PLLA 12 B2 - LED Lighting PARKSIDE - Free user manual and instructions

USER MANUAL PLLA 12 B2 PARKSIDE

Translation of the original instructions

NL 8E

ACCU-LED-WERKLAMP

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

GB/IE Translation of the original instructions Page 27

All Parkside devices and chargers PLGK 12 A1 / PLGK 12 B2 The X12V Team Series are with the

Battery packs PAPK 12 A1 / PAPK 12 A2 / PAPK 12 B1 compatible.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DEUTSCHLAND

www.kompernass.com

Intended use 28
Features 28
Package contents 29
Technical specifications 29

General power tool safety warnings 31

1.Work area safety. 31
2. Electrical safety 3 2
3. Personal safety 33
4. Power tool use and care 3 4
5. Use and handling of the cordless electrical power tool 35
6. Service 36

Safety guidelines for battery chargers 37

Safety instructions for cordless lamps 38

Before use 39

Removing/charging/inserting the battery pack 39

Operation 40

Switching on and off 40
Battery charge level 40
Swivelling the cordless LED working light 40
Magnetic holder 41
Belt clip 41
Tripod thread 41

Maintenance and cleaning 41

Disposal 42

Disposal of the appliance 42

Translation of the original Conformity Declaration . 48

Ordering a replacement battery . 50

Telephone ordering 50

CORDLESS LED WORK LIGHT PLLA 12 B2

Introduction

Congratulations on the purchase of your new appliance. You have chosen a high-quality product. The operating instructions are part of this product. They contain important

information about safety, usage and disposal. Before using the product, please familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner.

Intended use

This cordless LED working light is used to illuminate dry, poorly lit interior areas, such as garages, cellars or attics.

The cordless LED working light is not suitable for lighting rooms in houses. Any other usage or modification of the cordless LED working light is deemed to be improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse. This appliance is not intended for commercial use.

Features

Cordless LED working light
ON/OFF switch
3 Battery display LED
4 Release buttons
5 Battery pack
6 Belt clip
Magnet
1/4" internal thread for tripod

9 High-speed battery charger

10 Controlled

Charge level indicator LED

Package contents

1 cordless LED working light
1 high-speed battery charger
1 battery pack
1 set of operating instructions

Technical specifications

Cordless LED working light PLLA 12 B2:

Rated voltage: 12 V (DC)

Rated power P_ : 5 W

Number of LEDs: 10

Luminous flux: 480 lm

Brightness levels: 2

Protection class: III/

(Protection through extra-low voltage)

Protection Class: IP20

protection against dust and water splashes suitable for difficult conditions

Battery: PAPK 12 A2

Type: Lithium LITHIUM ION

Rated voltage: 12 V (DC)

Capacity: 2000 mAh/24 Wh

Cells: 3

High-speed battery charger: PLGK 12 A1

INPUT:

Rated voltage: 220 - 240V (AC), 50 - 60Hz

Power consumption: 50 W

OUTPUT:

Rated voltage: 12 V (DC)

Rated current: 2.4 A

Charging time: approx. 60 min

Fuse (internal): 2 A

Protection class: II / (double insulation)

General power tool safety warnings

WARNING!

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the safety instructions refers to your mains-operated (with power cord/AC adapter) power tools or battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control of the appliance.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Use and handling of the cordless electrical power tool

a) Charge a rechargeable battery unit using only the charger recommended by the manufacturer. Chargers are often designed for a particular type of rechargeable battery unit. There is the danger of fire if other types of rechargeable battery units are used.

b) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable batteries may lead to a risk of injury or fire.

c) When they are not being used, store rechargeable battery units away from paperclips, coins, keys, nails, screws or other small metal objects that could cause the contacts to be bridged. Short-circuiting the contacts of a rechargeable battery unit may result in heat damage or fire.

d) Fluids may leak out of rechargeable battery units if they are misused. If this happens, avoid contact with the fluid. If contact occurs, flush the affected area with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns.

ON! RISK OF EXPLOSION! Never charge non-rechargeable batteries.

