K 2 Classic - Pressure washer Kärcher - Free user manual and instructions
Find the device manual for free K 2 Classic Kärcher in PDF.
User questions about K 2 Classic Kärcher
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Pressure washer in PDF format for free! Find your manual K 2 Classic - Kärcher and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K 2 Classic by Kärcher.
USER MANUAL K 2 Classic Kärcher
natural_image
Yellow KARCHER water purifier with black hoses and two vertical tubes (no visible text or symbols on body)Deutsch 4
English 7
Français 11
Italiano 15
Español 19
Português 22
Nederlands 26
Türkçe 30
Svenska 33
Suomi 37
Norsk 40
Dansk 44
Eesti 47
Latviešu 51
Lietuviškai 54
Polski 58
Magyar 62
Čeština 65
Slovenčina 69
Slovenščina 72
Românește 76
Hrvatski 79
Srpski 83
Ελληνικά 87
Русский 90
Українська 95
Қазақша 99
Български 103
العربيya
A
text_image
Labeled diagram of a KARCHER water purifier with numbered parts for identification and assembly reference.
text_image
B a b
natural_image
Yellow industrial water purifier with control panel and cable (no visible text or symbols)
text_image
a b c
text_image
D b a d c
text_image
E CLICK a b
text_image
F a b
natural_image
Close-up of a yellow fuel pump plug with a red arrow indicating a downward motion, shown in two views (no text or symbols)
text_image
Diagram illustrating a mechanical assembly process with labeled parts and water droplets, showing tool insertion and component disassembly.Inhalt
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
Contents
| General notes | 7 |
| Environmental protection | 7 |
| Intended use | 8 |
| Accessories and spare parts | 8 |
| Scope of delivery | 8 |
| Device description | 8 |
| Safety devices | 8 |
| Symbols on the device | 8 |
| Mounting | 8 |
| Initial startup | 8 |
| Operation | 9 |
| Transport | 9 |
| Storage | 9 |
| Care and service | 10 |
| Troubleshooting guide | 10 |
| Warranty | 10 |
| Technical data | 10 |
| EU Declaration of Conformity | 10 |
General notes
Read these original operating instructions and the enclosed safety instructions before using the device for the first
time. Proceed accordingly.
Keep both books for future reference or for future owners.
Environmental protection
The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can
pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish.
Cleaning work producing in oily waste water, e.g. washing engines, washing undercarriages etc., may only be performed at washing stations with an oil separator.
Working with detergents may only be performed on watertight surfaces with connection to the waste water sewage system. Do not allow detergent to enter waterways or the soil.
Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.de/REACH
Intended use
Use the high-pressure cleaner in private households only.
The high-pressure cleaner is intended for cleaning machines, vehicles, buildings, tools, façades, terraces, garden machines etc. using a high-pressure water jet.
Accessories and spare parts
Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.
Scope of delivery
The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.
Device description
For the figures, please refer to the graphics page Illustration A
① Water connection coupling
② Water connection with integrated sieve
③ Mains connection cable with mains plug
④ Storage for spray lances
⑤ Storage for high-pressure hose / mains connection cable
⑥ High-pressure hose
⑦ Spray lance with dirt grinder for stubborn soiling
⑧ Spray lance with high-pressure nozzle for normal cleaning tasks
⑨ High-pressure gun
⑩ Clamp for connecting / disconnecting the high-pressure hose
⑪ High-pressure gun lever
⑫ High-pressure gun lock
⑬ Carrying handle
⑭ Trigger "0/OFF" / "I/ON"
15 High-pressure connection
⑯ Type plate
⑰*Garden hose (fabric reinforced, diameter at least 1/2 inch (13 mm), length at least 7.5 m, with commercially available quick coupling)
* additionally required
Safety devices
△CAUTION
Missing or modified safety devices!
Safety devices are provided for your own protection. Do not bypass, remove or render ineffective any safety devices.
Power switch
The power switch prevents unintentional operation of the device.
High-pressure gun lock
The lock locks the lever of the high-pressure gun and prevents the device from starting unintentionally.
Auto-stop function
If the lever of the high-pressure gun is released, the pressure switch turns off the pump and the high-pressure jet stops. The pump switches on again when the lever is pressed.
Symbols on the device
Do not aim the high-pressure jet may at persons, animals, live electrical equipment or the device itself.
Protect the device against frost.
The device may not be connected to the public drinking water network.
Mounting
For the figures, please refer to the graphics page.
Fit the supplied loose parts onto the device before starting up the device.
Installing the water connection coupling
- Screw the water connection coupling onto the water connection on the device.
Illustration B
Initial startup
- Place the device on a flat and level surface.
- Unwind the high-pressure hose and eliminate any loops and twists.
