HD 717 M Plus - Pressure washer Kärcher - Free user manual and instructions

USER MANUAL HD 717 M Plus Kärcher

Line drawings of three different industrial water purifiers with control panels and wheels (no text or symbols)

Deutsch 7

English 16

Français 26

Italiano 36

Nederlands 45

Español 55

Português 65

Dansk 74

Norsk 84

Svenska 93

Suomi 102

Ελληνικά 111

Türkçe 121

Русский 130

Magyar 141

Čeština 150

Slovenščina 160

Polski 169

Românește 179

Slovenčina 189

Hrvatski 198

Srpski 208

Български 217

Eesti 228

Latviešu 237

Lietuviškai 246

Українська 256

中文 266

العربيه 275

Technical diagram of a water purifier with numbered parts for identification and assembly reference.

Technical diagram of a water purifier with numbered parts for identification and assembly reference.

A 1. 2. 1. 2.

Technical diagram of a spray gun with numbered components and an inset close-up view

D 1. 2. 1. 1.

B ① ② ③ ④

E 5. 6. 3. 4. 7. 8.

HD 6/15 M St, HD 8/18-4 M St

Gemessen: 90

Garantiert: 92

HD 6/16-4 M, HD 8/18-4 MX

Gemessen: 87

Garantiert: 89

HD 6/16-4 MX, HD 7/16-4 MX

Gemessen: 86

Garantiert: 88

HD 7/17 M, HD 7/17 M St

Gemessen: 92

Garantiert: 95

HD 7/17 MX

Gemessen: 91

Garantiert: 94

HD 7/14-4 M

Gemessen: 81

Garantiert: 84

HD 7/14-4 MX

Gemessen: 82

Garantiert: 85

HD 7/16-4 M

Gemessen: 83

Garantiert: 86

HD 8/18-4 M

Gemessen: 88

Garantiert: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/08/01

Contents

General notes.... 16

Intended use.... 16

Environmental protection.... 16

Safety instructions 17

Control elements 17

Colour coding 17

Unpacking 17

Installing accessories 17

Initial startup 18

Operation 18

Interrupting operation 19

Finishing operation.... 19

Only with HD...M, HD...MX: Storing the device... 19

Frost protection 19

Transport.... 19

Storage.... 20

Care and service.... 20

Troubleshooting guide.... 20

Accessories and spare parts.... 20

Warranty.... 21

Technical data 21

Declaration of Conformity.... 25

General notes

Read these original operating instructions and the enclosed safety instructions before using the device for the first

time. Proceed accordingly.

Keep both books for future reference or for future owners.

Intended use

Use this high-pressure cleaner only for the following types of work:

Use the high-pressure jet for cleaning machines, vehicles, buildings, tools and similar objects.

We recommend using a rotary nozzle as a special accessory for stubborn soiling.

The HD...Plus is supplied with a rotary nozzle.

ATTENTION

Dirty water leads to premature wear or deposits in the device.

Clean the device using only clean water, or recycled water that does not exceed the following limits:

• pH value: 6.5...9.5

- Electrical conductivity: Conductivity of fresh water + 1200 μS/cm, maximum conductivity 2000 μS/cm

- Settleable particles (sample volume 1 l, settling time 30 minutes): < 0.5 mg/l

- Filterable particles: < 50 mg/l, no abrasive substances

• Hydrocarbons: < 20 mg/l

• Chloride: < 300 mg/l

• Sulphate: < 240 mg/l

• Calcium: < 200 mg/l

- Total hardness: < 28 °dH, < 50° TH, < 500 ppm (mg CaCO₃/l)

- Iron: < 0.5 mg/l

• Manganese: < 0.05 mg/l

• Copper: < 2 mg/l

• Active chloride: < 0.3 mg/l

• Free of unpleasant odours

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can

pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked

by this symbol are not allowed to be disposed of together with the household rubbish.

Notes on the content materials (REACH)

Current information on content materials can be found at: www.kaercher.com/REACH

Safety instructions

• It is essential that you read the safety instructions 5.951-949.0 before initial startup.
• Observe the national regulations for liquid jet cleaners.
• Observe the national accident prevention regulations. Liquid jet cleaners must be tested regularly. The test result must be recorded in writing.
• Do not modify the device or accessories.

Symbols on the device

The device may not be connected to the public drinking water network.

The high-pressure jet must not be directed at persons, animals, live electrical equipment or at the device itself. Protect the device from frost.

Safety devices

Safety devices protect the user and may not be disabled or functionally circumvented.

The overflow valve, pressure switch an safety valve are set and sealed by the manufacturer. Adjustments are performed only by customer service.

Overflow valve with pressure switch

When the water quantity is reduced via the pressure/quantity control on the trigger gun, the overflow valve opens and part of the water flows back to the suction side of the pump.

When the trigger on the high-pressure gun is release, the pressure switch switches off the high-pressure pump and the high-pressure jet stops.

The pump switches on again when the trigger is pulled.

Safety valve

The safety valve opens when the permissible operating pressure is exceeded and the water flows back to the suction side of the pump.

Control elements

See graphics page

① Protector
② Nozzle
③ Pressure and quantity regulation*
④ EASY!Lock spray lance
⑤EASY!Force high-pressure gun
⑥ Safety latch
⑦Trigger
⑧ Unlocking lever
⑨ EASY!Lock high-pressure hose
⑩ Push handle, top (pulled out)
⑪ Hose reel
⑫ Push handle, bottom (pushed in)

⑬Rubber band
⑭ Cable clips, also a hose holder with the HD...M
⑮ Spray lance holder
⑯ Nozzle storage for rotary nozzle*
⑰Power switch
⑱ Spray lance holder
⑲EASY!Lock high-pressure connection
20 Sieve
21 Hose spout
22 Union nut
23 Water connection
24 Skid, stand
25 Holder for foam nozzle*
②6 Transport retainer for surface cleaner*
27 Push handle lock
28 Crank

* not in the scope of delivery for all device variants

Colour coding

• Control elements for the cleaning process are yellow.
• Control elements for maintenance and servicing are light grey.

Unpacking

1. Check the package content when unpacking.
2. Notify the dealer immediately in the case of shipping damage.
3. Only with HD...M St: Store the drilling template on the packaging for mounting the device on the wall.

Installing accessories

Note

No accessories are supplied in the scope of delivery for the HD...M St.

Note

The EASY!Lock system connects components quickly and safely via a single turn of the quick-release thread.

Figure A

1. Plug the high-pressure nozzle onto the spray lance.
2. Fit the union nut and hand-tighten (EASY!Lock).
3. Connect the spray lance to the high-pressure gun and hand-tighten (EASY!Lock).

For devices without a hose reel:

1. Connect the high-pressure hose to the high-pressure gun and high-pressure connection of the device and tighten hand-tight (EASY!Lock).

For devices with a hose reel:

1. Lay the high-pressure hose on the ground in a straight line.
2. Turn the crank clockwise and wind the high-pressure hose onto the hose reel in evenly distributed layers. Take care to ensure that the hose does not become kinked.
3. Connect the high-pressure hose to the high-pressure gun and hand-tighten (EASY!Lock).

Initial startup

Installation of HD...M St

DANGER

Danger of injury from electric shock

Only allow authorised technical specialists to install the water supply, electrical connections and high-pressure network.

