Question 1

How to change the battery of the Outdoorchef Ambri 480 G barbecue?

Accepted Answer

The battery of the ignition system of the Outdoorchef Ambri 480 G is of type AAA (LR03, 1.5 volt).

To replace the battery:

First, check that the existing battery is properly placed in its compartment (if it has slipped out, reinsert it)
If the ignition still does not produce a spark, remove the old battery
Insert a new AAA battery (LR03, 1.5V) into the ignition compartment

Note: The PDF of this manual does not specify the exact steps to access the battery compartment. Please refer to the illustrations and diagrams in the manual to locate this compartment precisely, or refer to the photos that accompany this manual if available.

Question 2

How to cook a bistecca (steak) on the Ascona 570 barbecue?

Accepted Answer

Here’s how to cook a bistecca (steak) with your Outdoorchef Ascona 570 barbecue:

Preparation

Preheat the barbecue for 10-15 minutes to reach the optimal temperature
Use the large burner (8.50 kW) set to maximum power for the initial sear

Cooking

Searing: Place the bistecca in the center of the preheated grill with the lid open. Let it sear for a few minutes to achieve the characteristic grill marks.
Finishing: Reduce the heat to medium, close the lid, and finish cooking to your desired doneness. The barbecue's indirect heat system (thanks to its spherical shape) ensures even cooking.

Practical Tips

Use direct heat in the center of the grill for steaks (this is the ideal mode for small portions like bistecche)
To check for perfect doneness, use the Gourmet Check thermometer (Outdoorchef accessory) rather than relying on appearance alone
The included cast iron plate can also be used for better heat distribution if desired

These settings will ensure a bistecca with a nice golden crust on the outside and cooked to your liking on the inside.

Question 3

Where can I buy a replacement flammenbrucke for the Outdoorchef Australia 425 G?

Accepted Answer

The flammenbrucke (or ponte di fiamma, ponte de flammes) is a common and available spare part. Here’s how to obtain it:

Where to order the flammenbrucke

Authorized Outdoorchef dealers - The manual for the Australia 425 G specifies that spare parts are available from authorized dealers. Check the official list at www.outdoorchef.com
Direct manufacturer - DKB Household Switzerland AG (Outdoorchef), Eggbuhlstraße 28, 8052 Zurich, Switzerland

Useful information for ordering

Before contacting a dealer or the manufacturer, prepare:

The serial number of your barbecue (indicated on the label attached to the device)
The exact model: Australia 425 G
A photo of the damaged part (if applicable)

Note: The manual does not list a specific reference number for the flammenbrucke alone, but authorized dealers have access to the complete catalog of spare parts for this model and will be able to find the correct reference for you.

Question 4

What is the purpose of the removable drip tray under the burners of the Outdoorchef Australia 425 G?

Accepted Answer

The component you found under the burners is most likely the removable drip tray. It is an essential part of the Outdoorchef Australia 425 G barbecue.

Function of the drip tray:

The drip tray collects fats and cooking residues that naturally flow from the food cooked on the enameled steel grill. It accumulates during cooking to prevent fats from falling directly onto the bottom of the barbecue or burning under the burners.

Installation and use:

The drip tray must be pushed in until it stops before each use, ensuring that it is correctly positioned under the burners.
After each cooking session, wait for the barbecue to cool down, then gently remove the drip tray.
Completely empty the contents (fat and residues) into an appropriate recycling bin.
Clean the drip tray with warm soapy water and a cloth, then dry it before reinstalling.

Regular cleaning of the drip tray extends the life of your barbecue by preventing the buildup of deposits that could damage the system or create health risks.

Question 5

What type of thread is used for the gas connection of the Roma grill?

Accepted Answer

The Roma manual does not explicitly specify the type of thread (M or British Standard) for the main gas connection. However, the grill comes with a pre-assembled hose and regulator.

Specifications of the supplied gas hose according to the region:

France: NORMAGAZ, NFD-36-101, diameter 6 mm, length 90 cm
Switzerland: PVC DIN-DVGW, 6 bar, length 90 cm

The Roma operates with LPG gas 30/31 (butane or propane) at the following pressures: butane 28 mbar, propane 37 mbar. The manual recommends checking for leaks after each bottle connection.

If you need to replace the hose or use a different fitting, we recommend contacting Outdoorchef customer service with the product's serial number to obtain the exact thread specifications.

Question 6

Where is the electric ignition button on the Outdoorchef Ambri 480 G barbecue?

Accepted Answer

The electric ignition button on the Outdoorchef Ambri 480 G barbecue is a black button located on the control console (the control panel) of the barbecue, near the gas adjustment button.

To locate the ignition button: it is found on the front part of the barbecue where the control elements are grouped. It is the black button dedicated to the piezoelectric ignition. On this console, you will also see the gas adjustment button and the symbols corresponding to the different power settings.

How to use the ignition button: Start by opening the gas supply on the bottle and lifting the lid of the barbecue. Then press the gas adjustment button and turn it counterclockwise until ignition (indicated by a small flame on the panel). While holding this setting, press firmly and hold down the black ignition button until the spark occurs and the gas ignites, which usually takes 2 to 5 seconds.

If it does not ignite: If the burner does not light after 3 seconds, release the ignition button, reposition the gas button to the off position (position 0), wait 2 minutes for the unburned gas to dissipate, and then try again. Ensure that the battery (type AAA, 1.5V) of the ignition system is properly inserted and in good condition.

The black ignition button generates a spark through piezoelectricity when activated, which ignites the gas if there is a sufficient gas flow. If sparks do not occur, check the distance between the electrode and the burner (it should be between 5 and 8 mm) and ensure that the wires of the electric ignition are properly connected.

