Q: Do I need to change the oil in the engine of the RIBIMEX JET121 pump?

The RIBIMEX JET121 pump does not require a complete oil change like a conventional thermal engine. However, the manual mentions regularly checking the oil levels as part of maintenance. Maintenance is limited to: Checking and adjusting the oil levels if necessary Inspecting the integrity of seals and the tightness of connections before each restart Cleaning the inlet filter Draining the pump before winter or storing it in a frost-free place The manual does not specify a specific oil change frequency. For optimal maintenance of your electric motor, refer to the provided manual or contact the manufacturer if you have any doubts about the quantity or type of oil.

Question 1

Do I need to change the oil in the engine of the RIBIMEX JET121 pump?

Accepted Answer

The RIBIMEX JET121 pump does not require a complete oil change like a conventional thermal engine. However, the manual mentions regularly checking the oil levels as part of maintenance.

Maintenance is limited to:

Checking and adjusting the oil levels if necessary
Inspecting the integrity of seals and the tightness of connections before each restart
Cleaning the inlet filter
Draining the pump before winter or storing it in a frost-free place

The manual does not specify a specific oil change frequency. For optimal maintenance of your electric motor, refer to the provided manual or contact the manufacturer if you have any doubts about the quantity or type of oil.

Question 2

How to maintain the fabric filter of the RIBIMEX CeneAsp vacuum cleaner?

Accepted Answer

The RIBIMEX CeneAsp 30 liters vacuum cleaner is equipped with two complementary filters: a fabric filter and a sponge filter (polyurethane) that protect the 1200W motor. Regular maintenance of the fabric filter is essential to maintain suction power and prolong the lifespan of your device.

Cleaning indicator: You will know it is time to clean the filter when the suction power significantly decreases after use. Unplug the device from the power supply before any intervention.

Cleaning procedure:

Unplug the vacuum cleaner from the power outlet
Release the two locking hooks located on each side of the top cover
Carefully remove the top cover
Gently pull out the sponge filter and the fabric filter
First, empty the dust from the canister by turning it upside down over a trash can
Shake the fabric filter vigorously outside to remove trapped dust
If fine particles stick to the filter, gently clean it with a soft brush using gentle motions

Important points: Never clean the fabric filter with water, chemicals, or solvents, as this could damage it and compromise its effectiveness. After cleaning, check that both filters have no holes, tears, or excessive wear. A damaged filter must be replaced immediately to ensure optimal suction and motor protection.

Reassembly: Once the filters are dry and clean, first reinstall the fabric filter, then the sponge filter in their place. Replace the top cover and tighten the two locking hooks until they click to ensure a good seal. This step is crucial for your vacuum cleaner to function properly.

Recommended frequency: Empty the canister after each prolonged use to avoid premature loss of power. Completely clean the fabric and sponge filters at least once a month depending on your usage frequency.

User manual RIBIMEX : user manuals and guides in PDF

Models RIBIMEX most viewed

Browse manuals RIBIMEX by appliance type

Recent questions about devices RIBIMEX