Ambient conditions

• Dry, frost-free environment.
• No danger of explosion.
- Solid, level floor or wall of sufficient loading capacity.
- Do not install in the vicinity of residential spaces or offices (noise emission).
- Accessibility for maintenance work.
• Water drain at installation location.

Fastening the device

Note

Screws and dowels for fastening the holder are not provided in the scope of delivery. The must be selected to suit the requirements of the installation location and must be procured separately. Required screw diameter of 6...8 mm.

△DANGER

Risk of injury from a falling device

Take the weight of the device and the loading capacity of the installation location into account when selecting the fasteners.

Figure B

① Wall mounting
② Floor installation
③ Mounting opening
④ Holder

1. Mark the mounting holes on the wall or floor using the drilling template.
2. Drill the holes.
3. Attach the holder but only tighten the screws lightly.
4. Adjust the holder clearance by turning with an open-end wrench.
5. Tighten the fastening screws.
6. Mount the device.

Electrical connection

⚠️DANGER

Risk of injury from electric shock

Use a plug to connect the device to the mains grid. Permanent connection to the mains grid is prohibited. The plug is used for disconnection from the mains.

HD...M St: The power supply used for operating the device must be able to supply enough power for continuous operation.

HD...M St: All live parts, cables and devices in the work area must be protected against water jets.

1. Plug the mains plug into the socket.

Water connection

Connection to a water line

⚠ WARNING

Health risk from return flow of contaminated water into the drinking water network.

Observe the regulations of your water supply company. According to applicable regulations, the device must never be used with the drinking water network without a system separator. Use a system separator from

KÄRCHER or a system separator as per EN 12729

Type BA. Water that has flowed through a system separator is classified as undrinkable. Always connect the system separator to the water supply and never directly to the water connection on the device.

1. Check the feed pressure, input temperature and input amount of the water supply. See the "Technical data" section for the requirements.
2. Connect the system separator and water connection of the device with a hose (minimum length 7.5 m, minimum diameter 1").

The supply hose is not included in the scope of delivery.

1. Open the water inlet.

Suck water from the container

1. Screw the suction hose (order number 4.440-207.0) and filter (order number 4.730-012.0) onto the water connection.
2. Vent the device.

Vent the device

1. Unscrew the nozzle from the spray lance.
2. Allow the device to run until the escaping water is free of air bubbles.
3. In the case of venting problems, allow the device to run for 10 seconds and then switch it off. Repeat the procedure several times.
4. Switch off the device.
5. Screw the nozzle back in place.

Only HD...M St: High-pressure installation

The applicable national regulations for permanently installed high-pressure cleaning systems must be observed.

1. Connect the device to the permanently installed piping using a high-pressure hose line.
2. Route the permanently installed piping with as few changes in direction as possible.
3. Route the piping using padded loose and fixed clips to compensate for pressure and thermal expansion.
4. Minimum line cross-sections:

a Pipelines: Nominal width DN 15 (1/2").

b Hose lines: Nominal width DN 6.

Operation

△DANGER

Risk of injury from the high-pressure water jet

Never fasten the trigger and safety lever in the actuated position.

Do not use the high-pressure gun when the safety lever is damaged.

Push the safety latch of the high-pressure gun forwards every time before starting work with the device.

Opening/closing the high-pressure gun

1. Opening the high-pressure gun: Actuate the safety lever and trigger.
2. Closing the high-pressure gun: Release the safety lever and trigger.

High-pressure operation

The device can be operated in a standing or lying position.

Note

The device is equipped with a pressure switch. The motor only starts up when the high-pressure gun is open.

1. Device with a hose reel: Completely unroll the high-pressure hose from the hose reel.

2. Set the power switch to "I".

3. Unlock the high-pressure gun by pushing the safety latch of the high-pressure gun to the rear.
4. Open the high-pressure gun.
5. For devices with pressure and volume regulator: Set the working pressure by turning the pressure and volume regulator.

Operation with detergent

Note

A cup foam lance (optional) is needed for operating with detergent.

⚠ WARNING

Health risk through incorrect handling of detergents

Observe the safety instructions on the detergent.

ATTENTION

Unsuitable detergents can damage the device and the object to be cleaned.

Use only detergents approved by KÄRCHER.

Observe the dosing recommendations and notes provided with the detergent.

Use detergents sparingly to help conserve the environment.

KÄRCHER detergents ensure fault-free operation. Ask us for a consultation, request our catalogue or our detergent information sheets.

Figure C

① Foam nozzle
② Container
③ Gate

Detergent mixing: 3=high, 2=medium, 1=low

④ Suction hose
⑤ EASY!Force high-pressure gun

1. Unscrew the container.
2. Plug the desired gate into the suction hose.
3. Fill the detergent into the container.
4. Screw the container onto the foam nozzle.
5. Remove the spray lance from the high-pressure gun.
6. Connect the foam nozzle to the high-pressure gun and hand-tighten.
7. Start up the high-pressure cleaner.

Recommended cleaning method

1. Spray the detergent sparingly on the dry surface and let it work for a while (do not let it dry).
2. Rinse off the loosened dirt with the high-pressure jet.

Rinsing out the foam lance

The foam lance must be flushed after use to prevent the formation of detergent deposits.

1. Unscrew the container.
2. Pour the remaining detergent back into the original packaging.
3. Fill the container with clear water.
4. Screw the container onto the foam nozzle.
5. Operate the foam nozzle for approx. 1 minute to flush the detergent residue.
6. Empty the container.

Interrupting operation

1. Close the high-pressure gun, the device will switch off.
2. Lock the high-pressure gun by pushing the safety latch of the high-pressure gun to the front.

Note

The water pressure in the high-pressure hose is reduced by approx. 70% when the device is switched off. This reduces the actuating force of the high-pressure gun and extends the service life of the device.

Continuing operation

1. Unlock the high-pressure gun by pushing the safety latch to the rear.
2. Open the high-pressure gun, the device will switch on again.

Finishing operation

1. Close off the water inlet.
2. Open the high-pressure gun.
3. Set the power switch to "I" and allow the device to run for 5 to 10 seconds.
4. Close the high-pressure gun.
5. Turn the power switch to "0/OFF".
6. Pull the mains plug out of the socket only when your hands are dry.
7. Disconnect the water inlet.
8. Open the high-pressure gun until the device is completely depressurised.
9. Lock the high-pressure gun by pushing the safety latch of the high-pressure gun to the front.

Only with HD...M, HD...MX: Storing the device

1. Fit the spray lance with high-pressure gun into the spray lance holster and latch into position in the spray lance holder.
2. Wind the mains cable onto the cable clips.
3. HD...M: Wind on the high-pressure hose, hang it over the hose storage compartment and secure with the rubber band. HD...MX: Wind the high-pressure hose onto the hose reel and fold over the crank handle.
4. Press the push handle lock and slide in the push handle.

Frost protection

ATTENTION

Frost destroys the device if it is not completely drained of water.

Store the device in a frost-free location.

If frost-free storage is not possible:

1. Drain the water.
2. Pump commonly available anti-freeze through the device.
3. Allow the device for run for a maximum of 1 minute until the pump and lines are empty.

Note

Use commonly available, Glycol-based vehicle anti-freeze. Observe the handling instructions of the anti-freeze manufacturer.

Transport

△CAUTION

Risk of injury, risk of damage

Be aware of the weight of the device during transport.

ATTENTION

Risk of damage

Protect the trigger of the high-pressure gun from damage.

