MRC 4157 - Radio AEG - Free user manual and instructions

USER MANUAL MRC 4157 AEG

Overview of the Components......Page 3

Instruction Manual......Page 59

Technical Data Page 67

Disposal.. Page 68

Jczyk polski

Spis tresci

Przegladelementowobslugi.....Strona 3

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

Wards of dangers for your health and indicates potential risks of injury.

CAUTION: Indicates potential dangers for the device or other objects.

NOTE: Highlights tips and information for you.

General Safety Guidelines

Before using this device, carefully read this user manual and keep it together with the Warranty Certificate, cashier receipt and if possible, the original package inclusive its interior packing. If you hand on the device to any third person, include the user manual as well.

• To avoid the risk of fire or electric shock, you should not expose the device to rain or humidity. Do not use the device near water (e.g. bathroom, swimming pool, humid cellars).
• Do not use the unit in extremely hot, cold, dusty, or damp places.
• The unit is designed solely for private use and its intended purpose. This unit is not designed for commercial use.
• Make sure that the power cable is not bent, pinched, or comes into contact with heat sources.
• Make sure that the power cable is not a tripping hazard.
• The power supply unit is only suitable for use in dry rooms.
• Never touch the power supply unit or the cable with wet hands.
• Only connect the power supply unit to a properly installed wall outlet. Ensure that the listed voltage matches the voltage of the wall outlet. Also ensure that the output current, voltage and the polarity of the power supply unit match the information on the connected device.
• Always install batteries in the correct direction.

60 English

• Avoid covering the device's vent openings.
• Never cover the vent holes with objects, such as magazines, tablecloths, curtains etc.
• This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on apparatus.
• Open sources of fire, such as e.g. burning candles may not be placed onto the unit.
• Never open the device's case. Improper repairs can cause severe danger to the user. If the device or particularly the power cord is damaged, don't use the device any further and have it repaired by a qualified specialist. Check the power cord regularly for damage.
• If you do not use the device for a long period of time, pull the power supply unit from the wall socket and/or remove the batteries.
• Disconnect the unit from the power supply for cleaning or if a fault occurs.

These symbols may be found on the machine and are intended to indicate the following:

The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels.

The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation.

Children and Frail Individuals

• In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING:

Do not allow small children to play with the foil. There is a danger of suffocation!

• This device is not intended to be used by individuals (including children) who have restricted physical, sensory or mental abilities and/or insufficient knowledge and/or experience, unless they are supervised by an individual who is responsible for their safety or have received instructions on how to use the device.
• Children should be supervised at all times in order to ensure that they do not play with the device.

Overview of the Components

1 POWER/FUN button
2 HOUR/TU - button
3 MIN/TU + button
4 SNOOZE/SLEEP/HIGH/LOW/OFF button
5TIMESET/M+button
6AL1/VOL - button
7 AL2/VOL+ button
8 Indicator for radio switched on (FM)
9 Indicator for activated alarm function 2 (BUZZER AL 2) (Buzzer)
10 Indicator for activated alarm function 2 ( RADIO AL 2) ( Radio )
11 Indicator for activated "Delayed Switch-off" function (SLEEP)
12 LED display
13 Indicator for radio switched on (AM)
14 Indicator for activated alarm function 1 (BUZZER AL 1) (Buzzer)
15 Indicator for activated alarm function 1 (RADIO AL 1) (Radio)
16 Put-up hinge
17 DC 5V power supply connection
18 AUXIN jack (3.5 mm stereo jack)
19 headphone jack
20 USB-OUTCHARGE charginssocket

Back Side (notshown)

Battery compartment (power reserve)

FM wire aerial

First Use of the Device / Introduction

• Select a proper place for the device. A dry, level and slip proof surface is suitable.
• Make sure the device is vented sufficiently!
• Remove the protective film from the device, if present.
• In all modes, the display automatically switches to the time display after about 10 seconds.

Power Supply

1. Make sure the grid voltage corresponds to the figures on the rating plate.

62 English

1. Plug the power supply unit into a properly installed protective contact socket.
2. Connect the device with the power supply unit by plugging the jack of the power supply unit into the "DC 5V" jack.

