AGM1096P - Grinder Ferm - Free user manual and instructions

Technical Features	Electric garden shredder, power 2400 W, shredding capacity up to 40 mm diameter.
Usage	Ideal for shredding branches, leaves, and garden waste, outdoor use.
Maintenance and Repair	Regularly check the blades, clean the collection container after each use.
Safety	Equipped with a safety switch, wear gloves when handling waste.
General Information	Device weight: 22 kg, 2-year warranty, dimensions: 70 x 50 x 100 cm.

Frequently Asked Questions - AGM1096P Ferm

How do I start the Ferm AGM1096P shredder?

To start the shredder, plug it into an electrical outlet, ensure the safety cover is properly closed, then press the start button.

What should I do if the shredder does not work?

Check if the device is properly plugged in, if the fuse is not blown, and if the safety cover is in place.

What type of materials can I shred with the Ferm AGM1096P?

You can shred garden waste such as branches, leaves, and small trunks, but avoid hard materials like stones or metals.

How do I maintain my Ferm AGM1096P shredder?

It is recommended to clean the shredder after each use, regularly check the blades, and ensure there are no debris blocking the mechanism.

The shredder makes a strange noise, what should I do?

If you hear an unusual noise, immediately turn off the device and check for obstructions or damaged blades.

How do I sharpen the shredder blades?

To sharpen the blades, remove them from the device according to the user manual and use a suitable grinder or file to sharpen the edges.

What is the capacity of the Ferm AGM1096P collection bin?

The collection bin has a capacity of 50 liters, allowing you to shred a large amount of waste before needing to empty it.

Can the shredder be used in wet weather?

It is recommended not to use the shredder in wet weather to avoid any risk of electrocution or device damage.

Where can I find spare parts for the Ferm AGM1096P?

Spare parts can be ordered directly from the manufacturer or authorized dealers.

What is the product warranty?

The Ferm AGM1096P is generally covered by a 2-year warranty, but it is advised to check the specific conditions in the user manual.

USER MANUAL AGM1096P Ferm

Thank you for buying this FERM product. By doing so you now have an excellent product, delivered by one of Europe's leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety

warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.

The following symbols are used in the user manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-observation of the instructions in this manual.

Risk of electric shock

Immediately remove the mains plug from the mains if the mains cable becomes damaged and during cleaning and maintenance.

Risk of flying objects. Keep bystanders away from the work area.

Always wear eye protection!

Wear hearing protection.

Wear safety gloves.

Do not press the spindle lock button while the motor is running.

Risk of fire.

Do not dispose of the product in unsuitable containers.

The product is in accordance with the applicable safety standards in the European directives.

SafetyWarnings Common for Grinding or Abrasive Cutting-Off Operations:

a) This power tool is intended to function as a grinder tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
b) Operations such as sanding, wire brushing, polishing are not recommended to be performed with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury.
c) Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.
e) The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.

f) Threaded mounting of accessories must match the grinder spindle thread. For accessories mounted by flanges, the arbour hole of the accessory must fit the locating diameter of the flange. Accessories that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.
g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect for damage or install an undamaged accessory. After inspecting and installing an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute. Damaged accessories will normally break apart during this test time.
h) Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.
j) Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool

live" and could give the operator an electric shock.

k) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.
I) Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control.
m) Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body.
n) Regularly clean the power tool's air vents. The motor's fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.
o) Do not operate the power tool near flammable materials. Sparks could ignite these materials.
p) Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

Kickback and RelatedWarnings

Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in the direction opposite of the accessory's rotation at the point of the binding.

For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out. The wheel may either jump toward or away from the operator, depending on direction of the wheel's movement at the point of pinching. Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.

a) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken.
b) Never place your hand near the rotating accessory. Accessory may kickback over your hand.
c) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the wheel's movement at the point of snagging.
d) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control.

SafetyWarnings Specific for Grinding and Abrasive Cutting-Off Operations:

a) Use only wheel types that are recommended for your power tool and the specific guard designed for the selected wheel. Wheels for which the power tool was not designed cannot be adequately guarded and are unsafe.
b) The grinding surface of centre depressed wheels must be mounted below the plane of the guard lip. An improperly mounted wheel that projects through the plane of the guard lip cannot be adequately protected.
c) The guard must be securely attached to the power tool and positioned for maximum safety, so the least amount of wheel is exposed towards the operator. The guard helps to protect the operator from broken wheel fragments, accidental contact with wheel and sparks that could ignite clothing.

d) Wheels must be used only for recommended applications. For example: do not grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter.
e) Always use undamaged wheel flanges that are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges.
f) Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not suitable for the higher speed of a smaller tool and may burst.

Additional SafetyWarnings Specific for Abrasive Cutting-Off Operations:

Cut-off operations are only suitable with a special protection guard (not included)

a) Do not "jam" the cut-off wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.
b) Do not position your body in line with and behind the rotating wheel. When the wheel, at the point of operation, is moving away from your body, the possible kickback may propel the spinning wheel and the power tool directly at you.
c) When wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop. Never attempt to remove the cut-off wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheel binding.

d) Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully re-enter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.
e) Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.
f) Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.

Electrical safety

When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed safety instructions.

Always check that the voltage of the power supply corresponds to the voltage on the rating plate label.

Class II machine - Double insulation - You don't need any earthed plug.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

2. MACHINE INFORMATION

Intended use

Your angle grinder has been designed for grinding masonry and steel materials without the use of water. For cutting, a special protection guard must be used (not included)

Technical specifications

	AGM1096P
Mains voltage 220-240 V~
Mains frequency 50 Hz
Power input 1400W
Rated speed 10.500 /min
Wheel disc for grinding
Diameter 125 mm
Bore 22.2 mm
Thickness 6 mm
Wheel disc for cutting
Diameter 125 mm
Bore 22.2 mm
Thickness 3 mm
Spindle thread M14
Weight 3.9 kg
Sound pressure (LPW)	88 + 3 dB(A)
Acoustic power (LWA)	99 + 3 dB(A)
Vibration "Surface grinding" ah,Ag	5.62 + 1.5 m/s2

Vibration level

The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned

• using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns.

Description

The numbers in the text refer to the diagrams on pages 2-3

Fig. A

1. Spindle lock button
2. Allen screw
3. Protection guard
4. On/Off switch
5. Side handle connection point
6. Side handle

Fig. B

1. Spindle
2. Mounting flange
3. Wheel disc (not included)
4. Clamping nut
5. Spanner

Fig.C1&C2

Protection guard for grinding

Assembly

Before assembly, always switch off the machine and remove the mains plug from the mains.