1. When transporting in vehicles, secure the device against slipping and tipping over according to the applicable guidelines.
2. Pull the device behind you via the push handle for transporting over longer distances (not with HD...M St).
3. Pull the device step by step when ascending stairs. The skids protect the casing from damage (not with HD...M St).

Only with HD...M, HD...MX: Transport retainer for surface cleaner

1. Plug the connection nozzle of the surface cleaned onto the transport bracket on the high-pressure cleaner.

2. Screw on the union nut by approximately 1 turn.

Storage

△CAUTION

Risk of injury, risk of damage.

Be aware of the weight of the device during storage.

1. Store the device indoors only.

Care and service

⚠️DANGER

Risk of injury due to inadvertently starting up device and also due to electric shock.

Switch off the device immediately and unplug the mains plug before performing work.

Safety inspection/maintenance contract

You can agree on regular safety inspections or close a maintenance contract with your dealer. Please seek advice on this.

Each time before use

1. Check the power cable for damage and have a damaged cable replaced immediately by the authorised Customer Service or a qualified electrician.
2. Check the high-pressure hose for damage and replace a damaged high-pressure hose immediately.
3. Check the device for leaks. 3 drops of water per minute are permissible. Contact Customer Service in the case of more serious leaks.

Weekly

1. Clean the sieve in the water connection.

Clean the sieve in the water connection

1. Unscrew the union nut.
2. Pull out the hose union with sieve.
3. Externally clean and rinse the sieve.
   Note: Align the hex-head of the hose union for connection to the device.
4. Fit the hose union with sieve.
5. Tighten the union nut.

Every 500 operating hours, at least annually

1. Have the device maintained by Customer Service.

2. Changing oil.

Changing oil

Note

See the "Technical data" section for the oil volume and type

1. Unscrew the 4 screws.

2. Remove the cover.

Figure D

1. Pivot the oil drain hose downwards over an oil catch pan.
2. Pull the plug out of the oil drain hose.
3. Remove the cap.
4. Remove the foam from the oil tank.
5. Wait until the oil has drained completely.

Figure E

1. Insert the plug into the oil drain hose.

2. Pivot the oil drain hose upwards and latch in place.

3. Fill with the measured correct quantity of oil.

4. Insert the foam into the oil tank.

5. Fit the cap and press firmly in place.

Figure F

Troubleshooting guide

⚠️DANGER

Risk of injury due to inadvertently starting up device and also due to electric shock.

Switch off the device immediately and unplug the mains plug before performing work.

Have electrical components checked and repaired by the authorised Customer Service.

In case of any malfunctions not mentioned in this chapter, contact the authorised Customer Service when in doubt or when you have been explicitly advised to do so.

Device does not start

• Check the power cable for damage.
• Check the mains voltage.
• If the device overheats:
  a Set the power switch to "0".
  b Allow the device to cool for at least 15 minutes.
  c Set the power switch to "1".
• Contact Customer Service in the case of electrical faults.

Device does not reach required pressure

• Check the size of the nozzle and compare with the required size specified in the "Technical data" section.
• Vent the device, see section "Venting the device".
• Clean the sieve in the water connection.
• Check the water supply volume and compare with the required volume specified in the "Technical data" section.
• Clean the nozzle.
• Contact Customer Service if necessary.

Pump leaking

Up to 3 drops of water per minute are permissible.

- In case of more serious leaks, have the device checked by Customer Service.

Pump knocking

• Check the water supply line for leaks.
• Vent the device, see section "Venting the device".
• Contact Customer Service if necessary.

Detergent dosing volume too low

● Refill the foam nozzle cup.
● Plug a larger blender onto the suction hose.
- Check the suction hose and foam nozzle for detergent deposits. Remove deposits using lukewarm water.

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.

Information on accessories and spare parts can be found at www.kaercher.com.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufac-

turing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)

Technical data

				HD 6/11-4 M	HD 6/11-4 M St	HD 6/15 M	HD 6/15 MX	HD 6/15 M St	HD 6/15 M	HD 6/15 MX
Country variant
Country GB EU EU EU CH CH
Electrical connection
Mains voltage V 110 110 230 230 230 230 230
P h a s e				~		1	1	1	1	1
Frequency			Hz	50	50	50	50	50	50	50
Power rating			kW	3,0 3,0 3,1 3,1 3,1 2,3 2,3
Degree of protection				IPX5	IPX5	IPX5	IPX5	IPX5	IPX5	IPX5
Power protection (slow-blowing)			A	30	30	16	16	16	10	10
Extension cable, 30 m			mm^2	2,5 / 6 *	2,5 / 6 *	2,5 2,5	2,5 2,5 2,5
Water connection
Feed pressure (max.)			MPa	1	1	1	1	1	1	1
Input temperature (max.)			°C	60	60	60	60	60	60	60
Input amount (min.)			l/min	13	13	13	13	13	13	13
Suction height (max.)			m	0,5 0,5 0,5 0,5 0,5 0,5 0,5
Device performance data
Nozzle size of standard nozzle				040 040 033 033 033 038 038
Operating pressure			MPa	11	11	15	15	15	12	12
Operating pressure (max.)			MPa	16,5	16,5	22,5	22,5	22,5	18	18
Water flow rate			l/min	10	10	9,3	9,3	9,3	9,6	9,6
High-pressure gun recoil force			N	29,5	29,5	28,6	28,6	28,6	28,6	28,6
Dimensions and weights
Typical operating weight			kg	39	25	30	33	25	30	33
Length			mm 455 290 455 455 290 455 455
Width			mm 400 300 400 400 300 400 400
Height			mm 700 (970)	565 700 (970)		890 (970)	565 700 (970)		890 (970)
Oil volume			I	0,35	0,35	0,25	0,25	0,25	0,25	0,25
Oil type			Type	0W40	0W40	15W40	15W40	15W40	0W40	0W40
Determined values in acc. with EN 60335-2-79
Hand-arm vibration value			m/s^2	2,8 2,8 2,4 2,8 2,4 2,4 2,8
Uncertainty K			m/s^2	0,9 0,9 0,7 0,8 0,7 0,7 0,8
Sound pressure level			dB(A)	75	75	74	74	76	74	74
Uncertainty K_pA			dB	( A ) 3			3	3	3	3
Sound power level L_WA + K uncertainty_WA			dB(A)	91	91	90	90	92	90	90
				HD 6/15 St	HD 6/15 M	HD 6/15 M	HD 6/15 M	HD 6/15-4 M	HD 6/16-4 M	HD 6/16-4 M
Country variant
Country CH KAP KAP AU AR EU EU
Electrical connection
Mains voltage V 230 220 220-240 240 220 230 230

