K 7 Comfort Premium - Pressure washer Kärcher - Free user manual and instructions

USER MANUAL K 7 Comfort Premium Kärcher

3D rendered model of a mechanical pressure vessel with handle and internal components (no text or symbols visible)

Deutsch 5

English 11

Français 17

Italiano 24

Español 30

Português 37

Nederlands 43

Türkçe 49

Svenska 55

Suomi 61

Norsk 67

Dansk 73

Eesti 79

Latviešu 84

Lietuviškai 90

Polski 97

Magyar 103

Čeština 109

Slovenčina 115

Slovenščina 121

Română 127

Hrvatski 134

Srpski 140

Ελληνικά 146

Русский 152

Українська 159

Қазақша 166

Български 173

العربيه 180

A

Exploded view diagram of a water spray gun with numbered parts for identification and assembly reference.

B CLICK

Mechanical component diagrams showing two states (a and b) with red arrows indicating movement or force, no text or symbols present.

D a b CLICK

Mechanical assembly diagram showing a valve with a red arrow indicating direction (no text or symbols present)

F a CLICK b c d

G a CLICK b

Two-panel illustration showing a cable being inserted into a housing, labeled with 'a' and 'b', with red arrows indicating direction (no text or symbols beyond labels)

CLICK

J I I O

Diagram illustrating a lock mechanism with labeled parts and directional arrows, including a 3D model and internal components.

L a b

M CLICK

N b a d c

Mechanical component diagram showing a valve mechanism with a red arrow indicating rotation (no text or symbols present)

Illustration of a portable water heater with visible hoses and control panel (no text or symbols)

Mechanical assembly diagram showing pipe fitting, valve, and water drop (no text or symbols)

Inhalt

KÄRCHER Home & Garden App 5

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Technische Daten

KÄRCHER Home & Garden App	11
General notes	11
Safety devices	11
Symbols on the device	11
Environmental protection	12
Intended use	12
Accessories and spare parts	12
Scope of delivery	12
Overview of the device	12
Mounting	12
Startup	13
Operation	13
Transport	15

Storage.... 15

Care and maintenance.... 15

Troubleshooting guide.... 15

2020-200y 16

EU Declaration of Conformity.... 16

Technical data.... 17

KÄRCHER Home & Garden App

With the KÄRCHER Home & Garden app, you benefit from the following advantages when using your device:

• Application tips & expert knowledge
- Product information, overview of accessories and operating instructions
• Support and service contact
- Online shop - exclusive offers and much more Scan the code on the packaging or download the KÄRCHER Home & Garden app from your app store and conveniently register your product.

General notes

Read these original operating instructions and the enclosed safety instructions before using the device for the first

time. Proceed accordingly.

Keep both books for future reference or for future owners.

Safety devices

⚠ WARNING

Danger of injury!

Serious injuries due to missing, modified or ineffective safety devices.

Do not bypass or remove the safety devices and do not render them ineffective. Safety devices are provided for your own protection.

Power switch

The power switch prevents unintentional operation of the device.

Trigger locking button

The trigger locking button blocks the trigger and prevents the device from switching on unintentionally.

Auto-stop function

If the trigger of the high-pressure pump is released, the pressure switch turns off the pump and the high-pressure jet is stopped. The high-pressure pump switches on again when the trigger is pulled.

Motor circuit breaker

The motor circuit breaker shuts off the device if power consumption it too high.

Symbols on the device

Do not aim the high-pressure jet may at persons, animals, live electrical equipment or the device itself.

Protect the device against frost.

The device may not be connected to the public drinking water network.

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can a potential danger to human health and the envient. However, these components are required for correct operation of the device. Devices marked by symbol are not allowed to be disposed of together the household rubbish.

Cleaning work producing in oily waste water, e.g. washing engines, washing undercarriages etc., only be performed at washing stations with an oil larator.

Working with detergents may only be performed on watertight surfaces with connection to the waste or sewage system. Do not allow detergent to enter erways or the soil.

