WU9934450-8 - Pressure sprayer PARKSIDE - Free user manual and instructions

USER MANUAL WU9934450-8 PARKSIDE

Operation and safety notes

NL BE

DRUKSPROEIER

GB/IE Operation and safety notes Page 18

Proper use. Page 19
Description of parts and features.. Page 20
Technical data . Page 20
Included items.. Page 20

Safety advice. Page 21

General safety advice.. Page 21

Before use.. Page 23

Bringing into use

Filling the pressure sprayer container.. Page 24
Building up the operating pressure . Page 24
Spraying.. 25

Transport of the pressure sprayer.. Page 25

Cleaning and care.. Page 26

Cleaning the pressure sprayer.. Page 26
Store the pressure sprayer.. Page 27

Troubleshooting.. Page 27

Disposal. Page 28

Warranty and service

Service.. 30

List of pictograms used

Safety information Instructions for use

Garden pressure sprayer

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Proper use

The product is used for spraying liquids in the home, garden and greenhouses. The spraying of solvents or solvent-containing liquids or oil is a particular example of improper use of the product. This product is intended for private use only.

The pressure spraying device is used only for spraying the following fluids in the house, garden or in greenhouses.

• Water and non-viscous, water-based or soluble products, including pesticides, herbicides, insecticides, fungicides and fertilisers,
• Mild cleaners with neutral pH level

The sprayed agent may only be sprayed in the concentration specified by the manufacturer of the agent. If in doubt, consult the manufacturer of the agent. The pressure spraying device is designed for private use only.

Incorrect use includes, in particular, the spraying of the following:

• Solvents or liquids containing solvents

• Oil

• Easily flammable fluids
• Corrosive fluids such as acids or lye.

Description of parts and features (Fig. A)

1 Pump handle
2 Spray lock
3 Spray button
4 Handle
5 Safety valve
6 Container
7 Cover

8 Spray nozzle
8a Nozzle holder
9 Pump
10 Flexible hose
11 Weight
12 Level scale

Technical data

Container dimensions ( × H) : approx. 135 × 320 mm

Overall weight, empty: approx. 0.45kg

Capacity: approx. 21

Max. permissible

operating pressure: approx. 2 bar

- Included items

1 Garden pressure sprayer 1 Operating instructions

Safety advice

- General safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device.

WARNING! RISK OF INJURY! There is a risk of injury to the skin resulting from contact with the spray product. Always wear suitable protective clothing, gloves and breathing protection when spraying.

WARNING! The sprayer may not be used if the operator is tired or ill or under influence of alcohol, drugs or medication.

WARNING! Do not carry out any repairs or modifications to the pressure sprayer. Do not change or repair any components.

Wash your hands and face after each spraying session.

CAUTION! RISK OF EXPLOSION! Do not

place the device (empty or full) in direct sunlight!

Always read and observe the information provided by the chemical manufacturer when working with or mixing spray solutions.

Release the residual pressure in the container by pulling the safety valve to the side before you open the container.

Never spray into wind, water, or drinking water source.

Release the residual pressure after each use.

Do not unscrew or remove the safety valve.

The sprayer may not be used if the operator is tired or ill or under influence of alcohol, drugs or medication.

The nozzle hold must not be unscrewed if the tank is still pressurised. Otherwise there is a risk of injury.

Explanation of the symbols used:

2-1 pressure sprayer

Permissible operating pressure: Max. approx. 2 bar

Not for use with corrosive substances!

Do not spray on electrical devices, electrical cables or wires.

Do not spray on people!

Do not spray on animals!

Spray on plants only!

Do not use the product for drinks!

Do not leave the pressurized spraying device standing in the sun. There is a risk of explosion!

Keep away from naked flames and heat sources. Seal containers securely. Store in a fireproof way! Do not use easily flammable fluids!

Protect from frost and store away from frost.

Store at 0^ C - 40^ C in a dry, dust-free location.

Wear a suitable protective suit, gloves and a mask.

Before using for the first time, pls read the instruction carefully.

Before use

CAUTION! Check that the device is functioning properly!

Check the pressure sprayer before each use to ensure that it is free of visible damage and is functioning safely. To do this, carry out the following tests and inspections:

Check the tank 6 and the flexible hose 10 for visible damage.

Check that the flexible hose [10] and the weight [11] are securely connected.

Pump the empty pressure sprayer.

Pull the safety val to the side.

You must be able to hear the pressure escaping.

- Bringing into use

- Filling the pressure sprayer container (Fig. B)

Note: Before using the product, check to see that it is in good condition and free of defects.