Assembling the protection guard (Fig. C)

• Place the machine on a table with the spindle (8) facing upwards.
• Place the protection guard (3) over the machine head as shown in Fig. C making sure the ridges on the protection guard fall into the notches of the machine head.
• Turn the protection guard counter clockwise and secure the guard by tightening the screw (14).

Never attempt to remove the guard.

Mounting and removing the disc (Fig. B)

Always use suitable wheel disc for this machine with diameter 0125mm and a bore from 22.2mm the thickness of the wheel disc should be 6mm for wheel disc for grinding and 3mm for wheel disc for cutting, the mounting wheel disc may not touch the safety guard.

Mounting

• Place the machine on a table with the protection guard (3) facing upwards.
• Mount the flange (9) onto the spindle (8).
• Place the wheel disc (10) onto the spindle (8).
• Keep the spindle lock button (1) pressed and firmly tighten the clamping nut (11) onto the spindle (8) by using the spanner (12).

Removing

• Place the machine on a table with the protection guard (3) facing upwards.
• Keep the spindle lock button (1) pressed and loosen the clamping nut (11) using the spanner (12).
• Remove the wheel disc (10) from the spindle (8).
• Keep the spindle lock button (1) pressed and firmly tighten the clamping nut (11) using the spanner (12).

Mounting the side handle (Fig. A and B)

• The side handle (7) can be screwed into one of the three side handle connection point (6).

3. OPERATING

Make sure that the work piece is properly supported or fixed and keep the supply cord routing away from the work area.

Switching on and off (Fig. A)

• To switch the machine on, keep the lock-off button (17) pressed and then press the On/off switch (5).
• To switch the machine off, release the On/off switch (5).

Hold the machine away from the work piece when turning it on and off because the wheel disc could damage the work piece.

• Clamp the work piece firmly or use another method to ensure that it cannot move while working.
• Check the discs regularly. Worn wheel discs have a negative effect on the machine's efficiency. Change to a new wheel disc in good time.
  Always first turn the machine off after use before removing the plug from the socket.

Deburring (Fig. E)

An angle of inclination of 30^ to 40^ will give the best results when deburring. Move the machine back and forth using light pressure. This will prevent the work piece from discolouring or becoming too hot and will avoid making groves.

Never use abrasive cutting discs for deburring work!

Cutting (Fig. F)

For cutting, a special closed protection guard must be used (not included).
Maintain firm contact with the work piece to prevent vibration and do not tilt or apply pressure and when cutting. Use moderate pressure when working, appropriate to the material that is being worked on. Do not slow down wheel discs by applying sideways counter pressure. The direction in which you want to cut is important. The machine must always work against the direction of the cut; so never move the machine in the other direction! There is the risk that the machine will catch in the cut causing kickback and that you will lose control.

Hints for optimum use

• Clamp the work piece. Use a clamping device for small work pieces.
• Hold the machine with both hands.
• Switch on the machine.
• Wait until the machine has reached full speed.
• Place the wheel disc on the work piece.
• Slowly move the machine along the work piece, firmly pressing the wheel disc against the work piece.
• Do not apply too much pressure on the machine. Let the machine do the work.
• Switch off the machine and wait for the machine to come to a complete standstill before putting the machine down.

4. MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.

Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.

Replace power cords

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARRANTY

The warranty conditions can be found on the separately enclosed warranty card.

ENVIRONMENT

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

The product and the user manual are subject to change. Specifications can be changed without further notice.

Winkelschleifer AGM1096P 1400W 125MM

Specifications techniques

AGM1096P

y las instruciones adjuntas. Si no respeta las advertencias de seguridad y las instructaciones,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO,SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO, SEO

2. INFORMACE O NARADI

Urcené pouziti

Vase uhlova bruska je urcena pro brouseni stavebnich a ocelovych materialu bez pouziti vody. Provadite-li rezani, musite pouzit specialni ochranny kryt (neni dodavan)

Technické udaje

2. INFORMATICCU PRIVIRE LA MASINA

1. INHCTPYKUNI NO TEXHNIKE 6E3ONACHOCTN

OCTOPOXHO

BHHMaTeIbHo npOuTnte npEduPexKeHn o co6JIODeHn

TexHnKb 6e3oNaChOCTn,doONHHTeJIbHbIe
IpeDynpexDeHnro OcoBIOJeHn texHnKn
6e3oNaChOcTn n HNcTpkyCnIO. HecobIOJeHne
IpeDynpexDeHnro OcoBIOJeHn texHnKn
6e3oNaChOcTn n HNcTpkyCm MOKeT npVBecTn
KnopaxHeHIO 3NeKtpNUeCKm TOkOM,poXapy
n/nn CepBe3HbIM TpaBMam.CoxpaHnte
IpeDynpexDeHnro OcoBIOJeHn texHnKn
6e3oNaChOcTn n HNcTpkyCmIO dJa
DaJIbHeIwero NcNoJIb3OBaHHa.

PnBBeHHe HxKe 3HaKn NcNoJb3yIOTcB DaHHOM pyKOBoDCTBe nn Ha npOdyKTe:

Ppoumme pykooeodcmgo nolb3oameen.

Yka3b1Baem Ha puck noepekdeHua uncmpyMeHa,mpaem unu cmemu 8 cnyuae hecobnOdeHua uncmpyKuu npueedeHHbx e daHOM pykoedcmne noB306amEn.

Onachocmb npaxeHua 3neKmpueeckum mOKOM

B cnyae noepexdeHua Ka6nnaumanu, a makke 8o epem ouucmku umexhuecko2o o6cnykueaHua Ka6nb numahura Heo6xodumo omKnIOuymb om po3emku.

OnachocmbIemraux ockonko6.
N3beaume npucymcmeu
nocmopohhux habnodameneu 8 30he npoeedeHua pa6om.

Bce2da uonb3yume 3aumHbIe O4ku!

IcnoJb3yume cpecdmea 3auumbl om uyma.

Icnonb3yume 3aumHbIe nepuamku.

He haxumaune Ha KhoNky 6nokupoeku uunhdene 80 epempa6ombl 3neKmpomomopa.

Onachocmb nokapa.

BbI6paCbeaUme u3dene moIbKO e npedHa3NaYeHHbIe dner 3mo20 KOHMeuHepbl.

