BC.041N - Coffee machine Beper - Free user manual and instructions

USER MANUAL BC.041N Beper

Precautions Read the following instructions carefully, since they give you useful safety information about installation, use and maintenan- ce and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing ma- terial in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually infor- mation to the manager of the Sanitation Department of your own mu- nicipality. If the supply cord is damaged, it must be replaced by the manufac- turer, its service agent or similarly qualied persons in order to avoid a hazard. Before connecting the appliance make sure that the mains voltage corresponds to the data specied on the label. The appliance can be damaged if the voltage is not correct. If the plug does not suit the socket, let it be replaced with another suitable plug by qualied personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption. Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded. Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manu- facturer cannot be responsible for any damages deriving from impro- per, wrong or incautious use.Electric Espresso Coffee Maker Use instructions

This appliance is for household use only. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other uids. Do not use the appliance near explosives, highly ammable mate- rials, gases or burning ames. Do not allow children, disabled people or every pe- ople without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children. Safety warnings This machine has been manufactured to “make coffee”. Never use other extracts, cocoa powder, chamomile, other infusions or soluble substances: these may block the holes in the lter. During cleaning, never immerse the base and the boiler in water: this is an electrical appliance. Be careful to avoid being scalded by spraying water or steam or due to the improper use of the appliance. When using the appliance do not touch the hot surfaces. Use the buttons or handles. Fill the boiler with water before placing the coffee maker on the support structures. Do not let the power cord come into contact with the metal parts of the cof- fee maker when it is running. The support base and the boiler become very hot during operation, do not touch these parts to avoid the risk of scalding. Do not lift the lid while the coffee maker is running; wait a few minutes after switching off before lifting the lid as the sudden release of steam could cau- se burns. Do not leave the power cord plugged in unnecessarily, always unplug it when not using the coffee machine. Do not pull on the power cable to unplug it. If the cable is damaged, replace it by contacting authorized centres only. Do not immerse the coffee maker in water or other liquid and avoid letting liquids inltrate.Electric Espresso Coffee Maker Use instructions

Do not expose the coffee maker to sources of humidity and do not use it outdoors. In the event of liquid inltration into the body of the coffee maker, imme- diately disconnect the plug from the electrical socket and have the coffee maker repaired by qualied personnel. Do not touch the coffee maker and the power cord with wet hands. The coffee maker is designed to be used exclusively for home use, it is not designed for commercial use. Product description Fig. A

1. Time: Press and hold to set current time.

2. Display: Format hour : minute.

3. Timer: Press and hold to set the desire time you want to start brewing.

4. Hold key: Synchronization started with on/off, by pressing this key all the other keys do not work, for unlock

hold it for 3 seconds.

5. On/Off: Press to start brewing directly, synchronization started with key lock, the coffee maker switches off

automatically after 30 minutes.

6. Timer on: Press and the timer turns on, the light turns on. Synchronization started with key lock.

Important: the rst time that the coffee maker is used, all the accessories should be washed with hot water. Then make a few batches of coffee to throw away. Preparing the coffee maker Fig. C Place the appliance on a stable and at surface away from water taps and sinks. Check that the voltage of the mains power supply corresponds to the value indicated on the appliance’s rating plate. Only connect the appliance to a power outlet properly earthed. The manufacturer declines all liability for any accidents caused if the system is not correctly earthed. If the power outlet does not match the plug on the appliance , use an adequate adaptor. When connecting the base to the mains, the electronic control emits an acoustic signal; when the ashing dashes appear on the display, you can set the time of day or prepare coffee immediately. Follow the instructions as shown in gure C

1) Check that the coffee maker is cold, and then unscrew it by holding the boiler with one hand and turning the

pitcher anticlockwise with the other and remove the funnel.

2) If you want to prepare 3 cups of coffee, ll the boiler with fresh water until reaching the safety valve ( visible

inside the boiler),without exceeding it. Or, to prepare 1 cup, ll the boiler with water to the mark (aprox. 2 centi- metres) below the safety valve. Tip: use fresh and soft water. Salty or hard water will weaken the ower.Electric Espresso Coffee Maker Use instructions

Important: do not use the coffee maker without water in the boiler and moreover do not use hot water for faster operation.

3) Insert the funnel lter in the boiler.

4) To prepare one cup of coffee, also insert the adapter in the funnel lter.

5) Fill the funnel lter with ground coffee, without pressing it . Fill it a little at a time to prevent spilling the ground coffee. Distribute the ground coffee uniformly and remove any excess coffee from the edge of the lter. Important: use good quality, medium-ground coffee, for moka coffee makers. Do not use barley coffee.

6) Tighten the coffee maker securely , without exaggerating, holding the boiler with one hand and turning the

pitcher clockwise with the other, without pushing on the handle.

