Q: How to use the ARCHOS Hello 5 speaker?

The ARCHOS Hello 5 is a connected speaker with a screen. Here’s how to use it: Initial Setup Connect the 5V DC adapter and let it charge for at least 30 minutes before first use Press the ON/OFF button to turn on the device The home screen will display with customizable widgets Main Controls Volume +/- Buttons : Adjust the volume of music and notifications Microphone Mute Button : Press to turn the microphone on/off (an indicator confirms the status) Camera Cover : Use it to protect your privacy by blocking the built-in camera Connectivity Connect via WiFi through the device settings Use the Micro USB port for a wired connection if necessary Insert a Micro SD card into the dedicated slot to expand storage Voice Commands and Features Speak directly to the built-in voice assistant using the device's microphones Use the screen to start music playback or manually control the device Enjoy the built-in Qi wireless charging at the center (wooden surface) to recharge your other devices Restarting and Resetting For a forced restart, hold the ON/OFF button for 10 seconds To reset to factory settings, go to Settings or hold ON/OFF for 10 seconds Maintenance Tip: Clean the device with a soft, dry cloth. Avoid water and moisture.

Q: How do I turn on my ARCHOS 70B EREADER if the e-reader does not turn on?

Start by checking the battery charge : Plug the supplied power cable into a wall outlet Let it charge for at least 30 minutes before attempting to turn it on again When plugged in, your ARCHOS should automatically turn on and start charging If the device remains off after 30 minutes of charging: Press the power button , located on the side of the device (item 10 according to the manual diagram) Wait a few seconds for the screen to activate and the setup assistant to launch If the device still does not respond: Perform a forced restart : hold the power button down for about 10 seconds until it fully restarts If nothing happens, use the reset button located at the back of the device: press it with a pointed object (paperclip, pen) for a complete hardware reset Your ARCHOS 70B is equipped with a rechargeable lithium-ion battery that offers up to several weeks of autonomy. A lack of charge is the most common cause of failure to turn on.

Q: How to charge the ARCHOS GMINI 402 media player?

To charge your ARCHOS GMINI 402 media player, use only the ARCHOS power adapter provided with the device. Any other adapter could damage your device. Charging procedure: Plug the ARCHOS power adapter into a wall outlet Connect the cable to the power connector of the GMINI 402 Check that the CHARGE indicator (green) lights up, confirming that charging has started Full charge indicator: Once the batteries are fully charged, the green CHARGE indicator will start flashing . This is the signal that you can safely unplug the adapter. You can use your GMINI 402 while it is charging, but the charging process will take longer. For the first use, make sure to fully charge the batteries before starting. Battery life after full charge: You will enjoy up to 10 hours of MP3 audio playback or up to 3 hours of AVI video playback on the built-in screen. The device has a built-in lithium-ion battery designed for the product's lifespan. Do not attempt to replace it yourself.

Question 1

How to transfer videos to the ARCHOS Arnova 7 G2 tablet

Accepted Answer

You can transfer videos to your ARCHOS Arnova 7 G2 using several simple and effective methods.

Via direct USB connection

Connect the tablet to your computer using the supplied USB cable, with the device turned on. After a few seconds, the Arnova 7 G2 will appear as a storage device icon on your computer. You can then transfer your video files in two ways: either by opening Windows Explorer (or Finder on Mac) and copying/pasting your videos directly into the tablet's storage folders, or by using Windows Media Player. In Windows Media Player, click on the Sync tab to sync your chosen videos, music, and photos to the Arnova 7 G2. Once the transfers are complete, close Windows Explorer and all other programs, then click on the Safely Remove Hardware icon in the taskbar next to the clock before unplugging the USB cable.

Internal storage and microSD cards

Your Arnova 7 G2 has 4 GB of internal storage for your video files. You can also expand this capacity by inserting a microSD card into the designated slot (access at the top of the tablet). Once the card is inserted, you can transfer your videos to it in the same way as to the internal storage via USB connection. The tablet will automatically recognize the card upon reboot.

Via cloud services (Wi-Fi)

Your Arnova 7 G2 has a Wi-Fi connection 802.11 b/g/n. You can sync your videos via cloud services by downloading the corresponding apps from AppsLib (the official download app for Arnova). Log in to your cloud account via the tablet, and your videos will be directly accessible. This method does not require a USB cable.

