MMB6384M - MMB6384M--B - Blender BOSCH - Free user manual and instructions

USER MANUAL MMB6384M - MMB6384M--B BOSCH

Register yo new devic ur e on MyBosch now and get free b enefits: bosch-h ome.com / welcome

Safety 29 General information 29 Intended use 29 Restriction on user group 30 Safety instructions 30 Avoiding material damage 33 Environmental protection and saving energy 33 Disposing of packaging 33 Unpacking and checking 33 Unpacking the appliance and parts 33 Scope of delivery 33 Setting up the appliance 33 Familiarising yourself with your appliance 34 Appliance 34 Symbols 34 Rotary switch 34 Programme buttons 34 Safety systems 35 Before using for the first time 35 Cleaning the appliance and parts 35 Basic operation 35 Cable length 35 Recommended speeds 35 Using the blender to process food 35 Using instantaneous switching 36 Using programmes 36 Pushing down food for processing 37 Adding more ingredients 37 Emptying the blender jug 37 Processing food using the ToGo blender jug 37 Closing the To-Go blender jug 38 28

Cleaning and servicing 38

Dishwasher-safe components 38 Cleaning products 38 Cleaning the base unit 38 Cleaning the blender 39 Cleaning the To-Go blender jug and To-Go blade insert 39 Using the cleaning programme 39 Recipes 40 Overview of recipes 40 Troubleshooting 41 Malfunctions 41 Transportation, storage and disposal 43 Disposing of old appliance 43 Customer Service 43 Product number (E-Nr.) and production number (FD) 43 Warranty conditions 43

Please read the safety information to ensure that you use the appliance safely. General information You can find general information for this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡ This manual is intended for the user of the appliance. ¡ Follow the safety instructions and warnings. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Check the appliance after unpacking it. Do not connect the appliance if it has been damaged in transit. Intended use Please read the information on intended use to ensure that you use the appliance correctly and safely. Only use this appliance: ¡ As specified in this instruction manual. ¡ With genuine parts. ¡ For cutting up, chopping, mixing, puréeing and emulsifying liquid or semi-solid food. ¡ For crushing ice cubes. ¡ Under supervision. ¡ In private households and in enclosed spaces in a domestic environment at room temperature. ¡ for normal processing quantities and for normal processing times for domestic use. ¡ Up to an altitude of max. 2000 m above sea level. Disconnect the appliance from the power supply when: ¡ are not using the appliance. ¡ the appliance is unattended. ¡ assembling the appliance. 29

taking the appliance apart. cleaning the appliance. approaching rotating parts. confronted with a fault.

Restriction on user group

Avoid risks to children and vulnerable persons. This appliance can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be performed by children. The appliance must not be used by children. Keep children away from the appliance and power cable. Safety instructions Observe the safety instructions. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured surface. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box. ▶ "Call Customer Service." → Page 43 ▶ Repairs to the appliance should only be carried out by trained specialist staff. ¡ Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. 30

¡ Incorrect repairs are dangerous.

▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk. ¡ An ingress of moisture can cause an electric shock. ▶ Never immerse the appliance or the power cord in water or clean in the dishwasher. ▶ Only use the appliance in enclosed spaces. ▶ Never expose the appliance to intense heat or humidity. ▶ Do not use steam- or high-pressure cleaners to clean the appliance. ¡ If the insulation of the power cord is damaged, this is dangerous. ▶ Never let the power cord come into contact with hot appliance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges. ▶ Never kink, crush or modify the power cord. WARNING ‒ Risk of fire! Intense heat may cause the appliance and other parts to catch fire. ▶ Never place the appliance on or near hot surfaces. WARNING ‒ Risk of scalding! Hot food may splash out during processing and steam can escape from the lid. ▶ Add a maximum of 750 ml of hot or frothing food. ▶ Process hot food carefully. ▶ Do not lean over the appliance. ▶ Do not process food that is hotter than 50 °C in the To-Go blender jug.

WARNING ‒ Risk of injury!

¡ Operating the appliance with damaged parts may result in injury. ▶ Parts which show cracks or other damage or do not fit correctly must be replaced with genuine spare parts. ¡ Improper use may cause injuries. ▶ Only use the appliance once it is fully assembled. WARNING ‒ Risk of cutting! The blender knife has sharp blades. ▶ When cleaning and emptying the blender jug, watch out for the sharp blades. ▶ Never touch the edges of the blades with bare hands. WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children. ▶ Do not let children play with packaging material. ¡ Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. WARNING ‒ Risk of harm to health! Soiling on surfaces may be harmful to health. ▶ Follow the cleaning instructions. ▶ Clean surfaces which come in contact with food before each use.