-
Connect the high-pressure hose to the device. a Pull up the clamp on the coupling. b Insert the high-pressure hose into the coupling. c Press down the clamp on the coupling. Illustration C
-
Connect the high-pressure hose to the high-pressure gun.
a Squeeze the clamp.
b Pull out the clamp.
c Insert the high-pressure hose.
d Press the clamp in until it latches into place.
Illustration D
- Check for a secure connection by pulling on the high-pressure hose.
- Plug the mains plug into a mains socket.
Water supply
For the connection values, see the type plate or chapter Technical data.
Observe the water distribution company regulations.
ATTENTION
Damage through contaminated water
Contamination in the water can damage the pump and the accessories.
KÄRCHER recommends using the KÄRCHER water filter for protection(special accessory, order number 4.730-059).
Connection to the water line
ATTENTION
Hose coupling with Aquastop on the water connection of the device
Damage to the pump
Never use a hose coupling with Aquastop on the water connection of the device.
You can use an Aquastop coupling on the tap.
-
Plug the garden hose onto the water connection coupling.
-
Connect the garden hose to the water line.
Illustration E
- Open the water tap fully.
Operation
ATTENTION
Dry running of pump
Damage to the device
If the device does not build up any pressure within 2 minutes, switch off the device and proceed according to the instructions in chapter Troubleshooting guide.
High-pressure operation
ATTENTION
Damage to painted or sensitive surfaces
Surfaces can be damaged when the jet is too close to the surface or an unsuitable spray lance is used.
Maintain a minimum spray distance of 30 cm when cleaning painted surfaces.
Do not clean car tyres, paint or sensitive surfaces such as wood with the dirt blaster.
- Insert a spray lance into the high-pressure gun and lock it by turning it 90°.
Illustration F
-
Switch the device on ("I/ON").
-
Unlock the lever of the high-pressure gun.
-
Press the lever of the high-pressure gun. The device switches on.
Interrupting operation
-
Release the lever of the high-pressure gun. The device switches off when the lever is released. The high pressure in the system is retained.
-
Lock the lever of the high-pressure gun. Illustration G
-
Switch the device off "0/OFF" during work breaks longer than 5 minutes.
Ending operation
△CAUTION
Pressure in the system
Injuries from high-pressure water escaping uncontrollably
Only disconnect the high-pressure hose from the high-pressure gun or the device when the system is fully depressurised.
-
Release the lever of the high-pressure gun.
-
Close the water tap.
-
Press the lever of the high-pressure gun for 30 seconds. The pressure still remaining in the system is released.
- Release the lever of the high-pressure gun.
- Lock the lever of the high-pressure gun.
- Disconnect the device from the water supply.
- Switch off the device "0/OFF".
- Pull the mains plug out of the outlet.
Transport
△CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transportation.
Carrying the device
- Lift up the device by the carrying handle, and carry it.
Transporting the device in a vehicle
- Secure the device against slipping and tipping over.
Storage
△CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
Storing the device
- Place the device on a level surface.
- Disconnect the spray lance from the high-pressure gun.
- Stow both spray lances in the appropriate storage options.
-
Disconnect the high-pressure hose from the high-pressure gun.
-
Disconnect the high-pressure hose from the device.
-
Store the high-pressure hose on the device.
-
Store the high-pressure gun on the device.
-
Stow the mains connection cable on the device.
Observe the additional notes before storing the device for a longer period of time, see chapter Care and service.
Frost protection
ATTENTION
Danger of frost
Incompletely emptied devices can be destroyed by frost.
Completely empty the device and accessories.
Protect the device from frost.
The following requirements must be satisfied:
- The device is disconnected from the water supply.
• The high-pressure hose is removed. - Switch the device on "I/ON".
- Wait for a maximum of 1 minute until no more water escapes from the high-pressure connection.
- Switch off the device.
- Store the device in a frost-protected room, together with all accessories.
Care and service
⚠️DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device is maintenance-free, i.e. you do not need to perform any maintenance work.
Clean the sieve in the water connection
ATTENTION
Damaged sieve in the water connection
Damage to the device through contaminated water Check the sieve for damage before inserting it in the water connection.
If necessary, clean the sieve in the water connection.
-
Remove the coupling from the water connection.
-
Pull out the sieve with a pair of flat pliers.
-
Clean the sieve under running water.
Illustration H
-
Insert the sieve into the water connection.
-
Screw the coupling onto the water connection.
Troubleshooting guide
Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.
⚠️DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Device not running
-
Press the lever of the high-pressure gun. The device switches on.
-
Check that the voltage specified on the type plate corresponds to the voltage of the power source.
-
Check the mains connection cable for damage.
The device does not reach required pressure
The water supply is too low.
-
Open the water tap completely.
-
Check the water inlet for sufficient flow rate.
The sieve in the water connection is dirty.
-
Pull out the sieve in the water connection with flat pliers.
