite aptarnavimo instrukciją / Norādījums: rūpīgi iepazīstieties ar lietotāja rokasgrāmatā sniegto informāciju / Utasítás: olvassa el az útmutatót / Obligatoriu: citiți manualul de utilizare / Gebot: die Bedienungsanleitung lesen / Navodilo: preberite navodila za uporabo / Uputa: pročitajte korisnički priručnik / Заповедта: прочетete ръководството за употреба / Заборона: прочитайте інструкцію з експлуатації / Obligatorisch: Lesen Sie die Gebrauchsanweisung / Injonction : lire le mode d'emploi

PL Spis treści

EN Table of contents

1. Drawing and pictures

2. Safety precautions

3. Description of the device

4. Purpose of the device

5. Restriction on use

6. Technical data

7. Preparing for use

8. Switching on the device

9. Operation of the device

10. Ongoing maintenance

11. Spare parts and accessories

12. Troubleshooting on your own

13. Contents of the package

14. Information for users on the disposal of electrical and electronic equipment (applicable to households)

15. Warranty card

The declaration of conformity can be found at the manufacturer's premises.

General safety regulations are attached to the manual as a separate booklet.

WARNING. Read all warnings marked with the symbol and all instructions.

Failure to observe the following warnings and safety instructions could result in electric shock, fire or serious injury.

Keep all manual to the future use

2. Safety precautions

This equipment may be used by children of at least 8 years of age and by people with reduced physical and mental capabilities and lack of experience and familiarity with the equipment, if supervision or instruction is provided on how to use the equipment safely so that the associated risks are understood. Children should not play with the equipment. Unsupervised children should not carry out cleaning or maintenance of the equipment.

Warnings regarding hoover operation:

• Take precautions when maintaining the equipment.
• Unplug the appliance before cleaning or storing it. Only plug the hoover into the mains supply for the duration of its operation.
• Take care not to damage the hoover's power cord by running over, crushing, yanking, cutting, etc. during operation.

- All safety components must be kept in full working order. If they are damaged, they must be repaired or replaced immediately.

- Do not use the appliance if the power cord or plug is damaged. If the power cord or plug is damaged, take the appliance to a service centre for replacement of the cord or plug with a new one.

- Do not pull on the cord when removing the plug from the socket.

- Do not leave the hoover unattended when ready for use.

- Do not make the appliance available to children as a toy.

- Store the appliance away from heat sources (i.e. central heating, cooker, etc.) to avoid deformation of the plastic parts.

- When using the unit, do not block the air inlet. Otherwise, the dust absorption capacity will decrease and there is a risk of burning the motor.

- Smouldering cigarette butts must not be sucked in, otherwise the appliance may be damaged.

- When using the hoover, pay attention to clumps of hair or other debris so that they do not clog the air inlet (including the suction hose). Failure to do so may result in damage to the appliance motor.

- When using the blowing function, do not direct the airflow towards a source of open flame.

- The appliance is not suitable for vacuuming hazardous dusts.

- A device with a maximum power output of 2,000 watts may be connected to the connection socket on the hoover cover. Connecting appliances with a higher wattage may cause the hoover to malfunction.

- Working with a hoover is accompanied by a build-up of electrostatic charge, which can result in electrostatic discharge on contact with the user. This is a natural phenomenon. Use appropriate personal protection equipment (anti-electrostatic gloves, anti-electrostatic footwear).

3. Description of the device

Fig. A: 1) Vacuum function, 2) Wet cleaning function, 3) Top cover, 4) Water outlet nozzle, 5) Vacuum hose connection, 6) Latch, 7) Dirt container, 8) Base, 9) Front wheels, 10) Switch, 11) Transport handle, 12) Air outlet, 13) Power cord, 14) Water inlet nozzle, 15) Detergent water tank, 16) Rear wheels

4. Purpose of the device

The washing hoover model DED6608 is designed for dry or wet operation and allows the cleaning of hard surfaces (terracotta, panels, floors, etc.) and the extraction washing of soft surfaces such as carpets, rugs, car upholstery, etc. The extraction method involves spraying water under pressure with a cleaning agent and extracting it (extraction) in a flash using a special nozzle.