Avoiding material damage en

Avoiding material damage

Avoiding material damage

Follow these instructions to prevent material damage to your appliance, accessories or other objects in your kitchen.

Unpacking the appliance and parts

1. Take the appliance out of the

Avoiding material damage

Improper use may cause material damage. ▶ Do not operate the appliance at no-load. ▶ Observe the maximum processing quantities. ▶ Never use the blender jug in the microwave or oven. ▶ Do not use the blender jug to store objects which do not belong to it.

2. Take all other parts and the ac-

companying documents out of the packaging and place them to hand.

3. Remove any packaging material. 4. Remove any stickers or film.

After unpacking all parts, check for any damage in transit and completeness of the delivery. → Fig. 1

A B Environmental protection and saving energy

Environmental protection and saving energy

C D E F G Help protect the environment by using your appliance in a way that conserves resources and by disposing of reusable materials properly.

Environmental protection and saving energy

Disposing of packaging

The packaging materials are environmentally compatible and can be recycled. ▶ Sort the individual components by type and dispose of them separately. Information about current disposal methods are available from your specialist dealer or local authority.

Blender jug with EasyClick blade insert Lid and measuring cup Pusher To-Go blender jug with blade insert1 Lid with closable mouthpiece1 Instruction manual

Depending on the appliance specifications

Setting up the appliance

WARNING Risk of fire! Intense heat may cause the appliance and other parts to catch fire. ▶ Never place the appliance on or near hot surfaces. 1. Place the appliance on a stable,

Unpacking and checking

Unpacking and checking

Find out here what you need to note when unpacking the appliance. Unpacking and checking

level, clean and flat work surface.

2. Pull the power cable out to the re-

→ "Cable length", Page 35 33

en Familiarising yourself with your appliance

Do not insert the mains plug.

Familiarising yourself with your appliance

Familiarising yourself with your appliance

You can find an overview of the symbols used on your appliance here. Symbol

Familiarise yourself with the parts of your appliance.

Familiarising yourself with your appliance

Open locking mechanism.

Close locking mechanism.

You can find an overview of the parts of your appliance here. → Fig. 2

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1

The rotary switch is used to start and stop processing and select the speed.

Programme buttons with LEDs

Scale Lock indicator for the lid Status display (LED) Spout Measuring cup Lid with filling opening Blender jug EasyClick blade insert Retaining bracket Power cord storage compartment To-Go blade insert1 To-Go blender jug1 Lid with closable mouthpiece1 Pusher

Depending on the appliance specifications

Stop processing. Switch on the appliance. Process ingredients at low speed. Process ingredients at maximum speed. Process ingredients briefly at maximum speed.

Tip: You can adjust the speed steplessly between and

You can use the programme buttons to start the programmes for specific use cases or precleaning. Each programme button has a corresponding LED, which shows the operating status. Note: When the To-Go blender jug is attached, only use the programme. The and programmes are not suitable for the ToGo blender jug. Programme button

Cleaning programme for precleaning when food residue has dried in

Before using for the first time

Programme for preparing smoothies Programme for crushing ice cubes

You can find an overview of your appliance's safety systems here. Start lock-out Start lock-out prevents your appliance from being switched on accidentally. You can switch on and operate the appliance once the blender jug has been correctly positioned and the lid is locked. Overload protection The overload protection system prevents the motor and other components from being damaged through being overloaded. Before using for the first time

Before using for the first time

Configure the basic settings. Clean the appliance and accessories. Before using for the first time

Cleaning the appliance and parts

1. Clean all parts that come into con-

tact with food before using for the first time.

→ "Cleaning and servicing", Page 38 2. Put the cleaned and dried parts out ready for use.

You can find out everything you need to know about operating your appliance here. Basic operation

Adjust the length of the power cable to your needs. Adjusting cable length via cable storage compartment 1. Pull the power cable out to the required length. 2. To shorten the cable, push it into the cable storage compartment.

You can find out here which speeds you can use to achieve optimal results. Setting

Briefly blending food with instantaneous switching at maximum speed. Blending, puréeing, emulsifying, frothing and cutting up food. Blending food that should not be cut up too small.

Tip: Please use our recipe suggestions to gain experience with your new appliance.

→ "Overview of recipes", Page 40

Using the blender to process food

WARNING Risk of injury! Improper use may cause injuries. ▶ Only use the appliance once it is fully assembled.

WARNING Risk of scalding!

Hot food may splash out during processing and steam can escape from the lid. ▶ Add a maximum of 750 ml of hot or frothing food. ▶ Process hot food carefully. ▶ Do not lean over the appliance. 1. Prepare the food.