-
Clean the sieve under running water. Illustration H
Air is in the device.
- Vent the device:
a Switch on the device for a maximum of 2 minutes without the spray lance connected.
b Press the high-pressure gun and wait until water comes out of the high-pressure gun without bubbles.
c Connect the spray lance.
Strong pressure fluctuations
- Cleaning the high-pressure nozzle:
a Remove contamination from the nozzle drill with a needle.
b Rinse the high-pressure nozzle with water from the front.
- Check the water supply volume.
Device leaking
- The device leaks a small amount for technical reasons. If the leak is severe, request authorised Customer Service.
Warranty
The warranty conditions issued by our sales company responsible apply in all countries. We shall remedy possible malfunctions on your device within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.
(See overleaf for the address)
Technical data
Electrical connection
| Voltage | V |
| Phase ~ 1 | |
| Frequency Hz 50-60 | |
| Current consumption A 6 | |
| Degree of protection IPX5 | |
| Protection class II | |
| Power protection (slow-blowing) | A 10 |
Water connection
| Feed pressure (max.) | MPa | 1,2 |
| Input temperature (max.) | °C | 40 |
| Input amount (min.) | l/min | 8 |
Device performance data
| Operating pressure | MPa | 7,4 |
| Max. permissible pressure | MPa | 11,0 |
| Water flow rate | l/min | 5,2 |
| Maximum flow rate | l/min | 6,0 |
| High-pressure gun recoil force | N | 11 |
Dimensions and weights
| Typical operating weight | kg | 4,0 |
| Length | mm | 178 |
| Width | mm | 219 |
| Height | mm | 415 |
Determined values in acc. with EN 60335-2-79
| Hand-arm vibration value | m/s2 | <2,5 |
| Uncertainty K | m/s2 | 0,7 |
| Sound pressure level LpA | dB(A) | 78 |
| Uncertainty KpA | dB(A) | 3 |
| Sound power level LWA + uncertainty KWA | dB(A) | 93 |
Subject to technical modifications.
EU Declaration of Conformity
We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This declaration is invalidated by any changes made to the machine that are not approved by us.
Product: High-pressure cleaner
Type: 1.673-xxx
Currently applicable EU Directives
2011/65/EU
2000/14/EC
2006/42/EC (+2009/127/EC)
2014/30/EU
Harmonised standards used
EN 60335-1
EN 60335-2-79
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN IEC 63000: 2018
Applied conformity evaluation method
2000/14/EG: Annex V
Sound power level dB(A)
Measured: 90
Guaranteed: 93
The signatories act on behalf of and with the authority of the company management.
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
Contenu
2006/42/CE (+2009/127/CE)
2014/30/UE
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Winnenden, 2022/12/01
Indice
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
2006/42/CE (+2009/127/CE)
2014/30/UE
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
Índice
2006/42/CE (+2009/127/CE)
2014/30/UE
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Winnenden, 2022/12/01
Inhoud
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
İçindekiler
2006/42/AT (+2009/127/AT)
2014/30/AB
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Winnenden, 2022/12/01
Innehåll
Allmän information 33
Miljöskydd 33
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
D-71364 Winnenden (Germany)
Tfn: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
Sisältö
Yleisiä ohjeita 37
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Puh.: +49 7195 14-0
Winnenden, 2022/12/01
Indhold
Generelle merknader 40
Miljøvern.... 40
2006/42/EF (+2009/127/EF)
2014/30/EU
Anvendte harmoniserte standarder
EN 60335-1
EN 60335-2-79
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN IEC 63000: 2018
2000/14/EF: Vedlegg V
Lydeffektnivå dB(A)
Målt: 99,
Garantert: 93
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tlf.: +49 7195 14-0
Winnenden, 2022/12/01
Indhold
2006/42/EF (+2009/127/EF)
2014/30/EU
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tlf.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
Sisukord
Üldised juhised.... 47
Toode: Körgsurvepesur
Tüüp: 1.673-xxx
2006/42/EÜ (+2009/127/EÜ)
2014/30/EL
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel: +49 7195 14-0
Winnenden, 2022/12/01
Saturs
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
2006/42/WE (+2009/127/WE)
2014/30/UE
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Winnenden, 2022/12/01
Tartalom
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
2006/42/ES (+2009/127/ES)
2014/30/EU
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Winnenden, 2022/12/01
Obsah
Všeobecné upozornenia.... 69
2006/42/ES (+2009/127/ES)
2014/30/EÚ
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/12/01
Kazalo
Splošna navodila.... 72
Zaščita okolja 72
Namenska uporaba.... 73
Pribor in nadomestni deli.... 73
Obseg dobave.... 73
Opis naprave.... 73
Varnostne naprave 73
Simboli na napravi.... 73
Montaža 73
Zagon 73
Obratovanje.... 74
Transport.... 74
Skladiščenje 74
⑭ Stikalo naprave "0/OFF" / "I/ON"
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Winnenden, 2022/12/01
Cuprins
Directive UE relevante
2011/65/UE
2000/14/UE
2006/42/UE (+2009/127/UE)
2014/30/UE
Norme armonizate aplicate
EN 60335-1
EN 60335-2-79
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN IEC 63000: 2018
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germania)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden,
Sadržaj
| Opće napomene | 79 |
| Zaštita okoliša | 80 |
| Namjenska uporaba | 80 |
| Pribor i zamjenski dijelovi | 80 |
| Sadržaj isporuke | 80 |
| Opis uređaja | 80 |
| Sigurnosni uređaji | 80 |
| Simboli na uređaju | 80 |
| Montaža | 80 |
| Puštanje u pogon | 80 |
| Rad | 81 |
| Transport | 81 |
| Skladištenje | 81 |
| Njega i održavanje | 82 |
| Pomoć u slučaju smetnji | 82 |
| Jamstvo | 82 |
| Tehnički podaci | 82 |
| EU izjava o sukladnosti | 82 |
Opće napomene
Prije prve uporabe Vašeg uređaja pročitajte ove originalne upute za rad i priložene Sigurnosne naputke. Postupajte u
skladu s njima.
