PERFECT MIX COOK LM835D10 - Robots de cuisine MOULINEX - Free user manual and instructions

USER MANUAL PERFECT MIX COOK LM835D10 MOULINEX

PROGRAM MILKSHAKE PROGRAM SMOOTHIE PROGRAM DESSERT ICE CRUSH PROGRAM COMPOTE PROGRAM HOT SAUCE PROGRAM MULTI GRAIN MILK PROGRAM STIR PROGRAM CHUNKY SOUP PROGRAM SMOOTH SOUP MANUAL BLEND PULSE START AND STOP PROGRAM CLEAN MANUAL HEATING / STEAM* - BUTTON

+ BUTTON C Ref. 8020006581-03

ASSEMBLING THE JAR Clic

HOW TO ADD STEAM BASKET (*depending on model part)

for cold preparation

1750ml for thick mixture 1250 for liquide mixture max

1400ml for hot preparation max

D2. Panel E. *STEAM BASKET F. Cup G. Brush

* Depending on model

CAUTION: The safety precautions are part of the appliance.

Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on. The appliance will only start if the jug is correctly positioned on the motor unit (D) and the lid locked on the jug. BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME • Before using your appliance for the first time, rinse the parts that come into contact with food (jug, lid and measuring cap) with soapy water CAUTION : Do not immerse the appliance in water (neither the motor unit nor the jug base). Never put the motor unit (D) under running

water. Clean with a damp cloth and dry it carefully.

The blades are extremely sharp and removable. • Make sure all the packaging has been removed before operating the appliance.

USING YOUR APPLIANCE

• Put the appliance on a flat, stable, heat-resistant surface away from sources of heat or water splashes. • Add the ingredients into the assembled jug without exceeding the maximum level indicated: -

1750 ml max for cold thick mixture and

1250ml max for cold liquid mixture

1400 ml max for hot preparation

• Lock the lid on the jug by rotating it and place the lid cap in position on the lid.

The appliance only starts up once the jug and lid are correctly in place. • Plug in the blender. The product makes a beep and the screen lights up. • The product will be immediatly in standby mode. At this stage you can select a program by pressing the right program on the screen with your finger. The led will turn on on the selected program. The recipe time information will be displayed. • Press the start/stop button. Then the appliance starts to work automatically.

500 ml max of water for steam program

AUTOMATIC FUNCTION: How to use :

CAUTION : We recommend not to add ingredients while blending hot preparations. (risk of splashing). Do not remove the lid cap from the lid during hot preparations. It can reach high temperature and cause burns.

• Do not shake the motor unit or the jug when the blender is in use. CAUTION: After running one program, especially long recipe, let the blender rest for minimum 5 minutes before operating it again. Do not insert any metallic object into the blender. Do not mix pieces of frozen ingredients larger than 25x25x25mm.

• At the end of the recipe, the blender stops automatically. The appliance bips 5 times.

• You can also stop the blending during the cycle: - within 1 minute of working, press the start/stop button - more than 1 minute of working, press and hold the start/stop button for 3 seconds • ­­­­To add ingredients while blending for cold preparation only, remove the lid cap from the lid and add the ingredients through the feeder hole. Beware of the risk of spatter. Cold Programs Milk shake

250g vanilla ice cream + 1 banana (100g) + 25 cl milk

Select Milkshake program

Press Start/Stop button

200g carrots, 100g celeriac, 100g banana, 500g orange juice

Select Smoothie program

Press Start/Stop button Select Ice crush program Press Start/Stop button

8 Ice cubes 30x30x40 mm

Quick cake: (Add ingredient in order)

3 eggs, 100g sunflower oil, Select Dessert program 210g sugar, 7.5g vanilla sugar, Press Start/Stop button 6g baking powder, 125g flour

Bake for 40min to 180°C These programs are predifined on a standard basis. You can freely add extra heating/blending thanks to the manual settings at your convenience.

Hot Programs Smooth soup

600g pumpkin, 120g potato, 80g onion, 600g water.

Press Start/Stop button

300g potatoes, 150g carrots, 150g leek, 100g onion, 700g water.

Select Chunky soup program

Press Start/Stop button

700g golden apple, 50g water.

Select Compote program

Press Start/Stop button

First step 900g chicken stock + ginger Second step 80g pasta + 100g carrot + 100g celeriac Third step 120g chicken + 100g celery + soya sauce

Press Start/Stop button When the beep sounds, add the ingredients from step 2 for 5 minutes When the beep sounds, add the ingredients from step 3 for 5 minutes

1000g water, 100g soya beans

Select Multigrain milk program

Press Start/Stop button

500g milk, 45g butter, 45g flour, nutmeg (1 pinch)

Select Hot sauce program

Press Start/Stop button

400 g max of ingredients

EN Select steam program long pause on the button (2s)

Press Start/Stop button

ROUGH CHOPPING SMALL QUANTITIES Chop in a few seconds by pulsing: peanuts

Model 1400 WATT: quantity / max time :300g of peanuts / 15 seconds - t o ensure the pasteurization of vegetables: wait until the temperature reaches 65°C during at least 2min at core of the food. - t o ensure the pasteurization of fish and seafood wait until the temperature reaches 65°C during at least 2min at core of the food. /!\ Warning: Sensitive people like pregnant women, young children, elderly people and immunocompromised people must take into acount that some of the recipes suggested don’t cook the ingredient thoroughly enough to kill food poisoning bacteria.