Extraction of water from public waterways is not permitted in some countries.

Notes on the content materials (REACH)

Current information on content materials can be found at: www.kaercher.de/REACH

Intended use

Use the high-pressure cleaner in private households only.

The high-pressure cleaner is intended for cleaning machines, vehicles, buildings, tools, façades, terraces, garden machines etc. using a high-pressure water jet.

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.

Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Overview of the device

For illustrations, refer to the graphics pages Illustrations are examples, details may vary Illustration A

①Jet nozzle head
② Spray lance
③ High-pressure gun
④ High-pressure hose release button
⑤Trigger
⑥ Trigger locking button
⑦ High-pressure hose
⑧ High-pressure gun holder
⑨ High-pressure hose drum

⑩Crank handle
⑪ Power switch
⑫Wheel
13Telescopic handle
⑭Telescopic handle unlocking button
15 Mains cable holder
⑯Mains cable
⑰Mains plug
18 Type plate
⑲Carrying handle
20* Garden hose
21 Coupling for the water connection
22** KÄRCHER suction hose
23 Screen
24 Water connection
25 Detergent bottle
26 Foam nozzle
27 Spray wand holder
28 Foam nozzle release button
29 Foam dosing lever

* additionally required

** optionally available

Mounting

For the figures, please refer to the graphics page.

Fit the supplied loose parts onto the device before starting up the device.

Installing the telescopic handle

1. Insert the telescopic handle into the device until it audibly clicks into place. Illustration B

Installing the high-pressure gun holder

1. Installing the high-pressure gun holder: a Insert the high-pressure gun holder into the openings on the device and b press downwards until it clicks into place. Illustration C

Installing the mains cable holder

1. Installing the mains cable holder: a Insert the mains cable holder into the openings on the device and b fold it into the device until you hear it click into place. Illustration D

Installing the water connection coupling

1. Screw the water connection coupling onto the water connection on the device. Illustration E

Installing the foam nozzle on the device

1. Screw the foam nozzle onto the detergent bottle. Illustration F

2. Snap the foam nozzle into place on the device.

3. To remove, press the foam nozzle release button and remove the foam nozzle from the device.

Startup

Note

Device K 7:

Take care not to exceed the maximum permissible mains impedance at the electrical connection point, see Technical data. Otherwise, other electrical loads may be affected when the device is switched on (such as a flickering lamp).

Contact your electricity supplier in the case of any uncertainties regarding the mains grid impedance at your electrical connection point.

1. Place the device on a level, horizontal surface.

ATTENTION

Risk of damage during operation with wound-up high-pressure hose!

Damage on the high-pressure hose.

Unwind the high-pressure hose completely and lay it out without knots, loops or twists before operating the device.

1. Pull the high-pressure hose to fully unwind it from the hose reel.

2. Lay out the high-pressure hose without knots, loops or twists.

3. Mount the high-pressure hose on the high-pressure gun.

a Align the high-pressure hose and

b insert it into the high-pressure gun until it audibly clicks into place.

Illustration G

1. Check the secure connection by pulling on the high-pressure hose.

2. Unwind the power cord completely.

Illustration H

1. Insert the mains plug into a mains socket.

Connecting the water supply

ATTENTION

Risk of damage through contaminated water!

Contamination in the water can damage the high-pressure pump and accessories.

Operate the device only with clear fresh water without contamination or additives.

Never use contaminated water, waste water or salt water.

Kärcher recommends using the optional Kärcher water filter.

1. Check the pressure, temperature and quantity of the supply water for compliance with the requirements, see Technical data.

Note

Observe the water distribution company regulations.

Connection to the water line

ATTENTION

Risk of damage when using hose couplings made of brass with AquaStop function from third-party suppliers.

Damage to the high-pressure pump.

Only use hose couplings with/without AquaStop function from Kärcher, hose couplings without AquaStop function or hose couplings made of plastic with AquaStop function from third-party suppliers.