For example, cut up large items of food.

2. Turn the blender jug upside down. 3. Open the retaining bracket. → Fig. 3 4. Align the EasyClick blade insert with the tap in the blender jug. 5. Push the EasyClick blade insert into the blender jug and close the retaining bracket until it clicks into place. → Fig. 3 6. Place the blender jug onto the base unit and rotate in a clockwise direction until it locks into place. → Fig. 4 7. Add the food to the blender jug. → Fig. 5 Observe the minimum and maximum processing quantities. → "Overview of recipes", Page 40 8. Insert the measuring jug in the lid and place the lid on the blender jug. → Fig. 6 The and markings must match up. 9. Turn the lid in the direction until it clicks into place. → Fig. 7 The lid must be completely closed. a The colour of the lock indicator for the lid changes from red to green. 10. Insert the mains plug.

11. Set the rotary switch to

→ Fig. 8 a The status display (LED) on the rotary switch lights up. 12. Set the rotary switch to the recommended speed. → Fig. 9 13. Process the ingredients until you achieve the required result. 14. To end the operation, set the rotary switch to ⁠.

Using instantaneous switching

1. Set the rotary switch to

→ Fig. 10 a The ingredients are processed at maximum speed. 2. Release the rotary switch. a The rotary switch jumps to ⁠. a Processing stops.

Requirements ¡ The blade insert is installed. ¡ The blender jug has been attached and locked. ¡ The blender jug is filled with the food or ice cubes. ¡ The lid is attached and locked. ¡ The rotary switch is set to ⁠. 1. Set the rotary switch to ⁠. → Fig. 8 a The status display (LED) on the rotary switch lights up. 2. Press the or programme button. → Fig. 11 a While the programme is running, the LED for the selected programme lights up and the status display (LED) goes out. 3. Wait until the appliance stops.

4. Set the rotary switch to ⁠.

Tip: To prematurely stop the programme, set the rotary switch to ⁠. 5. "Empty the blender jug." → Page 37

processed food, use the spout.

‒ Open the spout. ‒ Place the processed food in a suitable container or serve immediately. ‒ Close the spout. → Fig. 17 3. To pour out all of the processed food, remove the lid. → Fig. 18

Pushing down food for processing

1. Remove the measuring jug and in-

sert the pusher into the filling opening.

→ Fig. 13 2. Push down the food from the sides of the blender jug. → Fig. 13

Adding more ingredients

1. During processing, remove the

measuring jug and add the ingredients through the opening in the lid.

→ Fig. 14 To add larger quantities, set the rotary switch to ⁠. Wait until the appliance stops. Turn the lid in the direction and remove it. → Fig. 15 Add the ingredients. → Fig. 15 Place the lid on the blender jug again and continue to process the ingredients.

Emptying the blender jug

Requirement: The appliance has stopped. 1. Turn the blender jug anti-clockwise and remove it from the base unit. → Fig. 16

Processing food using the ToGo blender jug

WARNING Risk of scalding! Hot food may splash during processing and scald you. ▶ Do not process food that is hotter than 50 °C in the To-Go blender jug. 1. Prepare the food.

For example, cut up large items of food.

Add the food to the To-Go blender jug. → Fig. 19 Observe the minimum and maximum processing quantities. → "Overview of recipes", Page 40 Place the To-Go blade insert on the To-Go blender jug. → Fig. 19 Screw the To-Go blade insert and the To-Go blender jug in tightly. → Fig. 20 The To-Go blade insert can only be connected to the base unit when the To-Go blender jug is fully screwed on. Turn the To-Go blender jug upside down. → Fig. 21

en Cleaning and servicing

6. Place the To-Go blade insert on

the base unit and rotate in a clockwise direction until it locks into place.

→ Fig. 21 7. Set the rotary switch to the recommended speed. → Fig. 22 Tip: Processing can also take place with instantaneous switching. → "Using instantaneous switching", Page 36 8. Process the ingredients until you achieve the required result. 9. To end the operation, set the rotary switch to ⁠. → Fig. 23

Closing the To-Go blender jug

Requirement: The appliance has stopped. 1. Turn the To-Go blender jug anticlockwise and remove it from the base unit. → Fig. 24 2. Turn the To-Go blender jug and unscrew the To-Go blade insert. → Fig. 24 3. Close the mouthpiece on the lid. → Fig. 25 4. Screw the lid and the To-Go blender jug in tightly. → Fig. 25 Cleaning and servicing

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. Cleaning and servicing

Dishwasher-safe components

Find out here which components can be put in the dishwasher. 38

Some parts may be damaged if they are put in a dishwasher. ▶ Only put dishwasher-safe parts in the dishwasher. ▶ Only use programmes that do not heat the water above 60 °C. ▶ Do not wedge plastic parts in the dishwasher. This overview describes the cleaning process for the components. → Fig. 26

Find out here which cleaning products are suitable for your appliance. ATTENTION! Using unsuitable cleaning agents or incorrect cleaning may damage the appliance. ▶ Do not use cleaning agents containing alcohol or spirits. ▶ Do not use sharp, pointed or metal objects. ▶ Do not use abrasive cloths or cleaning agents.