CAUTION:

• This device should only be used with the mains supply unit (included). Do not use it for other devices.
• Only use a 5 V power supply unit (⊙-⊙). A different supply unit may damage the device.

i NOTE:

• Disconnect from mains power supply during longer periods of non-use.
• If you did not insert another reserve battery, the time and the station memory will be lost as soon as the power supply is interrupted.

Inserting the Reserve Batteries

(Batteries are not included in the scope of delivery)

In case of power failure or if the power supply unit is pulled from the plug, the settings are maintained if the reserve batteries are inserted.

1. Open the battery compartment lid on the back.
2. Insert two type AAA / R 03 1.5 V batteries. Check that the polarity is correct (see battery compartment).
3. Close the battery compartment.

WARNING:

The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion!

CAUTION:

• Batteries can leak battery acid. If the device is out of use for a long period of time, remove the batteries.
• Different battery types or new and used batteries must not be used together.
• Batteries are not to be disposed of together with domestic wastes. Dispose of the used batteries at the relevant collection bin or at your dealer's.

USB - OUT CHARGE Charging Socket

You can charge your Smart phone through this jack. Use the USB cable of your Smart phone for the connection.

i NOTE:

• Due to the different Smart phone types that are offered today, and their different charging capacities, the loading duration is dependent on the Smart phone used and its operating condition.
• A playback of audio-files through this connector is not possible.

Headphone Jack

For headphone operation, use headphones with a 3.5mm jack plug that you plug into the headphone jack of the device. The loudspeaker is switched off.

Setting the Time

1. Switch the device off.
2. Keep the TIME SET / M + button pressed for a short time. The time indicator begins to flash.
3. Set the hours with the HOUR / TU - button and the minutes with the MIN / TU + button.

i NOTE:

If you do not press a button within 4 seconds, the settings are automatically accepted.

General Operation

Switch Device on/off

• You can toggle the device between standby and radio mode with the POWER / FUN button. The dot next to "FM" and / or "AM" lights up in radio mode.

• Switching on = Press the button

• Switching off = Keep the button pressed for about 2 seconds

• To disconnect the unit completely from the mains, pull the mains plug from the socket.

64 English

Volume

By pressing the AL1 / VOL - / AL2 / VOL + buttons you can adjust the desired volume.

Select the Operating Mode (FM, AM or AUX)

Press the POWER / FUN button until the desired operating mode is shown on the display.

Display Brightness

Press and hold the SNOOZE/SLEEP/HIGH/LOW/OFF button repeatedly to select the desired display brightness. Select from: Light, dark and off.

Delayed Switch-off

When the device is switched on, you can set the time after which the device will turn into standby mode; set the time in 10 minutes intervals from 90 to 10 minutes. The device will turn off automatically after the preset time.

1. Press the SNOOZE/SLEEP/HIGH/LOW/OFF button. The notification "90" will appear in the display.
2. Press the button repeatedly to reduce the time in steps of 10. The "OFF" setting deactivates the function.

i NOTE:

• To call up the still remaining time, press the SNOOZE/SLEEP/HIGH/LOW/OFF button briefly.
• When activated the dot in the display next to "SLEEP" is illuminated.

Radio Mode

1. Switch the device on.
2. Select the required frequency band by repeatedly pressing the POWER / FUN button. A dot lights up on the display next to FM (frequency modulation) or AM (medium wave).
3. Search for Radio Stations:

Briefly press the MIN / TU + / HOUR / TU - buttons, until you have found the radio station which you are looking for. Press and hold one of the two buttons to search for the next or previous radio station respectively.

Preset Station: Keep the TIME SET / M + button pressed for approx. 3 seconds. Select a preset location with the buttons MIN / TU + / HOUR / TU -. Press the TIME SET / M + button once more. The station is preset.

i NOTE:

• If the reception is too weak and there is interference on the received station, try to improve the reception by altering the position and uncoiling or coiling the antenna.
• The device features a built-in antenna for receiving AM radio stations. Reposition the device for better reception of a station.

Select the Preset Radio Station

While in radio operation, repeatedly press the TIME SET / M+ button. One pre-set location after the other will be called up.

