S_JR501DC - Radio Vonroc - Free user manual and instructions

Technical specifications	Vonroc S_JR501DC portable radio
Radio type	FM / AM
Power supply	Rechargeable battery or mains
Output power	5 Watts
Frequencies	87.5 - 108 MHz (FM), 530 - 1700 kHz (AM)
Dimensions	25 x 15 x 10 cm
Weight	1.2 kg
Usage	Ideal for outdoor activities, camping, and home use
Maintenance	Clean regularly with a soft cloth, avoid moisture
Safety	Do not expose to water, use only with the supplied adapter
General information	2-year warranty, customer support available

Frequently Asked Questions - S_JR501DC Vonroc

How to turn on the Vonroc S_JR501DC radio?

To turn on the radio, press the power button located on the front panel until the screen lights up.

How to adjust the radio volume?

Use the volume knob located on the front panel to increase or decrease the sound.

The radio does not receive FM stations, what should I do?

Make sure the antenna is fully extended and try searching for stations again using the auto search function.

Can I listen to music via Bluetooth with the Vonroc S_JR501DC?

Yes, activate Bluetooth mode on your radio and pair it with your Bluetooth device to start listening to music.

How to reset the radio to factory settings?

Press and hold the reset button located on the back of the radio for about 5 seconds.

The radio does not charge, what should I do?

Check that the charging cable is properly connected to the radio and the power source. Also try using another power adapter.

How to change the language of the radio interface?

Access the settings using the Menu button, then select the Language option to choose the desired language.

The radio turns off by itself, why?

It is possible that the power saving function is activated. Check the settings to disable this feature.

The sound quality is poor, how to improve it?

Try repositioning the radio for better reception or adjust the equalizer settings in the audio settings menu.

How to save my favorite stations?

When you are on a station you want to save, press and hold the preset button you want to use until you hear a beep.

USER MANUAL S_JR501DC Vonroc

Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Keep the safety warnings and the instructions for future reference.

The following symbols are used in the user manual and on the appliance:

Read the user manual

Denotes risk of personal injury, loss of life or damage to the appliance in case of non-observation of the instructions in this user manual.

Do not use in rain.

Remove the battery from the device before you dispose of it. Batteries must never be disposed of in your household waste. Being the end user, you are obliged to return used batteries. You can return used batteries free-of-charge to the point of sale or its immediate vicinity (e.g. municipal collecting points or in shops).

The product complies with the applicable safety standards in the European directives.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

1) Work area safety

a) Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Do not use the jobsite radio if the power switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
b) Disconnect the battery pack from the jobsite radio when it is not in use.
c) Keep the jobsite radio out of the reach of children and do not allow persons unfamiliar with the radio or these instructions to operate the radio.
d) Use the jobsite radio and accessories in accordance with these instructions. Use of the radio for operations different from those intended could result in a hazardous situation.

4) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130^ may cause explosion. NOTE The temperature, 130^ can be replaced by the temperature, 265^ .
g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SAFETY WARNINGS FOR JOBSITE RADIO

a) Check the jobsite radio and battery for exterior defects. Do not use the radio when there are visible defects. Do not open the jobsite radio yourself and have it repaired only by qualified personnel using original spare parts. Damaged radios, batteries and/or chargers increase the risk of electric shock.
b) This jobsite radio is not intended for use by children and persons with physical, sensory or mental limitations or a lack of experience or knowledge. This radio can be used by children aged 8 or older and by persons who have physical, sensory or mental limitations or

a lack of experience or knowledge if a person responsible for their safety supervises them or has instructed them in the safe operation of the jobsite radio and they understand the associated dangers. Otherwise, there is a danger of operating errors and injuries.
c) Supervise children during use, cleaning and maintenance. This will ensure that children do not play with the Jobsite radio.

SAFETY WARNINGS FOR BATTERY

a) Do not open the battery. Danger of short-circuiting.
b) Protect the battery against heat, e. g., against continuous intense sunlight, fire, water, and moisture. Danger of explosion.
c) In case of damage and improper use of the battery, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.
d) Use the battery only in conjunction with your Vonroc product. This measure alone protects the battery against dangerous overload.
e) The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit can occur and the battery can burn, smoke, explode or overheat.

