PWS-110MG1 - Server SONY - Free user manual and instructions

USER MANUAL PWS-110MG1 SONY

Japanese/English/French/German/Italian/Spanish/Chinese/Korean

1st Edition (Revised 4)

目次

概要 3

3

对应機器 3

对応ドライフ 3

对应 NIC 3

各部の名称と動態 4

前面 4

前面（八不尔を外した场合）

背面 5

準備 6

初期設定 6

APRIKENJ6

7

7

[Settings] - [Show advanced settings...] - [Languages]

• [Language and input settings...] 为表示让言語の

10GBASE-SR/LR (Add-in Card) 1)2

1)本機以接續載在的末末力一

Intel Ethernet Converged Network Adapter X520-DA1

System Configuration and Connection 11

Supported Devices 11

Supported Drives. 11

Supported NIC 11

Name and Function of Parts. 12

Front View 12

Front View (Panel Removed). 12

Rear View. 13

Setting Up. 14

Initial Settings 14

Starting and Exiting the Application. 14

Application Settings. 15

System Settings 15

Maintenance Web Application Operation 15

Usage Precautions 16

Specifications 16

For safety, please read the precautions described in the PWS-110 Operation Guide (supplied).

Overview

The PWS-110MG1 is a system that uses PWA-MGW1 Media Gateway Software for archiving files stored on a server in a 4K-Live system to media and for retrieving files stored in media. Optical disc archive cartridges, Professional Discs, SxS memory cards, hard disk drives, network drives, and XDCAM devices can be used as the storage media.

For details about operation, refer to the Help in PWA-MGW1.

System Configuration and Connection

The unit connects to a server using Ethernet, and drive units connect to USB ports of the unit.

Notice to customers

Installation of the unit should be performed by your Sony service personnel or a technician who has received service training.

Supported Devices

Operation with the following devices has been certified.

Supported Drives

Operation with the following drives has been certified.

ODS drives

ODS-D55U

ODS-D77U

ODS-D280U

Professional Disc drives

• PDW-U1
• PDW-U2

SxS memory card USB reader/writers

SBAC-US10
- SBAC-US20
SBAC-US30
SBAC-UT100

Supported NIC

Operation with the following 10 GbE network card has been certified.

Intel Ethernet Converged Network Adapter X520-DA1

Name and Function of Parts

Front View

On/Standby button and indicator

Switches the unit on/off (standby state). Connecting the power cord places the unit in standby state, and the indicator turns on red. Pressing the On/Standby button while in standby state turns on the unit and the indicator turns on green. Pressing and holding the On/Standby button for two seconds switches the unit to standby state, and the indicator changes to red. To turn the unit on again after switching from On state to standby state, when the indicator is red, press and hold the On/Standby button for three seconds or longer. The indicator goes out when the power cord is disconnected.

2SYSTEM indicator

Indicates the status of the unit.

Green: Operating normally

Flashing green (once per second): System is booting or transitioning to standby state.

Flashing orange (once per second): A warning has been generated.

High-speed flashing read (four times per second): An error has occurred.

Front panel LED

Turns on according to settings in the web application. The LED is configured using [001: LINE LED] in the [Settings] page on the Maintenance screen.

4USB connectors (front panel)

Connects to a keyboard and mouse for initializing the unit. USB devices not described in this document are not supported.

Notes

Both USB ports on the front panel support power delivery (900mA)
- Use SuperSpeed USB cables.

Front View (Panel Removed)

When the SYSTEM indicator or web application indicates an error, you can remove the front panel to check the status of the hardware components.

To remove the front panel, loosen the screws on the left and right sides and pull the panel towards you.

FAN indicators

If any of the fans fail, the corresponding fan indicator turns on red.

2 POWER indicators

If either of the AC power supply units fail, the corresponding indicator turns on red.

③TEMP indicator

If an abnormally high temperature is detected within the unit, the indicator turns on red.

Rear View

SYSTEM TC connector

Not used by this system.

Remote connectors (1/2, 3/4, 5)

Not used by this system.

AC power supply units

Insert the power cords and connect to power outlets. Only one AC power supply unit is installed at the factory. A second optional power supply unit can be installed to provide power supply redundancy. When used in systems that require reliability, power supply redundancy allows the unit to continue operating even if a power supply unit fails.

For details about installing or replacing a power supply unit, consult your Sony sales or service representative.

4SFP+ slot

Attach to an SFP + module.

USB connectors (rear panel)

Connect to drive units using USB cables.

USB devices not described in this document are not supported.

Notes

• Of the four USB connectors on the rear panel, only the bottom right port supports power delivery (900 mA). The other three ports do not support power delivery, and should be used to connect USB devices that do not require power supplied from the USB connector.
• Use SuperSpeed USB cables.

6LAN connectors

Connect to a Gigabit Ethernet network.