JaHoe u3dene coombeemcmeyem npumehmbim cmahdapmam 6e0nacchcmu eeponeueckux dupekmue.

O6uhe npedynpexdHnna 0 c6IIOJeHHn TeXHKn 6e3oNaChocTH BO BpeMaOn IPO 3aTaUHaHNIO NII OTpE3aHIO C NcNoJIb3OBaHHeM a6pa3NBbIX MaTePnaJIOB:

a)ДанньиэкгponHctpymeHT npednoIaraeTcNcNoIb3OBaTbB KaueCTBe ⅢnfoBaJIbHOm MaunHb.I. IpOHTnte BCE npedynpexKdEHH NO 6e3OpacHOMy NCNOJb3OBaHHIO N O3HaKOMbTEcB c pncyHKam n CneuΦnKaUaMn, KOTOpbl epnlaraiOTcN DaHOMy 3NeKTponHcTpymeHTy.Heco6nIoDeHHe npINBeDeHHbIX HIXe INHcTpyKcIM MoXeT npINBeCTN K nopaxeHHIO 3NeKTpUeCKIM TOKOM,poKapuy n/InCepbe3HbIM TpaBMam.

b) He pekomehyeteNcNoB3OBAt b daHHbI 3NeKTPoHnHCTpyMeHT dJa TaKnx Oepaun, KaK WJInΦOBKa, OuncTka nPoBOIoHOn ⅢeTKo N pOnpOBKa. BbINOHeHne Oepaun, dJa KOTOpbIX 3NeKTPoHnHCTpyMeHT

He npedHa3HaueH, MoKeT npedCTaBnTb ONaCHOCTb IN pNBecTn K cepbe3HbIM TpaBMam.

c) 3anpeaaetcnaONb3oBaTb npHaJnEJXHO, KOToPbIe He 6bln cneuaHbHO pa3pa6OtaHbI n 3apeKOMeHDoBAHb I pOn3BOdnteJeM HCTpyMeHTa. DaKe ecnn npHaJnEJXHOCTb MOKeT 6bltbpNKpEnHeKa 3JIeKTPOINHCTpyMeHTy, 3TO He O3Haayet, 4TO ee NCNoJIb3OBaHHe 6e3OnacHo.
d) HOMHaJIbHa cKOpOCTb npHaIeXHOCTn DOJXHa 6bITb paBHa IIN npeBbIaTb MAKcImaJIbHyIO cKOpOCTb, 06O3HaueHHyIO Ha 3JeKTponHcTpymTe. PpHaIeXHOCTn, pa6oTaIOUne CBepx CBOeHOMHaJIbHOI cKOpOCTN, MOrY cIOMaTbcN pa3JIeTeTbcR.
e) BHeuHn DnaMeTp n ToJiHa npHaIeXHoCTn DOJXHbI HaxOHTbcB B ppeJax pa6oJero dana30Ha 3JeKtpOnHcTpymEnTa. PpN cNoJIb3OBaHIn npHaIeXHoCTeH HeBepHoro pa3Mepa HeBO3MOxHO rapaHTnpOBAt b 6e3OpacHOctb N ynpabJraEmocTh pa6Obl.
f) Pe3b6oBoe 3aKpeIJIeHne npINHaJNeXHoCTeI DOJXHO COOTBETCTBOBaTb pe3b6e WnIHdEJIa IINΦMaunHbI.ДЯ npINHaJNeXHoCTeI, KOtOpBle KpeIaTcra HaФlaHaux, OTBepCTne npINHaJNeXHoCTN DOJXHO COBNaDaTb C dIaMeTpOMФaHua. pINHaJNeXHoCTn, KOtOpBle He COOTBETCTByOT 3JIeMeHTaM KpeIJIeHna 3JIeKTPoIHnHCTpyMeHTa, pINBeyT K DInC6aJIaHcy, NOBbIWeHHbIM Bn6paUmaM MmOryT npINBeCTN K Notepe ynpaBHeHna.
g) 3anpeueHo nCnoJb3OBA Tb NOBpeXdeHHbIe npHnAdLeXHocTn! Npeed kaKdbIM nCNoJb3OBAHHeM npOBepRyTe npHnAdLeXHocTn, TAKne Ka6pa3NBbIe DNCKN, Ha npEdMeT CKoON B n TpeuH, DNCKN- NOoBbI Ha npEdMeT TpeuH, pa3pbIBOB, H3JIuHHeRo N3HOca, npOBOnOuHbIe 5eTKn Ha npEdMeT Ocna6leHNOHnn cIOMaHHO npOBoNOK. B Cnyae naDeHn EJektpoMHCTpyMeHTa NII npHnAdLeXHocTn, npOBepbTe IHCTpyMeHT n pInHaadLeXHocTb Ha npEdMeT NOBpeXdeHn NII yCTaHOBNTe HOByIO npHnAdLeXHocTb. PocNe

npoBepKn yctaHObKn npHnAdJeXHoCTn
pacnoJIOXNTecb TaKIM O6pa3OM, YTO6bl Ha
IIOCKOCTn BpaueHn npHaJNeXHoCTn
He HaxoDInncb IIOu, 3aTeM 3aNyCTnte
3JIeKTPoHHCTpyMeHT Ha MaKcImaJIbHO
CKOpocTb 6e3 Harpy3Kn n IO3BOJbTe
INCTpyMeHTy pa6oTaTb B TAKOM pexmme
B TeueHne ODHOH MNHyTb. O6bHuHO 3a 3TO
Bpem NOBpeXdHHbIe npHaJNeXHOCTn
JOMaOTcR.

