310266-01 - Humidifier DYSON - Free user manual and instructions

Brand	Dyson
Model	310266-01
Product Type	Humidifier with heating and cooling functions
Power Supply	230 V, 50 Hz (EU compatible)
Power	Not specified, but heats up to 37°C
Dimensions (height x width x depth)	Approx. 100 cm x 20 cm x 20 cm (estimate)
Weight	Approx. 3.5 kg (estimate)
Water Tank Capacity	Not specified
Airflow	Adjustable across 10 speeds
Main Functions	Humidification, air purification, heating, cooling, oscillation, timer, magnetic remote control
Operating Modes	Ambient mode (diffuse) and targeted mode (personal), heating, cooling
Filter	Non-washable filter unit, replacement recommended every 12 months (12h/day)
Remote Control Type	Magnetic, attaches to top of the device, CR2032 battery
Display	Digital LED, dimmable after 10 seconds
Auto Shut-off	If tipped over, overheating, or after 9 hours continuous operation in heating mode
Tilt	Manually adjustable forward or backward
Oscillation	Yes, controlled by remote
Safety	Automatic cut-off, protected hot surfaces, magnets in device (precautions for pacemakers)
Maintenance and Cleaning	Unplug and allow to cool for 1-2 hours before maintenance. Clean with a soft dry or damp cloth without detergent. Check for obstructions in air inlets.
Spare Parts and Repairability	Replaceable filter (purchasable at www.dyson.com/filter), remote control battery (CR2032), repairs by Dyson or authorized agent.
Warranty	2 years parts and labor (excluding filter), from date of purchase
General Information	Household use only, do not use outdoors or in a bathroom. Do not spray perfume on the filter.

Frequently Asked Questions - 310266-01 DYSON

How to use the remote control?

The remote control is magnetic and attaches to the top of the device, buttons facing down. It allows you to adjust the airflow power, temperature, heating/cooling modes, oscillation, and timer.

When to replace the filter?

The device displays a replacement indicator after approximately 12 months of use (12h/day). The filter is neither washable nor recyclable. Purchase a new filter at www.dyson.com/filter.

How to clean the device?

Unplug the device and allow it to cool for 1-2 hours. Clean the surface with a soft dry or damp cloth without detergent. Remove obstructions from air inlets with a soft brush.

What to do if an error code appears (F4, F5, F6)?

Unplug the device, wait 30-60 seconds, then plug it back into a different outlet. If the code persists, contact Dyson Customer Service.

Can the device be used without the remote control?

Yes, but to a limited extent. The Standby button on the base allows turning on/off and setting the target temperature. Other functions (airflow, modes, oscillation) require the remote control.

Which battery does the remote control use and how to replace it?

The remote control uses a CR2032 coin cell battery. Unscrew the battery compartment, remove the old battery, and insert the new one observing polarity.

How to set the timer?

Press and hold the timer button on the remote control to select the duration. The timer is displayed and the device goes into standby at zero. To cancel, reduce the duration until two dashes appear.

What are the important safety precautions?

Do not use near water or outdoors. Avoid contact with hot surfaces in heating mode. Keep away from children under 3 years. Do not cover the device. Magnets may affect pacemakers.

How does automatic shut-off work?

The device shuts off automatically if tipped over, overheats, or after 9 hours of continuous operation in heating mode. Unplug it, let it cool, and check for obstructions before restarting.

Where to find the serial number and how to contact customer service?

The serial number is on the rating plate under the device. For any questions, call Dyson Consumer Service at 0800 94 58 01 (France) or visit www.dyson.fr.

USER MANUAL 310266-01 DYSON

This product is only suitable for well

insulated spaces or occasional use.

THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE.

After registering your free 2 year guarantee, your Dyson appliance will be covered for parts and labour (excluding filters) for 2 years from the date of purchase, subject to the terms of the guarantee. If you have any questions about your Dyson appliance, call the Dyson Helpline with your serial number and details of where/when you bought the appliance. Most questions can be solved over the phone by one of our trained Dyson Helpline staff.

Your serial number can be found on your rating plate which is on the base of the appliance.

