MSW-26 - Hair Dryers MPM - Free user manual and instructions

USER MANUAL MSW-26 MPM

EN W/We wish you satisfactor from using the product and invite you to check a wide range of other MPM applications

Brushless BLCD motor - 110,000 RPM / AI - intelligent warm and cool airflow /Gentle program for drying pet fur / Automatic filter cleaning /Magnetic attachments / 3-level temperature and airflow adjustment /Memory for settings / Ionization

BEZPECNOSTNI POKNY PRIPOUZIVANI

-Read the instructions carefully before use.
-Do not handle the device with wet hands.
- Take special care when children are near the device.

• Do not use the device for purposes other than those for which it was intended.

• Do not immerse the device, cable or charger in water or other liquids.
  -Do not leave the device unattended during operation.

• Always remove the plug from the mains socket when not in use or before cleaning.

• Never use a damaged device, including one with a damaged cord or plug, in which case have it repaired at an authorised service centre.

-Do not use the device outdoors.

• Do not hang the power cable on sharp edges or allow it to come into contact with hot surfaces.

• Do not place the device neither on hot surfaces, nor in close proximity of other electric devices, e.g. cookers, burners, ovens, etc.

• The device should be put on a dry, flat and stable surface.

• The device is intended for domestic use only.

• Always ensure that all parts of the device are correctly fitted before starting work.

• Use of accessories not recommended by the manufacturer may cause damage to the device, fire or personal injury.

• This equipment may be used by children of at least 8 years of age and by persons of diminished physical, mental capacity and lack of experience and knowledge of the equipment if supervision or instruction is provided regarding the safe use of the equipment so that the hazards involved are understood. Unsupervised children should not perform cleaning and maintenance of the equipment.

• Children should be supervised to ensure that they do not play with the equipment/device.

• Keep the device and its cord out of reach of children under 8 years of age.

• Do not pull the plug out of the power socket by pulling the cord.

• The equipment is not designed to operate using external timers or a separate remote control.

-Do not connect the plug to the power socket with wet hands.

• For the safety of children, please do not leave freely accessible parts of the packaging (plastic bags, cardboard boxes, polystyrene, etc.).

• WARNING! Do not allow children to play with the film. Danger of suffocation!

• Check that the power parameters on the device's rating plate correspond to the parameters of your power supply network.

• CAUTION! Before starting cleaning and maintenance works, disconnect the device from the power supply network and wait until it cools down completely after work. Do not submerge the device into water!

• CAUTION! Do not use sharp objects, abrasive polishes, solvents or other strong chemicals for cleaning since their use may cause damages to the device.

• Keep the appliance away from water!

• Do not use when taking a bath/shower!

• If the device accidentally falls into water, immediately disconnect the plug from the power socket!

• While drying, be careful not to let hair become caught in the air inlet and outlet holes.

• Do not direct hot air towards the eyes or other sensitive areas of the body.

• Do not wind the power cord around the device!

• The air outlet and air inlet openings must not be covered!

• For additional protection, it is advisable to install a residual current device (RCD) with a rated residual current not exceeding 30mA in the electrical circuit that supplies the bathroom. A specialist electrician should be consulted in this regard.

• When using a hair dryer in the bathroom, unplug it from the power source after use, as proximity to water is a hazard even when the hair dryer is turned off.

WARNING! Do not use this equipment near water.

WARNING! Do not use this equipment near bathtubs, showers, swimming pools and similar water tanks.

DESCRIPTION OF THE APPLIANCE

1. ON/OFF button

e. cold air mode

1. Blowing speed control button

2. Attachment mounting socket

3. Temperature control button

4. Air filter cover

5. Mode change button

6. Air filter

7. Mode display

8. Mains cable

a. normal mode

1. Focusing cap

b. cleaning mode

1. Turbine cap

c. pet mode

1. Diffuser

d. Al variable mode

BEFORE FIRST USE

1. Remove the device from the box, remove all bags, labels, cardboard profiles and fillers. Make sure the appliance has not been damaged during transport. Contact the seller in case of any doubts.
2. Make sure the electrical mains parameters match the technical data on the appliance's rating plate.