					HD 6/15 St	HD 6/15 M	HD 6/15 M	HD 6/15 M	HD 6/15-4 M	HD 6/16-4 M	HD 6/16-4 M
P	h	a	s	e	~			1	1	1	1
Frequency Hz 50 60 50 50 50 50 50
Power rating kW 2,3 3,2 3,1 3,1 3,3 3,3 3,3
Degree of protection IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5
P	o	w	e	r	p	r	o	t	e	c	t
Extension cable, 30 m				mm^2	2,5 2,5 2,5 2,5 2,5 2,5 2,5
Water connection
Feed pressure (max.)				MPa	1	1	1	1	1	1	1
I	n	p	u	t	t	e	m	p	e	r	a
Input amount (min.)				l/min	13	13,3	13	13	13,3	13	13
Suction height (max.)				m	0,5 0,5 0,5 0,5 0,5 0,5 0,5
Device performance data
Nozzle size of standard nozzle					038	033	033	033	035	034	034
O	p	e	r	a	t	i	n	g	p	r	e
Operating pressure (max.)				MPa	18	22	22,5	22,5	22,5	24	24
Water flow rate				l/min	9,6	9,1	9,3	9,3	9,9	9,9	9,9
High-pressure gun recoil force				N	28,6	28,6	28,6	28,6	30	30	30
Dimensions and weights
Typical operating weight				kg	25 30 30 30 35 39 42
Length				mm	290	455	455	455	455	455	455
Width				mm	300	400	400	400	400	400	400
Height				mm	565	700(970)	700(970)	700(970)	700(970)	700(970)	890(970)
Oil volume				l	0,25	0,25	0,25	0,25	0,35	0,35	0,35
Oil type				Type	0W40	0W40	15W40	15W40	0W40	0W40	0W40
Determined values in acc. with EN 60335-2-79
Hand-arm vibration value				m/s^2	2,4 2,4 2,4 2,4 2,8 2,8 2,8
Uncertainty K				m/s^2	0,7 0,7 0,7 0,7 0,9 0,9 0,9
Sound pressure level				dB(A)	76 74 74 74 74 74 72
Uncertainty K_pA				dB	( A ) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8
Sound power level L_WA + K uncertainty _WA				d	B ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A ) ( A )	9	2	9	0	9	9

		HD 7/12-4M	HD 7/12-4M St	HD 7/13-4M	HD 7/14-4M	HD 7/14-4M	HD 7/14-4MX
Country variant
Country		GB	GB	KAP	AU	EU	EU
Electrical connection
Mains voltage	V	230-240	230-240	220	240	230	230
Phase	~	1	1	1	1	1	1
Frequency	Hz	50	50	60	50	50	50
Power rating	kW	3,1	3,1	3,2	3,4	3,4	3,4
Degree of protection		IPX5	IPX5	IPX5	IPX5	IPX5	IPX5
Power protection (slow-blowing)	A	13	13	20	15	16	16
Extension cable, 30 m	mm^2	2,5	2,5	4	2,5	2,5	2,5
Water connection
Feed pressure (max.)	MPa	1	1	1	1	1	1
Input temperature (max.)	°C	60	60	60	60	60	60
Input amount (min.)	l/min	13	13	13,3	13	15	15
Suction height (max.) m 0,5 0,5 0,5 0,5 0,5 0,5
Device performance data
Nozzle size of standard nozzle 045 045 045 043 043 043
Operating pressure MPa 12 12 13 14 14 14
Operating pressure (max.) MPa 18 18 20 21 21 21
Water flow rate l/min 11,7 11,7 11,8 11,6 11,5 11,5
High-pressure gun recoil force	N	29,5	29,5	31	32,3	32,3	32,3
Dimensions and weights
Typical operating weight	kg 39 31 39 39 39 42
Length	mm 455 290 455 455 455 455
Width	mm 400 300 400 400 400 400
Height	mm	700 (970)	565	700 (970)	700 (970)	700 (970)	890 (970)
Oil volume	l	0,35	0,35	0,25	0,35	0,35	0,35
Oil type	Type	0W40	0W40	0W40	0W40	0W40	0W40
Determined values in acc. with EN 60335-2-79
Hand-arm vibration value	m/s2	2,8 2,8 3,5 2,7 2,7 2,7
Uncertainty K	m/s2	0,9 0,9 0,8 0,8 0,8 0,8
Sound pressure level	dB(A)	72 72 79 69 68 69
Uncertainty KpA	dB(A)	3	3	3	3	3	3
Sound power level LWA + K uncertaintyWA	dB(A)	88	88	95	85	84	85
		HD 7/16-4M	HD 7/16-4MX	HD 7/17 M	HD 7/17MX	HD 7/17 MSt	HD 7/17 M
Country variant
Country		EU EU EU EU EU EU II
Electrical connection
Mains voltage	V	400 400 400 400 400 230
Phase	~	3	3	3	3	3	3
Frequency	Hz 50 50 50 50 50 50
Power rating	kW	4,2 4,2 4,2 4,2 4,2 4,2
Degree of protection		IPX5	IPX5	IPX5	IPX5	IPX5	IPX5
Power protection (slow-blowing)	A	16 16 16 16 16 16
Extension cable, 30 m	mm2	2,5 2,5 2,5 2,5 2,5 2,5
Water connection
Feed pressure (max.)	MPa 1 1 1 1 1	1
Input temperature (max.)	°C	60	60	60	60	60	60
Input amount (min.)	l/min 15 15 15 15 15 13,3
Suction height (max.) m 0,5 0,5 0,5 0,5 0,5 0,5
Device performance data
Nozzle size of standard nozzle 042 042 040 040 040 040
Operating pressure MPa 16 16 17 17 17 17
Operating pressure (max.)	MPa	24	24	25,5	25,5	25,5	25,5
Water flow rate l/min 11,6 11,6 11,6 11,6 11,6
High-pressure gun recoil force	N	34,5	34,5	35,5	35,5	35,5	36
Dimensions and weights
Typical operating weight	kg 40 43 32 35 27 32
Length	mm 455 455 455 455 290 455
		HD 7/16-4M	HD 7/16-4MX	HD 7/17 M	HD 7/17MX	HD 7/17 MSt	HD 7/17 M
Width mm 400 400 400 300 400
Height mm 700 (970) 890 (970) 700 (970) 890 (970) 565 700 (970)
Oil volume I 0,35 0,35 0,2 0,2 0,2 0,25
Oil type Type SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 9
Determined values in acc. with EN 60335-2-79
Hand-arm vibration value m/s	^2	2,4 2,5 3,0 2,9 3,0 2,8
Uncertainty K m/s	^2	0,7 0,7 0,8 0,8 0,8 0,8
Sound pressure level	dB(A)	70	72	79	78	79	77
Uncertainty K_pA	dB(A)	3	3	3	3	3	3
Sound power level L_WA + K uncertainty_WA	dB(A)	86	88	95	94	95	93
		HD 7/17 M	HD 8/18-4M	HD 8/18-4MX	HD 8/18-4M St	HD 8/18-4M St	HD 8/18-4M
Country variant
Country		KAP	EU	EU	EU	EU II	KAP
Electrical connection
Mains voltage	V	220 400 400 400 230 220
Phase	~	3	3	3	3	3	3
Frequency	Hz	60	50	50	50	50	60
Power rating	kW	4,2 4,6 4,6 4,6 4,6 4,8
Degree of protection		IPX5	IPX5	IPX5	IPX5	IPX5	IPX5
Power protection (slow-blowing)	A	16	16	16	16	16	20
Extension cable, 30 m	mm^2	2,5 2,5 2,5 2,5 2,5 4
Water connection
Feed pressure (max.)	MPa	1	1	1	1	1	1
Input temperature (max.)	°C	60	60	60	60	60	60
Input amount (min.)	l/min	13,3	16	16	16	16	13,3
Suction height (max.)	m	0,5	0,5	0,5	0,5	0,5	0,5
Device performance data
Nozzle size of standard nozzle		038 042 042 042 042 043
Operating pressure	MPa	17	18	18	18	18	18
Operating pressure (max.)	MPa	25,5	27	27	27	27	27
Water flow rate	l/min	11,6	12,5	12,5	12,5	12,5	13,4
High-pressure gun recoil force	N	36	41,8	41,8	41,8	41,8	42
Dimensions and weights
Typical operating weight	kg	32	41	44	36	36	41
Length	mm 455 455 455 290 290 455
Width mm 400 400 400 300 300 400
Height mm 700 (970) 700 (970) 890 (970) 565 565 700 (970)
Oil volume	I	0,25	0,35	0,35	0,35	0,35	0,35
Oil type Type SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 90 SAE 10
Determined values in acc. with EN 60335-2-79
Hand-arm vibration value m/s	^2	2,8 2,3	2,3 2,3 2,3 3,5
Uncertainty K m/s	^2	0,8 0,7	0,7 0,7 0,7 0,8
Sound pressure level	dB(A)	77	75	73	76	76	79
Uncertainty K_pA	dB(A)	3	3	3	3	3	3
Sound power level L_WA + K uncertainty_WA	dB(A)	93	91	89	92	92	95

Exception according to Regulation (EU) 2019/1781 Annex I Section 2 (12): j)

Subject to technical changes without notice.

