Q: Does the ice reservoir of the HAIER HSW79F18DIPT need to be filled manually?

No, the reservoir does not need to be filled manually. The HAIER HSW79F18DIPT features a fully automatic ice-making system that produces approximately 0.8 kg of ice every 24 hours . Activating the system The system is disabled by default when the appliance is turned on. To activate it: Press and hold the E button for 3 seconds The e2 indicator will light up to confirm activation A sound signal will be heard Operating conditions For the system to function correctly: The water supply must be open and connected The ice reservoir must be properly installed The refrigerator door must remain closed during production Wait 24 hours after the first startup before obtaining normal production Choosing the type of ice You can choose between: H2 button: cube ice H3 button: crushed ice

Q: How long can food be stored in the HAIER HFR79F19EFGK freezer?

The HAIER HFR79F19EFGK freezer reaches a temperature of -24°C (4-star class), which ensures excellent long-term preservation of food. For optimal storage, the recommended temperature is -18°C . Here are the general recommended storage times for the main types of food in this freezer: Raw meat : 6-12 months Raw fish : 3-8 months Poultry : 6-12 months Prepared dishes : 2-3 months Vegetables : 8-12 months Fruits : 8-12 months Bread : 3 months Dairy products : 1-3 months Storage tips To best preserve the quality of your food: Let food cool before placing it in the freezer Avoid overloading the freezer - good air circulation improves preservation Label your food with the freezing date Keep the door tightly closed to maintain temperature Important: In case of a power outage, your food will remain cold for about 5 hours if you keep the door closed.

Q: Why doesn't the light turn on when I open the refrigerator door?

According to the manual for the HAIER HFR79F19EFGK, the LED light inside should automatically turn on when you open the door . This appliance has several LED-lit areas: the back lamp of the refrigerator, the freezer, the Fresh Box, and the handle lamp. If the light does not turn on when opened, here are the possible causes: Defective or burnt-out LED - One of the 12V lamps may be at the end of its life Door detection issue - The sensor that detects the door opening may be misaligned or faulty Important: According to the manual, you should not replace the LED lamp yourself . It should only be replaced by the manufacturer Haier or by an authorized service agent. LEDs are 12V components that require professional intervention. We recommend contacting Haier customer support for a professional diagnosis and repair.

Q: What is the purpose of the C3 indicator on the HAIER HSW79F18DIPT?

C3 is the water filter replacement reminder indicator for the HAIER HSW79F18DIPT refrigerator. How it works: After 6 months of operation of the refrigerator, the C3 indicator will automatically light up to remind you to replace the water filter with a new one. It is a preventive maintenance system integrated into your appliance. How to reset C3: Once you have installed a new filter, press and hold the C button for 3 seconds . The C3 indicator will turn off and the 6-month counter will be reset.

Question 1

Does the ice reservoir of the HAIER HSW79F18DIPT need to contain water?

Accepted Answer

No, the ice container should not contain any visible stagnant water during normal operation. Water only passes through the system to make ice cubes.

Here’s how the system works:

Water comes in through the incoming water connection (must be open)
It is automatically frozen to produce about 0.8 kg of ice cubes every 24 hours
The formed ice cubes accumulate in the tray
Unused water drains away

Important: If you see a lot of water in the tray or an abnormal accumulation, check that:

The water supply is open (check the shut-off valve)
The ice tray is properly installed
The HRXWF filter is not clogged (to be replaced every 6 months when the C3 indicator lights up)
The function is activated (hold the E button for 3 seconds until the e2 indicator lights up)

After the first commissioning, wait 24 hours for production to reach its normal rate.

Question 2

Does the ice reservoir of the HAIER HSW79F18DIPT need to be filled manually?

Accepted Answer

No, the reservoir does not need to be filled manually. The HAIER HSW79F18DIPT features a fully automatic ice-making system that produces approximately 0.8 kg of ice every 24 hours.

Activating the system

The system is disabled by default when the appliance is turned on. To activate it:

Press and hold the E button for 3 seconds
The e2 indicator will light up to confirm activation
A sound signal will be heard

Operating conditions

For the system to function correctly:

The water supply must be open and connected
The ice reservoir must be properly installed
The refrigerator door must remain closed during production
Wait 24 hours after the first startup before obtaining normal production

Choosing the type of ice

You can choose between:

H2 button: cube ice
H3 button: crushed ice

Question 3

How long can food be stored in the HAIER HFR79F19EFGK freezer?

Accepted Answer

The HAIER HFR79F19EFGK freezer reaches a temperature of -24°C (4-star class), which ensures excellent long-term preservation of food. For optimal storage, the recommended temperature is -18°C.

Here are the general recommended storage times for the main types of food in this freezer:

Raw meat: 6-12 months
Raw fish: 3-8 months
Poultry: 6-12 months
Prepared dishes: 2-3 months
Vegetables: 8-12 months
Fruits: 8-12 months
Bread: 3 months
Dairy products: 1-3 months

Storage tips

To best preserve the quality of your food:

Let food cool before placing it in the freezer
Avoid overloading the freezer - good air circulation improves preservation
Label your food with the freezing date
Keep the door tightly closed to maintain temperature

Important: In case of a power outage, your food will remain cold for about 5 hours if you keep the door closed.

