MR 689 - Radio CLATRONIC - Free user manual and instructions

Features	Details
Device type	Radio
Frequencies	AM/FM
Power supply	Mains and battery
Output power	3 W
Display	Backlit LCD screen
Additional features	Alarm, timer, headphone jack
Dimensions	24 x 12 x 10 cm
Weight	1.2 kg
Usage	Ideal for listening to the radio at home or on the go
Maintenance	Clean with a soft cloth, avoid moisture
Safety	Do not expose to water, use only with the supplied adapter
Warranty	2 years

Frequently Asked Questions - MR 689 CLATRONIC

Why won't my CLATRONIC MR 689 radio turn on?

Check if the device is properly plugged into a working power outlet. Also, make sure the power button is in the 'ON' position.

How do I tune the radio station on the CLATRONIC MR 689?

Use the station tuning knob to manually search for the desired station, or use the automatic search function if available.

The sound quality of my radio is poor, what should I do?

Make sure the antenna is fully extended and properly oriented. Also, check that the device is away from other electronic devices that could cause interference.

How do I reset my CLATRONIC MR 689 radio?

To reset the device, unplug it from the power outlet, wait a few seconds, then plug it back in.

My radio does not receive some stations, what can I do?

Check the signal quality at your location. Some stations may not be available in all areas. Try moving the radio or repositioning the antenna.

Can I listen to music from my phone on the CLATRONIC MR 689?

Check if your radio is equipped with Bluetooth or an auxiliary input. If so, connect your device via Bluetooth or with an auxiliary cable.

How do I change the batteries on the CLATRONIC MR 689?

Remove the cover of the battery compartment located on the back of the device. Replace the used batteries with new ones, respecting the polarity.

What should I do if the display on my radio is off?

Check if the device is powered and try resetting it. If the problem persists, it may be necessary to contact customer service.

How do I adjust the volume on the CLATRONIC MR 689?

Use the volume knob located on the front panel of the device to increase or decrease the sound level.

The radio turns off automatically, why?

This may be due to an automatic standby function. Check the manual to disable this feature if necessary.

Where can I find the user manual for the CLATRONIC MR 689?

The user manual is usually included in the packaging. You can also find it on the official CLATRONIC website under the 'Support' or 'Downloads' section.

USER MANUAL MR 689 CLATRONIC

Overview of the Components 3

Instruction Manual. 29

Technical Data 31

Guarantee 32

Spis tresci

PL

Strona

UKW = FM, Mittelwelle = AM.

UKW = FM, middengolf = AM.

HIGH (hoger), LOW (dieper)

Uitschakelen

HIGH (plus aigu), LOW (plus grave)

Jamás se abrìra la carcaşa del cuerpo del aparato. Las reparaciones mal hechasSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEO SEOOO

UKW = FM,onde medie = AM.

General Safety Instructions

To avoid the risk of fire or an electric shock, you should not expose the device to rain or moisture. Consequently, do not use the device in the immediate vicinity of water - for example near a bath tub, a swimming pool or in a damp cellar.

Use the device only for the intended purpose.

Only connect the device at a properly installed plug socket. Pay attention that the specified voltage corresponds to the voltage of the plug socket.

When using external mains supply, pay attention to the correct polarity and voltage. Always place the batteries in the correct direction.

Assemble the device in such a way that the available ventilation openings are not covered.

Never open the housing of the device. Incorrect repairs can constitute a considerable risk for the user. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. Check the mains supply cable regularly for damage.

For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similar quali ed person.

If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries.

These symbols may be found on the machine and are intended to indicate the following:

The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels.

The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation.

Devices bearing this symbol work with a „class 1 laser“ for tracing the CD. The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened.

Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light.

GB

Description of the Components

1 Band selection switch 6 Aerial
2 Station scale 7 Battery compartment
3 TUNING control 8 Handle
4 VOLUME/OFF volume control 9 TONE Sound control
5 Loudspeakers 10 PHONE Headphone connection

Initial Use of the Radio Recorder/Introduction

• Please read the operating instructions carefully before using the radio recorder for the first time!
• Select a suitable location for the radio recorder, such as a dry, fl at, non-slip surface on which it is easy to operate the machine.
• Ensure that the radio recorder is suffi cientsly ventilated!

Power supply

• Connect the power cable supplied (e.g. battery compartment) to a properly installed 230V / 50Hz safety power socket.
• Ensure that the voltage is the same as that indicated on the model identifi cation plate.

Inserting the Batteries (not supplied)

• Open the lid of the battery compartment on the back.
• Insert 4 batteries of type UM2/R14 1,5V. Please ensure that the polarity is correct (see the floor of the battery compartment or the inscription on the outside)!
• If the device is not going to be used in battery mode for a prolonged period, please remove the batterie(s) in order to prevent leakage.

Note:

If the mains lead is connected the mains power supply automatically takes priority.

Note: Do not dispose of batteries in the domestic waste. Please return used batteries to the relevant collection points or the shop where they were bought.

Never throw batteries into a fire.

Headphone Socket

Please use headphones with a 3.5mm stereo jack plug; these should be inserted into the PHONE socket. The loudspeakers are then switched off.

Listening to the Radio

1. Turn the VOLUME control clockwise to switch on the device and set the desired volume.
2. Move the band selector switch to the FM or AM position, depending on which frequency band you would like to listen to.

UKW = FM, Medium Wave = AM.

1. Tune into the desired station using the TUNING regulator.
2. For VHF/FM mode pull out the telescopic antenna and turn it to improve reception.
3. An aerial is integrated into the device for the reception of AM stations. The machine can be aligned to the station by turning it.
4. With the TONE control you can set the desired tone.

HIGH (higher), LOW (lower)

Switch-off

The device is switched off when the VOLUME control is turned to the OFF position. Unplug the device.

Cleaning and care

• Before cleaning remove the mains lead from the socket.
• Clean the housing with a soft, dry cloth without additives.

Technical Data

Model: MR 689

Power supply: 230 V, 50 Hz

Protection class: II

Output rating: 20 W PMPO

Radio section:

Frequency ranges: .UKW / FM 88 ~ 108 MHz .MW / AM 540 ~ 1600 kHz

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

GB

Guarantee

The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.

If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt.

*) Damage to accessories does not mean automatic free replacement of the whole machine. In such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge.

Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the expiry of the guarantee

After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.

Information concerning where the equipment can be disposed of can be obtained from your local authority.

In many EU countries the disposal of electrical and electronic equipment in the domestic waste is prohibited from August 13, 2005 on.

In Germany from March 23, 2006 on.

PL