The blades detach from the motor shaft during operation, how can I fix this problem?

Q: The blades detach from the motor shaft during operation, how can I fix this problem?

Immediately stop the device if the blades detach during operation. Never let the robot run with a poorly secured accessory. Correcting the blade installation According to the VALBERG VB-FP1220BK manual, here is the correct procedure: First, place the removable drive sleeve on the motor shaft at the center of the bowl Then install the blades onto this sleeve Start the device and turn it slowly until the blades snap into place completely Most common cause The drive sleeve is often misaligned or not pushed down far enough on the shaft. Before each use, check that the sleeve is securely locked and that the blades are properly fitted onto it. This is the main reason for detachment during operation. If the problem persists If you have followed this procedure and the blades continue to detach, the motor shaft or the drive sleeve may be damaged and require replacement. In this case, contact VALBERG customer service to obtain the address of the nearest authorized repair center.

Question

Accepted Answer

Immediately stop the device if the blades detach during operation. Never let the robot run with a poorly secured accessory.

Correcting the blade installation

According to the VALBERG VB-FP1220BK manual, here is the correct procedure:

First, place the removable drive sleeve on the motor shaft at the center of the bowl
Then install the blades onto this sleeve
Start the device and turn it slowly until the blades snap into place completely

Most common cause

The drive sleeve is often misaligned or not pushed down far enough on the shaft. Before each use, check that the sleeve is securely locked and that the blades are properly fitted onto it. This is the main reason for detachment during operation.

If the problem persists

If you have followed this procedure and the blades continue to detach, the motor shaft or the drive sleeve may be damaged and require replacement. In this case, contact VALBERG customer service to obtain the address of the nearest authorized repair center.

User manual VALBERG Multifunction robot : user manuals and guides in PDF

Models VALBERG Multifunction robot most viewed

Other categories VALBERG

Recent questions about Multifunction robot VALBERG