MN5X - Beard trimmer BEURER - Free user manual and instructions

USER MANUAL MN5X BEURER

EN Hair clipper Instructions for use....13

Illustration of an open book with a geometric window and horizontal lines, no text or symbols present

EN Unfold page 3 before reading the instructions for use.

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand holding a tool, with an arrow indicating direction (no text or symbols)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a hand holding a small object with arrows indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Read these instructions for use carefully. Follow the warnings and safety notes. Keep these instructions for use for future reference. Make the instructions for use accessible to other users. If the device is passed on, provide the instructions for use to the next user as well.

WARNING

• The device is only intended for domestic/private use, not for commercial use.
• This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.
• This device contains batteries that are non-replaceable.
• Children must not play with the device.
• Cleaning and user maintenance must not be performed by children unless supervised.

• Under no circumstances should you open or repair the device yourself. If you do so, it may no longer function correctly. Failure to comply will invalidate the guarantee.

• The hand-held part must be disconnected from the connection cable before it is cleaned in water.

• When using the device in the bathroom, unplug the plug after charging as water in the vicinity constitutes a danger, even when the device is switched off.
• Never use the device with the mains adapter near baths, wash basins, showers or other objects containing water or other liquids – risk of electric shock!
• If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk.
• As an additional safety measure, we recommend the installation of a residual-current-operated protective device (RCD) with a rated operational current not exceeding 30 mA in the bathroom circuit. Your local electrical specialist can provide you with the relevant information.

TABLE OF CONTENTS

1. Included in delivery 15
2. Signs and symbols....15
3. Intended use....16
4. Warnings and safety notes......16
5. Device description....18
6. Initial use 18

6.1 Battery mode/charging the battery....18

6.2 Mains operation....18

6.3 Travel lock....18

1. Usage 19

2. Cleaning and maintenance......19

8.1 Cleaning the device 19

8.2 Oiling the stainless steel blade .... 19

1. Accessories and replacement parts.....19

2. Disposal....20

3. Technical specifications 20

4. Guarantee....20

1. INCLUDED IN DELIVERY

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are included in the delivery. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

• 1 hair clippers
• 6 comb attachments (3–25 mm)
• 1 storage bag
• 1 cleaning brush
• 1 cutting oil
• 1 charging cable

2. SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:

DANG

Indicates an imminent danger. If it is not avoided, it will result in death or serious injury.

WARNING

Indicates a potentially impending danger. If it is not avoided, there is a risk of death or serious injury.

CAUTION

Indicates a potentially impending danger. If it is not avoided, slight or minor injuries may result.

NOTICE

Indicates a potentially harmful situation. If it is not avoided, the device or something in its vicinity may be damaged.

Product information

Note on important information

Read the instructions

Manufacturer

Conformity assessed marking for the United Kingdom

Disposal in accordance with the Waste Electrical and Electronic Equipment EC Directive (WEEE)

	Do not dispose of batteries containing harmful substances with household waste
	Marking to identify the packaging material.A = material abbreviation,B = material number:1-7 = plastics,20-22 = paper and cardboard
	CE labellingThis product satisfies the requirements of the applicable European and national directives.
	Separate the packaging elements and dispose of them in accordance with local regulations.
	Separate the product and packaging elements and dispose of them in accordance with local regulations.
	The products demonstrably meet the requirements of the Technical Regulations of the EAEU
	DangerThis device must not be used near water or in water (e.g. in a wash basin, or in the shower or bath) - risk of electric shock!
	Importer symbol
	Direct currentThe device is suitable for use with direct current only
	Protection class II deviceThe device is double-insulated and, therefore, meets protection class 2

3. INTENDEDUSE

The device is only intended for cutting and trimming human scalp hair. Do not use the device on animals or objects!

The device may only be used for the purpose for which it is designed and in the manner specified in the instructions for use. Any form of improper use can be dangerous. The manufacturer is not liable for damage resulting from improper or incorrect use.

4. WARNINGS AND SAFETY NOTES

WARNING

To avoid damage to health, we strongly advise against using the device in the following situations:

- Danger of suffocation by packaging material! Keep packaging material away from children.

- Inspect the device and accessories for visible damage before use. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

- Keep the mains adapter away from water.

- Risk of electric shock! Never submerge the device in water or other liquid!

- Risk of electric shock! If the device should fall into water despite following all safety precautions, immediately pull the mains plug from the socket! Do not reach into the water! Danger to life due to electric shock! Have the device checked by an authorised specialist workshop before using it again!

- If the device has been dropped or has suffered any other damage, it must no longer be used. Risk of electric shock and injury!

- Risk of electric shock! If there is visible damage to the device, accessories or mains adapter, do not use the device if you have any doubts and contact your re-

tailer or the specified Customer Services address.