1. Plug the garden hose onto the water connection coupling.

Note

Reinforced garden hose required: minimum diameter 1/2 inch (13 mm), minimum length 7.5 m, with standard quick coupling.

Illustration I

1. Connect the garden hose to the water line.

2. Open the water tap completely.

Suctioning water from the containers

This device with the KÄRCHER suction hose is suitable for sucking water from e.g. water butts or ponds (for maximum suction height, see Technical data).

1. Unscrew the coupling on the water connection.

2. Fill the KÄRCHER suction hose with water.

3. Screw the KÄRCHER suction hose onto the water connection of the device and hang it in a water source.

Vent the device

Note

To vent the device, do not fit the spray lance or foam nozzle to the high-pressure gun.

1. Switch on the device by turning the device switch to the "I" position. To switch off the device, turn the device switch to the "0" position.

Illustration J

1. Unlocking the trigger.

Illustration K

1. Actuate the trigger. The device switches on.

2. Allow the device for run a maximum of 2 minutes until the water escaping from the high-pressure gun is free of air bubbles.

Note

If the foam nozzle is fitted to the device, detergent is added.

1. Release the trigger.

2. Lock the trigger.

Operation

△CAUTION

Risk of injury from escaping water under high pressure!

Injuries

Only disconnect the high-pressure hose from the high-pressure gun or the device if there is no pressure in the system.

ATTENTION

Risk of damage due to the pump running dry!

Pump damage

Switch off the device if it does not build up pressure within 2 minutes.

Proceed according to the instructions in Troubleshooting guide.

Set spray type

1. Lock the trigger.

2. Align the spray lance and insert it into the high-pressure gun and lock it into position by turning it 90°.

Illustration L

ATTENTION

Risk of damage if the jet nozzle head is turned during operation!

Damage to the spray lance

Release the trigger before turning the jet nozzle head.

1. Turn the jet nozzle head to set a suitable spray type for the cleaning task and the object.

The corresponding pictogram must point upwards.

Illustration M

Note

The sensitivity of materials can vary greatly depending on age and condition. The recommendations are therefore not binding.

Pictogram	Spray form and pressure	Recommended fore.g.
	Detergent spray with low pressure	All surfaces suitable for use with detergents
	Wide flat stream with medium pressure	Car/motorcycle, bicycles, brick / sandstone surfaces, plastered walls, wood surfaces, plastic/rattan furniture
	Narrow flat stream with high pressure	Stone tiles, asphalt, metal surfaces, garden utensils (wheelbarrow, spade, etc.)
	Rotary jet with maximum pressure	Particularly stubborn dirt on stone tiles, asphalt, metal surfaces, garden tools (wheelbarrow, spade, etc.)

Operation with detergent

⚠️DANGER

Health hazards due to detergents!

Serious damage to health

Observe the detergent manufacturer's safety data sheet.

Wear the prescribed personal protective gear.

ATTENTION

Risk of damage from unsuitable detergents!

Material damage

Only use detergents that have been approved by Kärcher and are suitable for the objects to be cleaned.

Observe the safety instructions, dosage recommendations and notes enclosed with the detergents.

Use detergents sparingly.

ATTENTION

Risk of damage due to detergents acting too long and drying out!

Material damage

Do not apply detergent to hot surfaces and observe the maximum contact time.

Do not allow detergent to dry on the surfaces being cleaned.

Note

KÄRCHER detergents ensure fault-free, effective operation. Please ask us for advice and observe our catalog or our detergent information sheets.

1. The detergent can be mixed in or applied with the foam nozzle.

Mixing

a Install the foam nozzle on the device.

The position of the foam dosing lever is not important.

b Adjust the detergent spray at the jet nozzle head, see Set spray type.

The detergent is mixed into the water stream during operation.

Using the foam nozzle

a Remove the foam nozzle from the device and install it on the high-pressure gun instead of the spray lance.

Use the foam dosing lever to set the desired amount of foam.

