SnapShot Cloud Pro 4G - Camera Dörr - Free user manual and instructions

USER MANUAL SnapShot Cloud Pro 4G Dörr

ANY SIM CARD POSSIBLE

14.4 ROHS KONFORMITÄT

Video Settings	34
Video Size	34
Video Length	34
Flash Settings	35
PIR Motion Detector	35
Sensitivity	35
Timer	35
07.1 During initial setup of the camera	35
07.2 Standby Mode	35
Media	36
Favorites	36
Cameras	37
My Account	38
08 | FURTHER FUNCTIONS	39
08.1 Test Recordings	39
08.2 Deleting/Re-registering a camera	39
08.3 In the event of theft 39
09 | MOUNTING / DIRECTING	39
09.1 Mounting and directing the camera	39
09.2 Notes for mounting the camera	39
09.2.1 PIR Sensor	39-40
09.2.2 Light conditions	40
09.2.3 Weather protection	40
10 | OPTIONAL ACCESSORIES	40
10.1 Optional mounting accessories	40
10.2 Optional anti-theft devices	40
10.3 Alternative power supplies	40
10.4 SIM Hero multi-network card	41
11 | CLEANING AND STORAGE	41
12 | SCOPE OF DELIVERY	41
13 | TECHNICAL SPECIFICATIONS	42
14 | DISPOSAL, CE MARKING, SIMPLIFIED EU DECLARATION OF CONFORMITY	43
14.1 Disposal of battery/accumulator	43
14.2 WEEE Information	43
14.3 Disposal of the packaging	43
14.4 Conformity with RoHS	43
14.5 CE Mark	43
SIMPLIFIED EU DECLARATION OF CONFORMITY	43

GB

THANK YOU very much for choosing a quality product by DÖRR.

Please read the instruction manual and the safety hints carefully before using the device for the first time.

Keep the operating instructions together with the device for reference. If other people use this device, provide them with these instructions. If you sell the unit, this manual forms an integral part of the device and must be supplied with it.

DÖRR is not liable for damage caused by improper use or failure to observe the operating and safety instructions.

In the event of damage caused by improper handling or by external influence, the guarantee or warranty claim becomes void. Any manipulation, structural modification of the product or opening of the housing by the user or an unauthorised third party shall be considered improper handling.

01 | ⚠️ SAFETY HINTS

This device is not a toy! To prevent accidents and suffocation keep the device, the accessories and the packing materials away from children and pets.
- ▲ People with physical or cognitive disabilities should use the camera with supervision.
• ▲ People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.
- Your camera is fitted with a weatherproof housing according to protection class IP66 (dust and jet waterproof) so that the camera can be used outdoors. Nevertheless, protect the camera from extreme weather conditions and direct sunlight.
- Make sure to use only fresh Mignon AA LR6 1.5V Alkaline Manganese batteries or rechargeable NiMH or Lithium batteries of the same type and brand. Never combine Alkaline Manganese batteries with NiMH or Lithium batteries! When inserting the batteries please respect the correct polarity (+/-). Please remove batteries when device is not in use for a longer period.
- Only use SD/SDHC memory cards from 8GB to 32GB (SDXC 64GB to max. 128GB see chapter 06.3.1). Using a micro SD card in combination with an adapter may lead to malfunctions.
- Do not drop the camera onto a hard surface. Do not use the camera if it has been dropped. In this case a qualified electrician should inspect the camera before you use it again.
- Do not attempt to repair the devise by yourself. Risk of electrical shock! When service or repair is required, contact qualified service personnel.
- Do not open the camera housing (except the housing lid and the battery compartment) – the warranty will become void. The housing may only be opened by qualified DÖRR GmbH staff.
• LED bulbs can only be replaced by qualified DÖRR GmbH staff.
- Do not use the camera nearby devices that generate strong electromagnetic fields.
- Avoid touching the camera lens with your fingers.
- Protect the camera against extensive dirt. Never use aggressive cleansing agents or benzine to clean the camera. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the camera and the camera lens. Make sure to remove batteries before cleaning.
- Store the camera in a dust-free, dry and cool place when not in use.
- If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.

02 | ⚠️ SAFETY HINTS FOR BATTERIES/ACCUMULATORS

Only use high-quality batteries or accumulators of popular brands. When inserting the batteries or accumulators, please respect the correct polarity (+/-). Do not insert batteries of different types and always replace all batteries at the same time. Never combine Alkaline Manganese batteries with NiMH or Lithium batteries! Do not combine used batteries with fresh batteries. Please remove batteries/accumulators when device is not in use for a long period of time. Do not throw the batteries/accumulators into fire, do not short-circuit and do not disassemble them! Never charge non-rechargeable batteries - risk of explosion! Remove empty batteries immediately from the device to avoid the leaking of battery acid. Remove leaking batteries from the device immediately. Clean the contacts before inserting fresh batteries. Risk of battery acid burn! In case of contact with battery acid, rinse the affected area immediately with water and contact a doctor. Batteries can be dangerous to life if swallowed. Keep batteries/accumulators away from small children and pets. Do not dispose of batteries in household waste (see also chapter "Disposal of Batteries/Accumulators").