It is permissible to use the device in renovation and construction work, repair workshops, amateur work, subject to the conditions of use and permissible working conditions contained in the operating instructions.

5. Restriction on use

The appliance may only be used in accordance with the 'Permitted operating conditions' below. Unauthorised changes to the mechanical and electrical design, any modifications, maintenance operations not described in the operating instructions will be treated as illegal and will result in the immediate loss of warranty rights and the declaration of conformity will become invalid.

Misuse or use not in accordance with the operating instructions will result in immediate loss of warranty rights.

Permitted operating conditions'

S1 – continuous work

Indoor only

1. Technical data

Model type	DED6608
Rated voltage [V]	230
Frequency [Hz]	50
Rated input [W]	1400
Protection class	II
IP number	IPX4
Vacuum [kPa]	20
Tank capacity [L]	15
Weight [kg]	6

7. Preparing for use

All operations described in this chapter should be carried out with the battery disconnected.

Unlock the latches (fig. A, 6) and remove the top cover of the hoover (fig. A, 3). Remove all components from the duster tank, check that no parts are missing (see section 13. Package contents). Place the wheel ferrules into the holes in the base of the hoover.

Check that the water tank is correctly fastened. The spigot should be firmly placed in the hole in the hoover housing. Press the spigot locking button to remove the tank.

Place a filter (HEPA type for dry cleaning, sponge filter for wet cleaning) on the filter basket and close the top cover.

Insert the end of the hoover pipe into the spigot (Fig. A, 5). Insert the water inlet connector into the spigot (Fig. A, 14). Insert aluminium tubes into the end of the hoover pipe, connect the water inlet hose. Ensure that the quick couplings are tightly connected. When the spigot of the quick coupling is pressed in, a distinct click should be heard.

Place the appropriate nozzle (vacuum nozzle, wide nozzle for washing or narrow nozzle for upholstery washing) on the end of the aluminium tube. Both washing nozzles require the connection of a water supply hose.

Controlling the hoover

On the lid of the hoover there is:

- hoover switch (Fig. A, 1 / 10)

- washing button (Fig. A, 2).

These buttons allow dry vacuuming, wet cleaning, extraction washing.

8. Connecting to the mains

Before connecting the appliance to the power supply, ensure that the supply voltage corresponds to the value indicated on the rating plate. The power supply installation should comply with the essential requirements for electrical installations and meet the safety requirements for use. The parameters for the minimum cross-section of the supply cable and the nominal value of the fuse, depending on the power of the appliance, are given in the table below:

Unit power [W]	Minimum conductor cross-section [mm2]	Minimum fuse type C [A]
<1400	1,0	16

The installation should be carried out by a qualified electrician. When using extension cables, ensure that the conductor cross-section is not smaller than required (see table). Arrange the electrical cable so that it is not at risk of being cut during operation. Do not use damaged extension cords. Periodically check the condition of the power supply cable. Do not pull on the power cable.

9. Operation of the device

Before starting up the unit, it is essential to carry out the steps described in the section 'Preparing

for operation'.

Cleaning dry surfaces

Unplug the hoover from the power supply. Remove the top cover and place a HEPA type filter and a dust bag over the filter basket. Close the lid, connect the hose and aluminium tubes as indicated in step 7. Attach a wide brush to the end of the tube for vacuuming. Connect the hoover to the power supply. Start the hoover.

If the dust bag is full, the hoover motor will be noticeably louder. Switch off the hoover, unplug it from the power supply, remove the top cover and dispose of the spoil.

