Q: How to reset and set up this HAMA remote control for a Samsung TV?

Resetting the remote control: Remove the 2 LR03 (AAA) batteries Press any button for 30 seconds to clear the memory Insert new batteries (alkaline recommended) Setup for Samsung TV (direct method, Section 5.1): Turn on your Samsung TV Press the SETUP button until the LED indicator turns solid green Press the device selection button TV Locate the 4-digit code for your Samsung model in the code list in the manual Enter this code using the numeric buttons (0-9). The LED indicator confirms each entered digit The code is automatically saved after the 4th digit If the code is incorrect, the LED blinks 6 times. Start again with another code Test the POWER, VOL+, VOL-, MUTE buttons to confirm functionality Alternative: automatic code search (Section 5.3) If you cannot find your exact code: press SETUP (green LED), select TV, then hold PROG+ . The remote will automatically test the codes. When your TV turns off, press MUTE to validate the found code. Tip: Point the remote directly at the infrared sensor of your TV for a better signal. The manual contains a list of over 350 Samsung codes.

Question 1

How to reset and set up this HAMA remote control for a Samsung TV?

Accepted Answer

Resetting the remote control:

Remove the 2 LR03 (AAA) batteries
Press any button for 30 seconds to clear the memory
Insert new batteries (alkaline recommended)

Setup for Samsung TV (direct method, Section 5.1):

Turn on your Samsung TV
Press the SETUP button until the LED indicator turns solid green
Press the device selection button TV
Locate the 4-digit code for your Samsung model in the code list in the manual
Enter this code using the numeric buttons (0-9). The LED indicator confirms each entered digit
The code is automatically saved after the 4th digit
If the code is incorrect, the LED blinks 6 times. Start again with another code
Test the POWER, VOL+, VOL-, MUTE buttons to confirm functionality

Alternative: automatic code search (Section 5.3)

If you cannot find your exact code: press SETUP (green LED), select TV, then hold PROG+. The remote will automatically test the codes. When your TV turns off, press MUTE to validate the found code.

Tip: Point the remote directly at the infrared sensor of your TV for a better signal. The manual contains a list of over 350 Samsung codes.

Question 2

Where can I find the list of codes to program the HAMA 12306 4 IN 1 universal remote control?

Accepted Answer

The list of codes for the HAMA 12306 4 IN 1 universal remote control is provided directly in the package. It comes in the form of printed documentation included with the remote control and contains four-digit codes for most common audiovisual device manufacturers. This list is organized alphabetically and categorized by device type (TV, DVD, decoder, amplifier, stereo system, etc.).

To program your remote control using these codes, you must first consult the included list and locate the brand and model of your device. Once you find the code, turn on the device you wish to control, then press the SETUP button until the LED light stays on permanently. Then select the type of device using the selection buttons (TV, DVD, etc.), and enter the corresponding four-digit code using the numeric keys 0-9. The LED light blinks to confirm each digit entered and turns off after the fourth digit to indicate that the code is saved.

If you do not have the original code list or are looking for additional codes, visit the official site www.hama.com which offers support resources including updated code lists. You can also contact Hama Product Consulting directly at the support line: +49 9091 502-115 (available in German and English) to obtain the specific code for your device.

If the code found in the list does not work correctly, the remote control offers two convenient alternatives: manual search, which allows you to scroll through about 350 preloaded codes by device type by pressing the POWER or PROG+/PROG- buttons until your device responds, and automatic search, which automatically scans the codes (you can adjust the scanning speed between 1 or 3 seconds per code according to your preferences). It is important to note that some specialized models of devices may not have compatible codes available.

Question 3

How to disable subtitles on RTL, TV2, and ATV channels using the HAMA 4in1 00012306 remote control?

Accepted Answer

To disable subtitles on RTL, TV2, and ATV channels using the HAMA 4in1 00012306 remote control, follow these steps:

1. Check the function of the dedicated subtitle button

The HAMA 4in1 remote control usually has a "Subtitle" or "SUB" button that allows you to turn subtitles on or off. Press this button once when you are on the relevant channel to change the subtitle status.

2. Use your TV's menu

If the direct button does not work, it is possible that subtitle control is managed through the TV menu:

Press the Menu button on the remote control.
Go to the Options or Accessibility section.
Look for the Subtitles option.
Disable the subtitles or select Off.

3. Check the settings of the decoder or TV box

If you are using an external decoder, it may have its own subtitle settings. In this case:

Use the decoder's remote control to access the subtitle menu.
Disable the subtitles in the settings.

4. Specifics of RTL, TV2, ATV channels

Some channels may broadcast hardcoded subtitles (integrated into the image) or offer multiple options. If disabling via the remote control does not work, it is possible that the subtitles are embedded and cannot be removed via the remote control.

Tip: Try changing the input source or reception mode (satellite, cable, TNT) to see if it affects subtitle management.

User manual HAMA Remote control : user manuals and guides in PDF

Models HAMA Remote control most viewed

Other categories HAMA

Recent questions about Remote control HAMA