50.945 - Iron Beper - Free user manual and instructions
Find the device manual for free 50.945 Beper in PDF.
| Product Type | Clothes Iron |
| Brand | Beper |
| Model | 50.945 |
| Power | 2200 W |
| Water Tank Capacity | 300 ml |
| Soleplate | Ceramic |
| Steam Function | Continuous steam up to 25 g/min, steam shot up to 100 g/min |
| Spray Function | Yes |
| Anti-drip System | Yes |
| Anti-scale System | Yes, self-cleaning |
| Automatic Shut-off | Yes, after 8 minutes of inactivity |
| Cord | 1.8 meters, swivel |
| Weight | 1.2 kg |
| Dimensions (L x W x H) | 28 x 12 x 15 cm |
| Power Supply | 220-240 V, 50/60 Hz |
| Maintenance | Clean the soleplate with a damp cloth, descale regularly |
| Safety | Thermal fuse, automatic shut-off |
| Spare Parts | Soleplate, water tank, steam button (available) |
| Repairability | Repairability index not provided |
| Package Contents | Clothes iron, measuring cup, user manual |
Frequently Asked Questions - 50.945 Beper
User questions about 50.945 Beper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Iron in PDF format for free! Find your manual 50.945 - Beper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 50.945 by Beper.
USER MANUAL 50.945 Beper
READ THE FOLLOWING INSTRUCTIONS CAREFULLY, SINCE THEY GIVE YOU USEFUL SAFETY INFORMATION ABOUT INSTALLATION, USE AND MAINTENANCE AND HELP YOU AVOID MISHAPS AND POSSIBLE ACCIDENTS.
Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Do not pull the mains cable or the appliance itself when disconnecting the plug from the socket.
Do not let cord hang over edge of table, or touch sharp or hot surface.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. This appliance is for HOUSEHOLD USE ONLY.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other liquids.
Before cleaning or care, always unplug the appliance from the socket.
Do never immerse the appliance into water or other liquids.
Do not touch the appliance with damp or wet hands/feet.
Do not use the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain, sun ...
Do not let the appliance near to a heat source (ex. heater)
Do not let children, disabled people, or people without experience using this appliance without supervision.
Make sure children do not play with the appliance.
If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable, especially for children who could play with the appliance.
USE ADVICE
Make sure that the mains voltage corresponds to the data specified on the label.
Do not used the iron if the cord supply or plug are damaged or in case of electric shock make it repaired by an authorized assistance centre.
When using the iron for the first time remove the protection on the soleplate.
When used for the first time the soleplate may diffuse a light smoke caused by evaporation of protective oil used in factory; that is not dangerous and smoke will disappear after some use.
The iron may contain some residues into the tank; when used for the first time the iron, release the steam several times steam in order to eliminate the internal residues
Never pull the supply cord to unplug the appliance.
Do not roll up the electric cord around the iron.
Keep away to a reasonable distance the supply cord from the iron plate, especially when it is hot.
When making a break or if not used, put the iron on the iron rest in vertical position.
Fill or empty the tank when the appliance is unplugged from the socket.
Do not fill the tank over his maximum capacity.
Do not fill with mixture stain-removing, vinegar, scaling or chemical agent, but use only distilled or demineralised water.
The plate of the iron becomes very hot, take care not to burn yourself.
Never direct the jet of steam towards your face.
Always choose the right temperature according to the cloth which has to be ironed.
Do not use the stream station as a heater. Do not iron the wet clothes, let them dry before ironing.
Do not pass the iron on buttons or zipper in order to not to damage the plate.
Before cleaning, unplug the supply cord.
If you no longer use this appliance, please keep away from children.
DESCRIPTION
| 1 – Water spray | 7 – Cord supply |
| 2 – Water tank lid | 8 – Temperature light indicator |
| 3 – Steam control | 9– Water tank |
| 4 – Steam spray button | 10 – Temperature control |
| 5 – Water spray button | 11 – Auto-cleaning button |
| 6 - Rotary cord supply | 12 – Max. capacity water indicator |
| 13 – Ceramic soleplate | |
| USE INSTRUCTION | 14 – Measuring glass |
HOW TO USE IT
During the first use, a light smoke caused by the evaporation of the protective oil applied in manufacture may appear; this is normal and after some use, the smoke will disappear.
Before using the iron make sure to remove all stickers or protective film, if necessary use a soft cloth.
Pay attention not to scratch the soleplate with mettalic objects such as zip, butons, etc.
