How to reset the display of the BH FITNESS Cross1100 H8750 exercise bike?

Question

Accepted Answer

To reset the display of your BH FITNESS Cross1100 H8750 exercise bike, two methods are available:

Method 1: Complete system reset (recommended)

Completely turn off the exercise bike by pressing the START/STOP button.
Unplug the power cable from the electrical outlet.
Wait 30 seconds to allow the electronic system of the display to fully discharge.
Plug the exercise bike back in and turn it on by pressing START/STOP. The display should show all segments and return to the reset home screen.

Method 2: Reset via the RESET button on the display

Completely stop your workout session by pressing START/STOP.
Press and hold the RESET button (located on the display console) for 2 to 3 seconds.
The display will briefly show all segments, then return to the home screen with all settings cleared (time, distance, calories, heart rate).

If the display does not respond with these two methods, first check that the batteries (if present) are in good condition, as weak batteries can cause malfunctions. Also, ensure that the connection cable between the display and the main frame is properly plugged in and free of corrosion.

If the reset still does not work, contact the Technical Assistance Service (SAT) of BH Fitness - you will find the customer support contact details on the last page of your user manual.

User manual BH FITNESS Exercise bike : user manuals and guides in PDF

Models BH FITNESS Exercise bike most viewed

Other categories BH FITNESS

Recent questions about Exercise bike BH FITNESS