Q: Which accessory to use for mixing flour and eggs with the MASTERCHEF 370?

To mix flour and eggs with your MASTERCHEF 370 , use the following combination: The metal knife (C1) combined with the Spiral System (F1) - this combination is specially designed for mixing liquid preparations and light doughs (cookies, pound cakes, etc.). Maximum capacity: 0.8 liters. The emulsifying disc (E1) with the whisk (D1) - if you also need to whip the eggs before mixing them with the flour. Do not use the pusher while whipping so that the eggs are properly aerated. Maximum duration: 4 minutes. These accessories will allow you to easily prepare your cake and cookie dough with your robot.

Q: How to grate carrots with the MASTERCHEF 370?

Accessories to use Use the C blade (Coarse grater) for a thick texture or the A blade (Fine grater) for a tighter texture, depending on your preference. Installing the accessory Insert the chosen blade into the blade holder disc Engage the drive tube in the center of the disc Lock the assembly by turning it a quarter turn Place everything on the central axis of your MASTERCHEF 370 bowl Usage and quantities Prepare a maximum of 500 g of carrots at a time. Guide them through the chute using only the provided pusher - never use your fingers. Essential safety instructions The blades are extremely sharp - handle them with care Always remove the blades before emptying the bowl In case of discoloration of the accessories, rub them with a cloth soaked in cooking oil

Question 1

Which accessory to use for mixing flour and eggs with the MASTERCHEF 370?

Accepted Answer

To mix flour and eggs with your MASTERCHEF 370, use the following combination:

The metal knife (C1) combined with the Spiral System (F1) - this combination is specially designed for mixing liquid preparations and light doughs (cookies, pound cakes, etc.). Maximum capacity: 0.8 liters.
The emulsifying disc (E1) with the whisk (D1) - if you also need to whip the eggs before mixing them with the flour. Do not use the pusher while whipping so that the eggs are properly aerated. Maximum duration: 4 minutes.

These accessories will allow you to easily prepare your cake and cookie dough with your robot.

Question 2

How to remove the knife from the Moulinette DPA1G?

Accepted Answer

To remove the knife from your Moulinette DPA1G, follow these simple steps:

Unplug the device from the electrical outlet and wait for it to come to a complete stop.
Locate the blade holder in the bowl of the moulinette.
Unscrew the holder by turning counterclockwise until it completely detaches.

Important warnings:

The blades are very sharp - do not touch the cutting edges during handling.
Always unplug the device before removing or handling the knife.
Children should not handle the assembly or disassembly of the blades due to the risk of cuts.

Question 3

Why is the water flow of my MOULINEX FG370800 coffee maker very low?

Accepted Answer

If the water flow of your MOULINEX FG370800 coffee maker is very low, descaling is usually the solution. Your device accumulates limescale over time, which reduces the flow. Here’s how to proceed:

Descaling Procedure

Recommended frequency: Descale your coffee maker every month or every 40 cycles of use
Product to use: Use either a special descaler or 2 cups of diluted white vinegar
Steps:
- Pour the descaling product into the reservoir (capacity 1.25 L)
- Turn on the coffee maker without coffee
- Let it run for the equivalent of one cup, then stop
- Let it sit for 1 hour
- Continue the cycle and rinse 2 to 3 times with fresh water

Important: Failure to descale regularly may void your warranty. If the flow remains very low after descaling, there may be another issue affecting your device - consult an authorized repair center.

Question 4

How to disassemble the bowl of the Moulinette?

Accepted Answer

Here are the instructions for disassembling the different bowls of your MOULINEX Moulinette:

Chopper bowl

To remove the knife from the chopper bowl, make slight rotational movements while holding it by its upper part, then pull it upwards while holding the bowl with the other hand.

Blender bowl (1.5 L)

Wait for the blades to come to a complete stop before removing the bowl from the motor unit. This ensures your safety.

Coffee/spice grinder

Unlock the grinder by turning it to the left while holding the lid with the other hand.

Important safety tip: Before disassembling any bowl, always ensure that all moving parts have completely stopped rotating. This rule is essential for your safety.

Question 5

How to grate carrots with the MASTERCHEF 370?

Accepted Answer

Accessories to use

Use the C blade (Coarse grater) for a thick texture or the A blade (Fine grater) for a tighter texture, depending on your preference.

Installing the accessory

Insert the chosen blade into the blade holder disc
Engage the drive tube in the center of the disc
Lock the assembly by turning it a quarter turn
Place everything on the central axis of your MASTERCHEF 370 bowl

Usage and quantities

Prepare a maximum of 500 g of carrots at a time. Guide them through the chute using only the provided pusher - never use your fingers.

