User manual HAIER Range hood : 42 free PDF user manuals

Q: How to cancel or stop the delay off and intensive mode when the button keeps flashing?

If the T5 button (intensive/booster mode) is flashing and repeated pressing does not stop it, your hood is in automatic delay off mode - a function available only on models with remote control. Here’s how to proceed: Press T1 (OFF) - This immediately stops the motor and cancels all active delays, including the delay off and the 5-minute intensive mode. If T1 does not respond , try pressing one of the speed buttons (T2, T3, or T4) - this should restart normal operation and stop the timer from flashing. Good to know: The intensive mode lasts exactly 5 minutes, after which the hood automatically returns to medium speed or turns off. The flashing of the T5 button simply indicates that this delay is active - this is normal. Repeated presses on T5 only restart the 5-minute cycle instead of canceling it. To stop immediately, always use the OFF (T1) button.

Q: Why is the timer button blinking?

The timer button blinks during the intensive function (T5). This HAIER hood has an automatic booster mode that blinks to indicate an active timer. Explanation of the blinking: When you press the T5 button (intensive speed), the hood enters booster mode for exactly 5 minutes . During these 5 minutes, the T5 button blinks to indicate that the timer is active. Once the 5 minutes are up, the hood automatically returns to medium speed (power). The blinking is therefore a normal operating indicator and means that the booster mode is active and counting down.

Models HAIER Range hood most viewed

User manual HAIER Range hood : user manuals and guides in PDF

Models HAIER Range hood most viewed

Other categories HAIER

Recent questions about Range hood HAIER