SAFETYWARNINGSFORCHARGER

Intended use

Charge only CD801AA and CD803AA type rechargeable Battery packs with the charger. Other types of batteries may burst causing personal injury and damage.

a) The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
b) Children being supervised not to play with the appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in the well ventilated area!

Electrical safety

Always check that the voltage of the power supply corresponds to the voltage on the rating plate.

• Do not use the machine if the mains cable or the mains plug is damaged.
• Only use extension cables that are suitable for the power rating of the machine with a minimum thickness of 1.5mm^2 . If you use an extension cable reel, always fully unroll the cable.

2.MACHINEINFORMATION

Intended use

The jobsite radio is intended to be used as FMradio, as a Bluetooth® speaker and may also be used for charging mobile devices by using the USB power output port. The jobsite radio is powered by a 20V battery.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for different sets / article numbers. Check the corresponding article number in below specifications table for the correct composition and contents of your set.

Model No.	Batteries included	Chargers included
JR501DC	-	-
S_JR501DC	CD801AA CD802AA

Machine information
Voltage 20V	---
FM Frequency range 87.5 - 108MHz
Speaker output 2 x 15W
USB power output 5V / 2.1A max.
USB port 2.0

Model No. CD801AA
Battery Type Lithium-Ion
Voltage	20V-
Capacity	2.0 Ah
Recommended charger	CD802AA
Weight	0.3 kg

Model No. CD802AA
Charger input	220-240V, 50Hz 0.4A
Charger output	21V=2.5A
Charging time 2Ah battery	60 minutes
Charging time 4Ah battery	120 minutes
Recommended batteries	CD801AA, CD803AA
Weight	0.36 kg

Only use the following batteries of the VONROC VPOWER 20V battery platform. Using any other batteries could cause serious injury or damage the tool.

CD801AA 20V, 2Ah Lithium-Ion

CD803AA 20V,4Ah Lithium-Ion

The following charger of the can be used to charge these batteries.

CD802AA Quick charger

The batteries of the VONROC VPOWER 20V battery platform are interchangeable with all the VONROC VPOWER 20V battery platform tools.

DESCRIPTION

The numbers in the text refer to the diagrams on pages 2-4.

1. Speaker
2. Handle and mobile device stand
3. USB port
4. Battery
5. Battery unlock button
6. LED display

a. Bluetooth

b. FM

c. Battery indication
d. Pre-set number
e. Frequency radio station

1. Power button
   8.Mode button
2. Bluetooth (de)connect button
3. Pre-set hold button
4. 1-6 pre-set choice button
5. Play/pause button
6. Volume button "+"
7. Volume button "--"
8. Search button “>”
9. Search button <
   17.Antenna

18.Antennatip

1. USB port cover
2. Battery LED indicators button
3. Battery LED indicators
   22.Charger
4. Charger LED indicators

3.ASSEMBLY

The battery must be charged before first use.

Inserting the battery into the machine (Fig. B)

Ensure that the exterior of the battery is clean and dry before connecting to the charger or machine.

1. Insert the battery (4) into the base of the machine as shown in Fig. B.
2. Push the battery further down until it clicks into place.

Removing the battery from the machine (Fig. B)

1. Push the battery unlock button (5).
2. Pull the battery out of the machine like shown in Fig.B.

Checking the battery charging status (Fig. F)

• To check the battery charge status, push the button (20) on battery shortly.
  The battery has 3 lights indicating the charge level, the more lights that burn, the more charge the battery has left.
• When the lights are not burning it means the battery is empty and must be charged immediately.

Charging the battery with the charger (Fig. F)

1. Take the battery (4) from the machine.
2. Turn the battery (4) to upside down position and slide it onto the charger (22) as shown in Fig. F.
3. Push the battery until it is fully pushed into the slot.
4. Plug the charger plug into an electrical outlet and wait for a while. The LED indicators on the charger (23) will lighten up and show the charger status.

Red LED Status	Green LED status	Charger status
Off Off No power
Off On		Standby mode: - No battery is inserted or, - Battery inserted but charging has finished
On Off		Battery charging in progress

Fully charging the 2Ah battery may take up to 60 minutes.
Fully charging the 4Ah battery may take up to 120 minutes.

After the battery is fully charged remove the charger plug from the outlet and remove the battery from the charger.

When the machine is not being used over a longer period of time it is best to store the battery in charged condition.

