G40LM41K2 - Lawn mower GREENWORKS - Free user manual and instructions
Find the device manual for free G40LM41K2 GREENWORKS in PDF.
| Brand | Greenworks |
| Model | G40LM41K2 |
| Product Type | Cordless Lawn Mower |
| Cutting Width | 41 cm |
| Cutting Height | 25 – 80 mm (centralized adjustable) |
| Rotation Speed | 3500 rpm |
| Sound Power Level (LpA) | 70.3 dB(A) |
| Guaranteed Sound Power Level (LWA) | 92 dB(A) |
| Vibration Level | ≤ 2.5 m/s² |
| Grass Catcher Capacity | 50 L |
| Net Weight | 18 kg |
| Power Supply | Lithium-ion Battery (model 29717/29727) |
| Compatible Charger | Models 2910907 / 2904607 / 2904707 |
| Replacement Blade | Ref. 2920207 |
| Mulching Accessory | Included (replaces the grass catcher) |
| Starting System | Start button + power lever |
| Height Adjustment | Centralized, by push button |
| Slope Use | Up to 15° (mow across the slope) |
| Warranty | 2 years (parts and labor) |
| Maintenance | Clean after use, replace blade if worn |
Frequently Asked Questions - G40LM41K2 GREENWORKS
User questions about G40LM41K2 GREENWORKS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lawn mower in PDF format for free! Find your manual G40LM41K2 - GREENWORKS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G40LM41K2 by GREENWORKS.
USER MANUAL G40LM41K2 GREENWORKS
English (Original Instructions)
SPECIFICATIONS
| Lawn mower 2504707 | |
| Width of cut 41 cm | |
| Height of cut 25 mm - 80 mm | |
| No-load speed 3500 RPM | |
| Sound pressure level LpA : | 70.3 dB(A) |
| K=1.97 dB | |
| Maximum vibration | ≤ 2.5 m/s ^2 |
| Grassbox capacity 50 L | |
| Net weight | 40 lbs (18 kg) |
| Spare Blade | 2920207 |
| Battery | Lithium-ion |
| Model number | 29717 / 29727 |
| Battery charger | |
| Model number | 2910907 / 2904607 / 2904707 |
DESCRIPTION
- Power lever
- Start button
- Motor control cable
- Quick release fasteners
- Lower handle
- Battery door
- Front wheel
- Rear wheel
- Height adjustment button
- Quick release fasteners
- Grassbox
- Rear discharge door
- Upper handle
- Mulching plug
- Knob
- Grassbox handle
- Slots
- Door rod
- Blade
- Blade insulator
-
Spacer
-
Blade nut
- Blade holder
- Motor shaft
- Battery (not included)
- Wrench (not included)
- Block of wood (not included)
WARNING
Use of any other battery packs may result in a risk of fire, electric shock, or injury to persons.
KNOW YOUR LAWN MOWER
See figure 1.
The safe use of the product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
GRASSBOX
The grassbox collects grass clippings and prevents them from being discharged across your lawn as you mow.
HEIGHT ADJUSTMENT BUTTON
The height adjustment button provides cutting height adjustments.
MOTOR CONTROL CABLE
The motor control cable, located on the upper handle of the mower, engages and disengages the motor and blade.
MULCHING PLUG
Your mower is equipped with a mulching plug that covers the rear discharge opening, which allows the mower blade to cut and recut for finer clippings.
ASSEMBLY
UNPACKING
This product requires assembly.
■ Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
English (Original Instructions)
WARNING
Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
■ Inspect the product carefully to make sure no breakage or damage occurred during shipping.
■ Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
■ If any parts are damaged or missing, please call your Greenworks tools service centre for assistance.
PACKING LIST
■ Lawn mower
■ Battery key
Grassbox
■ Mulching plug
■ Operator's manual
WARNING
If any parts are damaged or missing do not operate this product until the parts are replaced. Using a product with damaged or missing parts could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING
Do not insert isolator key until assembly is complete and you are ready to mow. Failure to comply could result in accidental starting and possible serious personal injury.
WARNING
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.
WARNING
Never operate the mower without the proper safety devices in place and working. Never operate the mower with damaged safety devices. Operation of this product with damaged or missing parts could result in serious personal injury.
UNFOLDING AND ADJUSTING LOWER HANDLE
See figure 2.
■ Pull up and back on the upper handle to raise the handle into operating position. Make certain the handles snap into place securely.
■ Tighten the lower handle with the quick release fasteners on both sides.
NOTE: Ensure both sides are set at the same position for proper assembly.
INSTALLING THE UPPER HANDLE
See figure 3.