Cleaning wet surfaces

Disconnect the hoover from the power supply. Remove the top cover and place a sponge filter on the filter basket (do not use a HEPA filter for wet cleaning!). Close the lid, connect the hose and aluminium tubes as indicated in point 7. Attach a wide brush to the end of the tube for vacuuming. Connect the hoover to the power supply. Start the hoover. If the spoil hopper is full, the float in the filter basket will trip and the hoover will not suck up water. The hoover should then be switched off, disconnected from the power supply, the top cover removed and the collected water poured out. Remove the sponge filter from the filter

basket, wring out the water and put it back on the filter basket. The sponge filter can be washed under running water, dried and reused.

Washing mode

Disconnect the hoover from the power supply. Remove the top cover and place the sponge filter on the filter basket. Close the lid, connect the hose and aluminium tubes as indicated in step 7.

Pour water into the water tank (fig. A, 15) together with the detergent (check the proportions in which the mixture should be made up). Turn off the water tank. Connect the hose to the tank, push the end of the hose into the pump port on the hoover housing (fig. A, 14). Connect the hoses on the hoover tubes, Attach the washing brush to the end of the hoover tube (wide for washing large surfaces, e.g. carpets, rugs, etc., narrow for washing smaller or more inaccessible surfaces, e.g. car upholstery).

Connect the hoover to the power supply. Start the hoover and then activate the water feed pump by pressing the button above the water tank. A mixture of water and detergent will be fed through the hose system. To start the wash, press the drain button located at the handle of the flexible hose.

When the washing is complete, switch off the hoover using the power switch. Disconnect the hoover from the power source, remove the top cover, remove the dirty water from the tank.

Do not use high foaming detergents. Thoroughly mix the detergent and water to make the mixture as homogeneous as possible. An anti-foaming agent can be added to the mixture.

Do not run the hoover in wash mode if the laundry mixture tank is empty. Running it dry can burn out the pump.

Empty the wash tank as soon as the float is activated. After emptying the tank, dry it before using it again.

10. Ongoing maintenance

WARNING

All maintenance must be carried out with the unit unplugged.

Cleaning the tank

Remove debris from the tank frequently to avoid damage to the hoover. To clean the inside of the hoover, dispose of the dirt collected in the tank or pour it into a waste tank or sewer. Check that the tank is not wet, if so - dry thoroughly. Cleaning and drying the tank is particularly important, as bacteria and mould can grow rapidly due to the presence of moisture and heat.

Cleaning the HEPA filter

The HEPA filter can be cleaned with a jet of compressed air (using a compressor, for example) or rinsed under running water and allowed to dry. Do not use a wet filter in the hoover.

Cleaning the sponge filter

The sponge filter can be washed under running water, dried and reused.

Storage of the hoover

Store the cleaned, thoroughly dried hoover in the original box in a dry place, out of the reach of children and bystanders.

11. Spare parts and accessories

For the purchase of spare parts and accessories, please contact the Dedra Exim service. Contact details can be found on page 1 of the manual.

When ordering spare parts, please quote the batch number on the nameplate together with the part number from the assembly drawing.

During the warranty period, repairs are carried out in accordance with the terms of the warranty card. Return the faulty product for repair at the place of purchase (the dealer is obliged to accept the faulty product), send it to the central Dedra Exim service centre or to the service centre closest to your place of residence (list of service centres at www.dedra.pl). Kindly enclose the completed warranty card. After the warranty period has expired, repairs are carried out by the central service. Send the defective product to the service centre (shipping costs are paid by the user).

12. Troubleshooting on your own

WARNING

Disconnect the unit from the power supply before attempting to troubleshoot the unit yourself.

Problem	Cause	Solution
Unit does not switch on	The power cord is incorrectly connected or damaged	Push the plug further into the socket, check the power cord
	Mains voltage not present in the socket	Check voltage at socket, check fuse
	Switch is damaged	Have the unit repaired
	Dust container full	Empty the tank
Dust is coming out of the motor	Filter missing or damaged	Check that the filter is fitted to the filter basket. If damaged, replace filter with a new one.