• Risk of injury! Do not use the device if the stainless steel blade is damaged as it may have sharp edges.
• Do not use extension cables in the bathroom to ensure the mains adapter can be accessed quickly in an emergency.
• Only use the original comb attachments.

WARNING

To avoid damage to health, please note the following:

• Switch off the device before attaching or switching the comb attachment.
• Risk of fire! Ensure that no highly flammable liquids are located near the device.
• Remove all packaging material before using the device.
• Ensure that the mains cable does not pose a trip hazard.
• Only connect the device to a socket that has the correct voltage as indicated on the type plate.
• Only operate the device according to the specifications on the type plate.
• Only pull on the mains adapter to remove the mains cable from the socket.
• Never leave the device unattended while in use.
• Switch off the device after every use.
• Pull the mains adapter out of the socket after each completed charging process.

Notes on handling cutting oil

• Cutting oil may be harmful or fatal if swallowed. If swallowed, do not induce vomiting – seek medical attention immediately.
• If cutting oil comes into contact with the eyes or mouth, rinse the affected area with plenty of water. If irritation persists, seek medical attention immediately.

NOTICE

• Protect the device and its accessories from impacts, humidity, dirt, marked temperature fluctuations and direct sunlight.
• Only operate, charge or store the device at temperatures from -10^ C to 40^ C.

Notes on handling batteries

WARNING

• Do not disassemble, split or crush the batteries. Never subject the battery to mechanical impacts.
• If your skin or eyes come into contact with battery fluid, rinse the affected areas with water and seek medical assistance.
• Risk of explosion! Never throw batteries into a fire.
• Protect batteries from excessive warmth, heat and sunlight.
• Exposure of batteries to an environment with extremely high temperatures or an extremely low air pressure may result in explosion or leakage of flammable liquids and gases.

CAUTION

- Charge battery before use. Always use the correct charger. Avoid continuous charging.

NOTICE

- After prolonged storage, it may be necessary to charge and discharge the battery several times to achieve maximum performance.

5. DEVICE DESCRIPTION

The associated drawings are shown on page 3.

1 Stainless steel blade
2 6 comb attachments (3–25 mm)
3 4-level precision adjustment: 0.6 / 1.2 / 1.8 / 2.4 mm
4 ON/OFF control
5 LED display with battery status in %, charge indicator and travel lock indicator
6 Connection socket
7 Storage bag
8 USB charging cable
9 Cutting oil
10 Cleaning brush

6. INITIAL USE

You can operate the device with the battery as well as a mains adapter (not included in delivery). To charge the device, only use a mains adapter of protection class 2 (☐) which is approved for use with household appliances and with an output corresponding to the safety extra-low voltages of 5 V and max. 1 A.

6.1 Battery mode/charging the battery

You must fully charge the battery for 3 hours before the first use. The device will run for approx. 4.5 hours when fully charged. If the battery charge level is less than 20%, the LED display 5 will show "Lo" for "Low" and flash.

1. Connect the USB charging cable 8 to the connection socket 6 and a mains adapter (not included in delivery).
2. Insert the mains adapter into a suitable socket. The LED display 5 shows the current battery status in % and the charge indicator flashes.
3. As soon as the LED display 5 shows "100%" and the charging symbol is permanently illuminated, the battery is fully charged. The device is now ready for use.

6.2 Mains operation

! DANG

Risk of electric shock! Never use the device in the shower or in a damp environment when it is in mains operation mode!

1. Connect the USB charging cable 8 to the connection socket 6 and a mains adapter (not included in delivery).
2. Insert the mains adapter into a suitable socket. The device is now ready for use and the battery is charging.

6.3 Travel lock

The travel lock prevents the device from being switched on by accident (e.g. when being carried in a suitcase).

1. To activate the travel lock, press and hold the ON/OFF control 4 for 3 seconds. The travel lock symbol lights up. The travel lock symbol flashes during activation. As soon as the travel lock is activated, the travel lock symbol lights up continuously for a short time.
2. If the ON/OFF control 4 is briefly pressed when locked, the travel lock symbol will also light up.
3. To deactivate the travel lock, press and hold the ON/OFF control 4 for 3 seconds. The travel lock symbol flashes during deactivation. As soon as the travel lock is deactivated, the travel lock symbol goes out.

The device can be switched on by pressing the ON/OFF control 4 again.

When the device is connected to the power supply, the travel lock is automatically deactivated so that the device can be used in mains operation right away.

7. USAGE

1. Place the stainless steel blade 1 onto the device from above until it clicks into place. To remove the stainless steel blade 1 again, press it upwards with your thumb.