03 | PRIVACY POLICY

In every country, legal data protection rules apply. As these rules may vary per country, please contact the appropriate authorities to learn about the latest privacy policy in your country. In any case kindly note:

• Do not observe public areas such as sidewalks, roads, parking lots etc.
• Never observe your staff.
  • Respect the general right of privacy.
• Do not publish pictures showing individuals without having their permission. Do not publish pictures showing identifiable automobile license plates.
• Make aware of the observed areas with a sign and inform your neighbours and visitors if necessary.

04 | € MOBILE PHONE COSTS FOR PICTURE/VIDEO TRANSMISSION

Data exchange via mobile transmission always cause extra costs. These costs may vary depending on your provider and selected tariff and are not covered by the purchase of this camera. Please contact your mobile phone provider for tariff and costs.

05 | NOMENCLATURE

01 Antenna/antenna connection

02 PIR LED indicator

03 each 30 infrared LEDs

04 Light sensor

05 Camera lens

06 Motion detector (PIR sensor)

07 Tension lock

08 Eyelet for U-lock (lock optional)

09 Microphone

10 SIM card slot

11 SD card slot

12 QR Code (serial number)

13 TEST button

14 Button SD Format

15 Reset button

16 Slide control (ON/OFF)

17 LED status indicators

17a) Operating status

17b) Signal strength

17c) Battery status

17d) SD card status

17e) Network status

17f-g) DÖRR Cloud error indicators

18 Battery compartment

19 USB-C port

20 Connection external battery DC 12V

21 14 " thread mount

22 Eyelet for cable lock (lock optional)

23 Eyelets for mounting strap

24 Nano-SIM + Micro-SIM + Mini-SIM Adapter

25 USB-C data cable

26 Mounting strap

06 | COMMISSIONING

Remove the protective foil from the PIR sensor (06).

IMPORTANT

To avoid camera damages, make sure that camera is switched off (slide control 16 = OFF) for the following steps!

16 ON OFF

06.1 Mounting the antenna

Remove the yellow protective cap from the antenna connection (01) and screw on the supplied antenna.

06.2 Inserting the batteries

CAUTION

Make sure to use only fresh Mignon AA LR6 1.5V Alkaline Manganese batteries or rechargeable NiMH or Lithium batteries of the same type and brand. Never combine Alkaline Manganese batteries with NiMH or Lithium batteries! When inserting the batteries please respect the correct polarity (+/-). Please remove batteries when device is not in use for a longer period.

Open the camera releasing the lateral tension lock (07). Make sure that the slide control (16) is on position OFF. Insert 12 AA 1,5V batteries or rechargeable NiMH or Lithium batteries (not included) into the battery compartment (18). Respect correct polarity (+/-).

NOTICE

If you operate the camera with NiMH or Lithium batteries, please select NiMH or Lithium later in the APP/Web in the menu item „Battery type“ to ensure an accurate indication of the battery status.

For alternative power supplies, please read chapter 10.3.

06.3 Inserting a SD/SDHC/SDXC memory card

NOTICE

Only use SD/SDHC/SDXC memory cards from 8GB to max. 128GB. Using a micro SD card in combination with an adapter may lead to malfunctions. Make sure that the SD card is formatted and unlocked. To format the SDcard with the camera, please read chapter 06.3.2.

SD SDHC SDXC ✓ Adapter micro SD micro SD SD SDHC SDXC

Insert the SD/SDHC/SDXC memory card (not included) with the label facing upwards into the SD card slot (11) until it snaps into place.

06.3.1 IMPORTANT SDXC Memory Cards 64 GB & 128 GB

Due to their standard formatting, SDXC memory cards with 64 GB and 128 GB must be formatted with the camera before use. How to format the SDXC card with the camera, please read following chapter 06.3.2.

06.3.2 Format SD/SDHC/SDXC card with the camera

1. Insert the SD/SDHC/SDXC memory card (not included) with the label facing upwards into the SD card slot (11) until it snaps into place.

2. Set the slide control (16) to the ON position. For example, use a pen to press the SD Format button (14) and hold it down for approx. 10 seconds until the LED 17d) starts flashing yellow:

1. After 10 flashes and successful formatting, the LED 17d) lights up constantly green. When setting up for the first time, please switch the camera off again (slide control (16) to the OFF position).

06.4 Inserting a SIM card

In order to use the mobile transmission function, make sure to insert a SIM card (not included) into the SIM card slot (10). Please mind the symbol above the SIM card slot which shows how to insert the card correctly.

Nano-SIM, Micro-SIM cards and Mini-SIM cards can only be used with the adapters supplied (24).