Reduced efficiency	Hose or nozzle blocked.	Check nozzle and hose for blockage, remove cause of blockage.
	Filter clogged	Check and clean the filter
No spraying of washing mixture	Washing mode is not switched on	Press the wash mode button on the hoover or on the handle
	No fluid	Top up the fluid in the tank
	Hose is incorrectly inserted	Check that the suction is below the liquid level in the tank. Check that the hose is not kinked/tied.
Foam is ejected from the liquid feed outlet	Cleaning fluid is too foamy	Change the cleaner or use a defoamer

13. Contents of the package

1) Vacuum cleaner; 2) Hopper for washing compound; 3) Flexible hose; 4) Extensions -2 pieces; 5) HEPA filter; 6) Sponge filter; 7) Nozzle for washing large surfaces; 8) Wide dusting brush; 9) Crevice brush; 10) Narrow nozzle for upholstery washing; 11) Scoop bag

14. Information for users on the disposal of electrical and electronic equipment (applicable to households)

The symbol on the products or accompanying documentation indicates that defective electrical or electronic equipment must not be disposed of with household waste. If you need to dispose of, reuse or recover components, take them to a specialist collection point where they will be accepted free of charge. Information on the location of collection points for used equipment is provided by local authorities, e.g. on their websites.

By disposing of the appliance correctly, you will save valuable resources and avoid negative effects on health and the environment due to the possible presence of hazardous substances, mixtures and components in the appliance.

Incorrect waste disposal is subject to penalties according to the relevant local regulations.

Users in EU countries: If you need to dispose of electrical or electronic equipment, please contact your nearest point of sale or supplier, who will be able to provide further information.

Disposal in non-EU countries: This symbol only applies to countries within the European Union. If you wish to dispose of this product, please contact your local authorities or dealer for the correct method of disposal.

Warranty card

for

(product name)

Catalogue No: .... Lot No.: ....

(hereinafter called the product)

Product purchase date : ......

Seller's stamp

Date and seller's signature:

User's statement:

I confirm that I have been informed about the warranty conditions and the consequences of non-compliance with the guidelines in the Operating Instructions and the warranty. I am aware of the conditions of this warranty, which I confirm with my handwritten signature:

Date and place User's signature

I. Product liability

1. The Warrantor - Dedra Exim Sp. z o.o. with its registered office in Pruszków, address: ul. 3 Maja 8, 05-800 Pruszków, KRS 0000062517, District Court for the City of Warsaw in Warsaw, 14th Economic Division of the National Court Register, TIN 527-020-49-33, share capital: PLN 100,980.00.
2. The Warrantor provides the warranty for the Product from the Warrantor's distribution on the terms set out in this warranty.
3. Liability under the warranty shall only cover defects arising from causes inherent in the Product at the time of delivery to the User.
4. By virtue of the warranty, the User obtains the right to have the Product repaired free of charge, provided that the defect became apparent during the warranty period. The method of repair of the

Product is at the discretion of the Warrantor. If the Warrantor finds the repair impossible, the Warrantor reserves the right to replace the defective element or the whole Product for a defect-free one, reduce the price of the Product, or withdraw from the contract.

1. In relation to the User, who is not a consumer within the meaning of the Act of April 23, 1964, on Civil Code, the Warrantor's liability for damages resulting from this warranty and/or in connection with its conclusion and performance, regardless of the legal title, is limited to the maximum of the value of the defective Product.

II. Warranty period

Product components	Duration of warranty protection
DED6608	36 months from the date of purchase of the Product as shown on this warranty card

III. Terms and conditions of the warranty

1. Presentation by the User of a completed warranty card for the Product and substantiation by the User of the circumstances of purchase of the Product, e.g. by presenting a receipt, invoice, etc. For the purpose of efficient complaint processing, it is recommended that the User submits, together with the Product, all the components specified in "Set of the device components" contained in the operating instructions.
2. Compliance by the user with the instructions in the operating instructions and the warranty.
3. The warranty only covers the territory of the Republic of Poland and the EU.
4. The warranty does not cover any Product defects arising in particular from:

a. Failure of the user to comply with the conditions set out in the operating instructions, in particular with regard to correct operation, maintenance and cleaning;
b. Use of cleaning or maintenance products by the user which do not comply with the operating instructions;
c. Improper storage and transport of the Product by the User;
d. Unauthorised changes and/or modifications to the Product by the User which have not been agreed with the Warrantor;
e. Use of consumables by the User in the Product which do not comply with the operating instructions.