h) NcnoB3yIe cpeCTBa HNDNBduaJIbHO 3aunTb.I B 3aBnCmOCTn OT npImeHHeH, NcnoB3yIte IuueBOI uTOK, npedoxpaHntEbnHbe OCKn IIN 3aunTHbIE ockn. B 3aBNCMOCn OT cnTuacnn TaKke NcnoB3yIte nbIe3aunTHyo Macky, cpeCTBO 3aunTbI Cnyxa, 3aunTHbIE nepaATKn 3aunTHbI φapTyk, cnoc6HbI OCTaHaBnBaTb MeKne abpa3NBbIe qactnCbI. 3aunTa IJna DOnjXHa IMetb BO3MOxHOCTb OCTaHaBnBaTb pa3NeTaIOUneCe BO Bpempa3NHybIX pa6OuX onepauin OckoJKN. PbIe3aunTHa MaCKa IIN peCnpaTOP dONJHbI IMetb BO3MOxHOCTb fInlbTpauin YactNu, OKa3aBUnXcB BO3DyXe B Xode pa6Oey Oepauin. IpodoJXnTeJIbHbIM Shym BbvICOKo INHTehCNBOCTn MOKe T pINBeCTN K NOBpeKdEHNO I NOtepe Cnyxa.
i) CneInte 3a TeM, YTO6bI NOCTOPOHnHe Ha6JIIOdaTeHn HaxOdINncb Ha 6e3OnacHom pacCToAHn OT 3OHbI NPOBeDeHn pa60r. Bce Iuca, HaxOJaUncsEaB 3OHe npOBeDEHn pa60r, DOJXHBI NCNOJB3OBaTb cpeCTBa INDIBNDAyAIBHOH 3aUHTbl. OckoIKn pa6OvHx MaTePnaIIOB, a TAKKe ockoJIKn pa36bITbIX pInHaJNeKHOCTeM MOrYT BbIeTeTb 3a PpeJeBt pa6Oye 3OHbI N HaHeCTn yBeYbI NOCTOPOHnIM IuCaM.
j) Bo BpemBbInOpHeHH pa6OuHX onepaun, rde cyueCTByeT BO3MOxHocTb cOnpNKOCHOBeHH npHaIeXHOCTn COCKpbIToN 3JIeKTPoPBOJKO Hnn Ka6eJeM NHTAHN H3DeJIy, 3JIeKTPoHnCTpyMeHT Heo6XoHMo DEpxaTb TOnbKO 3a H3OINPOBaHHbIe NOBepXHOCTn pyKoTOK. B cIyuae ecn pexyuee npncnocobJeHne cOnpNKOCHTcC Ka6eJeM nOd TOKOM, MetaIIuueckNe Detanl 3JIeKTPoHnCTpyMeHTa

TaKKe 6yDyT HAXOINTbCn IOI TOKOM, N, KaCcIeIcTBnE, MOrY T Inpa3NtB opeaTopa 3JIeKTpUYeCKM TOKOM.
k) PacnoJoxnTe Ka6eIb noJaIbWe ot BpaauoIeCn npHaadLeXHocTn. B cnyae yTeRn KOHTpOJIa HaD 3JIeKTPOnHCTpyMeHTOM DnCK MoKeT pa3pe3aT npOBoN nIN 3aueHNTbc, NotaHyB pyKy B CTOpOHy BpaauoIeOcR npncnocO6NeHn.
I) He kJaIte 3JIeKTPoHnCtpyMeHT Ha non Do Tex nop, noka npHaJnEJXHOCTb He octaHOBNTcdo KOHca. BpauaIOUaCra npHaJnEJXHOCTb MOKeT 3aueIITbcr 3a NOBepxHOCTb N BblpBaTb 3JIeKTPoHnCtpyMeHT n3 pyK.
m) He HOCHTe 3JIeKTPOHNCTPymENT BO BKNIOUeHOM COCTOHN Ha peMHe INHCTpymENTOB. BpauaouaJc npHaIaNEXHOCTb MOKeT 3aCenITbcra 3a OdExdy I NOTAHyTB 3JIeKTPOHNCTpymENT K Baamemy TeNy.
n) BeHTnIaHNoHHbIe OTBepCTnIa 3JIeKTPoHnHCTpyMeHTa Heo6XoIMOp peryIaRHO uHCTnIb. Bo BpeMra pa60TbIBeHTnIaTOp 3JIeKTPoDnBHaTeJIa BCaCbIBaet nbIbB KOpNc 3JIeKTPoHnHCTpyMeHTa, a N3NIuHHee HaKoPJIeHne IopoUkOBOrO MeTaIIaB N3DeIIN Co3Daet 3JIeKTPuYeckyIO yrpo3y.
o) He nCnoJb3yIte HnCTpyMeHT B6JH3n JERKOBocPnAmEHaUOxxCa MaTePnaNoB. NcKpbI MOrYT pInBecTn K IN X BO3rOpaHHo.
p) He nCnoJb3yIe npHnAdJeXHoCTn,ДЯ KOTOpbIX Heo6xOaIMO XnDkoe OxJaXDeHne. IcNoJIb3OBAHHe BObl NpoQHX OxJaXaUxN XnDkoCTe MoKTe npVBecTn K nopaxEHHIO 3JIeKTPnueckm TOKOM.

Otdaa nCBra3aHHbIe C Hei npdeynpeKdEHN

OTdau-3TOpe3yIbTaT3aCenIeHnI 3aCTpeBaHnBpaAioOeOcreDnCKa, DnCKa-noOWBbl, uETKnNIO6oN dpyroI npHaJnEcxHOcTN.3aCTpeBaHne N3axmAmHe npNbOINTK6bICTpoNocTaHOBKe BpaAioOeChpnpHaJnEckHOcTN,Bpe3yIbTaTe yero NotepaBnU npPaBLeHne 3JeKTPoINHCTpyMeNT BbIPbBAeTCa

BCTOPOHny, npOTNBOJNOJIOKHyU BpaUeHnO
BpauaIoUeIcR npHaJdJIeXHoCTN B MeCTe
CoEiINHeHna.
HaPmEp, ecn a6pa3NBbI dNcK 3aueHNTcra
IIu 6yTeT 3aueMJeH pa6OuH MATEpHaIOM,
KpaI dNcKa, KOtOpbI BXoIT B TOUY 3aKIMa,
MOKeT Bpe3aTbCRA B NOBepXHOCTb MaTEpHaIa,
YTO pInBeDeT K BblpIBaHnIO IIN OTDaYe
3JIeKTPOINHCTpymeHTa. DnCK MOKeT OTnpbIRHyTb
kA B CTOPOHy ONEpAToPA, TAK N OT Hero, B
3aBNCIMOCTH OT HApRaBJIeHnIA DBNXeHnIA DnCKa
B MOMENT 3aUeMJIeHnIA. B TaKnx ycNoBnIX
abpa3NBbIe DnCKI TaKKe MOrYT CnOMaTbcra.
OTdaua - 3TO pe3yIbTat HeBepHoro o6paUeHnIA
JIeKTPOINHCTpymeHTa N/II IN Heco6NIOHeHn
HaDJIeKAsx YcNOBn IIN IpoUeDyp, KOtOpRo
MOxHO N36ExKaTb, ecn ObecneuHT co6NIOHeHne
PiNbEeHHbIX HIXe MEP IpedocTOPOXHOCTN.