2006/42/EZ (+2009/127/EZ)
2014/30/EU
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Opunomoćenik za dokumentaciju:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Njemačka)
Tel.: +49 7195 14-0
Telefaks: +49 7195 14-2212
Winnenden, 2022/12/01
Sadržaj
Opšte napomene....83
Zaštita životne sredine 83
Namenska upotreba 83
Pribor i rezervni delovi.... 83
Obim isporuke 83
Opis uređaja 83
Sigurnosni uređaji.... 84
Simboli na uređaju.... 84
Montaža....84
Puštanje u pogon 84
Rad....84
Transport 85
Skladištenje 85
Nega i održavanje 85
Pomoć u slučaju smetnje 85
Garancija 86
Tehnički podaci 86
EU izjava o usklađenosti 86
Opšte napomene
Pre prve upotrebe, pročitajte originalna uputstva za upotrebu i priložene bezbednosne instrukcije. Postupajte u
skladu sa tim.
Sačuvajte obe knjižice za buduću upotrebu ili sledeće vlasnike.
2006/42/EZ (+2009/127/EZ)
2014/30/EU
Primenjene harmonizovane norme
EN 60335-1
EN 60335-2-79
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN IEC 63000: 2018
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Lice ovlašćeno za dokumentaciju:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Winnenden, 2022/12/01
Περιεχόμενα
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Tηλ.: +49 7195 14-0
Φαξ: +49 7195 14-2212
Winnenden, 2022/12/01
Содержание
Общие указания 90
EN 61000-3-3: 2013
EN IEC 63000: 2018
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Тел.: +49 7195 14-0
Факс: +49 7195 14-2212
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Тел.: +49 7195 14-0
Факс: +49 7195 14-2212
H. Jenner
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
Chairman of the Board of Management
S. Reiser
Manager Regulatory Affairs & Certification
71364 Winnenden (Germany)
Тел.: +49 7195 14-0
Факс: +49 7195 14-2212
Виненден, 2022/12/01
البيانات الفنية
| TOUSILI (LpaQA) | ||
| V220-240 | ||
| 1 | ||
| ~1 | ||
| Hz50-60 | ||
| A6 | ||
| ANOG (Hcmaia) | ||
| A10 | ||
| UoJlae (Mya) | ||
| MPa1,2 | ||
| C40 | ||
| min8 | ||
| Adaie (Jha) | ||
| MPa7,4 | ||
| MPa | ||
| I/min5,2 | Kmia (Amdad, Mya) | |
| I/min6,0 | Kmia (Amdad Cpuo) | |
| N11 | Qoeyarajag mcds (Pnftp agal) | |
| Abead (Oz) | ||
| kg4,0 | Ozun Tshgil (nmtpi) | |
| 178 | mm | ### |
| 219 | mm | ### |
| 415 | mm | ### |
| EN 60335-2-79 ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ## | ||
| 2,5> | m/s2 | ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### #### |
| 0,7 | m/s2 | K |
| dB(A)78 | LpA | ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ## |
| dB(A)3 | KpA | ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ## |
| dB(A)93 | LWA | ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### ### #### |
ال desp-fit Organization
natural_image
Black and white line drawing of a hand giving a thumbs-up gesture (no text or symbols)THANK YOU!
MERCI! DANKE! iGRACIAS!
Register your product and benefit from many advantages.
www.kaercher.com/welcome
Rate your product and tell us your opinion.
natural_image
Icon showing a gear and wrench inside a square frame (no text or symbols)www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