1. Unlocking the trigger.
2. Pull the trigger and spray the detergent sparingly onto the dry surfaces.
3. Allow the detergent to act (not to dry).
4. Rinse off the loosened dirt using an appropriate spray type, see Operation without detergent.

Operation without detergent

ATTENTION

Risk of damage due to too close a spray distance or inappropriate spay type!

Damage to painted or sensitive surfaces.

Keep at least 30 cm spray distance when cleaning painted surfaces.

Do not clean car tires, paint or delicate surfaces such as wood with the rotary jet.

1. Set a suitable spray type for the cleaning task and the object, see Set spray type.
2. Unlocking the trigger.
3. Pull the trigger and carry out the cleaning process.

Interrupting operation

1. Release the trigger.

The device stops. The high-pressure in the system is maintained.

1. Lock the trigger.
2. Place the high-pressure gun in the high-pressure gun holder.
3. For work breaks longer than 5 minutes, switch off the device.

Ending operation

△CAUTION

Risk of injury from escaping water under high pressure!

Injuries

Only disconnect the high-pressure hose from the high-pressure gun or the device if there is no pressure in the system.

1. Release the trigger.
2. Close the water tap.
3. Actuate the trigger for 30 seconds.

The pressure in the system is released.

1. Release the trigger.
2. Lock the trigger.
3. Switch off the device.

△CAUTION

Risk of scalding!

Scalding due to hot water escaping after operation, when disconnecting the garden hose or high-pressure hose.

Wear suitable protective gloves.

After operation, allow the device to cool down before disconnecting the garden hose or high-pressure hose.

1. Allow the device to cool down or wear protective gloves.
2. Disconnect the device from the water supply.
3. Pull the mains plug out of the mains socket.

Transport

△CAUTION

Risk of injury or damage due to the weight of the device!

Injury and damage.

Be aware of the weight of the device during transport and storage.

ATTENTION

Risk of damage due to leaking detergent!

Material damage

Always transport and store the detergent bottle with the foam nozzle fitted upright, not lying down.

Transporting the device

Pulling/pushing the device

1. Unlock the telescopic handle and pull upwards until it engages.

Illustration N

1. Tilt the device onto the wheels and pull or push it.

Carrying the device

1. Unlock the telescopic handle and slide it together.

2. Lift up and carry the device by the telescopic handle and the carrying handle.

Transporting the device in a vehicle

1. Secure the device against slipping and tipping over.

Storage

⚠️ CAUTION

Risk of injury or damage due to the weight of the device!

Injury and damage.

Be aware of the weight of the device during transport and storage.

ATTENTION

Risk of damage due to leaking detergent!

Material damage

Always transport and store the detergent bottle with the foam nozzle fitted upright, not lying down.

Storing the device

△CAUTION

Risk of injury from escaping water under high pressure!

Injuries

Only disconnect the high-pressure hose from the high-pressure gun or the device if there is no pressure in the system.

1. Finish operation, see Ending operation.
2. Remove the spray wand from the high-pressure gun.
3. Engage or place the spray lance on a spray lance holder.
4. Press the high-pressure hose release button and pull off the high-pressure hose on the high-pressure gun.
5. Place the high-pressure gun in the high-pressure gun holder.

ATTENTION

Risk of damage if wound in the wrong direction!

Damage on the high-pressure hose

Only turn the high-pressure hose drum in the specified direction.

1. Turn the crank handle clockwise to wind up the high-pressure hose.

Illustration O

1. Store the power cable on the power cable holder. Illustration P

Observe the additional notes before storing the device for a long period of time, see Care and maintenance.

Frost protection

ATTENTION

Risk of damage due to frost!

Material damage

Empty the water completely from the device and accessories.

Always protect the device and accessories from frost.