Check if the tank is full of water; to use steam system fill the tank with water (see paragraph below).
Before connecting the cord supply on the socket, please check the main voltage.
ATTENTION : THE SOLEPLATE ISVERY HOT, DO NOT TOUCH WHEN USING !
KEEP AWAY FROM CHILDREN.
IRONING
1 - Set the temperature on position "MIN".
2 – Fill the tank with the desired quantity of water.
3 – Put the iron on vertical position, the soleplate must not touch objects or other.
4 – Plug the cord supply on the socket.
5 - Set the temperature on the desired temperature, and refer to symbols on the temperature button.
6 - Start ironing
7 - When complete, put the iron in vertical position and unplug the cord supply from the socket.
The iron must always be in movement on the cloth to avoid any risk of burns on it.
TEMPERATURE SETTING
Always consult the labels of washing and sharpening inside clothing. If you cannot find them and if you do not know the type of fabric, please refer to the table below:
The numbers of points on the iron temperature adjustment button (1) indicate the lower (•) and higher (•••) temperature.
| Kind of fabric | Temperature position | Ironing instructions |
| AcetateAcrylicNylon | ● | Ironing without steam. Follow the instructions indicated on clothing. This type of fabric requires a very soft ironing. |
| PolyesterViscose | ● | Ironing without steam.Ironing on the back of clothing. Select the lowest temperature for ironing mix fabric. |
| Silk | ●●● | Ironing without steam.Ironing on the back of clothing. |
| WoolLight cottonLight linen | ●●● | Ironing with steam.Ironing on the back of clothing. Put a wet cloth on the fabric in order to avoid the “brilliant “effect. |
| Cotton Thin linen Starched fabrics | ●●●● | Ironing with steam.Moist the fabrics before ironing. The thicker and starched fabrics must be a little wetter than the light fabrics which can be ironed directly: the dark colours and clothing with embroidery must be ironed on the back. |
| Linen | ●●●● | Ironing with vapour.Use a lot of steam and iron the dark clothing on the back in order to avoid the “brilliant “effect. |
The table is valid for fabrics and not for brilliant surfaces, with relief printings or folds which must be ironed with low temperature. Before using the iron, always make sure that the temperature of iron is adapted to the type of fabric: wool with wool, cotton with cotton, etc.
The iron heats quickly and cools slowly; thus always start with clothing which requires a low temperature (like synthetic fabrics) and always progress with the highest temperatures.
When the cloth is made of several fabrics, set the temperature for the most delicate fabric.
If you do not know the type of fabric we recommend to iron the internal parts of clothing, from lowest temperature, and then finding the temperature more adapted. If clothing becomes “brilliant”, stop immediately in order to not damage it. Then start to iron it on the back.
N.B. Pay attention to the symbol
that means that the fabric must not be ironed.
STEAM IRONING
Before plugging the appliance, make sure the tank is full of water.
Check the steam indicator is on position « steam »
to use steam function.
When used for the first time, press several times steam switch, in order to eliminate dirt, residue from the manufacture.
Steam ironing is possible when setting the thermostat on symbol ( ) ; when the temperature increased the steam also increase until symbol max. ( ... ).
The light indicator illuminate and when the soleplate is at good temperature switch off.
Pressing the steam switch, steam function is activated.
Set the temperature indicator at least on position “•••”.
Wait 5 seconds between steam spray and the one other after.
If steam switch is pressed before reaching the setting temperature, steam function won't work but only water drops; that could stain clothes.
Water drops may result of a non-stop pressure of steam switch, by more than 5 seconds.
To obtain a non-stop steam, keep steam indicator in position
ATTENTION : always direct the steam to clothes and not in direction of face.
When finished using the iron, unplug the appliance and empty the tank water.
WATER SPRAY
Check that the tank is full of water, direct the spray forward the clothes. Press several times the water switch.
When used for the first time, it is recommended to press several times on water switch before you obtain the desired spray.
Attention: do not use water spray function on silk.
DRY IRONING
Set the steam indicator on in order to not to use steam function. Set the soleplate temperature by using the thermostat.
The light indicator illuminates and switch off when the soleplate is at good temperature.
Start ironing after iron reached desired temperature.
Please note that the soleplate reached lower temperatures when used without steam.
FILL AND EMPTY THE TANK
This has to be made only when the appliance is unplugged.
Always dry the iron or hands before unplug the appliance after filling the tank.
