Question 1

What are the dimensions of the freezer compartment of the VALBERG SBS 442 E W742C?

Accepted Answer

The VALBERG SBS 442 E W742C features a freezer compartment cooled by automatic air circulation, with several drawers and removable shelves (3 shelves available at different positions).

Exact dimensions of the compartment: The product technical document does not provide the exact dimensions or the isolated volumetric capacity of the freezer compartment. The overall dimensions of the appliance are approximately 91 x 180 x 70 cm (W x H x D), but the manual does not detail the specific size of the compartment.

Freezing capacities:

Recommended operating temperature: -18 °C
Adjustment range: from -14 °C to -22 °C
Super Freezing mode: operates at minimum temperature for about 50 hours for quick freezing

Note: The 2-star balcony (temperature between -12 and -18 °C) is not suitable for storing ice cream. To know the freezing capacity in 24 hours or the exact dimensions of the compartment, refer to the nameplate of your appliance or contact VALBERG service.

Question 2

How do I adjust the temperature of the refrigerator and freezer?

Accepted Answer

The VALBERG SBS 442 E W742C has two independent buttons to adjust each compartment. The A button (on the left) controls the freezer and allows you to set the temperature from -14 °C to -22 °C, while the B button (on the right) sets the refrigerator temperature between 2 °C and 8 °C or turns it off (OFF).

Recommended settings at startup:

Refrigerator: 3 °C
Freezer: -18 °C

After activation, if the OK symbol does not appear on the refrigerator display, lower the thermostat to 2 °C. The appliance memorizes your settings immediately.

Adjustment according to your environment: in very hot environments (32 °C), set the freezer to -19 °C for better energy efficiency. These settings are averages for the entire compartment; temperatures may vary slightly depending on the positioning of food and the frequency of door openings.

Specialized modes available via button C: the ECO mode reduces energy consumption, SUPER COOLING operates the refrigerator at its minimum temperature for 2 to 3 hours (useful before a shopping trip or for quick cooling), and SUPER FREEZING freezes the freezer to its maximum for about 50 hours. After the duration of the specialized mode, the appliance automatically returns to your previous setting.

With these recommended settings, optimal preservation is a maximum of 3 days in the refrigerator and 1 month in the freezer.

Question 3

Why is my Valberg SBS 529 WD refrigerator not cooling anymore?

Accepted Answer

If your Valberg SBS 529 WD refrigerator is not cooling anymore, start with the simplest checks before considering technical intervention. Several common causes may be behind the problem.

Priority electrical checks: First, ensure that the appliance is properly plugged in. Check that the power cord is securely inserted into the outlet and that the circuit does not have a blown fuse. If the appliance is connected to a circuit breaker, check that it has not tripped to the OFF position.

Thermostat and operating modes check: Ensure that the refrigeration compartment is not in the OFF position. Press the adjustment button on the right side of the control panel to set the temperature between 2°C and 8°C. Also, check the operating mode selected on the LED display (SMART, ECO, SUPER COOLING, or SUPER FREEZING). The SUPER COOLING mode only works for about 2 hours, so it may have automatically reverted to its previous setting.

Door seal: A damaged or misaligned door seal allows cold air to escape, significantly reducing cooling efficiency. Inspect the door seal on both compartments (refrigerator and freezer). Ensure that nothing is preventing the doors from closing completely and that they seal tightly.

Installation and environment: The appliance should not be installed directly exposed to sunlight or near heat sources such as radiators or cooktops. Also, ensure that the appliance is perfectly level by adjusting the feet located at the bottom of the appliance. An improperly leveled installation can affect the cooling system. Leave at least 50 mm of free space on the right, left, and back of the appliance for proper air circulation.

Overloading and operating conditions: Do not place hot foods or liquids that evaporate in the refrigerator. If you have recently placed a large quantity of hot foods, temporarily set the thermostat to a colder position and wait 24 hours. Also, avoid frequently opening the doors or leaving them open for long periods.

If after these checks the appliance still does not cool properly, the cooling system may require intervention from a qualified electrician. Contact Valberg's customer service or Electro Dépôt (official distributor) for repair. This appliance comes with a 2-year warranty from the date of purchase upon presentation of the receipt.

Question 4

Why does my VALBERG SBS 529 WD F X742C or SBS 529 WD E X742C beep when the door is closed?

Accepted Answer

If your VALBERG SBS 529 WD F X742C or SBS 529 WD E X742C is beeping while the door is properly closed, several causes may be responsible:

1. Door closed detection issue

The door sensor or switch may be faulty or misaligned. This prevents the appliance from recognizing that the door is fully closed, triggering an alert beep.

Check that the door seal is clean, intact, and properly positioned.
Ensure that no objects are obstructing the complete closure of the door.

2. Door alarm system

Some models emit a beep if the door has been open for too long, even if it is now closed. The beep may persist for a few moments after closing.

3. Internal temperature issue

A beep may also indicate an abnormal internal temperature (too high or too low) that requires adjustment or inspection of the cooling system.

4. Technical defect

If none of the previous causes seem to be the issue, an electronic malfunction or internal defect may be causing this beep. In this case, technical intervention may be necessary.

Practical tips:

Check that the door is properly closed and the seal is in good condition.
Ensure that nothing is obstructing the door.
Monitor the displayed temperature and adjust if necessary.
If the beep persists without apparent reason, contact an authorized repair service.

Question 5

How to set the temperature of the Valberg SBS 529 WD refrigerator?

Accepted Answer

To set the temperature of your Valberg refrigerator model SBS 529 WD, follow these simple steps:

1. Locate the thermostat

The thermostat is usually located inside the refrigerator, often on a side wall or at the back. Depending on the model, it may be:

a rotary knob with graduations,
a digital control panel with "+" and "-" buttons.

2. Set the temperature

If it is a rotary knob: Turn it to the right to lower the temperature (make the fridge colder) and to the left to raise it (make the fridge less cold).
If it is a digital display: Press the "+" or "-" buttons to select the desired temperature.

3. Wait for stabilization

After changing the temperature, wait several hours (about 4 to 6 hours) for the refrigerator to reach the new set temperature.

4. Check the temperature

To ensure that the setting is correct, you can use a food thermometer placed inside the refrigerator. The ideal temperature is generally between 0°C and 4°C to keep your food in good condition.

By following these steps, you will be able to easily adjust the temperature of your Valberg SBS 529 WD refrigerator for optimal food preservation.

User manual VALBERG American fridge : user manuals and guides in PDF

Models VALBERG American fridge most viewed

Other categories VALBERG

Recent questions about American fridge VALBERG