Cleaning the base unit

WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. ▶ Never immerse the appliance or the power cord in water or clean in the dishwasher. ▶ Do not use steam- or high-pressure cleaners to clean the appliance. ▶ Wipe down the base unit with a

Cleaning and servicing

Cleaning the blender

2. Turn the lid anti-clockwise and re-

WARNING Risk of cutting!

The blender knife has sharp blades. ▶ When cleaning and emptying the blender jug, watch out for the sharp blades. ▶ Never touch the edges of the blades with bare hands.

Using the cleaning programme

The blender knife has sharp blades. Improper handling may damage the blades or the surface. ▶ Never set the blade insert down with the blade facing downwards. 1. Remove the measuring jug.

and remove it from the base unit.

→ Fig. 28 Turn the blender jug upside down. Open the retaining bracket. → Fig. 29 Remove the EasyClick blade insert from the blender jug. → Fig. 29 Clean the components.

Cleaning the To-Go blender jug and To-Go blade insert

ATTENTION! The blender knife has sharp blades. Improper handling may damage the blades or the surface. ▶ Never set the blade insert down with the blade facing downwards. 1. Turn the To-Go blade insert anti-

clockwise and remove it from the

To-Go blender jug. → Fig. 30

move it from the To-Go blender jug.

→ Fig. 31 3. Open the mouthpiece on the lid. → Fig. 31 4. Clean the components.

You can use the cleaning programme to preclean the blender jug and the blade insert.

Requirements ¡ The blade insert is installed. ¡ The blender jug has been attached and locked. ¡ The blender jug is filled with cleaning fluid. → "Overview of recipes", Page 40 ¡ The lid is attached and locked. ¡ The rotary switch is set to ⁠. 1. Set the rotary switch to ⁠. → Fig. 8 a The status display (LED) on the rotary switch lights up. 2. Press the programme button . → Fig. 11 a While the programme is running, the LED for lights up and the status display (LED) goes out. 3. Wait until the appliance stops. 4. Set the rotary switch to ⁠. 5. Turn the blender attachment anticlockwise and remove it from the base unit. → Fig. 16 6. Turn the lid in the direction and remove it. → Fig. 32 7. Dispose of the cleaning fluid. a The most stubborn food residues are removed. 8. Clean the components.

You can find a selection of recipes specially developed for your appliance here. Recipes

This overview lists the ingredients and processing steps for various recipes. → Fig. 33 Recipe Sports drink

Using unsuitable food may damage the appliance. ▶ Do not process food that is hotter than 50 °C in the To-Go blender jug. ▶ Do not process food that is hotter than 70 °C in the blender jug. Note Limitations for processing:

¡ Do not use it to chop ingredients like almonds, onions, parsley and meat.

¡ The blender cannot be used to make mayonnaise. ¡ Use enough liquid when mixing solid food. ¡ Mix powered food with sufficient liquid before blending, or dissolve it entirely in liquid. Examples of powdered food include icing sugar, cocoa powder, roasted soybeans, flour, protein powder.

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. Troubleshooting

WARNING Risk of electric shock!

Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.

Fault The appliance is not working.

Cause troubleshooting

The mains plug of the power ▶ Connect the appliance to the power cord is not plugged in. supply. The circuit breaker is faulty.

▶ Check the circuit breaker in the

There has been a power cut. ▶ Check whether the lighting in your kitchen or other appliances are working. The status display (LED) flashes.

The lid or blender jug are not ▶ Set the rotary switch to ⁠. locked.

1. Place the blender jug onto the base unit and rotate in a clockwise direction until it locks into place. 2. Turn the lid in the direction until it clicks into place. a The colour of the lock indicator for the lid changes from red to green. 3. If required, select this option: ‒ Place the To-Go blender jug with the To-Go blade insert onto the base unit and rotate in a clockwise direction until it locks into place. Programme was cancelled using the rotary switch.

▶ Set the rotary switch to

Appliance has a humming sound.

Cause troubleshooting

The blade is blocked or stiff. ▶ Set the rotary switch to ⁠.

Appliance switches off during use.

Processing quantity is too great or processing time was too long.

