How to insert flat labels into the CITIZEN CL-E300 thermal printer?

Question

Accepted Answer

To use flat labels (not on a roll) with the CITIZEN CL-E300 thermal printer, follow these steps:

1. Remove the label roll

Open the printer cover and remove the holder containing the currently installed label roll.

2. Prepare the flat labels

Ensure that your flat labels are size-compatible with the printer. They should be well-aligned and flat to avoid jams.

3. Insert the flat labels

Place the labels in the designated compartment, ensuring they are properly positioned against the media guides.
Adjust the side guides to hold the labels firmly without bending them.

4. Configure the printer

Change the printer settings to indicate that you are using flat labels and not a roll. This can be done via the control panel or the associated software.

5. Close the cover and test

Close the printer cover and run a test print to check that the labels are correctly fed and printed.

By following these steps, you should be able to print on flat labels with your CITIZEN CL-E300 without any issues.

User manual CITIZEN Thermal printer : user manuals and guides in PDF

Models CITIZEN Thermal printer most viewed

Other categories CITIZEN

Recent questions about Thermal printer CITIZEN