SERVICE CONSOMMATEURSDYSON

MERCI D'AVOIR CHOISI UN APPAREIL DYSON.

BJIAGOДAPIM3A BbIBOPYCTPOHCTBA DYSON.

Bahe yctpoicbTO Dyson haoiHcHa rapaHTnHOM o6cyjxnbAHn B TeueHne 2 let C MOMeHTa NOKyIKN (3a NCKIIOUeHNEM fNtBPOB), B COOTBeTCTBnC yCNOBIAIM N NCKIIOUeHNIAIM, YK3aAHNbIM B DAHHo IHCTpykIIN NO EKCNIYATAuIN. EcIn y Bac BO3NHKHY KAcHe-Jin60 BONPCbI, No3BOHNTe B CyJX6y IOnDEpKKn KJNeHTOB Dyson, YKaJXte cepHnHbI Homep BaWero yCTpoiCTBa n Ige n KOrJa Bbl erO kynnn. BoJIbShnCTBO BONPCOB MOnKHO yJaINTb NO TeneΦOHy C ODNHM n3 KBaIIHfNcPiPoBAHbIX cOTpydNikOB CyJX6bI POnDEpKKn KJNeHTOB Dyson.

CepinHbI HOMep n3dJIy HaxoJITbcra Ha o6opOTHOI cTOpOHe OCHOBAHn.

DYSONOVA POMOC UPORABNIKOM

HVALA, KER STE SE ODLOCILI ZA NAKUP NASEGA IZDELKA.

This illustration is for example purposes only.

Note your serial number for future reference.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE

When using an electrical appliance, basic precautions should always be followed, including the following:

WARNING

THE APPLIANCE AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS.

1. Pacemakers and defibrillators may be affected by strong magnetic fields. If you or someone in your household has a pacemaker or defibrillator, avoid placing the remote control in a pocket or near to the device.
2. Credit cards and electronic storage media may also be affected by magnets and should be kept away from the remote control and the top of the appliance.

WARNING

These warnings apply to the appliance, and also where applicable, to all tools, accessories, chargers or mains adaptors. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

1. When used in heating mode the appliance is hot when in use and for a short period after use. To avoid burns, do not let bare skin touch hot surfaces. When moving the appliance hold it by the base, not the air loop amplifier.
2. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains, at least 0.9m (3 feet) from the front of the appliance and keep them away from the sides and rear when the appliance is plugged in.
3. Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than that shown in this manual, or advised by the Dyson Helpline. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
4. Ensure appliance is fully assembled in line with the instructions before use. Do not dismantle the appliance or use without the loop amplifier fitted.
5. Do not allow to be used as a toy.

Close attention is necessary when used by or near children. Children of less than 3 years should be kept away unless continuously supervised. Children should be supervised to ensure that they do not play with the appliance and remote control.

1. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance. CAUTION - Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
2. This Dyson appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, only if they have been given supervision or instruction by a responsible person concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance should not be performed by children without supervision.
3. Suitable for dry locations ONLY. Do not use outdoors or on wet surfaces. Do not use in bathrooms, laundry areas or similar indoor locations. Never locate the appliance where it may fall into a bath or other water container. Do not use or store where it may get wet or in the immediate surroundings of a bath, a shower, or a swimming pool.
4. This appliance has hot parts inside. Do not use it in areas where petrol, paint, or flammable liquids are used or stored or where their vapours are present. Do not use in conjunction with or directly next to an air freshener or similar products.
5. Do not locate directly below a mains electricity supply socket.
6. Always plug directly into a wall socket. Never use with an extension cable as overloading may result in the cable overheating and catching fire.

7. Do not handle any part of the plug or appliance with wet hands.

8. Do not use with a damaged cable or plug. If the supply cable is damaged it must be replaced by Dyson, its service agent or similarly qualified person in order to avoid a hazard.

9. Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
10. Do not stretch the cable or place the cable under strain. Keep cable away from heated surfaces.
11. Do not route the cable under furniture or appliances. Do not cover cable with throw rugs, runners or similar coverings. Arrange cable away from traffic area and where it will not be tripped over.
12. To prevent a possible fire, do not use with any opening or exhaust blocked, and keep free of dust, lint, hair, and anything that may reduce airflow. Do not put any object into the inlet grill or the exhaust opening as this may cause an electric shock or fire, or damage the appliance.
13. Do not use on soft surfaces, such as a bed, where openings may become blocked.
14. In order to avoid overheating and fire hazard, do not cover the appliance.
15. Turn off all controls before unplugging.
16. Do not use any cleaning agents or lubricants on this appliance. Unplug before cleaning or carrying out any maintenance.
17. If there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may need to be replaced. Check with a qualified electrician to replace the socket.
18. WARNING: Chemical Burn and Choking Hazard. Keep batteries away from children. This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

19. If the appliance is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact the Dyson Helpline.

20. Contact the Dyson Helpline when service or repair is required. Do not disassemble the appliance as incorrect reassembly may result in an electric shock or fire.

21. Do not put any object into openings or the inlet grille. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
22. Always carry the appliance by the base, do not carry it by the loop amplifier.
23. To avoid a tripping hazard wind the cable when not in use.
24. Do not use near furnaces, fireplaces, stoves or other high temperature heat sources.
25. Do not use in conjunction with or directly next to an air freshener or similar products. Do not spray or apply perfumes directly on or near the filter. Keep essential oils and chemicals away from the appliance.
26. The appliance should not be forcefully turned or oscillated, under any circumstances. This will cause damage to the oscillation mechanism.
27. When removing or replacing the filter, take care to keep your fingers clear.

IMPORTANT SAFETY FEATURES

For your safety this appliance is fitted with automatic cut-out switches that operate if it tips over or overheats. If the switches operate, unplug the appliance and allow it to cool. Before restarting, check and clear any blockages and ensure the appliance is on a solid level surface.

READ AND SAVE THESE INSTRUCTIONS

This Dyson appliance is intended for household use only.

Do not pull on the cable.

In order to avoid overheating and fire hazard, do not cover the appliance.

Do not store near heat sources.

Do not carry by the air loop amplifier. The air loop amplifier is not a handle.

Do not use near naked flames.

Do not spray scented products such as air freshener or perfume near the filter or the appliance.

FR/BE/CH

CONSIGNES DE SECURITE IMPORTANTES

AVANT D'UTILISER CET APPAREIL, LISEZ ATTENTIVEMENT LES INSTRUCTIONS ET LES MISES EN GARDE FIGURANT DANS CE MANUEL ET SUR L'APPAREIL

TYTO POKNY SI PRECTÉT A USCHOVEJTE

BEHTINJIATOPI NYIbT INCTAHUHOHNO YNPABJIENIA COIDEPKAT MAFHNTbl.

Bo n36eXaHne nepepeBa n Bo3rOpAnHa He hakpbBaTe yctpoIcTbO.

He xpaHnte He BKJIOUaJIte yCTPOIcTB0 B6N3n ITOuTHKOB TENNA.

He nepenochte
yctpoiTeBO,epxga
ero 3a ycnntnTeB03dyuHoro kOHTpya.
YcnntnTeB03dyuHoro
kOHTpya He yBnErcTa
pyKo nI pyneHocHa.

He nnonb3yIe yctpoCTBcO B6n3nOTKpbTOrOrH.

He paçnbijnayTe apomatnueckne a3p030nn, TAKHe KAc OCbEjntEn NBO3Dyxa nnnpapfOmepeRn, Hnocep6dETBHoN pAOnC mФInbTpOM nHyn YCTPOHCTOBm.

SE

VIKTIGA SÄKERHETS-FÖRESKRIFTER

INNAN DU ANVÄNDER VERKTYGET LÄS SAMTLIGA ANVISNINGAR OCH VARNINGSTEXTER I BRUKSANVISNINGEN OCH PÅ VERKTYGET

Each time the heating mode is selected, it conducts a short calibration cycle. Airflow will be automatically controlled during this cycle. Once the calibration cycle is complete, it will revert to the selected airflow speed.

On first use, the appliance will default to a temperature 3^ higher than the detected room temperature. Thereafter, the appliance will remember the last target temperature set.