7) Close the lid and place the coffee maker on the base.

8) Every so often check that the holes in the disk lter are not blocked; if necessary, clean it by using a pin.

Manual ignition Press the “on/off” button. The on/off light indicates that the coffee maker is working, while the “key lock” light indicates that the key lock function is active. The coffee will start to come out after a few minutes. Brewing will be completed in 4-5 minutes. The coffee maker will automatically turn off after the “on / off” light has been on for 30 minutes. Programmed self-ignition This function allows you to program the self-start time of the appliance, for example in the evening for the fol- lowing morning. Operate as follows: Set the exact time Press and hold the “time” button to set the exact time. (Each short press will advance the time by one minute, hold down to advance the time quickly). Set the switch-on time Press the “timer” button, and keep it pressed until the desired switch-on time is reached. At any time it is possible to view the programmed time by pressing the “timer” button, after a few seconds the current time reappears on the display. Once the coffee maker has been prepared and the desired ignition time has been programmed, press the “timer on” button; the programmed power-on light and the “key lock” light come on. At the programmed time, the programmed on light will go out and the “on/off” light and the “key lock” light will come on to signal that the appliance starts to heat the water. Brewing will be completed in 4-5 minutes. The coffee maker will turn off after the “on/off” light has been on for 30 minutes. if you want to turn off the “key lock” function, just hold the key in question for 3 seconds; now you can turn off the coffee maker. At the end of the brewing When the brewing is complete, stir the coffee before serving. Note: the time will start again from scratch when it reaches 24:00, which means that the timer can run for up to 24 hours. Memory function: if 7.00 is set as a time for coffee preparation, at 7.00 every morning the coffee will be prepared, without resetting it every day (unless the user does not change it). Practical example Let’s say it’s 9:00 pm. if you want to drink coffee at 07:00 am the following morning, simply set the timer pro- grammed as follows: Connect the coffee maker to the electrical outlet. Press and hold “time” to set the time to 21:00. Hold “timer” to set the time for 07:00. Press the “timer on” button to activate the timer.Electric Espresso Coffee Maker Use instructions

Coffee brewing starts automatically when the clock on the display is at “07:00”, the “timer on” indicator goes off, in the meantime the “on / off” indicator lights up. When it is 07:30, the coffee maker turns off and the lights go out. Keep warm function With the keep warm function can be drunk hot coffee at the right temperature for more than half an hour after switching on the machine. This function is automatically activated each time the unit will be switched on. Cleaning and maintenance Before performing the cleaning operations after use, wait for the machine to cool down. Clean the inside of the dispenser periodically. Regularly check the funnel and the gasket. Replace if there are signs of wear or deterioration. Use only original spare parts. Occasionally check that the lter holes are not blocked, if necessary, clean with a pin (Fig. C, point 8). Do not wash the coffee machine in the dishwasher. Do not use solvents or abrasive detergents to clean the boiler. It is sufcient to clean it with a sponge, keeping attention not to wet the electrical parts. When removing the disc lter for cleaning or to replace the gasket, remember to reinsert it correctly to avoid dangerous splashes of hot water. Do not rinse the boiler under the water tap and do not immerse in water. (Fig. D) Battery Under the base of the coffee maker there is a battery compartment, in which it is possible to insert a 3V CR2032 button battery (not included). The battery is used to keep the settings set once the plug is removed from the socket. The timer continues to operate, even if no writing appears on the display. Example: if at this moment the display shows 8.00 and I remove the plug for an hour, when I put the plug in the socket the display will automatically show 9.00. To replace the battery, follow the instructions below (Fig. E): Insert a screwdriver into the battery cover and turn anticlockwise to open the compartment. Remove the exhausted battery and insert the new battery paying attention to respect the polarity. Replace the battery cover and tighten it tightly to close it. Technical data Power: 400 W Power supply: 220-240V ~ 50/60Hz Use battery CR2032, 3V (not included) For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.Electric Espresso Coffee Maker Use instructions

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. GUARANTEE CERTIFICATE This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap- plies to material and production defects. The purchase receipt and the guarantee certicate must be submitted together in case of claim to guarantee. The guarantee is valid only with a guaranty certicate and proof of purchase (scal receipt) indicating the date of purchase and the model of the appliance For any technical assistance, please contact directly the seller or our head ofce in order to preserve the applian- ce’s efciency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee. GUARANTEE CONDITIONS If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that: - The appliance has been used properly and for the purpose for which it has been intended. - The appliance has not been tampered with, otherwise it is not maintainable. - The purchase receipt shall be presented. - The appliance showing a fair wear and tear shall not be covered by this guarantee. Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier. For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product Contact your distributor in your country or after sales department Beper. E-mail [e-mail] which will forward your enquiries to your distributor.ES