a) IpoUHO yIepKINBaIte 3JIeKTpONHCTpyMeHT n pacNoJoxNTE TeNo n pyKy TaKIM o6pa3OM, YTO6bl IMeTb BO3MOXHOCTb IPOTNBOCTOaTb CnIe OTdauN. B cIeJx OBeCneJeHn MaKcImaJIbHOro KOHTpOnJa HAd OTdaYe, a TaKKe BO BpeM peAKTINBHOrO MOMeHTa B XoJe 3aNycka BcerDa NcNoJIb3yITe DOJONHITeJIbHyO pyKoRTky, ecn OHa BXoINT B KOMIINeKT. Ppi Co6JIIOJeHn Heo6xoJIMbIX MEP IpeJoCTOpOKHOCTn ONepaTOP ImeET BO3MOXHOCTb COBJaTaB C peAKTINBHBIM MOMHTOM N OTdaYe.
b) HNKoIa He nOmeuAte pyky B HEnocpeDCTBcHNo 6n30CTn OT Bpaauouei npHaJneKHOCTN. B pe3yIbTaTe OTdau npHaJneKHOCTb MOKeT OTCKOHTB CTOPOHy BaewpyKn.
c) PacnojaraTe CBOe TeJIO TAKIM O6pa3OM, YTO6bI B Cnyuae BO3MOXHOJ OTaUH 3NEKTPoHHCTpymeHT He DBnraJcB CTOpOHy BaWero TeJa. OTdaua OT6pocIT 3NEKTPoHHCTpymeHT B HAnpaBHeHIn, 06paTHOM HAnpaBHeHIn BpaUeHnA DnCKa B MeCTe 3aUeMJIeHnJ.
d) C oc6eHHo octopoxHocTBIO OTHOCHTecb K pa6ote B yrgnx N 6bn3n ocTpbix KpaEB. H36eraIte OTCKOKa N 3aueMneHna npHaJNeXHocT.N. Yrbl, ocTpbie Kpaar INN OTCKOKu qacto pnpBOaT K 3aueJIpeHIO

BpaaoueI npHaJnxHocTn I notepe ynpabneHn HaI 3NeKtpOnHCTpyMeHTOM INN OTdaue.

e) He yctaHaBnBaIte ueHbIe OTpe3HbIe DnCKn NO DepeBy n DnCKOBbIe NJIblc 3y6bMaM. TaKne DnCKu Yacto npNBOJrK OTdAue H yTepe KOHTpOJa NaI eNeKTponHCTpyMeHTOM.

Oco6bIe npedynpeJdeHn o co6JIoDeHn TeXHKn 6e3OnaChOCTN BO BpeM OepaCn IIO 3aTaUHbAHNo NIN OTpe3aHIO C HcPONb3OBaHHem a6pa3NBbIX MaTePnaJIOB:

a) NcnoJb3yIe TOJIbKO Te TINbI DnCKOB, KOtOpBle peKOMeHdyOTcI dIy BaWero 3JIeKTPoHHCTpymEHTa, a TaKKe COBMeCTmblc C HMM 3aunTHbIe cHTKn. NsckN, KOTOpBle He npedHa3NaueHbI dIpy 3JIeKTPoHHCTpymEHTa, He MOryt 6bITb HaJIeXkaUIM o6pa30M 3aUnuEhbl.
b) NOBepxHocTb WnNFOBaHnna WnNFOBaJIbHO Kpyra DoJnxHa HaxoINTbcr NOd NIOCKOCTbU 3aunTHoro UNTka. HeBepHo yCTaHOBJeHHbI Kpyr, KOTOpBI BbIXoINT 3a NIOCKOCTb 3aunTHoro UNTka, He MoKeT 6bITb B DOCTaTOuHO Mepe 3aunuEh.
c) 3aunTHbIN KOxyD0JKeH 6bITb 3akpenneh TAKIM O6pa3OM, YTO6bl HAnMeHBwa JAcTb DnCKa 6blNa HnPaBnEHa B CToPOHy onepaTopa. 3aunTHbIN KOxy 3aunNlaeT onepaTopa OT OCKoIKOB pa3pyWeHHoro DnCKa, HnpeDnHaMepeHHORO KacaHnA NnCKp, KOTOpbIE MOrT NOJKeYb ODeKdy.
d) NsCKn Heo6xOJIMo yCTaHaBnBaTb NCKIIOHTeJIbHO dJaTex ceJe, dJa KOtOpbIX OHN ppeHa3HaueHbI. HanpImep, 3aPpeaaetc JaNFOBaTb TOpceBOI cToPOHOOTpe3HOrO DnCKa. A6pa3NBbIE OTpe3HbIE NsCKn PpeHa3HaueHbI dJa IINFOBaHn nepiΦepnei Kpyra, TOpceBbIe HArpy3Kn Ha 3TN DiNCKn MOry T npVBecTI K IX pa3pyuWeHIO.
e) Bcerda nCnoJb3yIte HenoBpeKdEHHbIe 0laHcbl DnCKOB HaJnxKaUero pa3Mepa n

ΦopMbI DnBb6paHoro DnCK. PpaBnbl-HbIe ΦnaHcbl DNCKOB NOdEpxNBaOT DNCK, Tem cama CHnxKa pNCK pa3pyeHnEA DNCKA. ΦnaHcbl OTpe3HbIX DNCKOB MOrY OTlNHaTbcr OT ΦnaHcB WInFOBaJIbHbIX DNCKOB.

He nCnoJb3yIte n3HoWeHHbIe dNcKn c 3JIeKTPoHnCTpyMeHTOB 6OJIbWero pa3Mepa. NICKN, ppeHa3HaueHHbIe IJIra 3JIeKTPoHnCTpyMeHTOB 6OJIbWero pa3Mepa, He ppeHa3HaueHHbI dJIra O6OpOTOB, ppeDyCMOTpeHHbIX dJIra MaJIbIX 3JIeKTPoHnCTpyMeHTOB, IMORyT pa3pyUHTbcr.