IMPORTANT

• The PIN request has to be deactivated, you can do this directly in the shop where you bought the SIM card, or with help of a mobile phone.
• Make sure the SIM card is activated for the mobile data transmission and if necessary has sufficient credit.
• For the mobile data transmission, the camera needs the parameter data of the respective provider. For all supported SIM card providers, please refer to:

https://doerr.media/manuals/simCard_Provider.pdf

SIM card providers that are not on the list currently cannot be used.

06.5 Download the DöRR APP

To install the DÖRR APP, scan the corresponding QR code for Android or iOS inside the gift box with your smartphone or download the APP directly in the Play Store for Android or in the APP store for iOS.

iOS APP > ANDROID APP >

06.6 Register and scan the QR code

Picture 1 Register with your email address and a password and tap to:

No account? Register now!

You will receive a confirmation email from DÖRR to the registered email address. Follow the link in this email for successful registration. Log in with the data used for registration.

DÖRR www.doerr-outdoor.de E-Mail address Password Forgot password? Click here! No account? Register now! LOGIN

Picture 2 Press the camera icon

Picture 3 Press at Add camera +

Media (2) All No media available.

Cameras No camera available. Add your first camera.

Picture 4 The QR code scanner function will start. Use your Smartphone to scan the QR code (12) in the camera

housing. Alternatively, you can enter the serial number manually. You will find the serial number inside of camera housing or on the gift box.

(4) Place your device over the QR-Code Add manually

Switch the slide control (16) to position ON.

16 ON OFF

Picture 5 Please enter a name for the camera.

For registration of your camera we need further information. Please enter the serial number of your camera and the phone number of your SIM card. Please enter a name for your camera. Serial number of camera 860264XXXXXXXX Camera name Next

06.7 DÖRR SnapShot Cloud 4G/4G Pro website

You may also register and log in via our website with your PC/laptop:

https://www.doerr.cloud/

We recommend using Google Chrome Browser

NOTICE

The appearance/symbols in the app and on the website may vary. However, the settings and functions are identical and as described in the following chapters.

06.7 Switch on / Camera status check

After you have switched on the camera, the camera will now check all relevant functions. During this process, the operating status LED (17a) and all other LEDs flash green. As soon as the operating status LED (17a) lights up green continuously, the check is complete and your camera is ready for registration/use.

Unregistered camera:

Camera remains in registration mode for 5 minutes. After this, the camera switches to standby mode (see chapter 07.2) and the LEDs and PIR LED indicator (02) go out.

Already registered camera:

After approx. 1 minute, the camera switches to the defined working mode (LEDs and PIR LED indicator (02) go out).

You can return to the status view (LEDs light up) at any time by pressing the TEST button (13).

NOTICE

When setting up your camera for the first time, the LED status indicators (17f) and (17g) flash green until the camera has been successfully registered. Registration is complete as soon as you have clicked on Save settings in the app/web interface (see page 35).

Should a critical error occur during the check, the operating status LED (17a) will light up red constantly. For troubleshooting, as well as for information on the other LED status indicators (17b - 17e), please read the table below (chapter 06.7.1).

IMPORTANT

If the LED status indicators 📞(17f) and/or 📞(17g) light up or flash red, please contact our service department at [phone] or by email at [e-mail].

LED	LED status	Meaning	Troubleshooting
(02)Camerafront	flashes red	Camera is in setup mode.PIR sensor is not active.	Wait until the camera automatically switches to working mode. Alternatively, press and hold the TEST button (13) for 5 seconds. If the ca-mera is in working mode, the LED goes out.
ON(17a)	flashes slowly green Camera status is being checked.		✓
	lights constantly green Camera is ready for use.		✓
	lights constantly red	Camera is not ready for use.	Check which other LED is red or flashing.
	flashes slowly yellow	Debug mode active.	Please contact DÖRR Service.
(17b)	flashes slowly green	Connection establishment to the mobile network.	✓
	lights constantly green	Connection to the mobile network esta-blished.	✓
	lights constantly yellow The signal strength is mediocre.		✓
	flashes slowly yellow The signal strength is weak.		✓
	lights constantly red Connection to the mobile network failed.		Make sure that:·the SIM card has credit.·the SIM card is inserted correctly.·the camera supports the network provider used (see chapter 6.4).
	flashes slowly yellow No SIM card inserted. Insert a SIM card.
	flashes red and green alternately	Critical error!	Please contact DÖRR Service.
(17c)	flashes slowly green	Camera connected to power supply.	✓
	lights constantly green Battery capacity more than 60%.		✓
	lights constantly yellow Battery capacity between 30-60%.		✓
	lights constantly red	Battery capacity below 30%.	Insert fresh batteries as soon as possible.
	flashes quickly red	Battery capacity insufficient for opera-tion.	Insert fresh batteries.
(17d)	lights constantly green	SD card inserted and ready for operation.	✓
	lights constantly yellow	SD card inserted - card is full!	Delete files from the memory card and refor-mat the card (see chapter 6.3.2)
	lights constantly red	No SD card inserted or SD card locked or formatted incorrectly.	Please refer to chapter 6.3.
	flashes quickly green Data is being written to SD card.		✓
	flashes quickly red for 5 sec., then returns to original status	Data cannot be written to SD card.	Please check the other SD card status.
	flashes slowly yellow Memory card is being formatted.		✓
(17e)	flashes slowly green	Network service is being initialized.	✓
	lights constantly green Network quality is at least 4G.		✓
	lights constantly yellow	Network quality is 2G to 3G.	✓
	lights constantly red No network service.		Make sure that:·the SIM card has credit.·the camera supports the network provider used (see chapter 6.4).