All common video formats will be played by the built-in video player once the files are transferred. Make sure your computer is turned on during USB transfers to ensure complete synchronization.

Question 2

How to use the ARCHOS Hello 5 speaker?

Accepted Answer

The ARCHOS Hello 5 is a connected speaker with a screen. Here’s how to use it:

Initial Setup

Connect the 5V DC adapter and let it charge for at least 30 minutes before first use
Press the ON/OFF button to turn on the device
The home screen will display with customizable widgets

Main Controls

Volume +/- Buttons: Adjust the volume of music and notifications
Microphone Mute Button: Press to turn the microphone on/off (an indicator confirms the status)
Camera Cover: Use it to protect your privacy by blocking the built-in camera

Connectivity

Connect via WiFi through the device settings
Use the Micro USB port for a wired connection if necessary
Insert a Micro SD card into the dedicated slot to expand storage

Voice Commands and Features

Speak directly to the built-in voice assistant using the device's microphones
Use the screen to start music playback or manually control the device
Enjoy the built-in Qi wireless charging at the center (wooden surface) to recharge your other devices

Restarting and Resetting

For a forced restart, hold the ON/OFF button for 10 seconds
To reset to factory settings, go to Settings or hold ON/OFF for 10 seconds

Maintenance Tip: Clean the device with a soft, dry cloth. Avoid water and moisture.

Question 3

How do I turn on my ARCHOS 70B EREADER if the e-reader does not turn on?

Accepted Answer

Start by checking the battery charge:

Plug the supplied power cable into a wall outlet
Let it charge for at least 30 minutes before attempting to turn it on again
When plugged in, your ARCHOS should automatically turn on and start charging

If the device remains off after 30 minutes of charging:

Press the power button, located on the side of the device (item 10 according to the manual diagram)
Wait a few seconds for the screen to activate and the setup assistant to launch

If the device still does not respond:

Perform a forced restart: hold the power button down for about 10 seconds until it fully restarts
If nothing happens, use the reset button located at the back of the device: press it with a pointed object (paperclip, pen) for a complete hardware reset

Your ARCHOS 70B is equipped with a rechargeable lithium-ion battery that offers up to several weeks of autonomy. A lack of charge is the most common cause of failure to turn on.

Question 4

How do I turn on my ARCHOS Core 101 3G V2 graphics tablet when it won't power on?

Accepted Answer

If your ARCHOS Core 101 3G V2 graphics tablet won't power on, here are several steps to try to turn it back on:

1. Check the battery charge

Plug the tablet into its original charger and let it charge for at least 15 to 30 minutes. A completely drained battery may prevent immediate power on.

2. Force a restart

Press and hold the power button for about 10 to 15 seconds. This may force the tablet to restart even if it appears to be frozen.

3. Check the charger and cable

Make sure the charger and cable you are using are functioning properly. If possible, try using another compatible charger to rule out a power issue.

4. Remove SIM and memory cards

Sometimes, a faulty SIM card or memory card can prevent the device from powering on. Remove them and then try to turn the tablet back on.

5. Last resort

If the tablet still won't turn on after these steps, it may be a hardware issue requiring technical assistance.

Question 5

How to activate the flip function to answer calls on the ARCHOS FLIP PHONE?

Accepted Answer

The ARCHOS FLIP PHONE, running on Android Go Edition, has an automatic answering function by opening the flap that allows you to answer simply by opening the phone. Here’s how to activate it:

Access the settings by tapping the gear icon on the home screen or by pulling down the status bar and selecting the Settings icon.
Open the 'Calls' section or search for 'Call settings' in the available options.
Locate the answer by opening option, usually titled 'Answer by opening the phone', 'Flap answer' or 'Automatic flip answer'.
Enable the option by toggling the switch or checking the corresponding box. The option should then display as 'Enabled' or 'Activated'.

Once this function is activated, you will be able to answer all incoming calls simply by opening the flap of your ARCHOS FLIP PHONE, without pressing any additional buttons. This function is particularly convenient for a quick response when you receive a call.

If you cannot find this option in the call settings, check that your phone has the latest software update. To do this, go to Settings > System > System update. If the option remains unavailable after an update, some network operators or model variants may not support this feature. In this case, contact ARCHOS support or your operator for assistance.

Question 6

How to forget a Wi-Fi network on the ARCHOS Arnova 7e G2 Dual Touch tablet?