Protect the rechargeable battery from heat; for example, from continuous exposure to sunlight, fire, water and moisture. There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety guidelines for battery chargers

This appliance may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks. Do not allow children to use the appliance as a toy. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.

To avoid potential risks, damaged mains cables should be replaced by the manufacturer, their customer service department or a similarly qualified person.

The charger is suitable for indoor use only.

WARNING!

• Do not operate the appliance with a damaged cable, power cord or mains plug. Damaged power cords can result in danger to life due to electric shock.
• Do not use any accessories that are not recommended by PARKSIDE. This can lead to an electric shock or fire.

NOTE!

This charger can only charge the following batteries: PAPK 12 A1 / PAPK 12 A2 / PAPK 12 B1.
A current list of battery compatibility can be found at www.Lidl.de/Akku.

Safety instructions for cordless lamps

• Do not cover the appliance during operation. The cordless LED working light heats up during operation and may cause burns.
• Do not look into the light beam. Do not direct the light beam at people or animals.
  Do not allow children to use the appliance. You could inadvertently dazzle other people or yourself.
• Keep the appliance away from magnetically sensitive devices and magnetic data media. The magnet may cause irreversible loss of data.
  Check the durability of the appliance fastening. Dropping the appliance may cause injury.
  The light source of this appliance cannot be replaced. Once the light source has reached the end of its lifespan, the entire lamp must be replaced.

Before use

Removing/charging/inserting the battery pack

CAUTION!

Always unplug the appliance before you remove the battery pack 5 from or connect the battery pack to the high-speed battery charger 9

NOTE

The battery pack is supplied partially charged. Before first use, charge the battery pack 5 in the high-speed battery charger for at least 1 hour. This ensures maximum performance of the battery pack 5 you can charge the lithium-ion battery at any time without shortening its service life. Interrupting the charging process does not damage the battery pack 5

If the battery pack 5 overheats during operation, it cannot be charged. Allow it to cool down first.

Never charge the battery pack 5 if the ambient temperature is below 10^ or above 40^ .

1. To remove the battery pack, press the release buttons and pull the battery pack out of the appliance.
2. Insert the battery pack 5 into the high-speed battery charger . 9
3. Insert the mains plug into the socket. The control LED⑩ lights up red
4. The green charge level indicator LED indicates that the charging process is complete and the battery pack is ready for use.
5. Insert the battery pack 5 into the appliance.

Operation

Never use the appliance for purposes other than those for which it was designed and only with original parts/accessories. Using attachments or accessory tools other than those recommended in the operating instructions can lead to a risk of injury.

Switching on and off

Switching on:

Press the ON/OFF switch2.

The appliance lights up at maximum brightness.

To reduce the brightness, hold down the ON/OFF switch 2 for approx. 2 seconds.

To switch back to maximum brightness, press the ON/OFF switch 2 gain for approx. 2 seconds.

Switching off:

Press the ON/OFF switch2.

Battery charge level

The status will be shown on the battery display LED 3 as follows:

RED/ORANGE/GREEN = maximum charge

RED / ORANGE = medium charge

RED = low charge - charge the battery

Swivelling the cordless LED working light

The cordless LED working light can be swivelled/adjusted into 8 positions.

Swivel the cordless LED working light by clicking it into one of the 8 positions.

Magnetic holder

NOTE!

Bear in mind that sliding the appliance may scratch the magnetic surface!

You can use the magnets to fix the appliance onto magnetic surfaces.

Belt clip

You can use the belt clip to attach the appliance to a belt or similar.

Tripod thread

You can use the 1 / 4'' internal thread screw the appliance onto a tripod (not included).

Maintenance and cleaning

RNING! RISK OF INJURY! Always switch the appliance off and remove the battery before carrying out any work on the appliance.

The appliance is maintenance-free.
Remove all dirt from the appliance. Use a soft, dry cloth for this purpose.
Do not allow any liquids to get into the appliance.

Disposal

Disposal of the appliance

The packaging is made from environmentally friendly material and can be disposed of at your local recycling plant.

not dispose of power tools in your normal household waste!

