Beper 90.514 - Milk frother

90.514 - Milk frother Beper - Free user manual and instructions

Find the device manual for free 90.514 Beper in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

View the manual : Français FR Deutsch DE English EN Español ES Italiano IT
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Milk frother
Brand Beper
Model 90.514
Power supply 220-240 V ~ 50/60 Hz
Power 500 W
Maximum capacity (cold foam) 145 ml
Maximum capacity (hot foam) 168 ml
Maximum capacity (heating) 240 ml
Heating temperature Approximately 65 °C
Carafe material Stainless steel with non-stick coating
Accessories included Whisk, transparent lid, silicone seal
Functions Cold foam, hot foam, heating
Indicator light Purple (heating), blue (cold), red flashing (end)
Safety Automatic shut-off after cycle, overheat protection
Cleaning Hand wash carafe and accessories; wipe base with a damp cloth
Maintenance Do not use abrasive products or metal brush
Approximate dimensions 12 cm diameter, 20 cm height
Approximate weight 0.8 kg
Warranty 24 months (except for wear parts)
Use Household use only

Frequently Asked Questions - 90.514 Beper

Can I froth plant-based milk (soy, almond) with this frother?
Yes, but results may vary. Whole milk (>3% fat) gives the best foam. Plant-based milk froths less and may require a longer time.
How to clean the Beper 90.514 milk frother?
Unplug the appliance and let it cool down. Wash the carafe and whisk by hand with warm water and mild detergent. Never immerse the base in water. Wipe the base with a damp cloth.
What to do if the frother does not turn on?
Check that the plug is properly connected and the outlet works. Ensure the carafe is correctly placed on the base. If the problem persists, contact after-sales service.
Can I use the frother without the whisk?
Yes, for the heating function only, remove the whisk. For hot or cold frothing functions, the whisk is necessary.
How long does it take to heat the milk?
The heating cycle lasts about 100 seconds. The milk reaches about 65°C, ideal temperature for a cappuccino.
The red light flashes after each cycle, is this normal?
Yes, it's normal. The red light flashes for about 30 seconds to indicate the end of the cycle. Then the appliance automatically turns off.
Can I add cocoa powder or flavors to the milk?
Yes, but make sure to clean the appliance thoroughly after each use to prevent residues. Particles may stick to the non-stick coating.
What is the maximum capacity for cold foam?
The maximum capacity for cold foam is 145 ml (level indicated by the symbol on the carafe). Do not exceed this limit to avoid overflow.
Can I reuse the frother immediately after a cycle?
It is recommended to wait about 2 minutes between cycles to allow the thermostat to reset.
Is the frother suitable for heating water or other liquids?
No, this appliance is designed only for milk. Using it with other liquids may damage the appliance and void the warranty.

User questions about 90.514 Beper

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Milk frother in PDF format for free! Find your manual 90.514 - Beper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 90.514 by Beper.

USER MANUAL 90.514 Beper

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Beper

Model : 90.514

Category : Milk frother