■ Align the mounting holes on the upper handle and the lower handle. Insert the quick release fasteners and use the knobs to tighten them. Repeat the operation on the other side.
INSTALLING THE GRASSBOX
See figure 4.
■ Lift the rear discharge door.
■ Lift the grass catcher by its handle and place under the rear discharge door so that the hooks on the grass catcher are seated on the slots.
■ Release the rear discharge door. When installed correctly, the hooks on the grass catcher will extend through the openings on the rear discharge door.
INSTALLING THE MULCHING PLUG
See figure 5.
■ Lift and hold up the rear discharge door.
■ Grasp the mulching plug by its handle and insert it at a slight angle, as shown.
■ Push the mulching plug securely into place.
■ Lower the rear discharge door.
SETTING BLADE HEIGHT
See figure 6.
When shipped, the wheels on the mower are set to a low-cutting position. Before using the mower for the first time, adjust the cutting position to the height best suited for your lawn. The average lawn should be between 38 mm and 51 mm during cool months and between 51 mm and 70 mm
English (Original Instructions)
during hot months.
To adjust the blade height
■ To raise the blade height, press the height adjustment button and lift the mower.
■ To lower the blade height, press the height adjustment button and lower the mower.
OPERATION
WARNING
Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING
Always wear eye protection. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
WARNING
Always inspect mower for missing or damaged parts and blade for damage, uneven, or excessive wear prior to use. Using a product with damaged or missing parts could result in serious personal injury.
■ Do not tilt the lawn mower when starting the engine or switching on the motor, unless the lawn mower has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator.
■ Do not start the engine when standing in front of the discharge chute.
■ Do not put hands or feet near or under rotating parts. Always keep clear of the discharge opening.
For complete charging instructions, refer to the operator's manual for the battery packs and chargers listed in the specifications section.
TO INSTALL BATTERY PACK
See figure 7.
■ Lift and hold up the battery door.
■ Align the battery with the mower's battery port.
■ Make sure the battery release button snaps in place and that battery is fully seated and secure in the mower before beginning operation.
■ Insert the battery key.
■ If the machine is not going to be used immediately, do not insert the battery key.
■ Close the door.
TO REMOVE BATTERY PACK
See figure 7.
■ Release the power lever to stop the product.
■ Open the battery door.
■ Remove the battery key.
■ Press the battery release button on the mower. This will cause the battery to raise out of the tool slightly.
■ Remove battery pack from the product.
STARTING/STOPPING THE MOWER
See figure 8.
■ Open the battery door and insert the battery.
■ Press and hold the start button.
■ Pull the power lever upward to the handle to start the mower.
■ To stop the mower, release the power lever.
NOTE: A high-pitched noise and sparking may occur as the electric motor decelerates. This is normal.
MOWING TIPS
■ Make sure the lawn is clear of stones, sticks, wires, and other objects that could damage the lawn mower blades or motor. Do not mow over property stakes or other metal posts. Such objects could be accidentally thrown by the mower in any direction and cause serious personal injury to the operator and others.
■ For a healthy lawn, always cut off one-third or less of the total length of the grass.
■ Do not cut wet grass, it will stick to the underside of the deck and prevent proper bagging or mulching of grass clippings.
■ New or thick grass may require a narrower cut or a higher cutting height.
■ Clean the underside of the mower deck after each use to remove grass clippings, leaves, dirt, and any other accumulated debris.
■ When cutting long grass, reduce walking speed to allow for more effective cutting and a proper discharge
English (Original Instructions)
of the clippings.
NOTE: Always stop mower, allow blades to completely stop, and remove the isolator key before cleaning underneath the mower.
SLOPE OPERATION
WARNING
Slopes are a major factor related to slip and fall accidents that can result in severe injury. Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it. For your safety, do not attempt to mow slopes greater than 15 degrees.
■ Mow across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes.
■ Watch for holes, ruts, rocks, hidden objects, or bumps which can cause you to slip or trip. Tall grass can hide obstacles. Remove all objects such as rocks, tree limbs, etc., which could be tripped over or thrown by the blade.
■ Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel you are losing your balance, release the power lever immediately.
■ Do not mow near drop-offs, ditches, or embankments; you could lose your footing or balance.
■ Stop mower, allow blade to completely stop, and remove isolator key.
■ Lift the rear door.
■ Lift the grassbox by its handle to remove from mower.
■ Empty grass clippings.
■ Lift the rear door and reinstall the grassbox as described earlier in this manual.
MAINTENANCE
WARNING
Before performing any maintenance, make sure the mower battery and isolator key are removed to avoid accidental starting and possible serious personal injury.