LED	LED status	Meaning	Troubleshooting
(17f)	● lights constantly green Camera connected to DÖRR Cloud.		✓
	● lights constantly red DÖRR Cloud service not available. Please contact DÖRR Service.
	● flashes slowly green Ready for registration process.		✓
	● flashes slowly red DÖRR Cloud service not available. Please contact DÖRR Service.
	● flashes quickly green Communication with DÖRR Cloud.		✓
	● flashes red quickly for 5 sec., then returns to original status	Media upload failed. Please contact DÖRR Service.
(17g)	● flashes slowly green Ready for registration process.		✓
	● lights constantly green Camera connected to DÖRR Cloud.		✓
	● lights constantly red DÖRR Cloud service not available. Please contact DÖRR Service.
(All)	● All LEDs flash green 2x and then go out Camera reset is being performed.		Camera must be reconnected to DÖRR Cloud. See instructions in the APP.
	● All LEDs flash quickly green Firmware update is being performed.		✓
	● All LEDs flash quickly red	Firmware update failed.	Check firmware, SD card inserted correctly, SD card formatted correctly?

DÖRR Service Department

[phone]

[e-mail]

Default settings are marked with (*)

Camera Settings
Note: Changes made in settings will be executed by the camera after max. 24 hours.
Camera
Camera Mode
Photo (*)	The camera takes photos according to your settings for image size and multi shot.
Video	The camera records videos according to your settings for video size and video length.
Photo and Video	The camera first takes a picture(s) and then a video according to your settings for picture size, multi shot, video size and video length.
Sending Mode
Photo (*) Camera is sending photos.
Video Camera is sending videos.
Photo and Video Camera is sending image(s) and 1 video.
Preview In photo, photo and video modes, the quality of the picture is reduced.
Security Mode
Disabled (*)	This mode is aimed at users with special security requirements - all data transmission (image and video) is encrypted. Please note that using this mode results in a considerable increase in energy consumption. We recommend its use for professional users in the security sector and in combination with an external power source (see chapter 10.3)
Photo
Video
Photo and Video
Battery Type
Alkaline (*)	To ensure an accurate indication of the battery status, please select whether you have inserted alkaline, Ni-MH or lithium batteries in the camera. There are different battery types for lithium - if in doubt, select „Alkaline“.
Ni-MH
Lithium
Remote Control
Realtime (*)	Settings are applied immediately. IMPORTANT High battery consumption!
Every 30 minutes
Every hour	Settings are applied at the latest in the selected time interval. If photos or videos are transmitted from the camera before the time interval expires, the new settings will be applied at this transmission time.
Every 2 hours
Every 3 hours
Every 4 hours	NOTICEIf you have inadvertently made incorrect settings and the camera is not in real-time mode, you can correct the settings immediately by first making the desired settings in the app/web interface and then triggering an image manually via the motion detector, e.g. by waving your hand in front of the PIR sensor (06).
Every 6 hours
Every 12 hours
Every 24 hours
Enable GPS (*)	GPS is represented in radians on the timestamp (e.g. N48°18'44" E010°02'02")
SD card overwrite	If the SD card is full, the camera overwrites the oldest recordings recommended.
KameranameSnapShot Cloud 4G PRO	If the SD card is full, the camera stops recording until the card is changed or formatted.The camera name assigned can be changed here.
Time ZoneEurope/Berlin	Select the time zone of your region.
Photo SettingsImage size
24 MP (*)	Select the desired image resolution.
16 MP	24 MP (5664x4248) / 16 MP (4608x3456) / 12 MP (4032x3024) / 8MP (3264x2448) / 5 MP (2560x1920)
12 MP
8 MP
5 MP
Multishot
1 pic (*)	Select the number of images to be taken upon movement or triggering.
2 pics
3 pics
4 pics
5 pics
Delay
Take X pictures within one second	If you have selected 2 to 5 pictures under „Multishot“, you can specify here whether the continuous pictures should be taken consecutively within 1 second or whether there should be a pause of 1 second or 2 seconds between the continuous pictures.
Interval between multishot pictures 1 sec. (*)
Interval between multishot pictures 2 sec.
Time Lapse(*)	The camera triggers according to the specific time set, independently from the PIR detector.Example with setting 01:00:00:The camera triggers every hour independently from motion recognition.Possible time interval: min. 05 seconds to max. 24 hours (Input 23:59:59)
Delay(*)	Set a pause for the PIR Sensor. This setting prevents the camera from taking too many images/videos.Example with setting 5 minutes:After triggering, the camera sets the PIR inactive for 5 minutes. After the time set the PIR sensor will be active again.Possible delay: min. 05 seconds to max. 24 hours (Input 23:59:59)
Flash SettingsMaximum number of images per dayOFF (*) 10 99	Set the desired number of images per day.Once the set number is reached, the camera stops the function.