Press the pump handle downwards.

Note: Before you open the container pull the safety valve 5 to the side to release any residual pressure still present in the container 6.

Turn the cover in anticlockwise direction and draw it with pump 9 out of the container 6.

Now fill the container

Note: Fill the container 6 with only the amount of liquid that you actually need for that particular spraying session by monitor the level scale 12 (not more than 2 l).

Place the cover with pump back into the container and turn it clockwise as far as it will go.

Building up the operating pressure

Pull the pump handle and move up and down until the pressure sprayer has been pumped up to a pressure not exceeding the maximum permissible operating pressure of 2 bar.

Note: If the pressure of the air in the container exceeds 2 bar, the pressure is automatically released through the safety valve.

Press the pump handle downwards.

Spraying

Hold the hand and direct the adjustable spray nozzle 8 e.g. at a plant.

Note: You can rotate the spray head to change to different spray function: Straight line by rotating anti-clockwise direction (Fig. C1), Mist by rotating clockwise direction (Fig. C2).

CAUTION! Only the front part of the nozzle 8 in brass is used to adjust the spray function! Do not unscrew the whole of the nozzle holder 8 under any circumstances. Otherwise there is a risk of injury.

Note: The flexible hoge and the weight 11 can move flexibly to assist with the uptake of liquid in the tank 6 if the pressure sprayer is held in different positions (Fig. D).

Note: Push the spray bar back to press the spray button 3. The spraying process begins.

Release the spray button to stop the spraying process.

Note: When the pressure in the container is no longer sufficient to spray, pump the container 6 to increase the pressure again up to but not exceeding the maximum permissible operating pressure of 2 bar (see "Building up the operating pressure").

Pull the safety valve to the side as far as it will go to release the residual pressure in the container 6

- Transport of the pressure sprayer

Transport the pressure sprayer as follows:

Transport during use

Carry the pressure sprayer with the hand.

Transport after use

Press the pump handle down.

Pull the safety valve to the side as far as it will release the residual pressure in the container.

Carry the pressure sprayer with hand.

Note: To avoid damage to the container during transport, always lift the pressure sprayer and do not drag it across the ground.

- Cleaning and care

If the nozzle seems to be blocked, do not try to blow it free with your mouth.

Note: Clean the pressure sprayer after each use! Empty the bottle after each use.

- Cleaning the pressure sprayer

Unscrew the nozzle 8 and the nozzle holder 8a.
■ ATTENTION! The nozzle holder 8a must not be unscrewed if the tank 6 is still pressurised. Otherwise there is a risk of injury.
Clean the nozzle 8 under flowing water.
To clean a blocked nozzle 8, use a needle to poke through the nozzle 8.
Remove the cover 7 by unscrewing it anticlockwise from the tank 6. Remove the pump 9, the flexible hose 10 and the weight 11.
- Disconnect the flexible hose and the weight and rinse both under running water.
- Clean the cover 7 including the handle 1 and the pump 9 under running water.

Clean the inside and outside of the tank 6 under flowing water.
Put the flexible hose 10 and the weight 11 back together. Put the cover 7 back onto the tank 6 and turn it clockwise to tighten it.
Dry the product with a cloth.

- Store the pressure sprayer

• Release any residual pressure still present in the container after use. To do this, pull the safety valve button 5 to the side until you can no longer hear the hiss of escaping air.
  Thoroughly clean the device and allow it to dry before you put it away, especially for the winter. This will avoid frost damage.
  Remove any leftover spray product from the container 6
  Store the pressure sprayer in a dry, dust-free place away from frost.

- Troubleshooting

If the measures listed below are not successful, contact the manufacturer.

= Fault
= Potential causes
O = Remedies

- No pressure is established in the container.

The pump is not firmly screwed into place.
Screw the pump firmly into place.

Spray nozzle does not spray.
No pressure present.
Generate pressure using the pump.
The spray nozzle is blocked.
Clean the spray nozzle.
No spray in the container 6
Fill with spray.
The flexible hose 10 and the weight 11 are not connected to each other.
Check and connect.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

The product incl. accessories and packaging materials are recyclable and are subject to extended producer responsibility. Disposethem separately, following the illustrated Info-tri (sorting information), for better waste treatment. The Triman logo is valid in France only.

Warranty and service

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of

this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.

Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.

Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts.

This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Service

Please have the receipt and item number (IAN 437353_2304) ready as your proof of purchase when making an enquiry.

Legendede sditogrammesutilis.. Page 32

Introduction

Transport after drug

Tryk foprst pumpehandtaget 1nedad.