Setting the antenna (Fig. C)

• Point the antenna upwards.
  Take the tip (18) and pull it out to a total length of 30cm , there are 5 sections.
• Point the antenna (17) toward the direction that enables the best reception.

Tip! When the reception is insufficient, position the radio at a different location that enables better reception.

4.OPERATION

Place the product on an even surface to prevent falling.

Turn on/ turn off (Fig. D)

• Hold the power button (7) for a few seconds to turn on the radio. Until you hear "power on".
• Hold the power button (7) for a few seconds to turn off the radio. Until you hear "power off".

Adjusting volume (Fig. D)

• Increase volume: press "+" button (13).
• Decrease volume: press " -" button (14).

Choose audio source: FM-Radio or Bluetooth streaming (Fig. D-E)

• Press the Mode button (8) to switch between FM mode or Bluetooth mode.
• You will hear the mode selected and it will show on the display, Bluetooth symbol (6A) or FM symbol (6B).

FM-Radio mode - Searching for station (Fig. D)

Hold the >^ button (15) for a few seconds and the radio will search for the first available radio station (higher frequency). For lower frequencies use the < ^ " button (16).

Manually changing frequency (Fig. D-E)

Press the >^ or < ^ " button (15, 16) until you reach the correct frequency.

FM-Radio storing stations (Fig. D-E)

Easily switch between your favorite radio stations by using the pre-set 1 to 6. For this example we are going to pre-set one station as pre-set number 3.

• Press button "1-6" (11) until 3 (6D) shows on the display (6) like shown in figure D.
• Search for your favorite radio station by using the search buttons (15, 16). FM frequency (6E) will show in display (6).
• Hold the pre-set button (10) to save this frequency as pre-set number 3, the number 3 will appear again on display (6D).

Bluetooth mode (Fig. D-F)

Connect for first time

• Press the mode button (8) until you are in Bluetooth mode.
• Turn on the Bluetooth on your mobile device.
• Scan for "VONROC Radio" on your mobile device.
• Connect it to the radio. You will hear "connected" and the Bluetooth symbol on the radio will stop blinking.

Disconnect/Reconnecting

• Press the Bluetooth button (9) on the radio to disconnect or unable the Bluetooth on your mobile device. You will hear "disconnected" and the Bluetooth symbol on the radio will start blinking again.

• To reconnect make sure the Bluetooth on your mobile device is turned on and press the Bluetooth button (9). You will hear "connected" and the Bluetooth symbol on the radio will stop blinking.

When the radio is connected to the mobile device you can control the volume either on the radio (by using "+" or "-buttons) or by mobile device. You can also skip or go back a song by using the radio (buttons < "or > ) or by mobile device. Use the play/pause button (12) to play or pause your song.

USB charging

• Insert a USB charging cable (not included) to the USB port (3) on the back side of the radio and the other end to your mobile device.

USB port can only be used for charging mobile devices, it will not work as an MP3 player. After use close the USB port cover (19) to prevent dust or dirt to clock up the USB port.

Battery level

The battery symbol (6C) on the display (6) shows the battery level of the battery.

Handle and mobile device stand

The radio should be transported using the handle (2). The handle has a recess which can be used to hold the mobile phone while in use.

WARNING: A mobile phone cannot be secured in the recess/handle and can fall if the radio is moved or transported. Be sure to remove mobile phone from the recess/handle before moving or transporting the radio.

The hole in the handle can be use for the charger cable to fit inside the mobile device while standing in the recess/handle.

5MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the battery pack from the machine.

Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this guarantee:

• Repairs and or alterations have been made or attempted to the machine by unauthorized service centers.
  Normal wear and tear.
• The tool has been abused, misused or improperly maintained.
  Non-original spare parts have been used.

This constitutes the sole warranty made by company either expressed or implied. There are no other warranties expressed or implied which extend beyond the face thereof, herein, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealers remedies shall be limited to repair or replacement of nonconforming units or parts.

The product and the user manual are subject to change. Specifications can be changed without further notice.

• The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such marks by VONROC® is under license.