Video Settings
Video Size
FHD-1080P (*)	Select the desired video format.
HD-720P	Full HD 1080P (1920x1080) / HD 720P (1280x720) / WVGA (848x480)
WVGA
Video Length	Select the desired video length.
10 (*)5 59	min. 5 sec. - max. 59 sec.
Flash Settings
Flash
Max. Flash (*)	Select the desired flash range.Maximum approx. 20 meters / minimum approx. 8 meters
Min. Flash

PIR Motion Detector
Enable PIR	The Passive Infrared Sensor (PIR) triggers upon motion and temperature changes recognised within the detection range.
Sensitivity	Adjust the sensitivity of the motion detector.Level 1-5: Select when camera triggers too often upon environment influences, e.g. falling branches or strong sunlight.Level 6-9: The camera recognises even smallest motion and temperature changes.NOTICE If OFF is selected, the camera will not take any recordings! Switch the time lapse ON to get recordings!

Timer
Timer 1(*)	Timer 1: Set a fixed working time frame in which the camera is active. Outside of this time, no recordings are made or movements are registered.
	Example with setting 2:00 – 5:00:Camera is only active between 2:00 and 5:00 a.m.
	If you select the OFF function in this menu item, the camera works 24 hours a day. You can set up to 2 working times per day.
Timer 2(*)	Timer 2: Set a second fixed working time frame in which the camera is active (see timer 1).If you select the OFF function in this menu item, the camera works 24 hours a day or according to your settings for timer 1.
Save Settings	Tap Save Settings to confirm your adjustments.

07.1 ▶ NOTICE > during initial setup of the camera

After you have tapped on Save Settings, your registration is completed. After successful registration, the LED status indicators ©(17f) and (17g) stop flashing and light up green constantly. The camera will reboot within a few seconds. As soon as all LEDs light up green / yellow constantly, your camera is in working mode after approx. 60-70 seconds.

07.2 ▶ NOTICE > Standby Mode

If you do not complete the camera registration, the camera switches to standby mode after 5 minutes. To continue registration, either press the TEST button (13) or switch the camera off and on again using the slide control (16).

Please refer to chapter 06.8 to complete the registration.

Media

Here you will find an overview of the pictures and videos you have taken.

Click on the desired image or video for a larger view of the image or to play a video.

Hd_202330109900000XXX

Delete

Save

Here you can rename your picture/video or delete it individually.

Mark image or video as favorite.

Save the picture or video as a file in the smartphone gallery or on the hard disk of your PC/laptop (original quality).

Mark, delete and share individual, multiple or all images and videos.

Here you can filter by time period, media type, camera and user.

Favorites

Here you will find an overview of your pictures and videos marked as favorites.

Mark, delete and share individual, multiple or all favorites.

Here you can filter your favorites by time period, media type, camera and user.

Cameras

Here you will find an overview of all your registered cameras. For information and settings, tap on the relevant camera.

Camera

SnapShot 4G Pro 86026XXXXXXXX

This function is only available if you have selected „Real time“ under „Remote control“ in the camera settings.

Tap the camera icon to request a real-time image.

Tap on the video camera icon to request a real-time video (subscription required).

Tap on the symbol to open the following options:

Update Firmware

Only clickable if there is a new firmware available for your camera. Please note: Battery capacity must be more than 65%.

Format SD card

Turn off camera

The camera is switched off by command. The camera reports every 24 hours to check its status and switch back to working mode if necessary.

Report as stolen

(please read chapter 08.3)

Delete camera

(please read chapter 08.2)

Information

Firmware DSR1DRXX Displays the installed firmware version.

Battery 100% Displays the battery status.

Signal quality 4G Mobile network

Signal strength

Signal strength

Synchronized

successfully synchronized.

Settings

Camera settings

This takes you to the camera settings (see chapter 07).

Sort number 1

▼ Sort your registered cameras.

Push

√ Allow push notifications.

Share

Share camera pictures

Share images of the selected camera with friends and colleagues within the DÖRR APP (registration is necessary). Tap + and enter the email of your friend. Tap Invite Your friend receives an email invitation to register for our service. After successful registering, your friend is able to see the images of the shared camera. To end sharing the images, tap the email address and confirm Delete

SMTP Forwarding

Option to use manually defined SMTP servers for data transfer. Please note that we cannot guarantee flawless functionality with third-party services such as Revierwelt, Revierspion, Picture Transfer, etc., as we have no control over their infrastructure.