USING THE DRYER

1. Connect the dryer to a power source.
2. Then attach one of the caps (10,11) or the diffuser (12). The hair dryer is equipped with magnetic styling attachments that can be rotated in any direction.
3. Focusing cap (10) - is used for precise hair styling.
4. Turbine cap (11) - 360^ air outlet makes it easier to style hair.
5. Diffuser (12) - provides more control over the hair. It is gentler and smoother on the hair than conventional drying. The diffused heat is ideal for highlighting natural curls and waves or adding volume to hair. Always use caution, as the diffuser may become hot during use.
6. Three temperature adjustments are available on normal mode.
7. cool blowing - one indicator light is on
   warm blow - two indicator lights are on
   · hot blow – three indicator lights are on
8. There are three blowing control speeds available on the cool blowing, purifying and normal modes:
9. light - one indicator light is on
   · medium – two indicator lights are on
10. strong - three indicator lights illuminate
11. Start the dryer with the ON/OFF button (1).
12. Use the change mode button (4) to select the desired mode. The icon of the selected mode will appear on the display (5). The following modes of operation are available:
    a. Cool blowing mode - with the blowing speed control button (2) you can adjust the speed 1-2-3. The blowing temperature control button (3) cannot be adjusted to stay in cold air mode.
    b. Al variable mode - the device works alternately: hot air at speed 3 for 5 seconds then cold air at speed 2 for 2 seconds.

c. Pet mode - the device works steadily on the blowing speed 2 and blowing temperature 2. The speed control button (2) and the blowing temperature control button (3) cannot be adjusted to stay in pet mode.
d. Purification mode - the device will stop for 1 second and then eject cold air through the air filter (8) to clean the filter of dirt. The dryer will run on speed 3 with adjustable 1-2-3. The temperature control button (3) cannot be adjusted to stay in cleaning mode.

All of the above modes can be cycled between each other. If you hold down the temperature control button (3) on the modes listed above you will enter normal mode.

1. To switch to normal mode, hold down the mode change button (4) for about 3 seconds. With the blowing control button (2) and the blowing temperature control button (3), you can adjust the intensity of the blowing and temperatures 1-2-3.
2. The device can be turned off at any time with the ON/OFF button (1). When the dryer is turned on again, it remembers the recently selected parameters.

CAUTION! During use, do not cover the air filter cover (7), which is located on the back of the dryer, as the device can then easily overheat.

The dryer has an overheating protection system - in case of clogging air outlet holes or overheating will automatically turn off. Disconnect the device from the power supply and wait about 10-15 minutes for it to cool down before restarting.

CLEANING AND MAINTENANCE

The device should be kept clean in order to ensure its proper functioning.

Follow the rules below before cleaning.

1. After use always disconnect the device from the power supply.
2. After the dryer has cooled down, wipe the outer part of the casing with a damp cloth.
3. Do not wrap the cord around the appliance, instead wind it loosely at the side.
4. To clean the filter, turn the filter cover counterclockwise. Remove it from the device. Use a cloth or soft brush to remove any debris from both the filter mesh and its cover.
5. Install the filter cover back into place by turning it clockwise.

CAUTION! Do not use sharp objects, abrasive polishes, solvents or other strong chemicals for cleaning since their use may cause damages to the device.

TECHNICAL DATA

Model	MSW-26
Power supply 220-240V ~ 50/60HZ
Power 1600W
Off and standby modes available availability
Standby power consumption -
Power consumption in off-mode 0,12W
Power consumption in network standby mode	-
Automatically enters standby mode after	-
Automatically enters shutdown mode after	-
Network standby mode if the device has an app connection function	-
Length of mains cable	1,8 M

CAUTION! MPM agd S.A. reserves the right to technical changes.

Proper disposal of the product (waste electrical and electronic equipment)

Marking on the product indicates that after the service-life of the product expires, it should not be disposed with other type of municipal waste. Used equipment may have a negative impact on the environment and health of people due to potentially containing hazardous substances, mixtures and components. Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may cause a release of substances that are hazardous to the environment and health.

Used equipment should be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points, the user should contact the municipal point of electronic waste collection or used equipment processing department.

BESCHRIJVING VAN HET APPARAAT

1. AAN/UIT-knop

e. koude lucht modus

TEXHINUECKA XAPAKTEPNUCTNKA

• He trpimaiTe npictpiM oKpIMn pyKaMn.

TEXHIUHIXAPAKTEPNCTNKN

Legible signature of the buyer