1. For the User, who is not a consumer within the meaning of the Act of April 23, 1964 of the Civil Code, the warranty becomes void for the Product where:

a. serial numbers, date indications and rating plates have been removed, altered or damaged by the user;
b. the seals have been damaged by the user or show signs of tampering by the user.

1. Note! The User shall carry out the activities connected with the daily operation of the Product, resulting, among others, from the operating instructions, themselves and at their own expense.

IV. Complaint procedure

1. If you find that the Product is not working properly, make sure that all the steps specified in the operating instructions have been carried out correctly before submitting a claim.
2. It is recommended to make a complaint immediately, preferably within 7 days of noticing a defect in the Product. The User, who is not a consumer within the meaning of the Act of April 23, 1964 Civil Code, loses rights arising from this warranty if they fail to make a complaint within 7 days.
3. Complaints can be made, among others, at the point of purchase of the Product, at the warranty service point, or in writing to the following address: Dedra Exim Sp. z o.o., ul. 3 Maja 8, 05-800 Pruszków.
4. The User can make a complaint using the form available on the website www.dedra.pl. ("Warranty Claim Form").
5. The addresses of the country-specific warranty service are available at www.dedra.pl. If no country-specific warranty service is available, we recommend that you address warranty claims to: Dedra Exim Sp. z o.o. ul. 3 Maja 8, 05-800 Pruszków (Poland).
6. With a view to the safety of the User, the use of a defective Product is prohibited.
7. Caution: Using a defective Product is dangerous to the health and life of the User.
8. The fulfilment of the obligations under the warranty shall take place within 14 working days from the date of delivery of the defective Product by the User.
9. Before the defective Product is delivered under the complaint procedure, it is recommended to clean it. The Product under complaint is recommended to be carefully protected against damage during transport (it is recommended to deliver the Product under complaint in its original packaging).
10. The warranty period shall be extended by the time during which, due to a defect in the Product covered by the warranty, the User was not able to use it.

The warranty shall not exclude, limit or suspend the User's rights under the warranty regulations for defects of the goods sold.

Pursuant to Article 13(1) and (2) of Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46/EC (hereinafter: 'RODO'), we inform you that

1. The administrator of your personal data provided in the form is DEDRA-EXIM sp. z o.o. with its registered office in Pruszków, ul. 3 Maja 8, 05-800 Pruszków (hereinafter: 'Administrator').
2. Your data will be processed exclusively for the purpose of implementing the warranty procedure for the device on the basis of Article 6(1)(b) of the General Data Protection Regulation (hereinafter: 'RODO') Provision of data is voluntary, but necessary for the implementation of the warranty procedure.
3. Your data will be processed for the period of consideration of the implementation of the guarantee procedure and for archiving purposes in case of the need to defend against possible claims against the Administrator, no longer than until they expire.
4. Your data may be disclosed only to entities processing data for the Administrator on the basis of a written agreement of entrustment of personal data processing providing, among others, technical support, hosting or maintenance of the website, IT support, courier company. The Administrator's providers are obliged to ensure data security and to comply with the requirements of the applicable law related to personal data protection and may not use the entrusted personal data for purposes other than those specified in the contract with the Administrator.
5. Your data will not be processed in an automated manner including profiling and will not be transferred to a third country/international organisation.
6. You have the right of access to the content of your data and the right to rectification, erasure, restriction of processing, the right to data portability, the right to object, at any time.
7. For all matters related to the processing of your personal data by the Controller, you can contact: [e-mail];
8. You have the right to lodge a complaint with the supervisory authority dealing with personal data protection.

CZ Obsah