Select the desired room temperature. Pressing the large red button on the remote control increases the target temperature by 1^ ; the smaller red button on the remote control decreases it by 1^ . The appliance will not operate in heater mode unless the target temperature is above the room temperature.

Remote control

Remote control docks magnetically.

Attach the remote control to the top of the machine with the buttons facing down.

Heating and cooling modes

Press the red thermostat control button until the digital display shows the target room temperature. The power button light will change from blue to red to indicate that you have entered heating mode. The red circle will disappear when the target room temperature is reached. Once the target room temperature has been reached, the appliance will stop heating the air. If the room temperature falls below the target room temperature, the appliance will start to heat again.

Press the blue cooling mode button to enter cooling mode. The power button light will change from red to blue to indicate that you have entered cooling mode. To adjust the airflow speed use the airflow control button.

Sleep timer

Tilt function

To set the sleep timer, press and hold the timer button to select the desired time. When time reaches zero, the appliance will go into standby mode. To cancel, increase the time until two dashes appear.

When using the sleep timer, the LED display will turn off after 10 seconds of inactivity.

Carefully hold the base and the main body. Tilt the amplifier forward or backward for the required airflow angle.

Diffused and focused modes

Diffused mode

Press the wide angle button to change from a personal directed airflow to wider projection of air flow.

Heating and cooling modes work in this mode.

Focused mode

Press the narrow angle button to change from a wider projection of airflow to a personal directed airflow.

Heating and cooling modes work in this mode.

Oscillation and airflow speed control

Oscillation control

To start the appliance oscillating, press the oscillation control button. To stop the appliance oscillating, press it again. The appliance will not oscillate when the control buttons are pressed.

Airflow speed control

To change the airflow speed press the airflow control button. The digital display will show the new fan speed. If in heater mode after 2.5 seconds it will change back to displaying the target temperature.

Clearing blockages

Cleaning

Ensure the appliance is unplugged. If the appliance has been in use, leave for 1 to 2 hours in order to allow the appliance to cool down completely. Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush to remove debris.

Unplug from the mains electricity supply. If the appliance has been in use, leave for 1 to 2 hours before cleaning to allow the appliance to cool completely. Dust may accumulate on the surface of the machine. Wipe dust from the loop, filter unit and other parts with a dry or damp cloth when dust accumulates. Do not use detergents or polishes.

Caution: hot when in use

This appliance is hot when in use and for a short period after use. Do not let bare skin touch hot surfaces. If children are present, consider positioning the appliance out of their reach.

Battery replacement

Battery type CR 2032.

Unscrew the battery compartment on the remote control. Loosen the base and pull to remove the battery.

Replacing the filter unit

1

When your non-washable filter unit needs replacing the appliance will display the pattern shown. To replace the non-washable filter unit, follow these steps. Ensure the appliance is unplugged, if the appliance has been in use, leave for 1 to 2 hours before replacing the filter unit to allow the appliance to cool down completely. Your Dyson appliance is programmed to remind you to replace the filter unit after 12 months based on 12 hours usage a day. Please note your indicator will activate sooner with more use. The indicator is only a guide and you may need to replace the filter unit more regularly.

2

3

4

5

6

7

A clockwise-rotating loading pattern will be shown on the LED display.

Once the loading pattern is complete, the appliance will return to its normal usage.

When you have re-assembled your appliance, press and hold the 'Standby ON/OFF' button for 6 seconds on the remote control to reset the filter indicator.

Mode de puissance

YTo6bIyCTaHOBHTaTmEp Cha, HaxMnte N

yndeKnBaTe KhONky TaMepa Tny Bb6opa HyxHoro

UcTPOCTBAHKMNTe KONKynpaBHeNbPAeHnEM.

YTo6blOCTaHOBnTB BpaueHne

yCTpO'CTBa, HAXMnte KHONKy

eue pa3. Pn HaxkATN KHOK

ynpabneHn yctpoiCTBO He

6ydtBpaatabca.

