Beper — 116 free PDF user manuals

Q: How to heat milk with my Beper 90.514 frother?

To heat milk with your Beper 90.514 frother, you have two options depending on your needs: Option 1: Heating with frothing Fill the jug between the min/max lines Leave the accessories (double whisk) in place Press the on/off button A purple light will turn on, then blink red after about 100 seconds (end of cycle) Maximum capacity: 168 ml Option 2: Heating only (without frothing) Remove the whisk from the jug Fill the milk between the min/max lines Press the on/off button A purple light will turn on, then blink red after about 100 seconds Maximum capacity: 240 ml Achieved temperature: about 65°C, which is the ideal temperature to ensure the coffee's flavor is not compromised. Tip: Wait at least 2 minutes between each cycle for the thermostat to reset. For best results, use whole milk containing more than 3% fat.

Q: How to use the fan without heating on the Beper P203TER001?

To use the fan only without heating on the Beper P203TER001: Press the ⏻ (Power) button located on the control panel The fan-only mode is activated: the ✧ symbol lights up on the screen You can adjust the fan intensity (low or high) by pressing this button again This works regardless of the temperature setting you had previously defined. The heater blows ambient air without producing heat, ideal for hot weather.

Q: My Beper 90.514 milk frother won't turn on, how do I restart it?

If your Beper 90.514 milk frother does not turn on, please perform the following checks: Preliminary Checks Power Supply - Ensure that the device is plugged into a functional 220-240V outlet. Test the outlet with another device to confirm it is working. On/Off Button - Press firmly on the power button. A purple light should turn on at startup (followed by a red light at the end of the cycle, about 30 seconds). Jug Position - Check that the jug is correctly positioned and locked onto the base of the device. Milk Level - Ensure there is milk between the min/max marks engraved on the jug. The device only activates if milk is present. Visual Inspection Check if the whisk is properly inserted into the jug. After use, regularly clean the inside of the jug and the whisk, as a buildup of dry milk can sometimes hinder contact. If the Issue Persists This manual does not detail a complete troubleshooting procedure. If after these checks the device still does not turn on, contact the authorized Beper service center by sending an email to assistanza@beper.com . Your device comes with a 24-month warranty covering manufacturing defects. The receipt will be necessary for service.

Models Beper most viewed

Beper

User manual Beper : user manuals and guides in PDF

Models Beper most viewed

Browse manuals Beper by appliance type

Recent questions about devices Beper