* Extension cable from mains to transformer/transformer to device

Declaration of Conformity

EU Declaration of Conformity

We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This declaration is invalidated by any changes made to the machine that are not approved by us.

Product: High-pressure cleaner

Type: 1.150-xxx

Type: 1.151-xxx

Type: 1.524-xxx

Currently applicable EU Directives

2000/14/EC

2006/42/EC (+2009/127/EC)

2011/65/EU

2014/30/EU

2009/125/EC

Commission Regulation(s)

(EU) 2009/1781

Harmonised standards used

EN 60335-1

EN 60335-2-79

EN IEC 63000: 2018

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 2015

EN 62233: 2008

EN 61000-3-2: 2014

HD 6/15, HD 6/16, HD 7/16, HD 7/17, HD 8/18

EN 61000-3-3: 2013

HD 7/14

EN 61000-3-11: 2000

Applied conformity evaluation method

2000/14/EG: Annex V

Sound power level dB(A)

HD 6/15 M, HD 6/15 MX

Measured: 87

Guaranteed: 90

HD 6/15 M St, HD 8/18-4 M St

Measured: 90

Guaranteed: 92

HD 6/16-4 M, HD 8/18-4 MX

Measured: 87

Guaranteed: 89

HD 6/16-4 MX, HD 7/16-4 MX

Measured: 86

Guaranteed: 88

HD 7/17 M, HD 7/17 M St

Measured: 92

Guaranteed: 95

HD 7/17 MX

Measured: 91

Guaranteed: 94

HD 7/14-4 M

Measured: 81

Guaranteed: 84

HD 7/14-4 MX

Measured: 82

Guaranteed: 85

HD 7/16-4 M

Measured: 83

Guaranteed: 86

HD 8/18-4 M

Measured: 88

Guaranteed: 91

The signatories act on behalf of and with the authority of the company management.

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

Documentation supervisor:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Ph.: [phone]

Fax: [phone]

Winnenden, 2021/08/01

Declaration of Conformity (UK)

We hereby declare that the product described below complies with the relevant provisions of the following UK Regulations, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the product is modified without our prior approval.

Product: High-pressure cleaner

Type: 1.150-xxx

Type: 1.151-xxx

Type: 1.524-xxx

Currently applicable UK Regulations

S.I. 2001/1701 (as amended)

S.I. 2008/1597 (as amended)

S.I. 2012/3032 (as amended)

S.I. 2016/1091 (as amended)

S.I. 2010/2617 (as amended)

Commission Regulation(s)

(EU) 2009/1781

Designated standards used

EN 60335-1

EN 60335-2-79

EN IEC 63000: 2018

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 2015

EN 62233: 2008

EN 61000-3-2: 2014

HD 6/15, HD 6/16, HD 7/16, HD 7/17, HD 8/18

EN 61000-3-3: 2013

HD 7/14

EN 61000-3-11: 2000

Applied conformity assessment procedure

S.I. 2001/1701 (as amended): Schedule 8

Sound power level dB(A)

HD 6/15 M, HD 6/15 MX

Measured: 87

Guaranteed: 90

HD 6/15 M St, HD 8/18-4 M St

Measured: 90

Guaranteed: 92

HD 6/16-4 M, HD 8/18-4 MX

Measured: 87

Guaranteed: 89

HD 6/16-4 MX, HD 7/16-4 MX

Measured: 86

Guaranteed: 88

HD 7/17 M, HD 7/17 M St

Measured: 92

Guaranteed: 95

HD 7/17 MX

Measured: 91

Guaranteed: 94

HD 7/14-4 M

Measured: 81

Guaranteed: 84

HD 7/14-4 MX

Measured: 82

Guaranteed: 85

HD 7/16-4 M

Measured: 83

Guaranteed: 86

HD 8/18-4 M

Measured: 88

Guaranteed: 91

The undersigned act on behalf and under the power of attorney of the company management.

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

Documentation supervisor:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Ph.: [phone]

Fax: [phone]

Winnenden, 2021/08/01

Contenu

HD 6/15 M St, HD 8/18-4 M St

Misurato: 90

Garantito: 92

HD 6/16-4 M, HD 8/18-4 MX

Misurato: 87

Garantito: 89

HD 6/16-4 MX, HD 7/16-4 MX

Misurato: 86

Garantito: 88

HD 7/17 M, HD 7/17 M St

Misurato: 92

Garantito: 95

HD 7/17 MX

Misurato: 91

Garantito: 94

HD 7/14-4 M

Misurato: 81

Garantito: 84

HD 7/14-4 MX

Misurato: 82

Garantito: 85

HD 7/16-4 M

Misurato: 83

Garantito: 86

HD 8/18-4 M

Misurato: 88

Garantito: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 01/08/2021

Inhoud

HD 6/15 M St, HD 8/18-4 M St

Gemeten: 90

Gegarandeerd: 92

HD 6/16-4 M, HD 8/18-4 MX

Gemeten: 87

Gegarandeerd: 89

HD 6/16-4 MX, HD 7/16-4 MX

Gemeten: 86

Gegarandeerd: 88

HD 7/17 M, HD 7/17 M St

Gemeten: 92

Gegarandeerd: 95

HD 7/17 MX

Gemeten: 91

Gegarandeerd: 94

HD 7/14-4 M

Gemeten: 81

Gegarandeerd: 84

HD 7/14-4 MX

Gemeten: 82

Gegarandeerd: 85

HD 7/16-4 M

Gemeten: 83

Gegarandeerd: 86

HD 8/18-4 M

Gemeten: 88

Gegarandeerd: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/08/01

- Dureza total: < 28 °dH, < 50° TH, < 500 ppm (mg CaCO₃/I)

• Hierro: < 0,5 mg/l

• Manganeso: < 0,05 mg/l

• Cobre: < 2 mg/l

2006/42/CE (+2009/127/CE)

2011/65/UE

2014/30/UE

2009/125/CE

HD 6/15 M St, HD 8/18-4 M St

Medida: 90

Garantizada: 92

HD 6/16-4 M, HD 8/18-4 MX

Medida: 87

Garantizada: 89

HD 6/16-4 MX, HD 7/16-4 MX

Medida: 86

Garantizada: 88

HD 7/17 M, HD 7/17 M St

Medida: 92

Garantizada: 95

HD 7/17 MX

Medida: 91

Garantizada: 94

HD 7/14-4 M

Medida: 81

Garantizada: 84

HD 7/14-4 MX

Medida: 82

Garantizada: 85

HD 7/16-4 M

Medida: 83

Garantizada: 86

HD 8/18-4 M

Medida: 88

Garantizada: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 01/08/2021

Índice

2006/42/CE (+2009/127/CE)