7HDMI connector

Connect to a monitor using an HDMI cable.

Use an HDMI cable that conforms to the following standard.

• High Speed HDMI Cable (Premium High Speed HDMI Cable)

③DisplayPort connector

Connect to a monitor using a DisplayPort-to-DVI converter cable or DisplayPort-to-HDMI converter cable. Use an active-type converter cable.

Note

Use a DisplayPort cable that conforms to the following standard.

• DP v1.2a (compliant)

Ground terminal

Connect to ground.

Setting Up

Initial Settings

Before using the unit, configure the Windows settings within the unit. The description below describes the standard settings in Windows.

Note

To reboot the unit, first shut down the unit and then turn the On/Standby button on the front panel on again, without rebooting Windows.

1 Connect a keyboard and mouse to the USB connectors on the front panel, and connect a monitor to the DisplayPort connector or HDMI connector on the rear panel.
2 Turn the On/Standby button on.
3 When the Windows login screen appears, enter "mgw" as the user name and "mgw" as the password.
4 When the password setup screen appears, configure a new password and log in.

Configuring the network

1 Connect a LAN cable to the LAN connector on the rear panel of the unit, and connect the other end to the network.
2 Click [View network status and tasks] under [Network and Internet] in the control panel.
3 Click the device connected by LAN cable in [Connections].
4 Click the [Properties] button.
5 Select [Internet Protocol Version 4 (TCP/IPv4)], then click the [Properties] button.
6 Change the IP address and other settings.
7 Click the [Advanced] button to configure DNS, WINS, and other settings.
8 When finished, click the [OK] button.

Setting the date and time

1 Select [Set the time and date] under [Date and Time] in the [Clock, Language, and Region] control panel.
2 Click [Change time zone] on the [Date and Time] tab, and select the time zone.
3 Click [Change date and time] on the [Date and Time] tab, and set the date and time.
4 Click the [Change settings] button on the [Internet Time] tab.
5 Specify an NTP server, then click the [Update Now] button.
6 Place a check mark in [Synchronize with an Internet time server] to periodically correct the clock using the NTP server.

Signing out

When finished, sign out from Windows.

1 Move the mouse cursor to the top right corner of the screen to display the Charms bar, then click [Start].
2 Click the account name on the top right of the screen, then click [Sign out].

Starting and Exiting the Application

Starting PWA-MGW1

1 Turn on the unit.
2 Launch Google Chrome.
3 Enter the "localhost:8080" URL in the address bar and press the Enter key.

If the login screen does not appear In the Chrome menu, click [Settings] > [Show advanced settings...] > [Reset browser settings] to reset the browser.

4 Enter your user ID and password to log in.

Notes

• PWA-MGW1 does not support the sleep function. You should ensure that the unit does not go to sleep during operation.
• To change the Help interface language (English/Japanese/Chinese), change the Language setting in Google Chrome. In the Chrome menu, click [Settings] > [Show advanced settings...]

[Languages] > [Language and input settings...] and drag the desired language to the top of the list.

Exiting PWA-MGW1

1 Exit Google Chrome.

PWA-MGW1 does not terminate when exiting Google Chrome.

To terminate PWA-MGW1 before exiting Google Chrome, click the [Terminate] button on the Maintenance page of the Settings screen.

Application Settings

Launch the application and configure the required system settings.

For details about configuration, refer to the Help in PWA-MGW1.

System Settings

Configure the system settings on the Maintenance screen in the web application.

For details about the Maintenance screen, see "Maintenance Web Application Operation" on page 15.

Maintenance Web Application Operation

For details about the operation of the Maintenance Web Application for system administrators, log in to the unit and click the shortcut icon on the desktop to refer to the Operation Manual.

Usage Precautions

Power supply precautions

If the unit is suddenly turned off during operation, data loss may occur. To maintain data integrity, the use of an uninterrupted power supply (UPS) is recommended. To disconnect the power cord or turn off the breaker, always press the On/Standby button on the unit to stop the unit before proceeding.

USB device precautions

When using the unit when connected to a self-powered USB device (such as the ODS-D77U), the device may not be recognized, depending on the timing of when the device is turned on. If this occurs, turn the USB device off and on again, or disconnect and reconnect the USB cable.

A pop-up may appear in the bottom right of the window when a USB device that supports UASP (USB Attached SCSI Protocol) is connected to the unit. In this case, follow the displayed instructions, temporarily disconnect the USB device, and then reconnect it.

USB devices that support UASP operate using BOT (Bulk-Only Transport).

Specifications

General

Power requirement

100 V to 240 V AC

50/60 Hz

Power consumption

235 W

Standby power consumption

3 Wor lower

Operating temperature

5^ to 35^ (41^ to 95^)

Storage temperature

-20^ to +60^ (-4^ to +140^)

Operating humidity

20% to 90% (relative humidity)

Storage humidity

5% to 80%

Mass 9.7kg (21 lb. 6.2 oz.)