YnpabneHcckopoctbio

BO3dUwHOro NOTOKa

YTO6bI N3MeHHTb CKOPOCTb

BO3yUHoro NOTOKa, HaxMnte

KHONKY npabneHHBOZdyHbIM

notokom.Haunphiobom

DinCnIee OTo6pa3ntc HOBoe

3haueHne cKOpocTH;Yepe3

3cekyHdbHa 3KpaHe BHOb

USING YOUR DYSON APPLIANCE

PLEASE READ THE 'IMPORTANT SAFETY INSTRUCTIONS' IN THIS DYSON OPERATING MANUAL BEFORE PROCEEDING.

LOOKING AFTER YOUR DYSON APPLIANCE

• Do not carry out any maintenance or repair work other than that shown in this Dyson Operating Manual, or advised by the Dyson Helpline.
  Always disconnect the plug from the mains before inspecting for problems. If the appliance will not operate, first check the mains socket has an electricity supply and that the plug is properly inserted into the socket.

OPERATION

• Ensure appliance is fully assembled in line with the instructions before use. Do not dismantle the appliance or use without the loop amplifier fitted.
  The appliance will not operate in heating mode unless the target temperature is above the room temperature.
  Each time the heating mode is selected, it conducts a short calibration cycle. Airflow will be automatically controlled during this cycle. Once the calibration cycle is complete, it will revert to the selected airflow speed.
• The appliance will not oscillate when the control buttons are pressed.
• Do not lubricate any part of this appliance.

CONTROL WITHOUT THE REMOTE

• Press the power button on the appliance to turn ON/OFF.
• Press and hold the standby button on the appliance to adjust the target temperature. The target temperature will increase to a maximum before decreasing. If the target temperature is set at 0^ it will switch from heating to cool mode.
• The airflow, diffused and focused modes, oscillation function and sleep timer controls cannot be operated without the remote control.

LED DISPLAY

The LED Display will dim after 10 seconds of use (the power button does not dim).
- Press any button, other than the standby ON/OFF, to reactivate.
- Do not press standby ON/Off as this will turn the appliance off.

SLEEP TIMER

To set the sleep timer, press and hold the timer button to select the desired time. When time reaches zero, the appliance will go into standby mode. To cancel, increase the time until two dashes appear.

The LED display will turn off after 10 seconds of inactivity - this is a power saving feature and avoids light interference at night time.
- Press any button, other than the standby ON/OFF, to reactivate.
- When sleep timer is ON, do not press the standby ON/OFF as this will turn the appliance off and turn sleep timer off too.

TILT FUNCTION

• Carefully hold the base and the main body. Tilt the amplifier forward or backward for the required airflow angle.

AUTOMATIC CUT-OUT

• For your safety this appliance is fitted with automatic cut-out switches that operate if the appliance tips over or overheats. If the switches operate, unplug the appliance and allow it to cool. Before restarting the appliance check and clear any blockages and ensure the appliance is on a solid level surface.
• In heating mode the appliance will automatically switch 'OFF' after 9 hours of continuous use and will return to standby mode. To restart the machine, press the power button on either the remote control or the base.

TROUBLESHOOTING

• Fault codes F4, F5, F6: If one of these appears on the display, unplug the appliance, wait for 30 to 60 seconds and/or plug the appliance into a different socket. If you continue to receive the fault code, please contact the Dyson Helpline.
• Fault codes F2, F3, F7: If one of these appears on the display, please contact the Dyson Helpline.

REPLACEABLE PARTS

BATTERY REPLACEMENT

CAUTION

Unscrew the battery compartment on the remote control. Loosen the base and pull to remove the battery.

• Do not install backwards or short circuit the batteries.
  Do not attempt to dismantle or charge the batteries. Keep away from fire.
  Always replace the screws in the remote control.
• Follow battery manufacturers' instructions when installing new batteries (battery type CR 2032).
• Limited functionality is available without the remote control (see 'Control without the remote').

NON-WASHABLE FILTER UNIT

• Your filter unit is non-washable and non-recyclable.
  To replace your filter unit follow the steps as shown.
• Failure to replace the filter when prompted may result in changes to product performance and appearance.
  A new filter unit can be purchased at www.dyson.com/filter.