Question 4

Why doesn't the light turn on when I open the refrigerator door?

Accepted Answer

According to the manual for the HAIER HFR79F19EFGK, the LED light inside should automatically turn on when you open the door. This appliance has several LED-lit areas: the back lamp of the refrigerator, the freezer, the Fresh Box, and the handle lamp.

If the light does not turn on when opened, here are the possible causes:

Defective or burnt-out LED - One of the 12V lamps may be at the end of its life
Door detection issue - The sensor that detects the door opening may be misaligned or faulty

Important: According to the manual, you should not replace the LED lamp yourself. It should only be replaced by the manufacturer Haier or by an authorized service agent. LEDs are 12V components that require professional intervention.

We recommend contacting Haier customer support for a professional diagnosis and repair.

Question 5

Where is the K2 button on the HAIER HDPW5620ANPD and what does it do?

Accepted Answer

The K2 button is the compartment selection key on the control panel of the HAIER HDPW5620ANPD. It allows you to switch between the three temperature zones of your appliance.

How to use K2

Press K2 successively to select:

Refrigerator (icon A) - Range 2 to 8°C, optimal 5°C
My Zone (icon B) - Range 0 to 5°C, optimal 2°C
Freezer (icon C) - Range -24 to -16°C, optimal -18°C

Once the compartment is chosen, use the other buttons on the panel (K1 to decrease, K8 to increase) to adjust the desired temperature for that compartment.

Question 6

How to increase the ice production of the HAIER HSW79F18DIPT?

Accepted Answer

If your HAIER HSW79F18DIPT produces few ice cubes, here are the checks to perform:

Activate the ice function

By default, the ice maker is disabled upon power on. Hold the E button for 3 seconds to activate it. The e2 indicator should light up. You can also select your type of ice: H2 for ice cubes or H3 for crushed ice.

Wait at startup

After the first startup, wait 24 hours before having normal production. This is the system stabilization time.

Check the water supply

Make sure the water supply tap is open
Check that the ice tray is properly installed
Keep the refrigerator door closed during production (the motor stops if you open it)

Check the water filter

A gradual decrease in production may indicate a clogged filter. The filter model HRXWF should be replaced every 6 months. After replacement, let the water run for about 5 minutes to remove air from the system.

Clean the ice tray

Regularly clean the tray with hot water, especially if the ice cubes are new or expired. Drain and clean the tray if the appliance has not been used for a long time.

Normal production: Your appliance produces about 0.8 kg of ice cubes every 24 hours.

Question 7

What is the purpose of the C3 indicator on the HAIER HSW79F18DIPT?

Accepted Answer

C3 is the water filter replacement reminder indicator for the HAIER HSW79F18DIPT refrigerator.

How it works:

After 6 months of operation of the refrigerator, the C3 indicator will automatically light up to remind you to replace the water filter with a new one.
It is a preventive maintenance system integrated into your appliance.

How to reset C3:

Once you have installed a new filter, press and hold the C button for 3 seconds.
The C3 indicator will turn off and the 6-month counter will be reset.

Question 8

How to activate the ice maker indicator on the HAIER HSW79F18DIPT?

Accepted Answer

To display the ice maker logo/indicator on your HAIER HSW79F18DIPT:

By default, the ice maker is disabled when powered on. To activate it and see the e2 indicator light up:

Press and hold the E button for 3 seconds
The "e2" indicator (ice maker mode active) will appear on the screen
A beep will confirm the activation

Once activated, you can choose the type of ice:

H2 button: cube ice
H3 button: crushed ice

The normal production is about 0.8 kg per 24 hours. After initial installation, allow 24 hours for the system to stabilize before reaching full production.

Question 9

What is the E button for on the HAIER HSW79F18DIPT?

Accepted Answer

The E button on your HAIER HSW79F18DIPT has two distinct functions depending on the duration of the press:

Super-Freezing (short press)

A simple press on the E button activates the Super-Freeze mode to quickly freeze large quantities of food. The e1 indicator lights up when this function is active. This mode consumes more energy and is intended for cycles of 12 to 24 hours. You can press E again to manually deactivate the super-freezing before the end of the cycle.

Ice Maker (long press - 3 seconds)

Hold the E button for 3 seconds to activate or deactivate the ice maker. The e2 indicator lights up when the system is active. Note: the ice maker is disabled by default when your appliance is delivered. Your appliance can produce up to 0.8 kg of ice every 24 hours.

The duration of your press on E thus determines its function: short for super-freezing, long (3 sec) for ice.

Question 10

What is the position of the ice tray lock on the HAIER HFR79F19EFGK?

Accepted Answer

On the HAIER HFR79F19EFGK refrigerator-freezer, the ice tray lock is located at the front of it. To access the tray and remove the ice cubes, turn the ice tray button all the way to the left to unlock it, then pull the handle.

Once unlocked, you can use the small scoop provided to easily extract the ice cubes from the built-in storage tray.

User manual HAIER Refrigerator-freezer : user manuals and guides in PDF

Models HAIER Refrigerator-freezer most viewed

Other categories HAIER

Recent questions about Refrigerator-freezer HAIER