SMTP servers that work exclusively with port no. 25 are not supported.

My Account

Here you can view and book your subscriptions.

NOTICE

Subscriptions can only be taken out in the respective iOS and Android app. Cancellations can only be made in the respective Appstore or Playstore.

In the web login under My account you can only see an overview of the currently active subscriptions.

User

[e-mail]	Your e-mail address.
New password	If necessary, assign a new password.
Confirm password	Confirm new password.
Registered on01.01.20203	Date of your registration.

Save

	Webshop	Visit ourwebshopand find out more about our wide range ofhunting and outdoor products!
	Newsletter	Sign up for ournewsletterand benefit from a variety of attractive offers!
	Legal notice	About us & Contact
	Privacy policy	Privacy policy
	Logout

08 | FURTHER FUNCTIONS

08.1 Test Recordings

Option 1: Request a real-time image as described on page 37 in the "Camera" section.

Option 2: To trigger a test recording manually on the camera, press the TEST button (13) once when the status display is active and the camera is ready for use (see chapter 06.8) to obtain media in the defined setting.

While the data is being written to the SD card, the SD card LED (17d) flashes green. While the test recording is being loaded into the DÖRR Cloud, the DÖRR Cloud LED (17f) flashes green.

To view your test recording, go to „Media“ in the DÖRR APP and tap on the corresponding camera.

08.2 Deleting/Re-registering a camera

In case you want to sell your camera, please follow these steps:

1. Delete the camera in the APP/web interface:

Cameras > tap on the camera to be deleted >

Camera

Tap on :

Delete camera

2. Reset camera to factory settings

To do this, press the RESET button (15) on the camera, e.g. with a pen, for approx. 10 seconds until all LEDs briefly light up green twice.

You or the new owner can now register the camera again in the DÖRR APP.

08.3 In the event of theft

If your camera is stolen, do NOT delete it from the APP, as this is the only way to ensure that the thief cannot register the camera. Contact our service via the „Report as stolen“ function and enter your contact details there.

Cameras > tap on the stolen camera >

Camera

Tap on :

Report as stolen

09 | MOUNTING / DIRECTING

09.1 Mounting and directing the camera

Pull the supplied mounting strap (26) through the eyelet (23) on the backside of the camera. Mount the camera to a tree, pole or any other suitable object. Do not fix the belt finally at this stage.

We recommend placing the camera at a height of 0.75 m to 1.00 m. The optimal distance to the subject is between 3 and 10 m. Larger distances are possible as well, but then the reliability of the motion sensor is no longer given. The camera lens (05) should now point to where the object is expected to show-up.

To verify your camera is hung up in a correct angle, we recommend taking a view test recorings (see chapter 08.1). The camera should be directed in a way that the object will appear in the centre of the picture. You may have to re-adjust the camera and take another test shot.

Once the camera position is correct, the mounting belt (26) can be tightened to hold the camera firmly.

NOTICE

Please also note chapter 10 with our extensive range of accessories for installation and anti-theft protection.

09.2 Notes for mounting the camera

09.2.1 PIR sensor

The PIR sensor triggers only under specific circumstances within a certain range. The capturing of objects strongly depends on temperature, vegetal cover, reflecting surfaces etc. Under perfect conditions the recognition range can be up to 20 m. Usually, you may expect a range of 15 m. It may take a few attempts to find a good

position for the camera. During photo test, be aware that animals are usually remarkably smaller than human beings. Animals might be below the PIR sensor detection range and not be captured.

09.2.2 Light conditions

Avoid direct backlight when mounting the camera. The lens should not point directly into the sun and camera should not be placed in shadow.

09.2.3 Weather protection

Although the camera is weatherproof and well-suited for outdoor use (dust and jet water protected according to IP66 protection class) we recommend mounting the camera in a secured place not facing the weather exposed side. Prevent the camera from driving rain and constant exposure to sunlight. After a long period of humidity caused by rain or fog, the camera should be placed in a dry area for a few days.