1. Finish operation, see Ending operation. Leave the mains plug in the mains socket.

2. Switch the device on.

3. Wait a maximum of 1 minute until no more water comes out.

4. Switch off the device.

5. Drain the water from the accessories.

6. Pull the mains plug out of the mains socket.

7. Store the device and accessories in a frost-protected space.

Care and maintenance

⚠️DANGER

Danger of death!

Fatal injuries due to electric shock when touching live parts.

Do not touch any live parts.

Switch off the device.

Pull the mains plug out of the mains socket.

The device is maintenance-free, i.e. you do not need to perform periodic maintenance work.

Clean the sieve in the water connection

ATTENTION

Risk of damage due to missing or damaged sieve!

Damage to the high-pressure pump

Do not operate the device without a sieve.

Do not clean the sieve with hard, pointed objects.

Clean the sieve in the water connection if necessary.

1. Unscrew the coupling on the water connection.

2. Pull out the sieve.

Illustration Q

1. Clean the sieve under running water.

2. Insert the sieve into the water connection.

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorized Customer Service.

⚠️DANGER

Danger of death!

Fatal injuries due to electric shock when touching live parts.

Do not touch any live parts.

Switch off the device.

Pull the mains plug out of the mains socket.

Device is not running

The voltage supply is interrupted.

1. Check that the mains plug is plugged in.

2. Switch the device on.

3. Unlock and actuate the trigger.

The device starts up, otherwise:

1. Check if the voltage specified on the type plate matches the voltage of the power source.

2. Unplug the mains plug from the mains socket and inspect the mains cable and mains plug for damage. A damaged power cord must be replaced promptly by an authorized Customer Service.

The motor circuit breaker is active.

1. If the motor is overloaded, the motor circuit breaker switches the device off.
2. Switch off the device.
3. Allow the device to cool off for 1 hour.
4. Switch on the device and put it into operation. If the fault occurs several times, have the device checked by Customer Service.

Detergent is not sucked in

An unsuitable spray type is set.

1. Turn the jet nozzle head to the "detergent spray" position.

The foam nozzle with the detergent bottle is not installed on the device.

1. Install the foam nozzle with the filled detergent bottle on the device.

The detergent bottle is empty.

1. Install a full bottle of detergent.

The device does not reach required pressure

An unsuitable spray type is set on the jet nozzle head.

1. Set a spray type with a high-pressure jet.

The water supply is too low.

1. Open the water tap completely.
2. Check the water inlet for sufficient flow rate.
3. Lay the garden hose without kinks.
4. Make sure that the maximum suction height is not exceeded.

The sieve in the water connection is contaminated.

1. Clean the sieve in the water connection.
   There's air in the device.
2. Vent the device.

Strong pressure fluctuations

The jet nozzle in the jet nozzle head is dirty.

1. Clean the jet nozzle from the front using a needle and flush it through.

The water supply quantity is too low.

1. Open the water tap completely.
2. Lay the garden hose without kinks.
3. Clean the sieve in the water connection.
4. Check the water supply quantity and increase if necessary.

Device leaking

The device leaks a small amount for technical reasons.

1. In case of severe leakage, contact the authorized Customer Service.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

(See overleaf for the address)

Further warranty information (if available) can be found in the service area of your local Kärcher website under "Downloads".

EU Declaration of Conformity

EU Declaration of Conformity

We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us. The manufacturer shall bear sole responsibility for issuing of this declaration of conformity.

Product: High-pressure cleaner

Type: K 7 Comfort Premium

Directives and Regulations

2006/42/EC (+2009/127/EC)

2011/65/EU

2000/14/EC

2009/125/EC

Commission Regulation(s)

(EU) 2019/1781

Harmonised standards used

EN 60335-1

EN 60335-2-79

EN 62233: 2008

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 1997 + A1: 2001 + A2: 2008

EN 61000-3-2: 2014

EN 61000-3-3: 2013

EN IEC 63000: 2018

Applied conformity evaluation method

2000/14/EG: Annex V

Sound power level dB(A)

K 7 Comfort Premium

Measured: 90

Guaranteed: 93

Name and address

Documentation supervisor:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

The undersigned act on behalf of and with the authority of the Board of Directors.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Ph.: [phone]

Fax: [phone]

Declaration of Conformity (UK)

UK Declaration of Conformity

We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us. The manufacturer shall bear sole responsibility for issuing of this declaration of conformity.