WARNING
When servicing, use only authorised replacement parts. Use of any other parts may create a hazard or cause product damage.
WARNING
Keep the motor and battery compartments free from grass, leaves or excessive grease. This will help reduce the risk of fire.
GENERAL MAINTENANCE
Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc.
Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please call Greenworks tools customer service for assistance. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.
Periodically check all nuts and bolts for proper tightness to ensure safe operation of the mower.
Wipe the mower clean with a dry cloth occasionally. Do not use water.
LUBRICATION
All of the bearings in this product are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further bearing lubrication is required.
WARNING
Always protect hands by wearing heavy gloves and/or wrapping the cutting edges of the blade with rags and other material when performing blade maintenance. Contact with the blade could result in serious personal injury.
English (Original Instructions)
WARNING
Do not lubricate any of the wheel components. Lubrication may cause the wheel components to fail during use, which could result in serious personal injury to the operator and/or mower or property damage.
REPLACING THE CUTTING BLADE
See figure 10-11.
NOTE: Only use authorised replacement blades. Replace worn or damaged blades and bolts in sets to preserve balance.
blade to come to a complete stop.
■ Remove the battery pack.
■ Turn the mower on its side.
■ Wedge a block of wood between the blade and mower deck to prevent the blade from turning.
■ Loosen the blade bolt by turning it counterclockwise (as viewed from bottom of mower) using a 27 mm wrench or socket (not provided).
■ Remove the blade bolt and blade.
■ Place the new blade on the shaft. Ensure blade is properly seated with shaft going through center blade hole and the two blade posts on the fan inserted into their respective holes on the blade. Make sure it is installed with the curved ends pointing up toward the mower deck and not down toward the ground. When seated properly, the blade should be flat against the fan.
■ Thread the blade bolt on the shaft and finger tighten.
■ Torque the blade bolt down clockwise using a torque wrench (not provided) to ensure the bolt is properly tightened. The recommended torque for the blade bolt is 62.5\~71.5 kgfcm (350-400 in.-lb.).
ENVIRONMENTAL PROTECTION
■ Environmental protection should be a priority of considerable importance when using the machine, for the benefit of both social coexistence and the environment in which we live. Try not to cause any disturbance to the surrounding area.
■ Scrupulously comply with local regulations for the disposal of packaging, deteriorated parts or any elements with a strong environmental impact; this waste must not be disposed of as normal waste, it must be separated and taken to specified waste disposal centres where the material will be recycled.
■ Scrupulously comply with local regulations for the disposal of waste materials after mowing.
■ At the time of decommissioning, do not pollute the environment with the machine, but hand it over to a disposal centre, in accordance with the local laws in force.
English (Original Instructions)
TROUBLESHOOTING
| Problem Possible cause | Solution | |
| Handle is not in position. | Carriage bolts are not seated properly. | Adjust the height of the handle and make sure the carriage bolts are seated properly. |
| Mower is not starting. | Battery is low in charge. Charge the battery. | |
| Battery is either inoperable or will not take a charge. | Replace the battery. | |
| Mower is cutting grass unevenly. | Lawn is rough or uneven or cutting height not set properly. | Move the wheels to a higher position. All wheels must be placed in the same cutting height for the mower to cut evenly. |
| Mower is not mulching properly. | Wet grass clippings are sticking to the underside of the deck. | Wait until the grass dries before mowing. |
| Mower is hard to push. | High grass, rear of mower housing and blade are dragging in heavy grass, or cutting height too low. | Raise the cutting height. |
| Mower is not bagging properly. Cutting | height is set too low. Raise the cutting height. | |
| Mower is vibrating at higher speed. | Blade is unbalanced, excessively or unevenly worn. | Replace the blade. |
| Motor shaft is bent. | Stop the motor, remove isolator key and battery, disconnect the power source, and inspect for damage. Have it repaired by an authorised service center before restarting. | |
| Motor stops while cutting. | Cutting height is set too low. Raise the cutting height. | |
| Battery has no power. | Charge the battery. | |
If these solutions do not solve the problem contact your authorised service dealer.
DIE INSTALLATION DES OBEREN GRIFFS
Siehe Abbildung 3.
T∅MMING AV GRESSBOKSEN
Se figure 9.
GENERELT VEDLIKEHOLD
INSTALACJA KOSZA NA TRAWE
Zobacz rysunek 4.
UNFOLDING AND ADJUSTING LOWER HANDLE
Bakınız Şekil 2.