Question 7

How to light the Outdoorchef Ambri 480 G barbecue?

Accepted Answer

To light your Outdoorchef Ambri 480 G barbecue, which has a single circular burner and a one-touch electric ignition, follow these simple steps:

Before lighting:

Open the barbecue lid. Important: never light the barbecue with the lid closed.
Ensure that the gas bottle valve is closed before starting.

Ignition procedure:

Open the gas supply by turning the gas bottle valve to the left (open position).
Press the gas adjustment button and turn it counterclockwise to increase the power.
Press the black ignition button and hold it down until you hear a clicking sound and the gas ignites. This usually takes a few seconds.

If the burner does not ignite:

If the gas does not ignite after 3 seconds, immediately turn the gas adjustment button to the closed position (zero).
Wait 2 minutes for the unburned gas to dissipate.
Repeat the procedure. You have three attempts to light the barbecue safely.

In case of impossible ignition:

Check that the gas bottle valve is fully open.
Make sure there is enough gas in the bottle.
Check that the electric ignition battery (type AAA, LR03 1.5 Volt) is properly in place and functional. Replace it if necessary.
Ensure that the spark jumps properly between the electrode and the burner. The gap should be 5 to 8 mm.
If you have a long match or lighter, you can use it as an alternative by bringing it close to the burner opening before turning the gas button.

Once the burner is lit, the integrated thermometer in the lid will allow you to monitor the temperature, which can reach up to 340°C. You can adjust the power by turning the gas adjustment button. Don't forget to use the patented EASY FLIP system to easily switch between direct and indirect cooking.

Question 8

How to assemble the Outdoorchef Ambri 480 G barbecue?

Accepted Answer

Assembling the Ambri 480 G barbecue requires method, but the operation is simple if you follow these steps in order. The barbecue weighs about 20 kg and measures 60 x 75 x 105 cm once assembled. Before you begin, clear a flat and stable space, and check that you have all the components by comparing them to the list in the manual.

Preparing the workspace: Place the base of the barbecue on a solid and flat work surface to assemble the cart. Then, position the sphere (the body of the barbecue) on the cart so that it rests well and is balanced. Ensure that the surrounding space has good air circulation, as the barbecue produces significant heat.

Mechanical assembly: Proceed step by step by tightening all joints and screws firmly, without excessive force. Install the cooking grill according to the direction indicated by the illustrations in the PDF (it should be horizontal and well-centered). Install the thermometer in the lid if it is not already integrated, then position the EASY FLIP system (the heat distribution funnel) according to its neutral position. Check that the lid opens and closes freely, without excessive friction.

Connecting the gas bottle: Position the gas bottle (maximum capacity 8 kg) on the designated support under the cart. Secure it firmly with the provided retaining strap or clamp to prevent any movement. Connect the gas hose to the pressure regulator, then to the gas inlet of the barbecue. Tighten all connections by hand first, then finalize them gently with an appropriate wrench (do not over-tighten). Ensure that the regulator is closed before opening the bottle valve.

Mandatory leak test: Before any use, slightly open the valve of the gas bottle to pressurize the circuit. Prepare a soapy solution (50% water, 50% liquid soap) and brush it on all connections: bottle valve, regulator, hose, gas inlet of the barbecue, and burner connector. The appearance of small bubbles indicates a leak; tighten the connections or replace defective parts if tightening is not sufficient. Repeat the test until no bubbles appear.

Final checks before use: Ensure that the regulator is in the closed position (symbol 0 or OFF). Completely close the bottle valve. Test the ignition with a vent before cooking (slightly open the regulator, press the ignition button for a few seconds, then close). Finally, position the barbecue in its final location maintaining a minimum distance of 1.50 m from any flammable object (walls, fences, trees, garden furniture, etc.), and ensure free air circulation around the barbecue.

After these steps, your Ambri 480 G barbecue is ready to operate. If you get stuck at a specific step, refer to the illustrations in the provided PDF on this page.

Question 9

Where can I find the serial number of the Outdoorchef Ambri 480 G barbecue?

Accepted Answer

To locate the serial number of your Outdoorchef Ambri 480 G barbecue, here are the most common places where it can be found:

Inside the lid: open the barbecue lid and check for a label or sticker affixed inside.
On the body of the barbecue: inspect the sides and back of the barbecue for a nameplate or sticker.
Near the gas connection: often, the serial number is placed near the gas hose connection.
Under the barbecue: turn over or look under the barbecue structure to find a label.

If the area is poorly lit, use a flashlight to better see the inscriptions. The serial number is usually a unique combination of numbers and letters that identifies your appliance.

Question 10

How to set up the Outdoorchef Ambri 480 G barbecue for direct heat cooking?

Accepted Answer

To set up your Outdoorchef Ambri 480 G barbecue for direct heat cooking, follow these simple steps:

1. Preparing the barbecue

Make sure the cooking grate is clean and in place.
Open the lid to allow for good air circulation.

2. Igniting and adjusting the burners

Open the gas supply and ignite the burners according to the manufacturer's instructions.
Set the burners to high power to reach a high and consistent temperature.

3. Preheating

Allow the barbecue to preheat for about 10 to 15 minutes with the lid closed.

4. Cooking with direct heat

Place the food directly on the grate above the lit burners.
This method is ideal for quickly searing meats, fish, or vegetables.
Monitor the cooking and turn the food regularly to avoid burning.

By following these steps, you will be able to fully enjoy direct heat cooking on your Outdoorchef Ambri 480 G.

User manual Outdoorchef Barbecue : user manuals and guides in PDF

Models Outdoorchef Barbecue most viewed

Other categories Outdoorchef

Recent questions about Barbecue Outdoorchef