2011/65/UE

2014/30/UE

2009/125/CE

HD 6/15 M St, HD 8/18-4 M St

Medido: 90

Garantido: 92

HD 6/16-4 M, HD 8/18-4 MX

Medido: 87

Garantido: 89

HD 6/16-4 MX, HD 7/16-4 MX

Medido: 86

Garantido: 88

HD 7/17 M, HD 7/17 M St

Medido: 92

Garantido: 95

HD 7/17 MX

Medido: 91

Garantido: 94

HD 7/14-4 M

Medido: 81

Garantido: 84

HD 7/14-4 MX

Medido: 82

Garantido: 85

HD 7/16-4 M

Medido: 83

Garantido: 86

HD 8/18-4 M

Medido: 88

Garantido: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

Winnenden, 01/08/2021

Indhold

Landevariant
Land CH KAP KAP AU AR EU EU

Kun HD...M, HD...MX: Transportholder for flaterenser

2006/42/EF (+2009/127/EF)

2011/65/EU

2014/30/EU

2009/125/EF

2000/14/EF: Vedlegg V

Lydeffektnivå dB(A)

HD 6/15 M, HD 6/15 MX

Målt: 87

Garantert: 90

HD 6/15 M St, HD 8/18-4 M St

Målt: 90

Garantert: 92

HD 6/16-4 M, HD 8/18-4 MX

Målt: 87

Garantert: 89

HD 6/16-4 MX, HD 7/16-4 MX

Målt: 86

Garantert: 88

HD 7/17 M, HD 7/17 M St

Målt: 92

Garantert: 95

HD 7/17 MX

Mält: 91

Garantert: 94

HD 7/14-4 M

Målt: 81

Garantert: 84

HD 7/14-4 MX

Mält: 82

Garantert: 85

HD 7/16-4 M

Målt: 83

Garantert: 86

HD 8/18-4 M

Målt: 88

Garantert: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tlf.: [phone]

Winnenden, 2021/08/01

Innehåll

Allmän information 93

HD 6/15 M St, HD 8/18-4 M St

Uppmätt: 90

Garanterad: 92

HD 6/16-4 M, HD 8/18-4 MX

Uppmätt: 87

Garanterad: 89

HD 6/16-4 MX, HD 7/16-4 MX

Uppmätt: 86

Garanterad: 88

HD 7/17 M, HD 7/17 M St

Uppmätt: 92

Garanterad: 95

HD 7/17 MX

Uppmätt: 91

Garanterad: 94

HD 7/14-4 M

Uppmätt: 81

Garanterad: 84

HD 7/14-4 MX

Uppmätt: 82

Garanterad: 85

HD 7/16-4 M

Uppmätt: 83

Garanterad: 86

HD 8/18-4 M

Uppmätt: 88

Garanterad: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

D-71364 Winnenden (Germany)

Tfn: [phone]

Fax: [phone]

Winnenden, 01.08.2021

Sisältö

Yleisiä ohjeita 102

HD 6/15 M St, HD 8/18-4 M St

Mitattu: 90

Taattu: 92

HD 6/16-4 M, HD 8/18-4 MX

Mitattu: 87

Taattu: 89

HD 6/16-4 MX, HD 7/16-4 MX

Mitattu: 86

Taattu: 88

HD 7/17 M, HD 7/17 M St

Mitattu: 92

Taattu: 95

HD 7/17 MX

Mitattu: 91

Taattu: 94

HD 7/14-4 M

Mitattu: 81

Taattu: 84

HD 7/14-4 MX

Mitattu: 82

Taattu: 85

HD 7/16-4 M

Mitattu: 83

Taattu: 86

HD 8/18-4 M

Mitattu: 88

Taattu: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

HD 6/15 M St, HD 8/18-4 M St

Μετρημένη: 90

Εγγυημένη: 92

HD 6/16-4 M, HD 8/18-4 MX

Μετρημένη: 87

Εγγυημένη: 89

HD 6/16-4 MX, HD 7/16-4 MX

Μετρημένη: 86

Εγγυημένη: 88

HD 7/17 M, HD 7/17 M St

Μετρημένη: 92

Εγγυημένη: 95

HD 7/17 MX

Μετρημένη: 91

Εγγυημένη: 94

HD 7/14-4 M

Μετρημένη: 81

Εγγυημένη: 84

HD 7/14-4 MX

Μετρημένη: 82

Εγγυημένη: 85

HD 7/16-4 M

Μετρημένη: 83

Εγγυημένη: 86

HD 8/18-4 M

Μετρημένη: 88

Εγγυημένη: 91

71364 Winnenden (Germany)

Tηλ.: [phone]

Φαξ: [phone]

Winnenden, 2021/08/01

İçindekiler

2006/42/AT (+2009/127/AT)

2011/65/AB

2014/30/AB

2009/125/EG

HD 6/15 M St, HD 8/18-4 M St

Ölçülen: 90

Garanti edilen: 92

HD 6/16-4 M, HD 8/18-4 MX

Ölçülen: 87

Garanti edilen: 89

HD 6/16-4 MX, HD 7/16-4 MX

Ölçülen: 86

Garanti edilen: 88

HD 7/17 M, HD 7/17 M St

Ölçülen: 92

Garanti edilen: 95

HD 7/17 MX

Ölçülen: 91

Garanti edilen: 94

HD 7/14-4 M

Ölçülen: 81

Garanti edilen: 84

HD 7/14-4 MX

Ölçülen: 82

Garanti edilen: 85

HD 7/16-4 M

Ölçülen: 83

Garanti edilen: 86

HD 8/18-4 M

Ölçülen: 88

Garanti edilen: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

Winnenden, 2021/08/01

Содержание

HD 6/15 M St, HD 8/18-4 M St

Измерено: 90

Гарантировано: 92

HD 6/16-4 M, HD 8/18-4 MX

Измерено: 87

Гарантировано: 89

HD 6/16-4 MX, HD 7/16-4 MX

Измерено: 86

Гарантировано: 88

HD 7/17 M, HD 7/17 M St

Измерено: 92

Гарантировано: 95

HD 7/17 MX

Измерено: 91

Гарантировано: 94

HD 7/14-4 M

Измерено: 81

Гарантировано: 84

HD 7/14-4 MX

Измерено: 82

Гарантировано: 85

HD 7/16-4 M

Измерено: 83

Гарантировано: 86

HD 8/18-4 M

Измерено: 88

Гарантировано: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

HD 6/15 M St, HD 8/18-4 M St

Mért: 90

Szavatolt: 92

HD 6/16-4 M, HD 8/18-4 MX

Mért: 87

Szavatolt: 89

HD 6/16-4 MX, HD 7/16-4 MX

Mért: 86

Szavatolt: 88

HD 7/17 M, HD 7/17 M St

Mért: 92

Szavatolt: 95

HD 7/17 MX

Mért: 91

Szavatolt: 94

HD 7/14-4 M

Mért: 81

Szavatolt: 84

HD 7/14-4 MX

Mért: 82

Szavatolt: 85

HD 7/16-4 M

Mért: 83

Szavatolt: 86

HD 8/18-4 M

Mért: 88

Szavatolt: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

Winnenden, 2021/08/01

Obsah

Obecné pokyny 150

2006/42/ES (+2009/127/ES)

