How to ensure that the MOULINEX DJ753E10 FRESH EXPRESS electric grater stays securely in place?

Question

Accepted Answer

To ensure that your MOULINEX DJ753E10 FRESH EXPRESS electric grater stays securely in place, several essential points must be followed:

Correct positioning of the cone holder and cones
The crucial point is to ensure that the cone is correctly positioned all the way down into the holder (fig. 3). Place the chosen cone into the opening at the front of the holder and check that it is properly engaged. Then, start the product before introducing food to allow the cone to lock in place. If you do not hear a "click", it means the cone is not correctly positioned: reposition it all the way down until the click occurs.

Installation of the holder on the motor block
The cone holder (D) must be positioned on the motor block (A) by making a quarter turn to the left. You will notice that it is quite resistant to installation when the device is new, which is normal. Over time, this maneuver will gradually become easier to perform.

Stable working surface
Place the device on a stable work surface and away from water splashes. A flat and non-slip surface ensures better stability during operation.

Correct usage during operation
When grating, do not press hard on the pusher, as excessive pressure would slow down the motor and destabilize the device. Just lightly hold the food in contact with the cone. Always use the provided pusher and never place your hands directly in contact with the moving blades or cones.

User manual MOULINEX Electric grater : user manuals and guides in PDF

Models MOULINEX Electric grater most viewed

Other categories MOULINEX

Recent questions about Electric grater MOULINEX