Q: How does the water drainage work on the VALBERG DH 60 EX 756C hood if the appliance is not connected to the outside?

The VALBERG DH 60 EX 756C is a kitchen hood , not a dehumidifier. Therefore, it is not equipped with a water reservoir for condensation. This hood operates in two distinct modes: external drainage or indoor air recycling mode. Drainage mode (outlet to the outside) If your kitchen has an air outlet to the outside, the hood can be connected to it. First, attach the backdraft damper to the air outlet of the hood, then connect a flexible extraction duct (made of aluminum or another non-flammable material, diameter 150 mm) to the damper. The duct expels steam, grease, and cooking odors outside. No water reservoir is involved: the humid air escapes directly outside. Recycling mode (without external drainage) If you do not have an outlet to the outside, you can convert the hood to recycling mode by installing activated carbon filters. Ask your dealer for the appropriate filters. The air drawn in passes through the metal grease filter (to be cleaned monthly to avoid fire risks), then through the activated carbon filter that retains odors. The purified air is then released back into the kitchen. No water reservoir, no external drainage needed. Essential maintenance In both modes, the grease filter must be cleaned every month with a household cleaning product. This is essential to maintain the hood's efficiency and prevent fire risks. In recycling mode, the activated carbon filter should be replaced once a year depending on your usage frequency. Installation Install the hood 65-75 cm above the cooking surface for optimal operation. It is equipped with touch controls to adjust the fan speed (3 levels + boost mode), and two LED modules for lighting your cooking area.

Question 1

How does the water drainage work on the VALBERG DH 60 EX 756C hood if the appliance is not connected to the outside?

Accepted Answer

The VALBERG DH 60 EX 756C is a kitchen hood, not a dehumidifier. Therefore, it is not equipped with a water reservoir for condensation. This hood operates in two distinct modes: external drainage or indoor air recycling mode.

Drainage mode (outlet to the outside)
If your kitchen has an air outlet to the outside, the hood can be connected to it. First, attach the backdraft damper to the air outlet of the hood, then connect a flexible extraction duct (made of aluminum or another non-flammable material, diameter 150 mm) to the damper. The duct expels steam, grease, and cooking odors outside. No water reservoir is involved: the humid air escapes directly outside.

Recycling mode (without external drainage)
If you do not have an outlet to the outside, you can convert the hood to recycling mode by installing activated carbon filters. Ask your dealer for the appropriate filters. The air drawn in passes through the metal grease filter (to be cleaned monthly to avoid fire risks), then through the activated carbon filter that retains odors. The purified air is then released back into the kitchen. No water reservoir, no external drainage needed.

Essential maintenance
In both modes, the grease filter must be cleaned every month with a household cleaning product. This is essential to maintain the hood's efficiency and prevent fire risks. In recycling mode, the activated carbon filter should be replaced once a year depending on your usage frequency.

Installation
Install the hood 65-75 cm above the cooking surface for optimal operation. It is equipped with touch controls to adjust the fan speed (3 levels + boost mode), and two LED modules for lighting your cooking area.

Question 2

What are the dimensions and the position of the electrical connection of the VALBERG CIH 90 EGK 302C oven?

Accepted Answer

The VALBERG CIH 90 EGK 302C oven has standard dimensions suitable for built-in installation. Here are the detailed information regarding its dimensions and the position of the electrical connection:

Dimensions of the VALBERG CIH 90 EGK 302C oven

Height: approximately 59.5 cm
Width: approximately 59.5 cm
Depth: approximately 56 cm

These dimensions should be considered when preparing the installation location to ensure a perfect fit.

Position of the electrical connection

The electrical connection is generally located at the back of the appliance, slightly offset to the right or left depending on the exact model.
This is a standard single-phase connection for an electric oven, requiring a power supply of 230 V.
It is advisable to ensure easy access to this connection to facilitate wiring and maintenance.

For a compliant and safe installation, it is important to adhere to current electrical standards and, if necessary, to consult a qualified professional.

User manual VALBERG Basket : user manuals and guides in PDF

Models VALBERG Basket most viewed

Other categories VALBERG

Recent questions about Basket VALBERG