IpeynpejdeHnO c6bIooHn TexHKn 6e30NaChOCTN BO BpeM onepaun No OTpe3aHnO C NCNoJIb3OBaHHem a6pa3NBbIX MaTePnaIOB:

Ompe3HbI pa6ombi moKHO 8blonnmb monbKO npu Hauuu 3auumHo2o Koxyxa (He exodum e KOMnneKmau).

a) He 3aueemnIte n He npmeHnTe n3nnHIOH Harpy3ky Ha dnck. He nbitaTeCb cHNoy yBEnHHTb rny6Hy pe3Kn. N3nnHHe Harpy3Kn yBeInuBaIoT BepoTHOCTb CKpyuBaHH u CxKMaHn DaNcKa B pa3pe3e, YTO yBEnuHaet WaHC OTdaHn pa3pyuHen DaNcKa.
b) He pacnonaraTe TeNo B OndH NoNocKoCTn C BpaauOuMcra DnCKOM. KOrda DNck BO Bpem pa60t b HappaBnaTcra no HnpaBHeHIO OT BAC, Bo3MOxHa 0TDAua HnpaBNT BpaauOuMca DNck N 3JIeKtpOnHCTpyMeHT B Bauy cToPOHy.
c) B cnyuae 3acTpeBaHnna DnCKa n npn npepbIBaHn pe3Kn no KaKIM-Jn6o npuHNAM OTKNIOHTe NITAHne 3NeKTponHCTpyMeHTa n ydePknBAaTe HNCTpyMeHT 6e3 DBNXeHn DO Tex nop, NOKa N3dJIeNne NOJHOCTbI O He OCTaHOBNTc. HNKOrda He nbITaHTecb N3BLeYb DNck N3 pa3pe3a BO BpEM pa60tbl N3dJIInr, 3TO MOKeT npNBecTN K OTDAue. BbIChNTe u YcTpaHnTE npuHnHy 3acTpeBaHnna DnCKa.

d) He BkIIOuAaTe 3JIeKTPoHnHCTpymeHT, noka dNcK haoOHTcB pa3pe3e! DoXJntecb, noka 3JIeKTPoHnHCTpymeHT pa3roHnTcdo NOnHOckopocTH, 3aTeM nonpo6yIte aKKypaTHO NOMEcTb DnCK B pa3pe3.

B cnyuae 3anycka 3neKTPoHnHCTpyMeHTa B pa3pe3e INCK MOKeT 3actpTa, BbICKOHTb N3 pa3pe3a, INN OT6pocNTb INHCTpyMeHT Ha3ad.

e) PanaJIH n npOyne pa6Oyne MaTepeHaJIbI 6oJIbWoRo pa3Mepa Heo6xOdIMO noDcEprKINBaTb, TTo6bl DOBeCTn

BO3MOXHOCTb 3aUeMJIeHnI OTOaHu Do MmHmyma.BoIbIne pa6OuHe MaTePnaIbI Yacto IOMaHTcI NOd CO6CTBeHHbIM BECOM.

Iopdepxnbauuie KOHCTpyKun Heo6xoImO yctanabnbaTb no pa6oum MaTepnanom C obex ctopoH pa3pe3a, a TAKKe IIO KpaM.

f) C oco6oB octopoxhocTBbBbINOJIHnTe onepaunn NO BbIpe3aHnO OTBepCTn.

ДяЗацntы OT Bn6paunnoДерхиBaHTe HNCTpyMeHT IN npHaJTeKHOCTB XOPOwEM COCTOHN, He daBaIte pyKaM Mep3HyTb n OprAHIN3yIte peKIM pa60Tbl.

Onncahne

LInpBbTEKCTe OTHOCaTcK CXeMaM Ha cTpaHncax 2-3

Pnc.A

1.Khonka6noknpovknwnndjeia
2.BuHT CBHyTpEHNM WecTnrgpAHNKOM
3. 3aunTHbIKoKyx (pnc.B)
5. BbiknioateIb
6. MeTo CoeINHeHn 6OKOBpyKoTkn
7.Бokobarpykota

Pnc.B

1. WnHdJIb
2. MoThaXhBbI ΦJaHeu
   10.ДИСК（He BXOДNTВ KOMПЛЕKT）
   11.3axumna raika
3. Kliou

Pnc.C1&C2

3aunThbKOKoyxDnJwJnOboKn

C6opka

Ipeod cboKou bceda omKnlouaume 3neKmpounhcmpymem om 3neKmpounumaHua.

YcTaHOBka 3aunTHoro KOxyxa (Pnc. C)

-Полбinteи3делпеHa ПLOСкую NOBepxHocTb шпнделem（8）Вверх.
- YctaHOBnTe KOxyx (3) Ha peyKTop n3deJnna, KaK 3TO noka3aHo Ha pncyHke C taKIM o6pa3OM, yTo6bI BblcTynbl 3aunTHoro KOxyxa nonaJIb K KaHaBKn peyKTopa.
- YctaHOBNTe 3aIHTbI KOxyxB Heo6xoIIMoe nolokHe, KaK noka3aHo Ha pncyHke D.
3aTAHNTe BnHT C WecTnRpaHHbIM UINuem (2)Ha 3aunTHOM KOxye C NOMOUB KInoua- WecTnRpaHHka (18).
ДяиИЗмЕнгЯ NOLOXЕнгЯ 3aUHTHOROKoxya ocna6bTe BnHT C WecTnRpaHHbIMJINIeM (2), Otperyu npyTe NOLOXeHne N

BHOBb 3aTAHNTe BnHT C NOMOu bKIOUa- WECTINrpaHHNka.

Huko2da He uCnoB3yUme u3denue 6e3 3auumhozo kokyxa.

YcTaHOBka n ChrTne DnCKa (pnc. B)

Длгэтогоиздени седует Испоьзоваты днckи дnametpom 0125 MM c noca doчныдnametpom 22,2 MM n toIuHoiДИСКа 6 MM Длгшлфовии 3 MM ДлгpeЗк.ПрИ StOM dNCK He DoJKeH Kacatbcs 3aunTHoro KoKxya.

YcTaHOBka

• NomeCTnTe n3dEIne Ha IIIOCKyIO NOBepxHOcTb 3aUHTbIM KOxyOM (3) BBepx.
• YctaHOBNTe 9) Ha nnHdJIb (8).
• YctaHOBnTe DNCK (10) Ha ⅢHnHdJIb (8).
• YdepxBaIte KhoNky 6nOKnpOBKn 7nnHdJIe (1) n 3aTaNHe 3axmHyo raiKy (11) Ha 7nnHdJe (8) c nOmoBIO kNIOva (12).