Product: High-pressure cleaner

Type: K 7 Comfort Premium

Directives and Regulations

S.I. 2008/1597 (as amended)

S.I. 2012/3032 (as amended)

S.I. 2001/1701 (as amended)

S.I. 2010/2617 (as amended)

Commission Regulation(s)

(EU) 2019/1781

Designated standards used

EN 60335-1

EN 60335-2-79

EN 62233: 2008

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 1997 + A1: 2001 + A2: 2008

EN 61000-3-2: 2014

EN 61000-3-3: 2013

EN IEC 63000: 2018

Applied conformity assessment procedure

S.I. 2001/1701 (as amended): Schedule 8

Sound power level dB(A)

K 7 Comfort Premium

Measured: 90

Guaranteed: 93

Name and address

Documentation supervisor:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

The undersigned act on behalf of and with the authority of the Board of Directors.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Ph.: [phone]

Fax: [phone]

Technical data

Electrical connection
Voltage	V
Phase ~ 1
Frequency Hz 50
Maximum permissible mains grid impedance	0,292 + j 0,183
Current consumption A 13
Protection type IPX5
Protection class I
Power protection (slow-blowing) A 16
Water connection
Feed pressure (max.) MPa 1,2
Input temperature (max.) °C	60

Input amount (min.)	l/min	11
Suction height (max.)	m	0,5

Device performance data

Operating pressure	MPa 15
Max. permissible pressure MPa 18
Water flow rate	l/min	9,2
Detergent flow rate	l/min	0,3
High-pressure gun recoil force	N 22

Dimensions and weights

Typical operating weight	kg	21,8
Length	mm	465
Width	mm	354
Height	mm	750

Values determined in accordance with EN 60335-2-79

Hand-arm vibration value ahv	m/s2	2,2
Uncertainty K	m/s2	0,7
Sound level LpA	dB(A)	76
Uncertainty K	dB(A)	2,6
Sound power level LwA	dB(A)	90
Guaranteed sound power level LWA,d	dB(A)	93

Subject to technical modifications.

Contenu

2006/42/CE (+2009/127/CE)

2011/65/UE

2000/14/CE

2009/125/CE

Ordonnance(s) appliquée(s)

(UE) 2019/1781

71364 Winnenden (Germany)

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, le 01/09/2025

71364 Winnenden (Germany)

Fusible principal (lent) A 16

71364 Winnenden (Germania)

Tel.: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01/09/2025

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Dati tecnici

2006/42/CE (+2009/127/CE)

2011/65/UE

2000/14/CE

2009/125/CE

71364 Winnenden (Germany)

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 01/09/2025

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Datos técnicos

2006/42/CE (+2009/127/CE)

2011/65/UE

2000/14/CE

2009/125/CE

71364 Winnenden (Germany)

Telephone: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01/09/2025

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

Technische gegevens

2006/42/AT (+2009/127/AT)

2011/65/AB

2000/14/AT

2009/125/EG

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

Telefon: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 01.09.2025

D-71364 Winnenden (Germany)

Tfn: [phone]

Fax: [phone]

Tekniska data

71364 Winnenden (Germany)

Puhelin: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 1.9.2025

71364 Winnenden (Germany)

Puh.: [phone]

2006/42/EF (+2009/127/EF)

2011/65/EU

2000/14/EF

2009/125/EF

2000/14/EF: Vedlegg V

Lydeffektnivå dB(A)

K 7 Comfort Premium

Målt: 90

Garantert: 93

Navn og adresse

71364 Winnenden (Germany)

Telefon: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

Tlf.: [phone]

2006/42/EF (+2009/127/EF)