DISPOSAL INFORMATION

• Dyson products are made from high grade recyclable materials. Recycle where possible.
• Dispose of or recycle the battery in accordance with local ordinances or regulations.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

• Keep the used batteries away from children as these can still harm children if swallowed.
• Your filter unit is non-washable and non-recyclable.
• Dispose of the exhausted filter in accordance with local ordinances or regulations.
  The battery should be removed from the product before disposal.

GUARANTEE TERMS AND CONDITIONS

DYSON CUSTOMER CARE

THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE.

After registering your free 2 year guarantee, your Dyson appliance will be covered for parts and labour for 2 years from the date of purchase, subject to the terms of the guarantee. If you have any questions about your Dyson appliance, call the Dyson Helpline with your serial number and details of where/when you bought the appliance. Most questions can be solved over the phone by one of our trained Dyson Helpline staff.

Alternatively, visit www.dyson.com for online help, general tips and useful information about Dyson.

Your serial number can be found on your rating plate which is on the base of the appliance.

If your Dyson appliance needs a service, call the Dyson Helpline so we can discuss the available options. If your Dyson appliance is under guarantee, and the repair is covered, it will be repaired at no cost.

PLEASE REGISTER AS A DYSON APPLIANCE OWNER

To help us ensure you receive prompt and efficient service, please register as a Dyson appliance owner. There are three ways to do this:
Online at www.dyson.com/register.
Telephone the Dyson Helpline on 0800 298 0298.
Complete the enclosed form and post it to us.
This will confirm ownership of your Dyson appliance in the event of an insurance loss, and enable us to contact you if necessary.

LIMITED 2 YEAR GUARANTEE

TERMS AND CONDITIONS OF THE DYSON 2 YEAR LIMITED GUARANTEE

WHAT IS COVERED

The repair or replacement of your Dyson appliance (at Dyson's discretion) if it is found to be defective due to faulty materials, workmanship or function within 2 years of purchase or delivery (if any part is no longer available or out of manufacture Dyson will replace it with a functional replacement part).
Where this appliance is sold outside of the EU, this guarantee will only be valid if the appliance is used in the country in which it was sold.
- Where this appliance is sold within the EU, this guarantee will only be valid (i) if the appliance is used in the country in which it was sold or (ii) if the appliance is used in Austria, Belgium, France, Germany, Ireland, Italy, Netherlands, Spain or the United Kingdom and the same model as this appliance is sold at the same voltage rating in the relevant country.

WHAT IS NOT COVERED

• Replacement filters. The appliance's filter is not covered by the guarantee. Dyson does not guarantee the repair or replacement of a product where a defect is the result of:
• Damage caused by not carrying out the recommended appliance maintenance.
• Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the appliance which is not in accordance with the Dyson Operating Manual.
  Use of the appliance for anything other than normal domestic household purposes.
  Use of parts not assembled or installed in accordance with the instructions of Dyson.
  Use of parts and accessories which are not genuine Dyson components.
• Faulty installation (except where installed by Dyson)
• Repairs or alterations carried out by parties other than Dyson or its authorised agents.
• Blockages - please refer to the illustrations and the section 'Clearing blockages' in this Dyson Operating Manual for details of how to look for and clear blockages.
  Normal wear and tear (e.g. fuse etc.).
• Reduction in battery discharge time due to battery age or use (where applicable).
  If you are in any doubt as to what is covered by your guarantee, please contact the Dyson Helpline.

SUMMARY OF COVER

The guarantee becomes effective at the date of purchase (or the date of delivery if this is later).

• You must provide proof of (both the original and any subsequent) delivery/purchase before any work can be carried out on your Dyson appliance. Without this proof, any work carried out will be chargeable. Keep your receipt or delivery note.
  All work will be carried out by Dyson or its authorised agents.
  Any parts which are replaced by Dyson will become the property of Dyson.
  The repair or replacement of your Dyson appliance under guarantee will not extend the period of guarantee.
  The guarantee provides benefits which are additional to and do not affect your statutory rights as a consumer.

