How to synchronize the indoor thermometer with the outdoor sensor?

Question

Accepted Answer

The Bearware 304273 weather station automatically establishes a connection with the outdoor sensor during initial setup. Here’s how to proceed:

Automatic setup:

If synchronization does not occur automatically:

Use the CHANNEL button to switch the reception channels
Press and hold the CHANNEL button for 3 seconds to activate manual signal reception
Ensure that the batteries of the outdoor sensor are in good condition
Check that both devices are within range of each other and without major obstacles

Once synchronized, the indoor thermometer will display the temperature and humidity data received from the outdoor sensor.

User manual Bearware Weather Station : user manuals and guides in PDF