COOKING FOOD To ensure the food is cooked thoroughly and to avoid any type of bacteriological contamination a minimum temperature and time have to be respected depending on the type of food:

- t o ensure the pasteurization of beef, pork and poultry: wait untill temperature reaches 75°C during at least 2min at core of the food. - t o ensure the pasteurization of eggs: wait until the temperature reaches 75°C during at least 2min at core of the food.

ore than 1 minute of working, press and

-m hold the start/stop button for 3 seconds.

Pulse: Press the pulse button to • let the appliance run for only a few seconds at a time. To stop it, release the button. Press the pulse button as often as it is necessary. The longest working time can not be more than 3 minutes. Blend: select blend program on • screen then choose the speed setting with + and – buttons, validate with Start/Stop button. Then choose timer, default time 2 min and adjut with + and – buttons, validate with Start/Stop button the programm will start immediatly. At the end of the program, the appliance bips 5 times. Heat : allows to freely control • the way you want to heat. Press the heat button, the screen indicates « 75° » but you can choose the heating temperature from 40° up to 100° by selecting + and – buttons. Then press Start/Stop button. You can set up the working time by selecting + and - buttons between 5 minutes and 90 minutes, the screen indicate default time : 10 minutes. Then, press Start/Stop button. The remaining time appears on the screen. Wait for the blender to stop automatically. The appliance beeps 5 times. You can also stop the blending during the cycle : -w ithin 1 minute of working, press the start/stop button

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?

Steam*: Add the ingredients in the steam basket. Add 500ml of water in the jar. Then add the steam basket in the jar and close the lid. Maintains heat /steam button for 2 seconds. The pictogram will become yellow You can set up the working time by

+ and -buttons, between 5 minutes and 90 minutes. Then press Start/Stop button. The remaining time appears on the screen. Wait for the blender to stop automatically, The appliance bips 5 times. For safety reasons, remove the cap and wait 1 minute to remove excess steam. *Depending on model OTHER FUNCTIONS • Start/Stop : allows to stop any blending or heating program before the end by pressing this button.You can also stop the blending during the cycle : - within 1 minute of working, press the start/stop button - more than 1 minute of working, press and hold the start/stop button for 3 seconds If the appliance switches off during operation, proceed as follows : - Unplug and leave it to cool down for approximately 15-20 minutes. - Reconnect the appliance to the power supply and resume blending. - The appliance will keep the program in memory for 3min if stopped.

Appliance does not work

The appliance stopped while in use

Excessive vibrations

• Use a damp cloth to clean the motor Unit. Dry it carefully. • You can use the brush to clean the blade holder. Be careful, the blades are very sharpened. Caution: • Empty the preparation, the jug is not meant for storing food in the refrigerator or freezer. • To clean the outside of the motor unit and the walls of the jug, use a damp cloth. • Do not immerse the appliance in water (neither the motor unit nor the blade holder). Never put the motor unit (D) under running water. • Refer to the cleaning table to check how to clean each part.

•C lean the jug immediately after use.

• F or easy cleaning, you can use. Deep clean: Put 800ml of water in the jug. Select the cleaning program on the screen and press Start/Stop button Wait for the end of program. Finish cleaning the jug with the help of a sponge. •R inse the inside of the jug and the lid under running water. inse the inside of the jug and the lid •R under running water. • In the event of the heated part of the jug getting extremely dirty, fill in the jar with a mix of water and washing up liquid and let it soaked for a few hours to help get it clean.

Leak or overflow from the lid

The plug is not connected.

Connect the appliance to a socket with the same voltage as indicated on the rating plate of the appliance.

The blender jug is not positioned correctly on the motor unit or the jug and lid are correctly in place and are not locked onto the motor unit.

Check that the blender jug and the lid are positioned properly on the motor unit as explained in the instructions.

Appliance, keypboard or program not responding

Unplug the appliance, wait for

1 minute and plug in again.

In case of overheating

Unplug and leave it to cool down for approx.15-20 minutes.

Overload or overheating

Unplug and leave it to cool down for approx.15-20 minutes.

Reconnect the appliance to the power supply and resume blending.

The product is not placed on a Place the appliance on a flat flat surface. surface.

Volume of ingredients is too high.

Reduce the quantity of ingredients processed.

Volume of ingredients is too high.

Reduce the quantity of ingredients processed.

The lid is not correctly positioned.

The seal of the lid is not correctly positionned, or is missed.

Put the seal in the correct position.

Leak from the bottom of Deterioration of the watertightness of the the blender jug appliance.

verify the blade holder is correctly put in place and the interface between blade holder / jug is totally clean.

If the problem persists, contact the consumer service (see contact information in the warranty leaflet)

The blades do not turn easily

Pieces of food too large or too hard.

Reduce the size or quantity of ingredients processed.

The food is not cooked enough use manual function to adapt time of use and heating or / The food is overcooked temperature

Cooking problem Food sticks to the bottom

use manual function to adapt time of use and heating temperature. And see cleaning instructions

If your appliance is still not running properly, please contact the customer service department for your country.

FR Surcharge ou surchauffe

700 g Jonagold-appels, 50 g water.

WAT TE DOEN ALS UW APPARAAT NIET WERKT?