European Directive 2012/19/EU requires that worn-out power tools be collected separately and recycled in an environmentally compatible manner.

Do not dispose of batteries in your normal household waste! Incorrectly disposed of batteries can cause environmental damage!

Defective or worn-out rechargeable batteries must be recycled according to Directive 2006/66/EC. Take the battery pack and/or appliance to a nearby collection facility.

Please consult your local authorities regarding suitable disposal of worn out power tools/battery packs.

Dispose of the packaging in an environmentally friendly manner.

Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings:

1-7:plastics,

20-22: paper and cardboard,

80-98: composites

Your local community or municipal authorities can provide information on how to dispose of the worn-out product.

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase.

If any material or manufacturing fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and of when it occurred.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be considered as consumable parts such as switches, batteries or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.

• You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com.

This QR code will take you directly to the Lidl service page (www.lidl-service.com) where you can open your operating instructions by entering the item number (IAN) 123456.

Service

WARNING!

Have the appliances repaired by the Service Centre or a qualified electrician and only using genuine replacement parts. This will ensure that the safety of the appliance is maintained.

WARNING!

Always ensure that the power plug and power cord are replaced only by the manufacturer of the appliance or its customer service. This will ensure that the safety of the appliance is maintained.

NOTE

Replacement parts can be ordered via our service hotline.

Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

IAN 323150_1901

Importer

Please note that the following address is not the service address. Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Translation of the original Conformity Declaration

We, KOMPERNASS HANDELS GMBH, document officer: Mr Semi Uguzlu, BURGSTR. 21, 44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards, normative documents and EC directives:

EC Low Voltage Directive

(2014/35/EU) (charger only)

EMC (Electromagnetic Compatibility)

(2014/30/EU)

RoHS Directive

(2011/65/EU)*

*The manufacturer bears the full responsibility for compliance with this conformity declaration. The object of the declaration described above complies with the requirements of the Directive 2011/65/EU of the European Parliament and Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical and electronic appliances.

ErP 2009/125/EU

ErP (EU) 2015/1428

ErP (EU) No. 1194/2012

Applied harmonised standards:

EN 60598-1:2015

EN 60598-2-8:2013

EN 62493:2015

EN 60335-1:2012/A13:2017

EN 60335-2-29:2004/A11:2018

EN 62233:2008

EN 55015:2013/A1:2015

EN 55015:2013

EN 61547:2009

EN 55014-1:2017; EN 55014-2:2015

EN 61000-3-2:2014

EN 61000-3-3:2013

EN 50581:2012

Type designation of machine:

Cordless LED working light PLLA 12 B2

Year of manufacture: 07 - 2019

Serial number: IAN 323150_1901

Bochum, 11/07/2019

CE

Semi Uguzlu

• Quality Manager -

We reserve the right to make technical changes in the context of further product development.

Ordering a replacement battery

If you want to order a replacement battery for your appliance, you can do so easily via the Internet on www.kompernass.com or by telephone. Due to limited stocks, this item may sell out in a relatively short time.

NOTE

• Online ordering of replacement parts might not be possible in some countries. In this is the case, please contact the Service hotline.

The promotion is limited to one battery per customer/appliance and also to a timeline of two months after the promotion period. Thereafter, the replacement battery can be ordered as a replacement part under other conditions.

Telephone ordering

Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

Service Malta

Tel.: [phone]

E-Mail: [e-mail]

To ensure fast processing of your order, have the article number of your appliance to hand (e.g. IAN 323150) in case of questions. The article number can be found on the type plate or the title page of these instructions.

Table des matieres

Introduction 52

Chere cliente, cher client,

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

ALLEMAGNE

www.kompernass.com

Directive RoHS (2011/65/EU)*

Baladeuse LED rechargeable PLLA 12 B2

Nominate spanning: 220 - 240 V ~ (wisselstroom), 50-60 Hz

Zekering (intern): 2 A

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DUITSLAND

www.kompernass.com

Akumulator: PAPK 12 A2

Typ:

LITHIUM LITOWO-JONOWY

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

NIEMCY

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

NÉMECKO

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

NEMECKO

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com