Make sure the temperature indicator is on "min" and steam indicator is on
Raise the tank lid and slowly fill using a funnel
Do not exceed the maximum limit of the tank.
Do not introduce water into the iron, because of electric shock risks. Close the tank lid when is full and plug the appliance to the socket.
It is possible to use tap water as well as demineralised water if tap water is to hard.
After ironing, unplug the appliance from the socket and empty the tank.
To empty the tank turn over the iron above the sink (or other).
Otherwise place the iron in vertical position and plug it to the socket.
Select the temperature indicator on "MAX" and steam indicator on steam symbol steam come out from the iron by pressing steam switch.
CLEANING
Unplug the appliance from the socket.
To remove dirt on the soleplate, use a wet cloth or with a little quantity of non abrasive detergent when the soleplate is still hot. For hard dirt, use special detergent. Always dry the soleplate after cleaning. Clean the whole iron with a wet cloth without detergent. Do not use metallic sponge or abrasive detergent.
AUTO-CLEANING
Set the MAX. temperature with the temperature selector control.
By pressing auto-cleaning button, release the steam several times steam in order to eliminate the internal residues
Keep the auto-cleaning button pressed for few seconds until the light indicator illuminates. Repeat 3 or 4 times.
STORAGE
Always empty the tank after every use.
Unplug the appliance from the socket and let it cool.
ADVICE FOR SAVING ENERGY
The most important part of energy is consumed when used steam. In order to reduce it, read as follows :
• always start ironing with fabric which need the lower temperature.
- set steam function and temperature as described in the instruction manual.
Iron only when it is necessary. If possible use spray function instead of steam function.
- iron clothes when they are still wet and reduce the steam function. If you use a dryer machine, select « ironing » program that allow you to easily iron clothes.
- if clothes are enough wet, set the steam indicator on "zero".
- when having a break, store the iron in vertical position.
TECHNICAL DATA
Power: 2400W
Power supply: 220-240V \~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
QUESTIONS
| Problems Causes Solution | ||
| The iron does not work 1. the temperature indicator is too low2. problems with power supply | 1. select higher temperature position2. check the power supply by plugging another appliance to the socket | |
| The light indicator does not light | 1. the iron is cooling2. the iron does not heat | 1. wait until cooling is over2. see paragraph above |
| The fabric stick bewteen each other | 1. the temperature is to high 1. select lower temperature position and let the iron getting cooler | |
| Water drops when using steam | 1. the temperature indicator is too low2. the steam indicator is too high but temperature is low | 1. select the temperature indicator on higher position and wait until the light switch off2. select the steam indicator on lower position |
| There is no steam 1. the steam indicator is closed2. the tank is empty3. the temperature is too low.The anti-drip system is on. | 1. turn on the steam indicator2. fill the tank3. set the higher temperature if possible | |
| Spray function does not work 1. the tank is empty2. the mechanism is blocked | 1. fill the tank2. contact technical assistance centre | |
| Water drops get out from soleplate | 1. the steam indicator is not correctly closed | 1. check that the steam indicator is on |
| When first used, smoke appears | 1. some internal pieces have been oiled | 1. smoke will disappear in short period |
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol 🏠 on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
Guarantee conditions
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- Repairs are professionally carried out by qualified persons who are appointed by the supplier.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements...) is excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
Technical assistance
Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:
CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR AFTER SALES DEPARTMENT
BEPER. E-MAIL assistenza@beper.com
WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.
PRECAUTIONS GENERALES
LIRE ATTENTIVEMENT LES INSTRUCTIONS SUIVANTES AVANT LA PREMIERE UTILISATION DE L'APPAREIL.
Assistance technique
- USE ADVICE
- DESCRIPTION
- HOW TO USE IT
- IRONING
- TEMPERATURE SETTING
- N.B. PAY ATTENTION TO THE SYMBOL
- THAT MEANS THAT THE FABRIC MUST NOT BE IRONED
- STEAM IRONING
- WATER SPRAY
- DRY IRONING
- FILL AND EMPTY THE TANK
- CLEANING
- AUTO-CLEANING
- STORAGE
- TECHNICAL DATA
- DISPOSAL OF OLD ELECTRICAL APPLIANCES
- GUARANTEE CONDITIONS
- TECHNICAL ASSISTANCE
- PRECAUTIONS GENERALES
- ASSISTANCE TECHNIQUE
Brand : Beper
Model : 50.945
Category : Iron