Dimensions 440× 43.6× 507mm (17^3 / 8× 1^3 / 4×

20 in.) (width / height / depth)

CPU

Processor Intel Core i7 6700TE (2.4 GHz)

Memory 8 GBytes

SO-DIMM (DDR4) (2)

Drive (M.2) 120 GBytes

Drives (SSD) PCIe SSD (Add-in Card), 1.2 TBytes or

2.0 TBytes

One of the following PCIe SSDs is connected to the unit.

Intel Solid-State Drive DC P3600 (1.2 TBits)

Intel Solid-State Drive DC P4600 (2.0 TBytes)

For details about PCIe SSDs, visit the following sites.

Intel Solid-State Drive DC P3600

https://ark.intel.com/products/80990/Intel-SSD-DC-P3600-Series1_2TB-12-Height-PCIe-3_0-20nm-MLC

Intel Solid-State Drive DC P4600

https://ark.intcl.com/products/96999/Intel-SSD-DC-P4600-Series

2_0TB-12-Height-PCIe-3_1-x4-3D1-TLC

Expansion bus PCIe Gen2 8Lane (30 W) (2)

Inputs/outputs

LAN RJ-45 (2)

1000BASE-T

100BASE-TX

SFP + (1)

10GBASE-SR/LR (Add-in Card) ^1)2)

1) Network card connected to the unit Intel Ethernet Converged Network Adapter X520-DA1 For information about the network card, visit the following site. http://www.intel.com/support/go/network/adapter/userguide.htm

2) Supported only when SFP+ module is attached.

USB(front panel/rear panel)

Super Speed USB (USB 3.0) Type A (6,2 on front and 4 on rear)

Front: Power delivery support (900 mA/ port)

Rear: Power delivery support on bottom right port (900mA) not supported on other three ports

HDMI Type A (1)

HDMI Ver. 1.4a, 1920× 1200 maximum resolution, 60Hz

DisplayPort DisplayPort(1)

DisplayPort Ver. 1.1a, 2560× 1600 maximum resolution, 60Hz

Supplied accessories

Operation Manual (this document) (1)

Operation Guide (1)

Rack mount screws (4)

Optional accessories

PWSK-101 Optional Power Supply

Design and specifications are subject to change without notice.

Depending on the operating environment, unauthorized third parties on the network may be able to access the unit. When connecting the unit to the network, be sure to confirm that the network is protected securely.

Notes

• Always make a test recording, and verify that it was recorded successfully.
• SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, Either DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE LOSS, REPAIR, OR REPRODUCTION OF ANY DATA RECORDED ON THE INTERNAL STORAGE SYSTEM, RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS.

• SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.

• Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

• Google Chrome is a trademark or registered trademark of Google Inc.

Other products or system names appearing in this document are trademarks or registered trademarks of their respective owners. Further, the or TM symbols are not used in the text.

This Product uses the Source Code of T-Kernel 2.0 under T-License 2.1 granted by TRON Forum (www.tron.org).

For the customers in Taiwan

$$ \text {S O - D I M M} (\text {D D R 4}) (2) $$

PCIc Gen2 8Lane (30 W) (2)

Entrées/Sorties

LAN RJ-45 (2)

1000BASE-T

100BASE-TX

SFP + (1)

10GBASE-SR/LR (Carte d'extension) 1) 2)

1920 × 1200 resolution maximale,

60Hz

DisplayPort DisplayPort (1)

DisplayPort Ver. 1.1a,

PCIc Gen2 8Lane (30 W) (2)

Eingänge/Ausgänge

LAN RJ-45 (2)

1000BASE-T

100BASE-TX

SFP + (1)

PCIc Gen2 8Lane (30 W) (2)

Ingressi/uscite

LAN RJ-45 (2)

1000BASE-T

100BASE-TX

SFP + (1)

PCIc Gen2 8Lane (30 W) (2)

Entradas/salidas

LAN RJ-45 (2)

1000BASE-T

100BASE-TX

SFP + (1)

10GBASE-SR/LR (tarjeta complementaria) 1)2

1920 × 1200 resolution maxima,

60 Hz

DisplayPort DisplayPort (1)

DisplayPort Ver. 1.1a,

2560 × 1600 resolution maxima,

60 Hz

gikaiB3iEeBnB3WbKoEey

HDMI

1 [Clock, Language, and Region] [Date and Time] [Set the time and date] on the time.
2 [Date and Time] [Change time zone] 是精确的，当区间内不能有任何值。
3 [Date and Time] [Changed date and time]
4 [Internet Time] 끼에서 [Change settings]

"Maintenance Web Application 案例" (65 班)

Maintenance Web Application 썸동

Sisssenien

10GBASE-SR/LR (Add-in Card)

The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual.

Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.