10 | OPTIONAL ACCESSORIES

10.1 Optional mounting accessories

Our optional accessories such as the patented DÖRR holding fixture in combination with the DÖRR universal adapter are designed for fast and easy mounting of the camera at a tree, wall or other objects. The camera clicks into the holding fixture and is firmly held in place. The camera can be removed easily for a quick change of place of action. The ball head ensure a flexible direction of the camera. The fixture is rotatable by 3100° and swivels up to 30° in all directions:

DÖRR Holding Fixture Multi for SnapShot

For quick mounting of your game and surveillance camera to a tree:

DÖRR tree screw 1/4' for surveillance cameras

10.2 Optional anti-theft devices

Pull a padlock (available as accessory) through the eyelet (08) to lock the camera housing:

DÖRR Combination Lock 3-digits small

Use our DÖRR cable lock (available as accessory) and pull it through the eyelet for cable lock (22) on the backside of the camera to secure it against theft:

DÖRR Universal Cable Lock 1,80 m

suitable for this:

DÖRR Combination Lock 3-digits medium

For a very high level of security, lock the camera in our weatherproof and rust-free DÖRR metal housing „Made in Germany“, which optimally protects your camera against theft, vandalism and extreme weather conditions:

DÖRR Metal Housing for SnapShot Cloud 4G/Pro 4G/4G Pro RC

10.3 Alternative power supplies

DÖRR solar panel with integrated 15,000 mAh battery - self-sufficient power supply for ultra-long runtimes. Ideal in combination with DÖRR 18650 lithium-ion batteries, which are charged via the solar panel:

DÖRR Solar Panel 15000mAh 6V-9V-12V

DÖRR lithium-ion battery 18650 3.7V 3000mAh 4-pack

suitable for this:

DÖRR USB charger for li-ion batteries 18650 4 charging slots

Alternatively, the camera can be operated with an external 12V battery in conjunction with our DÖRR battery cable. All optionally available in our DÖRR webshop:

Lead-acid battery 12V/12Ah

suitable for this:

DÖRR battery cable 2m with flat plug

For indoor use or for charging when using the camera with rechargeable batteries:

DÖRR power supply 12V, 2A

Both the solar panel, the AC adapter and the external battery need to be plugged-in to the cameras DC 12V port (20). Any inserted batteries do not need to be removed when using external power supplies. The

camera automatically reverts to the inserted batteries as soon as the external power supply is disconnected.

10.4 Freeway multi-network prepaid SIM card

The multi-network prepaid SIM card from FREEEWAY works throughout Europe and connects your DÖRR SnapShot Cloud wildlife cameras quickly and easily to the mobile phone network. The best available mobile network is always used for this. The exclusive DÖRR tariffs can only be used in combination with a DÖRR Cloud camera.

Multi-network prepaid SIM card for DÖRR wildlife cameras

Visit our web shop www.doerr.shop

for a great variety of surveillance camera accessories and get more information on our wide assortment of hunting and outdoor items!

11 | CLEANING AND STORAGE

Do not clean the camera with benzine or harsh cleaning agents. We recommend using a lint-free, slightly damp microfibre cloth to clean the external components of the camera. ⚠ Never immerse the camera in water to clean it. ⚠ Remove the batteries before cleaning! When not in use, store the camera in a dust-free, dry, cool place. ⚠ The camera is not a toy - keep it out of the reach of children. Keep the camera away from pets.

12 | SCOPE OF DELIVERY

DÖRR USB-C sens dim slogner sens dim slogner QUICK START i

Recording capability Photo / Video with audio / Photo+Video with audio
Mobile picture transmission Yes
Mobile video transmission Yes
Combined picture and video recording Yes
Number of LEDs / LED Type 60 Invisible Infrared LEDs, 940nm
Flash range max. approx. 20 m
Detection range motion sensor approx. 20m / 100°
Picture angle approx. 100°
Trigger speed PIR sensor approx. 0,4 - 0,7 sec.
Image sensor 5MP Colour CMOS Sensor
Aspect Ratio 4:3
Picture resolution stored 24 MP*/16 MP*/12 MP*/8 MP*/5 MP (*interpolated)
Picture resolution sent	Thumbnail (1920x1440)/24 MP*/16 MP*/12 MP*/8 MP*/5 MP (*interpolated)
Digital picture format	JPEG
Video resolution stored + sent	Full HD 1080P / HD 720P / WVGA
Video length	5 - 59 sec.
Digital video format	MP4
Lens	F=2.0/100°
Multiple shots (pictures per release)	1 - 5 photos
Delay PIR Sensor	5 sec. - 24 hours
Sensitivity PIR sensor	1 - 9 steps
Time frames per day	2
Time lapse function	Yes
Time stamp on image	Longitude and latitude, resolution, battery status, temperature (°F/°C), moon phase, date, time
Minimum requirement Android/iOS version	Android 10 / iOS 16.4
APP Languages	DE, GB, FR, ES, IT, DK, NL, SE
Memory card	SD/SDHC 8GB up to max. 32GB; SDXC 64GB up to max. 128GB see instruction manual (memory card not included)
SIM card format	Standard SIM (Nano-SIM+Micro-SIM+Mini-SIM with adapter, SIM card not included)
Mobile radio module	LTE Cat1; EU; 4G/3G/2G
Frequency band/Transmitting power max. approx.	LTE B1, B3, B7, B8, B20, B28: 23dBm ± 2dB [199,53 mW]WCDMA 1 / WCDMA 8: 24dBm +1/-3dB [251,19 mW]GSM/EDGE 3: 26dBm ± 3dB [398,11 mW]GSM/EDGE 8: 27dBm ± 3dB [501,19 mW]
GPS	Yes
Power supply	12x Mignon AA LR6 1.5V alkaline batteries or equivalent NiMH or Lithium batteries (not included)
Operating voltage	DC 12V / 2A
Power consumption approx.	while operation ∅ 107mA-300mA by day, 115mA-777mA by night / standby 0.084mA
Runtime in standby mode approx.	8 month with 12x AA batteries
Socket for external battery	Yes
USB port	USB-C
Thread mount 1/4*	Yes
Ingress protection code	IP66
Operating temperature approx.	-20°C to +55°C
Storage temperature approx.	-25°C to +60°C
Relative humidity approx.	5% - 90%
Colour	camouflage/green
Dimensions approx.	11,5 x 14,5 x 7,5 cm, height with antenna: 37 cm
Weight without batteries approx.	394 g