VEILIGHEIDSWAARSCHUWINGEN VOOR DE ACCU

CD803AA 20V,4Ah Lithium-ion

CD803AA 20V,4Ah Lithium-Ion

CD803AA 20V,4Ah Lithium-Ion

FM-radio-tilstand - Sogning after station (fig. D)

CD803AA 20V,4Ah Litiu-lon

CD803AA 20V,4Ahltium-ion

CD803AA 20V,4Ah lithium-ionovy

DECLARATION OF CONFORMITY JR501DC /S_JR501DC

(EN) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:
(DE) Der Hersteller erklart eigenverantwortlich, dass这点 Produkt der Direktive 2011/65/EU des Europäischen Parliaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht und den folgenden Standards und Vorschriften entspricht:
(NL) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:
(FR) Nous déclarons, sous notre propre responsabilité, que ce produit est conforme à la Directive 2011/65/UE du Parlement et du Conseil Européens du 8 Juin relative à la limitation de l'utilisation de certaines substances dangereuses dans les équipements ELECTriques et Electroniques et qu'il est conforme aux normes et règlements suivants :
(ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto es conforme a la Directiva 2011/65/UE del Parlamento Europeo y del Consejo, de 8 de junio, sobre restricciones a la utilizacion de determinadas sustancias peligrosas en aparatos electricos y electronicos, y que es conforme y se ajusta a las siguientes normas y directivas:
(IT) VONROC dichiara, sotto la sua sola responsabilità, che questo prodotto è conforme alla Direttiva 2011/65/UE del Parlamento europeo e del Consiglio dell'8 giugno, relativa alla limitazione d'uso di determinate sostanze pericolose e apparecchiature elettriche ed elettroniche, ed è conforme alle norme e ai regolamenti seguenti:
(SV) Vi försakrar under värt eget ansvar attenna produit overensstämmer med Europaparlamentets och rädets direktiv 2011/65/EU av den 8 Juni om begränsning av användningen av vissa farlga amnen i elektrisk och elektronisk utrusting och ar i overensstammelse och enlighemed foljande standarder och foreskrifter:

(DA) Vi erklærer under eget ansvar, at dette produit er i overensstemmelse med Europa-Parlamentets og Rådets direktiv 2011/65/EU af 8. Juni om begraensning af brugen af visse farlige stoffer i elektrisk og elektronisk udstyr og overholder og er i overensstemmelse med følgende standarder og regler:
(PL) Oświadczamy na wlasną wymićzna odpowiedzialnosć, ze ten produkt jest zgodny z dyrektywa 2011/65/UE Parlamentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie agraniczenia stosowania niedtórch niebezpiecznychsubstancji w sprȩcie elektrycznym i elektronicznym oraz nastepujacymi normami i przypisami:
(RO) Declaram sub responsabilitatea exclusiva cã acest produs este in conformitate cu Diretiva 2011/65/UE a Parlamentului sia Consiliului European din 8 iunie privind restric tionarea utilisazii anumitor substante periculoase in echipamentele electrice silelectronice sIn conformitate cu urmatoarele standarde s reglementari:
(PT) Declaramos, sob)nossa exclusiva responsabilitadede,que este produits estem conformidade com a directiva 2011/65/UE do Parliamento Europeu e com a do conselho de 8 de Junho sobre a restricao dautilização de determinadas substancias perigosas em equipamento eletrico e electrónico está em conformidade e de acordo com as seguintes normas e regulamentações:
(HU) Kizárolagos felelosségunk tudatāban kijelentjuk, hogy ez a termek megfelel az Europai Parliamentnek és a Tanácsnak az egyes veszelyes anyagok elektramos és elektronikus berendezesekben való alkalmazásanak korlátozásaról szólo 2011/65/EU irányelvenek (2011. junius 8.), valamint a követkežo szabványoknak és jogszabályoknak:
(CS) Prohlasujeme na svou vyhradni odpovednost, ze tento vyrobek splnju pezadavky smernice 2011/65/EU Evropske rady a parlamentu ze dne 8. cervna, ktera se tyká omezeni použivani urcitych nebezpechnych latek v elektrickych a elektronickych zaizenich, a splnju teksechny pezadavky nasledujicich norem a prdepis:

EN55014-1, EN55014-2, EN 62841-1, EN 62841-2-11, EN61000-3-2, EN61000-3-3, 2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU

Zwolle, 01-06-2022 H.G.FRosberg
CEO

VONROC - Lingenstraat 6 - 8028 PM Zwolle - The Netherlands

VONROC

BUILD YOUR FUTURE

©2022 VONROC

WWW.VONROC.COM

2206-22