Accepted Answer

To forget a Wi-Fi network on your ARCHOS Arnova 7e G2 Dual Touch tablet, follow these steps:

Open Settings: From the home screen, tap the Settings icon (represented by a gear).
Go to the Wi-Fi section: In the settings menu, select Wi-Fi or Wireless and networks depending on the installed Android version.
View saved networks: You will see the list of available Wi-Fi networks and those you have previously connected to.
Forget the network: Press and hold the name of the Wi-Fi network you want to forget. A context menu will appear.
Select "Forget": In this menu, choose the Forget or Remove option. This will erase the saved connection information for this network.

After forgetting the network, your tablet will no longer connect to it automatically. To reconnect, you will need to select the network from the list and re-enter the password.

Question 7

How to troubleshoot Wi-Fi connection issues on the ARCHOS Arnova 7e G2 Dual Touch tablet?

Accepted Answer

If your ARCHOS Arnova 7e G2 Dual Touch tablet is no longer connecting to the Wi-Fi network, here are several steps to identify and resolve the issue:

1. Check the Wi-Fi network

Make sure your router is functioning properly and that Wi-Fi is enabled.
Test the connection with another device (smartphone, computer) to confirm that the network is accessible.

2. Restart the tablet

Completely turn off your tablet, wait a few seconds, then turn it back on. This may resolve temporary bugs related to Wi-Fi.

3. Forget and reconnect to the Wi-Fi network

In the tablet's Settings, go to the Wi-Fi section.
Look for your network in the list, then select the Forget this network option or similar.
Reconnect by selecting the network again and entering the correct password.

4. Check the Wi-Fi password

Make sure that the password you enter is correct, paying attention to uppercase, lowercase, and special characters.

5. Move closer to the router

The tablet should be within range of the Wi-Fi signal. Avoid significant obstacles or interference that could weaken the connection.

6. Update the system

If possible, check in the settings if a system update is available. Updates can fix Wi-Fi related issues.

By following these tips, you should be able to restore the Wi-Fi connection on your ARCHOS Arnova 7e G2 Dual Touch tablet. If the problem persists, it may be helpful to check the advanced settings of the router or contact a specialized technical service.

Question 8

How to charge the ARCHOS GMINI 402 media player?

Accepted Answer

To charge your ARCHOS GMINI 402 media player, use only the ARCHOS power adapter provided with the device. Any other adapter could damage your device.

Charging procedure:

Plug the ARCHOS power adapter into a wall outlet
Connect the cable to the power connector of the GMINI 402
Check that the CHARGE indicator (green) lights up, confirming that charging has started

Full charge indicator: Once the batteries are fully charged, the green CHARGE indicator will start flashing. This is the signal that you can safely unplug the adapter.

You can use your GMINI 402 while it is charging, but the charging process will take longer. For the first use, make sure to fully charge the batteries before starting.

Battery life after full charge: You will enjoy up to 10 hours of MP3 audio playback or up to 3 hours of AVI video playback on the built-in screen. The device has a built-in lithium-ion battery designed for the product's lifespan. Do not attempt to replace it yourself.

Question 9

How to solve the problem of the virtual keyboard not appearing when entering the Wi-Fi password on the ARCHOS 101C PLATINUM tablet?

Accepted Answer

If the virtual keyboard does not appear when you try to enter the password for your Wi-Fi box on your ARCHOS 101C PLATINUM tablet, here are several solutions to try:

1. Check keyboard settings

Go to Settings > Language and input.
Make sure the virtual keyboard is enabled and selected as the default input method.
If you are using a third-party keyboard, try switching back to the default Android keyboard.

2. Restart the tablet

A simple restart can resolve temporary bugs related to keyboard display.

3. Close and reopen the application or input screen

Close the screen where you enter the password, then try reopening it to see if the keyboard appears.

4. Update the system

Go to Settings > About tablet > System updates.
Install any available updates that may fix bugs.

5. Check the Wi-Fi connection

Make sure the tablet is connected to a Wi-Fi network or that you are on the password input screen for a new connection.

If the problem persists after these steps, it may be helpful to reset the keyboard or tablet settings, but this involves backing up your data first.

User manual ARCHOS : user manuals and guides in PDF

Models ARCHOS most viewed

Browse manuals ARCHOS by appliance type

Recent questions about devices ARCHOS