▶ Remove the blockage.

▶ Set the rotary switch to ⁠. ▶ Reduce the processing quantity. ▶ Allow the appliance to cool down to

The programme does not start.

The rotary switch is not set to .

The programme has been cancelled using the programme button.

▶ Set the rotary switch to

1. Wait for three seconds.

2. Set the rotary switch to ⁠. 3. Press the programme button for the

The To-Go blade insert cannot be connected to the base unit.

Outlet protection is active.

▶ Screw the To-Go blade insert and

the To-Go blender jug in by turning them in a clockwise direction. a The To-Go blender jug and To-Go blade insert are fully and tightly screwed in.

Transportation, storage and disposal

Transportation, storage and disposal

Transportation, storage and disposal

Transportation, storage and disposal

Disposing of old appliance

Valuable raw materials can be reused by recycling. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. Customer Service

If you have any queries, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. You can solve many problems yourself by consulting the information on troubleshooting in these instructions or on our website. If this is not the case, contact our after-sales service. We always find an appropriate solution. With any warranty claims, we will make sure that your appliance is repaired by trained after-sales technicians using genuine spare parts, including after the manufacturer's warranty has expired. Customer Service

Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from

Customer Service for a period of at least 7 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer's warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the Customer Service directory at the end of the manual or on our website.

Product number (E-Nr.) and production number (FD)

You can find the product number (ENr.) and the production number (FD) on the appliance's rating plate. Make a note of your appliance's details and the Customer Service telephone number to find them again quickly.

You can make warranty claims for your appliance under the following conditions. The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt 43

must be produced when making any claim under the terms of this guarantee.

4. Placer le support de lames EasyK-

De Bediening in essentie

nl De Bediening in essentie

de stopper in de vulopening.

1. Forbered matvarene.

Central Service Contacts Service world-wide

GR Greece, Ελλάς BSH Ikiakes Siskeves A.B.E. Central Branch Service 17 km E.O. Athinon-Lamias & Potamou 20 14564 Kifisia Tηλέφωνο: 210 4277 500, -701 mailto:nkf-CustomerService@bshg.com www.bosch-home.gr IE Republic of Ireland BSH Home Appliances Ltd. M50 Business Park, Ballymount Road Upper, Walkinstown Dublin 12 To arrange an engineer visit, to order spare parts and accessories or for product advice please call Tel.: 01450 2655* www.bosch-home.ie *Calls are charged at the basic rate, please check with your telephone service provider for exact charges IT Italia, Italy BSH Elettrodomestici S.p.A. Via. M. Nizzoli 1 20147 Milano (MI) Tel. 02 412 678 100 mailto:info.it@bosch-home.com www.bosch-home.com/it LB Lebanon, لبنان Teheni, Hana & Co. Boulevard Dora 4043 Beyrouth, P.O. Box 90449 Jdeideh 1202 2040 Tel.: 01 255 211 mailto:Info@Teheni-Hana.com LU Luxembourg BSH électroménagers S.A. 13-15, ZI Breedeweues 1259 Senningerberg Tel.: 26349 811 Reparaturen: lux-repair@bshg.com Ersatzteile: lux-spare@bshg.com www.bosch-home.com/lu MT Malta Oxford House Ltd. Notabile Road Mriehel BKR 14 Tel.: 021 442 334 www.oxfordhouse.com.mt NL Nederland, Netherlands BSH Huishoudapparaten B.V. Taurusavenue 36 2132 LS Hoofddorp Storingsmelding/Onderdelenverkoop: Tel.: 088 424 4010 mailto:bosch-contactcenter@bshg.com mailto:bosch-onderdelen@bshg.com www.bosch-home.nl

BSH Home Appliances Ltd. Level 3, Air NZ Building, Smales Farm Business Park, 74 Taharoto Road, Takapuna Auckland 0622 Tel.: 0800 245 700* mailto:aftersales.nz@bshg.com www.bosch-home.co.nz *Mon-Fri 8.30am to 5pm (exclude public holidays)

BSH Home Appliances Pte. Ltd. 38C Jalan Pemimpin, #01-01 Singapore 577180 Tel.: 6751 5000* mailto:bshsgp.service@bshg.com www.bosch-home.com.sg *Mon-Fri 9am to 6pm, Sat: 9am to 1pm (exclude public holidays)

Thank you for buying a

Bosch Home Appliance! Register your new device on MyBosch now and profit directly from: • • • • •

Expert tips & tricks for your appliance

Warranty extension options Discounts for accessories & spare-parts Digital manual and all appliance data at hand Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones: www.bosch-home.com/welcome

You'll find it here. Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.bosch-home.com