BH FITNESS H832TFT - Exercise bike

H832TFT - Exercise bike BH FITNESS - Free user manual and instructions

Find the device manual for free H832TFT BH FITNESS in PDF.

📄 34 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BH FITNESS H832TFT - page 9
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Exercise bike
Brand BH Fitness
Model H832TFT
Standard EN957 class H.B. (domestic use)
Maximum user weight 130 kg
Power supply 220 V AC via mains transformer
Monitor Electronic with training data display
Heart rate measurement Integrated hand grips
Seat Height adjustable via knob
Handlebar Fixed, with protective covers
Pedals Right (R) and left (L), differential threading
Bottle holder Included
Transport Front wheels for moving
Leveling Rear adjustable support caps
Assembly Requires two people, instructions provided
Maintenance Clean with damp cloth, avoid solvents
Use Indoor, flat and stable surface
Safety Read manual before use, consult a doctor if necessary

Frequently Asked Questions - H832TFT BH FITNESS

How to assemble the BH Fitness H832TFT exercise bike?
Assembly requires two people. Follow the steps: remove all parts, mount the front and rear stabilizer bars with the provided screws and washers, attach the seat post and seat, mount the center tube, connect the monitor cables, install the handlebar and monitor, then the pedals respecting the threading direction. Tighten all screws firmly.
What is the maximum supported weight for this bike?
The maximum user weight must not exceed 130 kg according to standard EN957 class H.B.
How to adjust the seat height?
Loosen the height regulator (83) by turning counterclockwise, pull it backward, adjust the seat to the desired height, then release the regulator so it locks into a hole. Tighten the regulator clockwise.
How to install the pedals correctly?
Identify the right pedal (R) and left pedal (L). The right pedal screws clockwise onto the right crank (R). The left pedal screws counterclockwise onto the left crank (L). Tighten firmly to prevent loosening.
How to level the bike?
Use the adjustable support caps (23) located at the rear of the bike. Turn them in one direction or the other to stabilize the device on a flat surface. Check stability before use.
How to use the electronic monitor?
The monitor turns on automatically when you start pedaling or after connection. It displays data such as time, distance, speed, and calories. You can change the display via the monitor buttons.
How to measure your heart rate?
Place your hands on the hand grips in contact with the sensors. The monitor will display your heart rate once the signal is stable. Ensure your hands are in good contact.
What are the important safety instructions?
Read the manual before use. Keep children away from the machine. Use it alone, on a flat surface. Stop if you feel unwell. Consult a doctor before any training if you are over 35 or have health issues. Wear appropriate clothing and sports shoes.
How to maintain the exercise bike?
Clean the frame and plastic parts regularly with a damp cloth and mild detergent. Avoid solvents. Periodically check the tightness of screws and condition of pedals. Store in a dry place.
Where to find spare parts for this model?
Contact the Technical Support Service (SAT) at the number on the last page of the manual. Indicate the part code and desired quantity when ordering.

User questions about H832TFT BH FITNESS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Exercise bike in PDF format for free! Find your manual H832TFT - BH FITNESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H832TFT by BH FITNESS.

USER MANUAL H832TFT BH FITNESS

This bicycle has been designed and constructed to provide maximum safety. Nevertheless, certain precautions should be taken when using exercise equipment. Read the whole manual before assembling and using the bicycle. The following safety precautions should also be observed:

1 Keep children away from this equipment at all times. DO NOT leave them unsupervised in the room where this bicycle is kept.
2 It can only be used by one person at a time.
3 If you experience dizziness, nausea, chest pains or any other symptom while using this appliance STOP the exercise. SEEK MEDICAL ATTENTION IMMEDIATELY
4 Use the appliance on a level, solid surface. DO NOT use the bicycle outdoors or close to water.
5 Keep your hands well away from any of the moving parts.
6 Wear clothing suitable for doing exercise. Do not use baggy clothing that might get caught up in the bicycle. Always wear running shoes or trainers when using the machine.
7 This appliance must only be used for the purposes described in this manual. DO NOT use accessories that are not recommended by the manufacturer.
8 Do not place sharp objects near the machine.
9 Disabled people should not use the machine without the assistance of a qualified person or a doctor.

10 Do warm up stretching exercises before using the equipment.
11 Do not use the bicycle if it is not working correctly.

Caution: Consult your doctor before beginning to use the bicycle. This advice is especially important for those over 35 or suffering from health problems. Read all of the instructions before using any exercise equipment. Keep these instructions safe for future use.

GENERAL INSTRUCTIONS.-

Carefully read through the instructions contained in this manual. It provides you with important information about assembly, safety and use of the machine.

1 This appliance has been tested and it complies with standard EN957 under class H.B., suitable for domestic use only. The weight of the user must not exceed 130kg .

2 Parents and/or those responsible for children should always take their curious nature into account and how this can often lead to hazardous situations and behaviour resulting in accidents.

Under no circumstances should this appliance be used as a toy.

3 The owner is responsible for ensuring that anyone who uses the machine is duly informed about the necessary precautions.

ASSEMBLY INSTRUCTIONS.-

1.- Take the unit out of its box and make sure that all of the pieces are there, Fig.1:

(1) Main body; (6) Main post; (7) handlebar; (8) Electronic monitor; (4) Saddle post; (2) Front stabiliser bar with wheels; (3) Rear stabiliser bar with adjustable feet; (5) Saddle; Pedals (19) Right and (18) Left; (20) Bottle holder; Handlebar cover (14) left, (15) right and (13) fontera; (21) Handlebar plug; Seat cover (16) left and right (17); (23) Saddle knob; (29) Screws M-4x6; (32) Screws M-4x16; (87) Screws M-4x12; (27) Spring washer M10; (28) Flat washer M10; (26) Screws M-10x70x20; (31) Screws M-12x60.