2011/65/EU

2000/14/EF

2009/125/EF

71364 Winnenden (Germany)

Telefon: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

Tlf.: [phone]

Fax: [phone]

Tekniske data

Elektrisk tilslutning

Spænding	V
Fase ~ 1

Frekvens Hz 50

Maks. tilladt netimpedans Ω

0,292 +

j 0,183

Strømforbrug A 13

Toode: Körgsurvepesur

Tüüp: K 7 Comfort Premium

2006/42/EÜ (+2009/127/EÜ)

2011/65/EL

2000/14/EÜ

2009/125/EÜ

71364 Winnenden (Germany)

Tel: [phone]

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

Tel: [phone]

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Vinendene (Winnenden), 01.09.2025.

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Vinendenas, 2025 m. rugsëjo 1 d.

2006/42/WE (+2009/127/WE)

2011/65/UE

2000/14/WE

2009/125/WE

71364 Winnenden (Germany)

Telefon: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01.09.2025 r.

71364 Winnenden (Germany)

Tel.: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

2006/42/ES (+2009/127/ES)

2011/65/EU

2000/14/ES

2009/125/ES

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

2006/42/ES (+2009/127/ES)

2011/65/EÚ

2000/14/ES

2009/125/ES

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01.09.2025

71364 Winnenden (Germany)

Tel.: [phone]

Fax: [phone]

2006/42/ES (+2009/127/ES)

2011/65/EU

2000/14/ES

2009/125/ES

Uporabljena(-e) uredba(-e)

(EU) 2019/1781

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 1. 9. 2025

Podpisniki ravnajo po navodilih in s pooblastilom upra-ve.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germania)

Telefon: [phone]

Fax: [phone]

H. Jenner

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germania)

Tel.: [phone]

Fax: [phone]

Date tehnice

2006/42/EZ (+2009/127/EZ)

2011/65/EU

2000/14/EZ

2009/125/EZ

Primijenjene uredbe

(EU) 2019/1781

71364 Winnenden (Germany)

Tel.: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 01.09.2025.

2006/42/EZ (+2009/127/EZ)

2011/65/EU

2000/14/EZ

2009/125/EZ

Primenjena(e) odredba(e)

(EU) 2019/1781

Primenjene harmonizovane norme

EN 60335-1

EN 60335-2-79

EN 62233: 2008

EN 55014-1: 2017 + A11: 2020

EN 55014-2: 1997 + A1: 2001 + A2: 2008

EN 61000-3-2: 2014

EN 61000-3-3: 2013

EN IEC 63000: 2018

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

Potpisnici deluju po nalogu i uz punomoć upravnog odbora.

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Tel.: [phone]

71364 Winnenden (Germany)

Tηλ.: [phone]

Φαξ: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

Tηλ.: [phone]

Φαξ: [phone]

Τεχνικά στοιχεία

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

Chairman of the Board of Management

S. Reiser

Manager Regulatory Affairs & Certification

Winnenden, 2025/09/01

71364 Winnenden (Germany)

H. Jenner
Chairman of the Board of Management

S. Reiser
Manager Regulatory Affairs & Certification

Виненден, 2025/09/01

71364 Winnenden (Germany)

Тел.: [phone]

Факс: [phone]

Технически данни

QR code image containing encoded data, no visible human-readable text

Scan QR Code for download and easy product registration in Home & Garden App or website.

karcher.com/register

KARCHER BRING BACK THE WOW LIKE AN EXPERT. CREATE ASSIGNS Logos | 🎯 G CONTINUING AS SLIGHT LIFE HODS AND CABBEGES FOR 2019.16.2019 AND ECONOMICS!

EN – Download the Home & Garden App to register your device for full support in cleaning.

■ Control of smart products
■ Application tips & expert knowledge
■ Product information, overview of accessories and operating instructions
■ Support and service contact
■ Online shop – exclusive offers and much more

karcher.com/dealersearch

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28-40

71364 Winnenden (Germany)