EasyTrip - Iron TAURUS - Free user manual and instructions

USER MANUAL EasyTrip TAURUS

CALCÁREAS: Para un perfecto funcionamiento del aparato, éste deberá estar libre de incrustaciones de cal o magnesio, originadas por el uso de aguas de alta dureza. Para evitar este tipo de problema se recomienda el uso de agua destilada o agua puricada. En todo caso, si no es posible el uso del tipo de agua recomendado anteriormente, deberá proceder periódicamente a un tratamiento de descalcicación del aparato, con una periodicidad de: Cada 6 semanas si el agua es “muy dura”. Cada 12 semanas si el agua es “dura”. Para ello recomendamos el uso de un producto especíco para este tipo de aparato, de venta en tiendas especializadas y servicios técnicos autorizados. Downloaded by: pd-oliana on 31-03-2023 13:37 CESTTRAVEL IRON EASYTRIP (VER.III) DESCRIPTION A Steam burst button B Water ll cover C Ceramic soleplate D Pilot light E Dual Voltage selector F Steam regulator G Temperature regulator H Foldable handle button I Cup If the model of your appliance does not have the accessories described above, they can also be bought separately from the Technical Assistance Service. USE AND CARE: Fully extend the appliance's power cable before each use. Do not use the device if the accessories are defective. Proceed to replace them immediately. Use the appliance handle/s, to catch it or move it. To keep the non-stick treatment in good condition, do not use metal or pointed utensils on it. Respect the MAX level indicator. Disconnect the appliance from the mains when not in use and before undertaking any cleaning task. This appliance is for household use only, not professional, industrial use. Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge. Do not store or transport the appliance if it is still hot. Keeping the iron in its housing support at maximum temperature for too long time, may cause its color change, which will not affect the correct working order of the appliance. For a correct operation, keep the soleplate in proper conditions does not operate over metal objects (ironing board metal parts, buttons, zips etc.). It is advisable to use distilled water, especially if the water in your area contains clay or if it is “hard” (containing lime or magnesium). Check that the lid is closed properly before starting the appliance. Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance. Never rest the appliance into a surface while in use. Do not use the appliance on any part of the body of a person or animal. Do not use the appliance with pets or animals. Turn the thermostat control to the minimum (MIN) setting. This does not mean that the iron is switched off permanently. Before using the iron for the rst time, remove the plastic protector from the base (if it has one) clean the base with soft cloth.

INSTRUCTIONS FOR USE

BEFORE USE: Remove the appliance’s protective lm. Make sure that all products’ packaging has been removed. Ensure that the selected tension on the voltage selector coincides with the tension of the mains. To eliminate the smell given off by the appliance when used for the rst time, it is recommended to have it on at full power for 2 hours in a well-ventilated room. Prepare the appliance according to the function you wish to use. VOLTAGE SELECTOR: The appliance has a voltage selector control, situate the selector according to the type of voltage available in the mains where the appliance is to be connected. EN (Original instructions) Downloaded by: pd-oliana on 31-03-2023 13:37 CESTFILLING WITH WATER: It is essential to have lled the deposit with water to be able to work with steam. Open water inlet lid. Fill the deposit taking care to observe the MAX level. Close water inlet lid. USE: Extend the cable completely before plugging it in. Connect the appliance to the mains. Turn the thermostat control to the desired temperature position. The pilot light comes on. Do not use temperatures higher than those indicated on the garments to be treated. ● Temperature for synthetic bers (Polyester, Nylon…). ●● Temperature for silk and wool. ●●● Temperature for cotton. (Minimum temperature for steam ironing) Max Temperature for linen. If garment has various kinds of bers, select the temperature for the ber that requires the lowest temperature. (For example, select the temperature for polyester for an article made out of 60% polyester and 40% cotton). Wait until the pilot light has gone out which will indicate that the appliance has reached an adequate temperature. During the appliance’s use the pilot light will come on and off automatically, indicating the heating elements are working, and therefore maintaining the desired temperature. DRY IRONING: The appliance has an option to dry ironing (without steam). To use this set the steam selector to the ironing position without steam. STEAM IRONING: It is possible to iron with steam whenever the deposit is lled with water, the adequate temperature is selected and the steam selector to the ironing position without steam STEAM BLAST: This function proportions extra steam for eliminating wrinkles. Press the steam blast button. Wait a few seconds until vapor penetrates the bers of the garment before pushing the button again. For optimum steam quality, do not apply more than three successive blasts. The steam blast button has to be pressed repeatedly to release the rst shot. VERTICAL STEAMING: It is possible to iron hanging curtains, items of clothing on his hanger, etc. To do so, follow the instructions: Select the maximum temperature of the iron, while turning the temperature regulator of the iron in a clockwise direction. Wait until the pilot light goes out, which indicated that the selected temperature has been reached. Move the iron in a top to bottom direction while pressing the steam control. Important: for cotton and linen, it’s recommended to put the iron base in contact with the material. For other more delicate bers, it's recommended to keep the iron base at some centimeters of distance. Once you have nished using the appliance: Select the minimum position (MIN) using the thermostat control. Unplug the appliance from the mains. Remove the water from the inside of the appliance. Clean the appliance. PRACTICAL RECOMMENDATIONS: Classify the garments into groups by ironing temperature. The appliance heats up more quickly than it cools down, therefore, to avoid accidents, minimize energy consumption and optimize time, it is advisable to start off ironing items that require lower temperatures and progress to those that need higher temperatures. Pure wool fabrics (100%) can be ironed with the iron set to steam. Select a high steam temperature and place a cotton cloth between the iron’s metal surface and the garment. Downloaded by: pd-oliana on 31-03-2023 13:37 CESTCLEANING Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task. Clean the equipment with a damp cloth with water and then dry. Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance. Never submerge the appliance in water or any other liquid or place it under running water.

HOW TO DEAL WITH LIME SCALE

This product enjoys the recognition and protection of the legal guarantee in accordance with current legislation. To enforce your rights or interests you must go to any of our ofcial technical assistance services. You can nd the closest one by accessing the following web link: http://taurus-home.com/ You can also request related information by contacting us. You can download this instruction manual and its updates at http://taurus-home.com/ Français

COUNTRY ADDRESS PHONE