2011/65/EU

2014/30/EU

2009/125/ES

HD 6/15 M St, HD 8/18-4 M St

Naměřeno: 90

Zaručeno: 92

HD 6/16-4 M, HD 8/18-4 MX

Naměřeno: 87

Zaručeno: 89

HD 6/16-4 MX, HD 7/16-4 MX

Naměřeno: 86

Zaručeno: 88

HD 7/17 M, HD 7/17 M St

Naměřeno: 92

Zaručeno: 95

HD 7/17 MX

Naměřeno: 91

Zaručeno: 94

HD 7/14-4 M

Naměřeno: 81

Zaručeno: 84

HD 7/14-4 MX

Naměřeno: 82

Zaručeno: 85

HD 7/16-4 M

Naměřeno: 83

Zaručeno: 86

HD 8/18-4 M

Naměřeno: 88

Zaručeno: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

Winnenden, 2021/08/01

Kazalo

Splošna navodila 160

Namenska uporaba 160

Varovanje okolja 160

Varnostna navodila 160

Upravljalni elementi 160

Barvna oznaka 161

Odstranjevanje embalaže.... 161

Montaža pribora 161

Zagon 161

Upravljanje 162

Prekinitev obratovanja.... 163

Zaključek obratovanja 163

Samo HD...M, HD...MX: Shranjevanje naprave .. 163

2006/42/ES (+2009/127/ES)

2011/65/EU

2014/30/EU

2009/125/ES

Uporabljena(-e) uredba(-e)

(EU) 2009/1781

HD 6/15 M St, HD 8/18-4 M St

Izmerjeno: 90

Zajamčeno: 92

HD 6/16-4 M, HD 8/18-4 MX

Izmerjeno: 87

Zajamčeno: 89

HD 6/16-4 MX, HD 7/16-4 MX

Izmerjeno: 86

Zajamčeno: 88

HD 7/17 M, HD 7/17 M St

Izmerjeno: 92

Zajamčeno: 95

HD 7/17 MX

Izmerjeno: 91

Zajamčeno: 94

HD 7/14-4 M

Izmerjeno: 81

Zajamčeno: 84

HD 7/14-4 MX

Izmerjeno: 82

Zajamčeno: 85

HD 7/16-4 M

Izmerjeno: 83

Zajamčeno: 86

HD 8/18-4 M

Izmerjeno: 88

Zajamčeno: 91

Podpisniki ravnajo po navodilih in s pooblastilom upra-ve.

H. Jenner

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

Winnenden, 1. 8. 2021

Spis treści

2006/42/WE (+2009/127/WE)

2011/65/UE

2014/30/UE

2009/125/WE

HD 6/15 M St, HD 8/18-4 M St

Zmierzony: 90

Gwarantowany: 92

HD 6/16-4 M, HD 8/18-4 MX

Zmierzony: 87

Gwarantowany: 89

HD 6/16-4 MX, HD 7/16-4 MX

Zmierzony: 86

Gwarantowany: 88

HD 7/17 M, HD 7/17 M St

Zmierzony: 92

Gwarantowany: 95

HD 7/17 MX

Zmierzony: 91

Gwarantowany: 94

HD 7/14-4 M

Zmierzony: 81

Gwarantowany: 84

HD 7/14-4 MX

Zmierzony: 82

Gwarantowany: 85

HD 7/16-4 M

Zmierzony: 83

Gwarantowany: 86

HD 8/18-4 M

Zmierzony: 88

Gwarantowany: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Directive UE relevante

2000/14/UE

2006/42/UE (+2009/127/UE)

2011/65/UE

2014/30/UE

2009/125/UE

Regulament(e) utilizat(e)

(UE) 2009/1781

Norme armonizate aplicate

EN 60335-1

EN 60335-2-79

EN IEC 63000: 2018

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 2015

EN 62233: 2008

EN 61000-3-2: 2014

HD 6/15, HD 6/16, HD 7/16, HD 7/17, HD 8/18

EN 61000-3-3: 2013

HD 7/14

EN 61000-3-11: 2000

HD 6/15 M St, HD 8/18-4 M St

Măsurat: 90

Garantat: 92

HD 6/16-4 M, HD 8/18-4 MX

Măsurat: 87

Garantat: 89

HD 6/16-4 MX, HD 7/16-4 MX

Măsurat: 86

Garantat: 88

HD 7/17 M, HD 7/17 M St

Măsurat: 92

Garantat: 95

HD 7/17 MX

Măsurat: 91

Garantat: 94

HD 7/14-4 M

Măsurat: 81

Garantat: 84

HD 7/14-4 MX

Măsurat: 82

Garantat: 85

HD 7/16-4 M

Măsurat: 83

Garantat: 86

HD 8/18-4 M

Măsurat: 88

Garantat: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

71364 Winnenden (Germania)

Tel.: [phone]

Fax: [phone]

Winnenden, 2021/08/01

Obsah

Všeobecné upozornenia.... 189

2006/42/ES (+2009/127/ES)

2011/65/EÚ

2014/30/EÚ

2009/125/ES

HD 6/15 M St, HD 8/18-4 M St

Namerané: 90

Zaručené: 92

HD 6/16-4 M, HD 8/18-4 MX

Namerané: 87

Zaručené: 89

HD 6/16-4 MX, HD 7/16-4 MX

Namerané: 86

Zaručené: 88

HD 7/17 M, HD 7/17 M St

Namerané: 92

Zaručené: 95

HD 7/17 MX

Namerané: 91

Zaručené: 94

HD 7/14-4 M

Namerané: 81

Zaručené: 84

HD 7/14-4 MX

Namerané: 82

Zaručené: 85

HD 7/16-4 M

Namerané: 83

Zaručené: 86

HD 8/18-4 M

Namerané: 88

Zaručené: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Winnenden, 01.08.2021

Sadržaj

Opće napomene.... 198

2006/42/EZ (+2009/127/EZ)

2011/65/EU

2014/30/EU

2009/125/EZ

Primijenjene uredbe

(EU) 2009/1781

HD 6/15 M St, HD 8/18-4 M St

Izmjereno: 90

Zajamčeno: 92

HD 6/16-4 M, HD 8/18-4 MX

Izmjereno: 87

Zajamčeno: 89

HD 6/16-4 MX, HD 7/16-4 MX

Izmjereno: 86

Zajamčeno: 88

HD 7/17 M, HD 7/17 M St

Izmjereno: 92

Zajamčeno: 95

HD 7/17 MX

Izmjereno: 91

Zajamčeno: 94

HD 7/14-4 M

Izmjereno: 81

Zajamčeno: 84

HD 7/14-4 MX

Izmjereno: 82

Zajamčeno: 85

HD 7/16-4 M

Izmjereno: 83

Zajamčeno: 86

HD 8/18-4 M

Izmjereno: 88

Zajamčeno: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

Opunomoćenik za dokumentaciju:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Njemačka)

Tel.: [phone]

Telefaks: [phone]

Winnenden, 01.08.2021.