DÖRR GmbH reserves the right to make technical changes without notice.

14 | DISPOSAL, CE MARKING, SIMPLIFIED EU DECLARATION OF CONFORMITY

14.1 DISPOSAL OF BATTERY/ACCUMULATOR

Batteries and rechargeable batteries are marked with the symbol of a crossed-out waste bin. This symbol indicates that empty batteries or rechargeable batteries that can no longer be recharged must not be disposed of in household waste. Old batteries may contain harmful substances that can cause damage to health and the environment. As the end user, you are legally obliged to return used batteries (under German battery law, Section 11 Act Revising the Law of Waste-Related Product Responsibility for Batteries and Accumulators). You can return batteries free of charge after use at the point of sale or in your immediate vicinity (e.g. at municipal collection points or in shops). You can also return batteries to the seller by post.

14.2 WEEE INFORMATION

The WEEE (Waste Electrical and Electronic Equipment) Directive, which came into force as European law on 13 February 2003, led to comprehensive changes in the disposal of discarded electrical equipment. The primary purpose of this directive is to prevent e-waste while promoting reuse, recycling and other forms of reprocessing in order to reduce waste. The WEEE logo (dustbin) shown on the product and on the packaging indicates that the product must not be disposed of in normal household waste. You are responsible for delivering all discarded electrical and electronic equipment to appropriate collection points. Sorting waste for separate collection and sensible recycling of packaging waste helps to use natural resources more sparingly. Furthermore, e-waste recycling is a contribution to preserving our environment and thus also people's health. Further information on the disposal of electrical and electronic equipment, recycling and collection points can be obtained from local authorities, waste disposal companies, specialist retailers and the manufacturer of the device.

14.3 DISPOSAL OF THE PACKAGING

Dispose of the packaging by type. Give cardboard to the waste paper, foils to the collection of recyclables.

14.4 CONFORMITY WITH ROHS

This product complies with the European RoHS Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment and variations thereof.

14.5 CE MARK

The imprinted CE mark complies with the applicable EU standards and indicates that the device meets the requirements of all EU directives

applicable to this product.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, DÖRR GmbH declares that the radio equipment type [204449] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.doerr.shop/204449

Indice Page

10 | ACCESSOIRES OPTIONNELS

14 | ÉLIMINATION, MARQUAGE CE, DÉCLARATION UE DE CONFORMITÉ SIMPLIFIÉE

14.1 ÉLIMINATION DES PILES/DE LA BATTERIE

√ 14.4 CONFORMITÉ ROHS

https://www.doerr.shop/204449

Índice Página

√ 14.4 CONFORMIDAD CON ROHS

https://www.doerr.shop/204449

06 | PRIMA ACCENSIONE

14.4 CONFORMITÀ ROHS

06.7 DÖRR SnapShot Cloud 4G/4G Pro website

02 | ⚠️ BATTERIJ/ACCU WAARSCHUWINGEN

06.7 DÖRR SnapShot Cloud 4G/4G Pro website

10 | OPTIONELE ACCESSOIRES

10.1 Optionele montagetoebehoren

14.3 VERPAKKING AFVOEREN

https://www.doerr.shop/204449

Översikt Sida

DÖRR USB-C USB card USB card QUICK START i

12 | A CSOMAG TARTALMA

DÖRR USB-C sens dim sähgner sens dim sähgner QUICK START i

√ 14.4 ROHS MEGFELELŐSÉG

https://www.doerr.shop/204449

DÖRR

Bills QR-Code scanners und in Bedienwages- anleitung nachlehen. Please scan the QR Code to check the manual. Bills Kundenservice kontaktieren. Please contact our customer service +49 711.870 37 69 hello.doers.gmbH Test SD Format Reset ON OFF

DÖRR GmbH

Messerschmittstr. 1

D-89231 Neu-Ulm

Fon: [phone]

[e-mail]

https://doerr.shop

SnapShot Cloud Pro 4G WA

Artikel Nr. 204449

Made in China