IMPORTANT DATA PROTECTION INFORMATION

When registering your Dyson product:

• You will need to provide us with basic contact information to register your product and enable us to support your guarantee.
• When you register, you will have the opportunity to choose whether you would like to receive communications from us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest innovations. We never sell your information to third parties and only use information that you share with us as defined by our privacy policies which are available on our website: privacy.dyson.com

FR/BE/CH

UTILISATION DE VOTRE APPAREIL DYSON

VEUILLEZ LIRE ATTENTIVEMENT LES CONSIGNES DE SECURITE IMPORTANTES DE CE MANUEL DYSON AVANT DE CONTINUER.

ENTRETIEN DE VOTRE APPAREIL DYSON

INFORMATIONS DE MISE AU REBUT

UW DYSON APPARAAT ONDERHOUDEN

MANUTENZIONE DELL'APPARECCHIO DYSON

DYSON-ASIAKASPALVELU

KIITOS, ETTÄ VALITSIT DYSON-LAITTEEN.

SLIK VEDLIKEHOLDER DU DYSON-PRODUKTET

GWARANCJA NIE OBEJMUJE:

3APEHCTPNPYTE CBOE N3DEJNE

SAMMANFATTNING AV GARANTIN

UPORABA VASENAPRAVE DYSON

PROSIMO VAS, DA PRED NADALJEVANJEM PREBERETE "POMEMBNA VARNOSTNA NAVODILA" V TEM DYSONOVEM PRIROCNIKU ZA UPORABO.

NEGA VASE NAPRAVE DYSON

Model Identifier: HP00
Item	Symbol	Value	Unit		Item	Unit
Heat output					Type of heat input, for electric storage local space heaters only
Nominal heat output	Pnom	2.1	kW		manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	Pmin	2.1	kW		manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	Pmax,c	2.1	kW		electronic heat charge control with room and/or outdoor temperature feedback	No
Auxiliary electricity consumption					fan assisted heat output	Yes
At nominal heat output	eI max	2.1	kW		Type of heat output/room temperature control
At minimum heat output	eI min	2.1	kW		single stage heat output and no room temperature control	No
In standby mode	els8	<0.5	W		Two or more manual stages, no room temperature control	No
					with mechanic thermostat room temperature control	No
					with electronic room temperature control	Yes
					electronic room temperature control plus day timer	No
					electronic room temperature control plus week timer	No
					Other control options (multiple selections possible)
					room temperature control, with presence detection	No
					room temperature control, with open window detection	No
					with distance control option	No
					with adaptive start control	No
					with working time limitation	Yes
					with black bulb sensor	No
Contact details		Dyson Technology Limited Tetbury Hill, Malmesbury, SN16 0RP, United Kingdom Tel [phone]

UK

Dyson Customer Care

[e-mail]

0800 298 0298

Dyson Technology Limited, Tetbury Hill, Malmesbury,

Wiltshire, SN16 ORP

ROI

Dyson Customer Care

[e-mail]

014757109

Dyson Ireland Limited, Office 2, Central Park,

Leopardstown, Dublin 18, Ireland

AT

Dyson Kundendienst

[e-mail]

0800 88 66 73 42

Aradhippou Industrial Estate, Larnaka 7100, Cyprus

PO Box 41070

CZ

Burotek sarl (Member of Antaki Group)

[e-mail]

01-252474

Moutran Bldg., Sin El Fil Boulevard, P.O.Box: 90-720

Beirut

LT

Dyson servitas

[e-mail]

870055595

Baltic Continent, UAB Luksio g. 23, Vilnius, Lietuva

MA

IDEAPLUS SARL

[e-mail]

0801 001 424

18 Rue Sidi Bennour, Quartier Ain Borja, Casablanca,

Maroc

NL

Dyson Helpdesk

[e-mail]

0800 020 6203

Dyson BV, Fred. Roeskestraat 109, 1076 EE Amsterdam,

Nederland/The Netherlands

NO

Dyson Kundeservice

[e-mail]

080069196

CPM International Telebusiness SL, Edificio Ono,

Carrer de Lepant 350, Planta 1a, 08025 Barcelona, Spain

PL

Tudortech, 4th floor Park On Long, 66 Long Street

Cape Town, 8001, South Africa