ATTENTION: The assistance of a second person is required for this stage of the assembly.

Take the stabilizer bar with wheels (2) and place it on the front of the unit, as shown in Fig.2, insert the screws (26), place the washers (27) and (28).

Then take the rear stabiliser bar with the adjustable blocks (3) and carry out the same assembly operation as with the front stabiliser bar, tighten up all securely.

3.- ATTACHING THE SADDLE.-

Insert the Saddle post (4) through the hole in the main body (1), Fig.4. Attach the saddle (5) to the slide (60) with the nuts (59). Fig 5b

Place the saddle (5) on the Saddle post (4), position the saddle knob (23) with the bushing (25), secure the saddle in its comfortable position with the knob (23) and tighten by turning clockwise

direction. Attach the left (17) and right (16) saddle covers with screws (29). Fig.5.

Bring the main post (6) up to the boss on the main body (1), Fig.6, and connect terminals (9) and (10).

Position the handlebar (7) to the Main post (6), Fig.7, install the handlebar cover (13) with the knob (21) and tighten them. Check the alignment of the handlebar before tightening all screws. Then position the bottle holder (20) with screw (32).

6.- FITTING THE ELECTRONIC MONITOR.-

Remove the screws (24) from the back of the monitor, then place the monitor on top of the main post (6) making sure not to pinch any of the cables. Refit the screws and tighten, connect the handgrip terminal (11) and the feedback terminal (9) at the back of the monitor, as shown in Fig.8.

Then attach the left handle cover (14) and right handle cover (15) with screws (32). Screw the front handlebar cover (13) with screws (87).

7.- ATTACHING THE PEDALS.-

The assembly instructions for the pedals must be followed to the letter, fitting these incorrectly could damage the screw thread on the pedal or the crank.

Right and left refer to the position that the user adopts when sitting on the saddle to do the exercises.

The right pedal (19) is marked with the letter (R).

This screws onto the right-hand crank, also marked with an (R), in a clockwise direction.

TightensecurelyFig.10.

The left pedal (18) is marked with the letter (L). This screws onto the left-hand crank, also marked with an (L), in an anti-clockwise direction. Tighten securely Fig.10.

Loosen the saddle height control knob (83) a little, turning it anti-clockwise and then pulling it back, when the saddle is at the right height release the control knob and this will lock back into the holes on the saddle post. Tighten the control knob by turning it clockwise.

9.-LEVELLING.-

Once the unit has been placed into its final position for doing exercise, make sure that it sits flat on the floor and that it is level. This can be achieved by screwing the adjustable support

blocks (23) up or down.

The appliance is equipped with wheels (48) making it easier to move about. The two wheels at the front of the appliance make it easy to store the machine away, as shown in Fig.12.

MAINS CONNECTION.-

Insert the jack on the transformer into the connection hole on the main body and then plug the transformer into a 220 V mains supply, Fig.11.

Do not hesitate to get touch with the Technical Assistance Service if you have any queries by phoning customer services (see last page in manual)

BH RESERVES THE RIGHT TO MODIFY THE SPECIFICATIONS OF ITS PRODUCTS WITHOUT PRIOR NOTICE

Français

IMPORTANTES CONSIGNES DES SECURITÉ.-PRECAUTIONS.

VOORZORGSGMAATREGELEN.

To order replacement parts: State the part code and Quantity

To order replacement parts: State the part code and Quantity

Toll free: +1 866 325 2339

No.80, Jhongshan Rd.,

Daya Dist.,

Taichung City 42841,

Taiwan. R.O.C.

Tel.: +886 4 25609200

Fax: +886 4 25609280

e-mail: info@bhfitness.pt

BH SERVICE PORTUGAL

Tel.: +351 234 729 510

e-mail: info@bhfitness.pt

BH FITNESS MEXICO

BH Exercycle de Mexico S.A. de

CV

Eje 132/136

Zona Industrial, 2A Secc.

78395 San Luis Potosí

S:L:P: MÉXICO

Tel.: +52 (444) 824 00 29

Fax: +52 (444) 824 00 31

www.bhlatam.com.mx

BH FITNESS CHINA

BH China Co., Ltd.

Block A, NO.68, Branch Lane

455, Lane 822,

Zhen Nan RD., Li Zi Yuan,

Putuo, Shanghai 200331, P.R.C.

Tel: +86-021-5284 6694

Fax:+86-021-5284 6814

e-mail: info@i-bh.cn

BH GERMANY GmbH

Grasstrasse 13

45356 ESSEN

GERMANY

Tel: +49 2015 997018

e-mail:

technik@bhgermany.com

BH FITNESS UK

Tel: 02037347554

e-mail:

sales.uk@bhfitness.com

AFTER SALES - UK

Tel.: 02074425525

e-mail:

service.uk@bhfitness.com

BH FITNESS FRANCE

SAV FRANCE

Tel: +33 0810 000 301

Fax: +33 0810 000 290

savfrance@bhfitness.com

BH SE RESERVRA EL DERECHO A MODIFICAR LAS ESPECIFACIONES DE SUS PRODUCTOS SIN PREVIO AVISO.

SPECIFICATIONS MAY BE CHANGED WITHOUT PRIOR NOTICE DUE TO OUR PROGRAMME OF CONTINUOUS PRODUCT DEVELOPMENT.

BH SE RÉSERVE LE DROIT DE MODIFIER LES SPECIFICATIONS DE SES PRODUITS SANS PREAVIS.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BH FITNESS

Model : H832TFT

Category : Exercise bike