Alarm Function

General Information

• You'd like to be woken up by radio? First set a station. The device switches on the last FM radio station that was set.
• When the alarm time is reached, a dot flashes next to "BUZZER AL 1" or "RADIO AL 1" and/or "BUZZER AL 2" or "RADIO AL 2".

Setting of the Alarm

You can set two alarm times. Proceed as follows:

1. Keep the AL1 / VOL - button pressed for approx. 3 seconds. The indicator begins to flash.
2. Set the hours with the HOUR / TU - button and the minutes with the MIN / TU + button.

3. Then use the AL1 / VOL - button to select how you want to be woken up. Select from:

4. Buzzer(BUZZER AL1):

A buzzer sounds when the alarm time is reached. The volume of the buzzer cannot be adjusted.

• Last heard radio frequency (RADIO AL 1):

As soon as your set alarm time is shown, the radio switches on. The last FM station plays at the volume set by the manufacturer.

66 English

1. After you have made the setting, the selected alarm time flashes for ca. 3 seconds. The alarm time is stored. Then the current time is displayed.

To set the second alarm time, repeat the above steps with the AL2/VOL+ button.

i NOTE:

• In case of an activated alarm time, a dot will light up at "BUZZER AL 1 / RADIO AL 1" and/or at "BUZZER AL 2 / RADIO AL 2".
• If you do not press a button within 4 seconds, the settings are accepted automatically.
• The alarm function ends automatically after approx. 60 minutes and the device switches off.

Turning off the Alarm

To shut the alarm signal off until the next day, press the POWER / FUN button.

Automatic Alarm Interval

The automatically set alarm function can be shut off for approximately 9 minutes with the SNOOZE/SLEEP/HIGH/LOW/OFF button.

i NOTE:

If the function is activated, the dot next to "BUZZER AL 1 / RADIO AL 1" and/or at "BUZZER AL 2 / RADIO AL 2" will flash.

Deactivate the Alarm Function (in standby mode)

Press AL1 / VOL- or AL2 / VOL+ until the dot at "BUZZER AL 1 / RADIO AL 1" or at "BUZZER AL 2 / RADIO AL 2" goes out.

AUX-IN Jack

For connecting to external players, e.g. MP3 player, smartphone, tablet PC etc.

1. Connect the external device to the AUX-IN jack with a 3.5mm stereo jack.
2. Press the POWER / FUN repeatedly until "RUH" is shown on the display.
3. You will hear the sound playback from the external device through the loud-speaker. Use the AL1/VOL-/AL2/VOL+ buttons to adjust the volume. The control buttons are not available.
4. For further information, please refer to the manual for the external audio source.

i NOTE: Adjust the volume of the external device to an audible level.

Cleaning

CAUTION: Do not immerse the device in water.

• Disconnect the mains plug before cleaning.
• Clean the device with a soft damp cloth without detergents.

Troubleshooting

Problem Cause Solution
The unit cannot be operated.	The unit is blocked and "hangs".	Disconnect the power supply for 5 seconds. Then switch the device on again.
No display Display brightness is turned off		Hold down the SNOOZE / SLEEP/HIGH/LOW/OFF button to restore the display.

Technical Data

Model: MRC 4157

Power supply: DC 5V, 1A

Power consumption: 7.5W

Battery power reserve: 2x 1.5V, AAA, R03

Frequency range: FM 87.5 ~ 108.0MHz

AM 522 ~ 1620kHz

Net weight: approx. 0.276kg

External Power Adaptor

Input: AC 100-240V, 50/60Hz, 0.18A

Output: DC 5V/1A

Polarity:

1. Protection class: II

The right to make technical and design modifications in the course of continuous product development remains reserved.

68 English

This device complies with all current CE directives, such as electromagnetic compatibility and low voltage directive and is manufactured according to the latest safety regulations.

Disposal

Meaning of the "Wheelie Bin" Symbol

Take care of our environment, do not dispose of electrical appliances via the household waste.

Dispose of obsolete or defective electrical appliances via municipal collection points.

Please help to avoid potential environmental and health impacts through improper waste disposal.

You contribute to recycling and other forms of utilization of old electric and electronic appliances.

Your municipality provides you with information about collecting points.

Instrukcja obstugi

CTC Clatronic Sp. z o.o

AEG is a registered trademark used under license from AB Electrolux (publ)