Greenworks Tools Warranty Policy for DIY machines
PERIOD OF WARRANTY
All new Greenworks Tools machinery is supplied with a 2 year parts and labour warranty from original date of purchase. A 30 day warranty is available for machines used professionally as Greenworks Tools are designed primarily to be used by DIY consumers. This warranty is non-transferable.
LIMITATIONS
This warranty applies only to defective parts/components and does not cover repairs due to:
- Normal wear and tear.
- Routine tune up or adjustment.
- Damage caused by improper handling/abuse/misuse or neglect.
- Overheating due to lack of maintenance.
- Damage due to fittings/fasteners becoming loose/detached through lack of maintenance.
- Damage caused by cleaning with water.
- Machines serviced or repaired by non-authorised Greenworks Tools service centres.
- Machines incorrectly assembled or adjusted.
- Damage caused by improper use of the machine.
- Damage caused by improper winterisation (pressure washers)
- Items considered as consumable parts are not normally covered by the warranty, including but not limited to:
- Batteries
- Electric cables
- Blade and blade assemblies
- Belts
- Filters
-
Chucks and tool holders
-
Certain products may contain components such as engines, transmissions from an alternative manufacturer, these items will be subject to the appropriate manufacturer's warranty policy except where Greenworks Tools Europe GmbH agrees to underwrite any claims outside the said manufacturer's warranty period.
- Second hand goods are not covered under this warranty policy.
- The fitting of spares, replacements or extra components which are not supplied or approved by Greenworks Tools Europe GmbH.
Warranty
To claim a warranty on any product under this policy a proof of original purchase is required. Credit card statement do not qualify as sufficient proof of purchase. In the first instance of a warranty event occurring the consumer should return the product to the original place of purchase with their proof of purchase. The machine will be sent to our central service facility and an inspection made. If the machine be found to be at fault it will be repaired and sent back to the address of the consumer free of charge. Machines that retail for less than €100 euros including sales taxes will generally be replaced.
If the central service facility finds that machine is not found to be at fault then the consumer will be advised they will need to pay for the cost of the repair.
This warranty policy is subject to change from time to time to accommodate the needs of new products. A copy of the latest warranty policy will be available at www.greenworkstools.eu.
Greenworks Tools (DIY)
نامضلا قدم
Greenworks Tools "הכלה"
תְקָרִי אַרְקָרִי
EC DECLARATION OF CONFORMITY FOR MACHINERY
Manufacturer:Changzhou Globe Co., Ltd.
Address: No.65 Xinggang Road Zhonglou Zone Changzhou, Jiangsu 213000
P.R.China
Name: Gary Gao Naixin (Director of Outdoor Power Equipment)
Address: Greenworks Tools Europe GmbH
Wankelstrasse 40.
50996 Koln
Germany
Herewith we declare that the product
CORDLESS MOWER
Category
2504707
Model.
See product rating label
Serial number
See product rating label
Year of Construction
ery Directive (2006/42/EC)
- is in conformity with the relevant provisions of the Machinery Directive (2006/42/EC)
• is in conformity with the provisions of the following other EC-Directive
2014/30/EU (EMC-Directive), and
2000/14/EC (Noise-Directive) incl. modifications (2005/88/EC)
And furthermore, we declare that
- the following (parts/clauses of) European harmonised standards have been used
Measured sound power level
LWA: 90.3 dB(A)
92 dB(A)
Guaranteed sound power level
Conformity assessment method to Annex VI / Directive 2000/14/EC
Westendstrasse 199 Dß80339 Munich Germany
Place, date: Changzhou, 22/07/2016
MIET) Vice president of Engineering
Signature: Gary Gao Naixin (BEng, CEng,
Westendstrasse 199 Dß80339 Munich Germany
Ort, Datum: Changzhou, 22/07/2016 Unterschrift: Gary Gao Naixin (BEng, CEng,
MIET)
Westendstrasse 199 Dß80339 Munich Germany
Lugar, fecha: Changzhou, 22/07/2016 Firma: Gary Gao Naixin (BEng, CEng, MIET)
Westendstrasse 199 Dß80339 Munich Germany
Luogo, data: Changzhou, 22/07/2016 Firma: Gary Gao Naixin (BEng, CEng, MIET)
2000/14/CE (Directive Emissions Sonores) y-comprismodifications (2005/88/CE)
Westendstrasse 199 Dß80339 Munich Germany
Lieu, date : Changzhou, 22/07/2016 Signature : Gary Gao Naixin (BEng, CEng,
Endereço: No.65 Xinggang Road Zhonglou Zone Changzhou, Jiangsu 213000
China
Máquinas (2006/42/EC)
Westendstrasse 199 Dß80339 Munich Germany
Local, data: Changzhou, 22/07/2016 Assinatura: Gary Gao Naixin (BEng, CEng,
MIET) Vice-presidente de Engenharia
EC CONFORMITEITSVERKLARING VOOR MACHINES
Fabrikant:Changzhou Globe Co., Ltd.