Sadržaj

Opšte napomene	208
Namenska upotreba	208
Zaštita životne sredine	208
Sigurnosne napomene	208
Komandni elementi	208
Identifikacija boje	209
Raspakivanje	209
Montaža pribora	209
Puštanje u pogon	209
Rukovanje	210
Prekid režima rada	211
Završetak režima rada	211
Samo HD...M, HD...MX: Čuvanje uređaja	211
Zaštita od smrzavanja	211
Transport	211
Skladištenje	211
Nega i održavanje	211
Pomoć kod smetnji	212
Pribor i rezervni delovi	212

Garancija 212

Tehnički podaci 212

2006/42/EZ (+2009/127/EZ)

2011/65/EU

2014/30/EU

2009/125/EZ

Primenjena(e) odredba(e)

(EU) 2009/1781

Primenjene harmonizovane norme

EN 60335-1

EN 60335-2-79

EN IEC 63000: 2018

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 2015

EN 62233: 2008

EN 61000-3-2: 2014

HD 6/15, HD 6/16, HD 7/16, HD 7/17, HD 8/18

EN 61000-3-3: 2013

HD 7/14

EN 61000-3-11: 2000

HD 6/15 M St, HD 8/18-4 M St

Izmereno: 90

Garantovano: 92

HD 6/16-4 M, HD 8/18-4 MX

Izmereno: 87

Garantovano: 89

HD 6/16-4 MX, HD 7/16-4 MX

Izmereno: 86

Garantovano: 88

HD 7/17 M, HD 7/17 M St

Izmereno: 92

Garantovano: 95

HD 7/17 MX

Izmereno: 91

Garantovano: 94

HD 7/14-4 M

Izmereno: 81

Garantovano: 84

HD 7/14-4 MX

Izmereno: 82

Garantovano: 85

HD 7/16-4 M

Izmereno: 83

Garantovano: 86

HD 8/18-4 M

Izmereno: 88

Garantovano: 91

Potpisnici deluju po nalogu i uz punomoć upravnog odbora.

H. Jenner

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

Lice ovlašćeno za dokumentaciju:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Tel.: [phone]

Winnenden, 2021/08/01

Съдържание

Общи указания.... 217

Употреба по предназначение.... 217

HD 6/15 M St, HD 8/18-4 M St

Измерено: 90

Гарантирано: 92

HD 6/16-4 M, HD 8/18-4 MX

Измерено: 87

Гарантирано: 89

HD 6/16-4 MX, HD 7/16-4 MX

Измерено: 86

Гарантирано: 88

HD 7/17 M, HD 7/17 M St

Измерено: 92

Гарантирано: 95

HD 7/17 MX

Измерено: 91

Гарантирано: 94

HD 7/14-4 M

Измерено: 81

Гарантирано: 84

HD 7/14-4 MX

Измерено: 82

Гарантирано: 85

HD 7/16-4 M

Измерено: 83

Гарантирано: 86

HD 8/18-4 M

Измерено: 88

Гарантирано: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

Виненден, 2021/08/01

Sisukord

Üldised juhised 228

www.kaercher.com/REACH

Ohutusjuhised

Tarvikute monteerimine

Märkus

Vee sisseimemine mahutist

Toode: Körgsurvepesur

Tüüp: 1.150-xxx

Tüüp: 1.151-xxx

Tüüp: 1.524-xxx

2006/42/EÜ (+2009/127/EÜ)

2011/65/EL

2014/30/EL

2009/125/EÜ

HD 6/15 M St, HD 8/18-4 M St

Mõõdetud: 90

Garanteeritud: 92

HD 6/16-4 M, HD 8/18-4 MX

Mõõdetud: 87

Garanteeritud: 89

HD 6/16-4 MX, HD 7/16-4 MX

Mõõdetud: 86

Garanteeritud: 88

HD 7/17 M, HD 7/17 M St

Mõõdetud: 92

Garanteeritud: 95

HD 7/17 MX

Mõõdetud: 91

Garanteeritud: 94

HD 7/14-4 M

Mõõdetud: 81

Garanteeritud: 84

HD 7/14-4 MX

Mõõdetud: 82

Garanteeritud: 85

HD 7/16-4 M

Mõõdetud: 83

Garanteeritud: 86

HD 8/18-4 M

Mõõdetud: 88

Garanteeritud: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Tel: [phone]

Winnenden, 2021/08/01

Saturs

HD 6/15 M St, HD 8/18-4 M St

Izmērīts: 90

Nodrošināts: 92

HD 6/16-4 M, HD 8/18-4 MX

Izmērīts: 87

Nodrošināts: 89

HD 6/16-4 MX, HD 7/16-4 MX

Izmērīts: 86

Nodrošināts: 88

HD 7/17 M, HD 7/17 M St

Izmērīts: 92

Nodrošināts: 95

HD 7/17 MX

Izmērīts: 91

Nodrošināts: 94

HD 7/14-4 M

Izmērīts: 81

Nodrošināts: 84

HD 7/14-4 MX

Izmērīts: 82

Nodrošināts: 85

HD 7/16-4 M

Izmērīts: 83

Nodrošināts: 86

HD 8/18-4 M

Izmērīts: 88

Nodrošināts: 91

H. Jenner
Chairman of the Board of Management

S. Reiser
Director Regulatory Affairs & Certification

HD 6/15 M St, HD 8/18-4 M St

Išmatuotas: 90

Garantuojamas: 92

HD 6/16-4 M, HD 8/18-4 MX

Išmatuotas: 87

Garantuojamas: 89

HD 6/16-4 MX, HD 7/16-4 MX

Išmatuotas: 86

Garantuojamas: 88

HD 7/17 M, HD 7/17 M St

Išmatuotas: 92

Garantuojamas: 95

HD 7/17 MX

Išmatuotas: 91

Garantuojamas: 94

HD 7/14-4 M

Išmatuotas: 81

Garantuojamas: 84

HD 7/14-4 MX

Išmatuotas: 82

Garantuojamas: 85

HD 7/16-4 M

Išmatuotas: 83

Garantuojamas: 86

HD 8/18-4 M

Išmatuotas: 88

Garantuojamas: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

HD 6/15 M St, HD 8/18-4 M St

Виміряний: 90

Гарантований: 92

HD 6/16-4 M, HD 8/18-4 MX

Виміряний: 87

Гарантований: 89

HD 6/16-4 MX, HD 7/16-4 MX

Виміряний: 86

Гарантований: 88

HD 7/17 M, HD 7/17 M St

Виміряний: 92

Гарантований: 95

HD 7/17 MX

Виміряний: 91

Гарантований: 94

HD 7/14-4 M

Виміряний: 81

Гарантований: 84

HD 7/14-4 MX

Виміряний: 82

Гарантований: 85

HD 7/16-4 M

Виміряний: 83

Гарантований: 86

HD 8/18-4 M

Виміряний: 88

Гарантований: 91

Chairman of the Board of Management

S. Reiser

Director Regulatory Affairs & Certification

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

www.kaercher.com/REACH

安全提示

لا يضمنDiscounting Mode of the Methylamine (Methylamine) on HD...M

ملحق تكملي.

إرشاد

Black and white icon of a hand giving a thumbs-up gesture (no text or symbols)

THANK YOU!

MERCI! DANKE! iGRACIAS!

Register your product and benefit from many advantages.

www.kaercher.com/welcome

Rate your product and tell us your opinion.

Icon showing a gear and wrench inside a square frame (no text or symbols)

www.kaercher.com/dealersearch

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28-40

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

QR code image with a central logo, likely linking to a digital resource or website.