Line drawing of a hand holding a tool, with an arrow indicating the process (no text or symbols present)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

1. If necessary, select one of the six comb attachments 2 and place it on the stainless steel blade 1. Slide the comb attachment 2 as far as it will go along the stainless steel blade 1. We recommend that you

start with the comb attachment with the longest cutting length initially so you can then slowly work your way up to your desired length.

Simple line drawing of a hand holding a pointed object with an arrow indicating direction (no text or symbols)

1. Press the ON/OFF control 4 to switch on the device. The LED display 5 begins to light up.

2. Guide the device slowly through the hair. Ensure that the comb attachment sits as flat on the head as possible. Always only trim small areas. Cut the hair against the direction of growth. If the hair grows in different directions, use the device in multiple directions.

3. To switch off the device after use, press the ON/OFF control 4. The LED display 5 turns off.

8. CLEANING AND MAINTENANCE

8.1 Cleaning the device

WARNING

• Risk of electric shock! Always disconnect the device from the power source before cleaning it.
• Risk of fire! Do not clean the device with highly flammable liquids!
• Do not clean the device in the dishwasher!

• The device is not waterproof. The stainless steel blade 1 can be removed and rinsed under running water for hygienic cleaning.

• For thorough cleaning, remove the stainless steel blade 1 from the device by pulling it upwards.

• Leave the stainless steel blade 1 to dry completely before reattaching it to the device.

8.2 Oiling the stainless steel blade

To achieve consistently optimal cutting results, spread a little cutting oil on the stainless steel blade 1 on a regular basis.

9. ACCESSORIES AND REPLACEMENTPARTS

To purchase accessories and replacement parts, please visit www.beurer.com or contact the corresponding service address (according to the service address list) in your country. Accessories and replacement parts are also available from retailers.

10. DISPOSAL

For environmental reasons, do not dispose of the device in household waste at the end of its service life. Dispose of the device at a suitable local collection or recycling point in your country. Observe the local regulations for material disposal. Dispose of the device in ac-

cordance with EC Directive Waste Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local authorities responsible for waste disposal. You can obtain the location of collection points for old devices from the local or municipal authorities, local waste disposal companies or your retailer, for example.

Used, completely flat batteries must be disposed of via specially designated collection boxes, recycling points or electronics retailers. You are legally required to dispose of the batteries.

The codes below are printed on batteries con-

taining harmful substances: Pb = battery contains lead, Cd = battery contains cadmium, Hg = battery contains mercury.

11. TECHNICAL SPECIFICATIONS

Model MN5X
Weight Approx. 272 g
Device dimensions 18	5 x 4.5 x 5 cm
Device input 5.0 V	--- 1.0 A
Battery:CapacityNominal voltageType designation	2000 mAh3.7 VLithium-ion

12. GUARANTEE

More information on the guarantee and guarantee conditions can be found in the guarantee leaflet supplied.

FRANÇAIS

Simple line drawing of an open book with no text or symbols visible

Instructions relatives aux piles

AVERTISSEMENT

Line drawing of a hand holding a tool, with an arrow indicating direction (no text or symbols)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a mechanical joint or bracket with arrows indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Two-step illustration showing hand positioning of a tool or component, with no text or symbols present.

Simple line drawing of a hand holding a small object with an arrow indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand holding a tool, with an arrow indicating direction (no text or symbols)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a hand holding a small object with arrows indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand holding a piece of material, with an arrow indicating direction (no text or symbols)

Illustration of hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand holding a tool with an arrow indicating direction (no text or symbols)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a hand holding a small object with an arrow indicating downward motion (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand holding a tool with an arrow indicating rotation (no text or symbols)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a mechanical component with an arrow indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

4. WAARSCHUWINGEN EN VEILIGHEIDSRICHTLIJNEN

WAARSCHUWING

5. BESCHRIJVING VAN HET APPARAAT

Line drawing of a hand holding a tool, with an arrow indicating direction (no text or symbols)

Illustration of hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a hand holding a small object with arrows indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand holding a tool, with an arrow indicating the process (no text or symbols present)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

Diagram showing a hand holding a small object with an arrow indicating direction (no text or symbols present)

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand holding a tool, with an arrow indicating direction (no text or symbols)

Illustration of hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a hand holding a triangular object with an arrow indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Two-step illustration showing hand positioning of a tool or device, with arrows indicating movement direction (no text or symbols)

Simple line drawing of a hand holding a small object with an arrow indicating direction (no text or symbols)

Simple line drawing of an open book with no text or symbols visible

Line drawing of a hand gripping a piece of material, with an arrow indicating direction (no text or symbols)

Illustration of two hands holding a small object with an upward arrow, no text or symbols present

Simple line drawing of a hand holding a small object with arrows indicating direction (no text or symbols)

BEURER UK Ltd., Suite 16, Stonecross Place Yew Tree Way, WA32SH Golborne, United Kingdom