Essential safety instructions

The blades are extremely sharp - handle them with care
Always remove the blades before emptying the bowl
In case of discoloration of the accessories, rub them with a cloth soaked in cooking oil

Question 6

Should I remove the rubber covers from the E connectors of the Moulinex Easy Soup LM841B?

Accepted Answer

No, you should not remove the rubber covers from the E connectors. These elements are integral protective seals of the locking and electrical connection system of your Moulinex Easy Soup LM841B.

When assembling, you simply need to ensure that the two connectors (D and E) are properly aligned when repositioning the motor block onto the bowl. These rubber covers ensure:

Correct sealing between the motor block and the bowl
A safe and reliable electrical connection
No liquid leakage during operation

If these rubber covers are dirty, simply clean them with a damp sponge while cleaning your appliance. If they are damaged or if the appliance no longer seals properly even after aligning the connectors and cleaning, contact the authorized technical service for a replacement of the seals.

Question 7

What are connectors D and E of the Moulinex Easy Soup LM841B and what are they for?

Accepted Answer

Connectors D and E are the two essential junction points between the motor block and the bowl of your Moulinex Easy Soup LM841B:

Connector D: located on the motor block (upper part)
Connector E: located on the bowl (lower part)

These connectors serve two important functions:

Electrical transmission: they transmit electrical power from the motor block to the blades and the heating system
Safety locking: they ensure that the device is properly assembled before operation

Before plugging in your device, always check that both connectors D and E are properly aligned during assembly. Note that connector E is covered with protective rubber that forms integral seals of the system - do not remove them.

Question 8

How to check if the lid of the Moulinex Easy Soup LM841B is properly closed?

Accepted Answer

To check if the lid of the Moulinex Easy Soup LM841B is properly closed and locked correctly, here are the points to verify:

Alignment of connectors D and E: This is the main indicator. When repositioning the motor block on the bowl, ensure that the two connectors (recesses) marked D and E are properly aligned. Correct alignment ensures secure locking.
Motor block locked: The motor block must be stable and well positioned on the bowl. It should not move or become misaligned when assembling.
Device on a flat surface: Place the assembled device on a stable surface and check that it rests flat, without tilting.

If the lid (motor block) does not seem to be properly locked or if the device tilts, check the alignment of connectors D and E before plugging in the device. Never start a program if the motor block is not completely locked onto the bowl.

Question 9

How to make mayonnaise with the MOULINEX PerfectMix LM88A8?

Accepted Answer

The MOULINEX PerfectMix LM88A8 does not have a button or special function dedicated to mayonnaise. However, thanks to its 2 speeds and pulse function, it is perfectly suited for making homemade mayonnaise.

Steps to successfully make your mayonnaise:

First, pour the liquid ingredients (egg yolk, mustard, vinegar) into the mixing bowl - this is essential for proper emulsification
Use the pulse function for precise control of the mixing
Add the oil drop by drop while activating the pulse in regular bursts
Gradually increase the oil flow once the mayonnaise starts to thicken
Ensure that the filling level does not exceed the maximum indicated

The pulse function allows you to gradually emulsify the ingredients and achieve a smooth and homogeneous mayonnaise. Start with a low speed and feel free to pause to check the consistency.

Question 10

The buttons are unresponsive and flashing lights appear on the Moulinex EZ3018

Accepted Answer

If the buttons on your Moulinex EZ3018 fryer are unresponsive and flashing lights appear, this indicates a security lock or an alert condition.

Most Likely Causes

Poorly inserted lid or basket: The fryer has safety sensors that automatically block the controls if the lid is not properly closed or if the basket is not in place. The flashing lights indicate this security lock.
Temporary overheating: If the appliance has reached an excessive temperature, the electronics will put it in a safe hold. The buttons remain locked until the temperature returns to normal.
Preheating cycle: Upon startup, the Moulinex EZ3018 goes through a preheating phase up to 200°C. During this phase, some controls may be temporarily disabled.

What to do

Turn off the appliance by unplugging it.
Check that the lid closes without resistance.
Ensure that the basket is fully inserted into the fryer.
Wait 10-15 minutes for the appliance to cool down.
Plug it back in and restart the appliance. The flashing lights should disappear and the buttons should become active again.

If the problem persists after these steps, there may be a malfunction of the safety sensor or the internal electronics. Contact Moulinex for a complete diagnosis.

User manual MOULINEX : user manuals and guides in PDF

Models MOULINEX most viewed

Browse manuals MOULINEX by appliance type

Recent questions about devices MOULINEX