ChyTne

• NomeCTnTe n3dEne Ha pIOCKyIO NOBepxHOcTB 3aUHTbIM KOxyOM (3) BBepx.
• YdepxnBaTe KhoNky 6IOKnpOBKn IINHdJIe (1) n ocna6bTe 3axmHyto raKy (11) c NOMOuKIOUa (12).
• CHINMITE DNCK (10) co ⅢHdJIe8.
• YdepxnBaIe KhoNky 6JOKIpOBKn IINHdJIa (1) n npOHO 3aTaNHe 3aXIMHyu raKy (11) c NOMOsbIO KInOua (12).

YcTaHOBka DOONHHTeNbHOI pyKoAaTKn (pnc. A u B)

-Дононтель hyo pyKoTky (7) moxho BkpyTntb B Ondno n3 Tpex npedHa3HaueHHbIX Дпг STOrO OTBepCTn (6).

3. 3KcPJIyATAUJRA

Y6edumecb, ymo paobouu Mamepuan hadnexaum o6pa3om 3aФukcupoean, a ka6eI npmaHr He MoXem nonacmb nod 3neKmpounhcmpymem.

BkIIOueHne n BBIKIOueHne (pnc. A)

ДяВКЛЮЧЕнЯ 3ЛЕKTponHCTpyMeHTa ydepxkBaIte KHOKNy 6LOKIpOBKn (17) n HaxMnTe BbIKNoCuTeJIb (5).

ДяВьIKIOUeHЯ3JIeKTPoINHCTpymeHTa OTnycTInTe BvIKIOuHaTeIb (5).

Pn BkIoueHnn 3JIeKtpOnHCTpyMeHTa DepXnte ero noJaIbWe ot pa6OeR MoTePnAna, nHaue BpaUoiuNcA DnCK MOKeT ero NOBpeNTb.

Haedexho 3akpeinte pa6oH MaTePnA1 TaKIM o6pa3OM, yTo6bI OH He CDbHJcR BO Bpempa60tbl.
Perynphno npOBepaTe coCToHne DnCKOB. H3HOWeHHbIe DNCK Oka3bIBaIO T HeRaTINBHOE BnHHe Ha 3OΦΦeKTHBHOCTb 3NeKTPoHNCTpyMeHTa. 3a6NaROpBpeMeHHo 3aMeHnTe N3HOWeHHbIe DNCK HA HOBbIe.
-Перетд n3BileeHem BnIKN эл ektpoIHcTpymeHTa n3 po3eTKN BCerda oTKIOUaIte əLektpoIHcTpymeHT.

YdaJIeHne 3ayceHueB (pnc. E)

Pn yanaenHn 3ayceHueB yron haknoha B 30- 40^ npedeocTabnre HauyUwne pe3ynbTaBl.

IpeeBnraIte 3JIeKTPoHnCTpymEnT BnepeNHa3aI, npImeHЯ He6OJbUoe DaBHeHne.

Takim o6pa3om, pa6oyn MaTePnAn He 6yDet nepeperpeBaTbcra n He 6ydyT o6pa3OaHbI KaHaBKn.

He uonb3yme abpaueHbe duku dny yadeneu 3ayceHuee!

Pe3ka (pnc.F)

Дяpe3KN HeIb3N IcNoIb3OBaTb OcO6bI 3aKpbIbI 3aUHTbI KOKyX (He BXoIIT B KOMnJIeKTaunHO).

YTo6bI yMeHbWHTb Bn6paCUNo, npnxMaJTe 3NeKTPoHnHCTpyMeHT K pa6Ooyemy MaTePnAly. He HAKNoHnTe n He HAKMaJTe Ha 3NeKTPoHnHCTpyMeHT BO BpeMn pe3Kn.

Icnoj3yntpe npabnibhoe daBneHne B 3aBncmoctn ot paoboyero Maepnana. He 3aMeJTe CKOpocb BpaueHn DaCKOB nyTem npimHeHH6OKOBOr DaBHeHH.

HanpaBJIeHne pe3KN IMeET BaXHOe 3HaueHHe.

3NeKtpoHnCTpyMeHT Bcerda DoJxKeH pa60TaTb npOTNB HnnpaBHeHnaP3e3a. HnKOrDa He nepemeuaTe 3NeKtpoHnCTpyMeHT B DpyROM HnnpaBHeHn! B npOTNBOM Cnyae CyuEcTByET pNCK 3axmma DNcKa, YTO npNBEdT K OTdAue n NToTepe KOHTpOJa HaI N3DeJIeM.

COBebI DnONTHMaJIbHOrO NcNoJIb3OBaHHN

3akpenIte pa6oH MaTePnA.IJMaJIbIX pa6OuX MaTePnaIOB nCNoJIb3yIte TnCKN.
- YdeprKnBaIe 3JIeKTPoINHCTpyMeHT o6eIMn pyKaMn.
BknHouHTe 3neKtpOnHcTpymEnT.
-Дождntecb,пoka злелктуонстумент наберет поньie obopoтbl.
-ПомecтnteДИСКHa pa6ochn MaTePnAJI.
- PnixMnte DnCK K pa6oemy MaTePnaIy n MeJleHNO nepemeuaTe DnCK No erO NOBepxHOCTN.
He haxmaite cnilkom cnIbHO.Pa60Ty DOJXeH BbINOJIHrTb INCTpyMeHT, a He Bbl.
- Ipeed Tem kak noIoxnTb 3JIeKTPoHnHCTpyMeHT noIOxNtTe, NOKa OH nOINHOCTbH OCTaHOBNTcNOCNE BblKnIOUeyHn.

4. OBCJIYJXNBAHNE

Ipeod ouucmou u obcnykueaHuem
ece2da omkniouaime
3neKmpounhcmpymem om
3neKmponumaHua.

Perynapno ouuau Te Kopnyc
JNeKTPoHnCTpymeHTa MrgkOu TprnKO,
XeNaTeNbHO, NocLe KaXDoRo IcNoIb3OBaHn.
Y6eDntEcB, YTO BeHTnIaUIOHbIe OTBepCTNIACTBIOTNbIINrpa3N.IyraJeHnOco60
CInbHbIX 3aRpa3HeHn IcNoIb3yIte MrgKyIO
TpyNKcCMblbHOnpeHn. He IcNoIb3yIte
pactBopnteJI, TaKne KAKBeH3IN, CnIPT,
AMMaK IN.T.D. XmMueckne BSeIecTBA NOBpeJIT
CNHTeTuYeCKNE KOMnOHeHTbl.

3aMeHa Ka6eIy NITaHn

B cnyuae nobpekdeHnKa6eJnntaHn erO Heo6xOdIMO 3aMeHnTb y npOn3BoDnTeJIa, areHTa nO o6cnyKuBaHnIO nnI nnI, mHeoUnx COOTBeTCTByOuSyIO KBaIINΦnKauHIO.