Adres: No.65 Xinggang Road Zhonglou Zone Changzhou, Jiangsu 213000 P.R.China
Naam: Gary Gao Naixin (Director of Outdoor Power Equipment)
Adres: Greenworks Tools Europe GmbH
Wankelstrasse 40.
50996 Koln
Germany
Westendstrasse 199 Dß80339 Munich Germany
Место, дата: Changzhou, 22/07/2016 Подпись: Gary Gao Naixin (BEng, CEng,
Adress: Greenworks Tools Europe GmbH
Wankelstrasse 40.
50996 Koln
Germany
Westendstrasse 199 Dß80339 Munich Germany
Plats, datum: Changzhou, 22/07/2016 Underskrift: Gary Gao Naixin (BEng, CEng,
Westendstrasse 199 Dß80339 Munich Germany
Sted, dato: Changzhou, 22/07/2016 Signatur: Gary Gao Naixin (BEng, CEng,
Westendstrasse 199 Dß80339 Munich Germany
Sted, dato: Changzhou, 22/07/2016 Underskrift: Gary Gao Naixin (BEng, CEng,
MIET) Vicedirektør for maskinteknik
DEKLARACJA ZGODNOŚCI WE DLA MASZYN
Producent: Changzhou Globe Co., Ltd.
Adres: No.65 Xinggang Road Zhonglou Zone Changzhou, Jiangsu 213000 P.R. Chiny
Westendstrasse 199 Dß80339 Munich Germany
Westendstrasse 199 Dß80339 Munich Germany
Misto, datum: Changzhou, 22/07/2016
Signature: Gary Gao Naixin (BEng, CEng, MIET) Viceprezident pro strojirenství
VYHLÁSENIE CE O ZHODE FOR MACHINERY PRE STROJNÍCTVO
Výrobca: Changzhou Globe Tools Co., Ltd.
Adresa: No. 65 Xinggang Road Zhonglou Zone Changzhou, Jiangsu 213000, Čina
Westendstrasse 199 Dß80339 Munich Germany
Miesto, dátum: Changzhou, 22/07/2016
Podpis: Gary Gao Naixin (BEng,
Westendstrasse 199 Dß80339 Munich Germany
Kraj, datum: Changzhou, 22/07/2016 Podpis: Gary Gao Naixin (BEng, CEng,
Westendstrasse 199 Dß80339 Munich Germany
Mjesto, datum: Changzhou, 22/07/2016
Potpis: Gary Gao Naixin (BEng,
CEng, MIET)
Westendstrasse 199 Dß80339 Munich Germany
Adresă: No.65 Xinggang Road Zhonglou Zone Changzhou, Jiangsu 213000 China
Westendstrasse 199 Dß80339 Munich Germany
Locul, data: Changzhou, 22/07/2016
Address: Greenworks Tools Europe GmbH
Wankelstrasse 40.
50996 Koin
Germany
Westendstrasse 199 Dß80339 Munich Germany
No.65 Xinggang Road Zhonglou Zone Changzhou,
Jiangsu 213000 P.R.China.
:يَنْقِتُلَا فَلْجِلَا عَمْجِبَ لِوْخُمْلَا صَخْشِلَا نَانْعَرْ مِسَا
Westendstrasse 199 Dß80339 Munich Germany
Yer, tarih: Changzhou, 22/07/2016 Imza: Gary Gao Naixin (BEng, CEng,
Address: Greenworks Tools Europe GmbH
Wankelstrasse 40.
50996 Koln
תְקּרָה
Westendstrasse 199 Dß80339 Munich Germany
Westendstrasse 199 Dß80339 Munich Germany
Vieta, data: Changzhou, 22/07/2016
Parašas: Gary Gao Naixin (BEng,
CEng, MIET)
Adrese: No.65 Xinggang Road Zhonglou Zone Changzhou, Jiangsu 213000
P.R.China
Adrese: Greenworks Tools Europe GmbH
Wankelstrasse 40.
50996 Koln
Germany
Ar šo mês paziņojam, ka prece
Westendstrasse 199 Dß80339 Munich Germany
Vieta, datums: Changzhou, 22/07/2016 Paraksts: Gary Gao Naixin (BEng,
Westendstrasse 199 Dß80339 Munich Germany