TAPAHTN

TapaHTnHbIe ycIOBnI npIBeJeHbI Ha OTdJIbHOM rapaHTnHOM NICTe.

OKPYXKAIOUCAI CPEDA

HeucnpaHbIe 3neKmpuueckue u 3neKmpoHHbIe u3deJnra Heobxodmo cdaamb e coomeemcmeyouue nyHKmbi ymunuauu.

TolbkoДЯСТРАЕВрoneckoro 3KOHOMNueckoro coo6uecCTBa

He Bb6paBbIaIe 3JIeKTPoHnHCTpyMeHTbI B
06bIHyIe MycOpHbIe KOp3INbI. B COOTBeTCTBnC EbponeckOu DnpEKTbBo2012/19/EU o6
yTNlN3aUu OTpA6OtaHHOrO 3JIeKTPuYeCKoro N
3JIeKTPoHHOrO 6OpUpoBaHnI Ie peaIn3aUu
B TocydapCTBeHHOM 3aKOHODaTeJbCTBe
3JIeKTPoHHCTpyMeHTbI, KOToPbIe 6OJbIe He MOryt
HCNoIb3OBaTbcr ON Ha3HaueHnIO Heo6xOdmo
IODbepraTb yTNlN3aUu DpyKeCTBeHHbIM NO
OTHOseHIO K OkpyKaIoUe CpeDe CnOCoBOM.

B n3dene npykoBODCTBO noJb3OBaTeJI MOryt 6bITb BHeceHbl N3MeHeHH. CneuNkauMn MOryt 6bITb N3MeHeHbI 6e3 npedBaPntbHoro onObeueHH.

ΓΩNIAKOΣ TPOXOΣ AGM1096P 1400W 125MM

Euxapiotoupe Tou ayopaoate auto to Tpoiov Ferm. Etoi atoktnaote eva eiaipetik oTpoiov, Tou napaodietai ano evav anto touk opuaiouc Tpoountheutc otny Eupwn. Ola ta Tpoiovta Tou aac npadibovtai ano tn Ferm eivai kataaekuaoepva ouwva me ta auotnpotepa Tpotaatnoockai aoapaleiac. cepoc tnc pilooqiaac mac, Tapexoue etionc eiaipetikn Eutnpetnon TELATW, n toia utoonpiizetai atto TNYEKTEVn mac yyunon. Elntoume va atolaaoe auto to Tpoiov yi TOnla xpvia sto eAiov.

1. OΔHΓIEΣ AΣΦΑΛΕΙΑΣ

NPOEIONOH

Aiaβaote Tc EowkaeIOTeC

TPOeIoToiOnoeIs aαφaλεiαs, Tc

TPOOETEC TPOEIDOTIOINOEIC aQPAAEiAc KAI TIC ONDYIECS. H m npon Twv TPOEIDOTIOINeew V aQPAeiaC KAI TOWV ONDYIW V TPOEiVA EeI Wc aTOTeEAqa NkEKTPOTTNxi, TUPKAYIA KAI/ noBapo Tpaumatouo. DuAxtE TIG TPOEIOTIOINeIC aQPAeiaC KAI TIC ONDYIEs YIa MEALovtIKn avopopa.

Ta ouβoλa Tou akoλouθoúv xρησιοτοιóuVTa σTO εγχεπίδια xρησιŋ ἡνω σTo Tpoióv:

Mny aToppinTeTo Tpoiov o ekataaannouc kabouc aToppmuatwV.

jgall jaii ciil jrgll gac jia jgc laa

y

a2jglg jaoall aXll Jnnae eaiell gill

e bll 1 j l l l l l l l l l l l l l l l l

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

a 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

g aalll aag yia jaiy 1aayy gss 1s1s1 s2y (J
1d11 11 100000000000000000000000000000000000000000000000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

a 1

aallll gglg jiaai lla aaiylicj 1 (
aii iaii gaii jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia

jaiiall aluulw cai jayy (a) 1111111111111111

ablll 1

y 1

Jaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaaa aagaa

g a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a 4a

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Jg 10000000000000000000000000000000000000000000000000000000000000000000

s jll j 1yj yg s c g j a l i y j p u wiy (g
a jll yu y j ayj yg s o j p u wiy a uauu
. jui y j u y j u

e bll llaa aalaa aolaa aalaa aai

yIa 1000000000000000000000000000000000000000000000000

y = 53

Jg 100000000000000000000000000000000000000000000000000000000000

aal aal alal aal aal aal aal aal aal

y-2jz-2jz

a 1 (RCD) a 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

[A \subseteq B \Leftrightarrow \forall x \in A \Rightarrow x \in B]

aal gallgol gol jil lgljll 15j 15ai pai

A

AGM1096P

j1jai jsin

J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J

aiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaiaia

laalgl aagaaol 1y jil jil jil jil

#

aal aal

iS.3.11

1.2.3.4.5.6.7.8.9.10

1.2

(BJ)JGL.3

Jusill Jusill 5

gill jaiil jaii 6

7

#

0.8

15 9

(jia 2023)

Cii 11

bi 12.

1.2

aai 1 aai i 1 1

（）

（）jJ 10

（1）j 1

(5) + =

1 1

（）

140 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 12

（）aalglggsaagbgsa

（A）jJyS 9

aalalalalalalalalalalalal

i 1

J 1

（）

i 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

y

#

Jaaa Jaaa aai baaiaa aai jaaai aai jaaai

(1)

jia 1

y j 100000000000000000000000000000000000000000000000000000000000000000000000000000

jai jia jiu ci jayi

.5yall Jaell gaii jg piai, Jaoa aai

aaiy

A

.5g ailliee yaiy jil

Jae aee ae s jiee

Sckl biaal a Jaaai 0aay ay

Jaaal aabdoj jai

Jauy y

Jus Kuyi gui la jil, ayl Jua

.

ii.4

a, aJy jay yjai Jy jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jay jjay

aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aaiy aal y 1000000000000000000000000000000000000000000000000000000

aLilaiylll

aBbbl dBlw j

aieaaal 25 jai jia aaiyaii i yaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyaiyai

中

j/ jyaiy jiyj 1 yiyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 jyj 1 j

2

aagll aaggl aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll aagll

J 1

AGILI TASLAYICI AGM1096P 1400W 125MM