TAURUS Geyser Eco 3200 - Iron

Geyser Eco 3200 - Iron TAURUS - Free user manual and instructions

Find the device manual for free Geyser Eco 3200 TAURUS in PDF.

📄 52 pages English EN Download 💬 AI Question
Notice TAURUS Geyser Eco 3200 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about Geyser Eco 3200 TAURUS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Iron in PDF format for free! Find your manual Geyser Eco 3200 - TAURUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Geyser Eco 3200 by TAURUS.

USER MANUAL Geyser Eco 3200 TAURUS

natural_image Technical line drawing of a steam iron machine (no text or symbols present)

Plancha de vapor

Steam iron

C Steam flow control

D Auto-cleaning button

E Temperature regulator

F Pilot light

G Auto-off indicator light*

H Filling spout

I Spray nozzle

J Soleplate

K Antiscale cartridge**

*Only available on Geyser ECO 2800/ and Geyser ECO 3000/ Geyser ECO 3200 models

**Only available on Geyser ECO 3000/ Geyser ECO 3200 models

USE AND CARE:

- Fully unroll the appliance's power cable before each use.

- Do not use the appliance if the accessories attached to it are defective. Replace them immediately.

- Do not use the appliance if the on/off switch does not work.

- Use the appliance handle/s, to lift or move it.

- Do not use the appliance at an angle or turn it over.

- Do not turn the appliance over while it is in use or connected to the mains.

- To keep the non-stick coating in good condition, do not use metal or pointed utensils on it.

- Respect the MAX level indicator. (Fig.1)

- Unplug the appliance from the mains when not in use and before undertaking any cleaning task.

- This appliance is for household use only, not professional or industrial use.

- Store this appliance out of reach of children and/or those with reduced physical, sensorial or mental abilities or who are unfamiliar with its use

  • Do not store or transport the appliance if it is still hot.
  • If the iron is left in its housing at maximum temperature for prolonged periods, this may cause discolouration, which will not affect appliance operation in any way.
  • To ensure that the iron functions correctly, keep the soleplate scratch free and do not use it on metal objects (e.g. the ironing board, buttons, zips...)
  • The use of distilled water is recommended, especially if the water in your area contains any type of silt or is “hard” (contains calcium or magnesium).
  • Check that the lid is closed properly before switching the appliance on.
  • Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
  • Never rest the appliance on a surface while in use.
  • Do not use the appliance on any part of the body of a person or animal.
  • Do not use the appliance on pets or animals.
  • Do not use the appliance to dry garments of any kind.
  • Turning the thermostat control to the minimum (MIN) setting does not guarantee that the iron is switched off completely.

INSTRUCTIONS FOR USE BEFORE USE:

  • Peel off appliance's protective film.
  • Make sure that all the product's packaging has been removed.
  • Some parts of the appliance have been lightly greased, consequently, the appliance may give off a light smoke the first time it is used. After a short time, this smoke will disappear.
  • Prepare the appliance according to the function you wish to use:

FILLING WITH WATER:

  • It is essential to have filled the tank with water to be able to work with steam.
  • Open the lid on the filling spout.
  • Fill the tank, taking care to respect the MAX level (Fig. 1).

Close the filling spout lid.

USE:

- Unroll the cable completely before plugging it in.

  • Connect the appliance to the mains.
  • Turn the thermostat control to the desired temperature position.
  • Do not use temperatures higher than those indicated on the garments to be ironed.

- Temperature for synthetic fibres (Polyester, Nylon...).

● Temperature for silk, wool.

●●● Temperature for cotton.

Max Temperature for linen.

  • If garment has various kinds of fibres, select the temperature for the fibre that requires the lowest temperature. (For example, select the temperature for polyester for a fabric made out of 60% polyester and 40% cotton).
  • Wait until the pilot light (F) has gone out, indicating that the appliance has reached an adequate temperature.
  • During use the pilot light (F) will automatically flash on and off, indicating that the heating elements are operating in order to maintain the desired temperature.

DRY IRONING:

- The appliance has a steam flow regulator which, when set to 1, allows dry ironing (without steam).

STEAM IRONING:

- It is possible to iron with steam whenever the tank has water and the adequate temperature is selected.

STEAM FLOW CONTROL:

- The appliance has a (C) control knob for adjusting the steam flow.

SPRAY:

  • The spray can be used in both steam and dry ironing.
  • Press the spray button (A) to use this operation.
  • The spray button has to be pressed repeatedly to release the first spray.

STEAM BLAST:

  • This function provides extra steam for removing creases.
  • Press the steam blast button (B). Wait a few seconds until the steam penetrates the fibres of the garment before pushing the button again. For optimum steam quality, do not apply more than three successive blasts.

- The spray button has to be pressed repeatedly to release the first spray.

VERTICAL IRONING:

  • It is possible to iron hanging curtains, items of clothing on their own hanger, etc. To do so, follow these instructions:
  • Select the iron's maximum temperature by turning the iron's temperature regulator clockwise. (Fig 2)
  • Iron from top to bottom while pressing the steam control (B). Important: for cotton and linen, it is recommended to put the base of the iron in contact with the material. For other more delicate fabrics, it is recommended to keep the base of the iron a few centimetres away.

AUTO-OFF FUNCTION (AUTO-OFF): \*

  • For the purpose of saving energy, the appliance switches to auto-off mode (auto-off) if it is not moved for a particular period of time. When this happens, a beep will sound and the auto-off indicator light (G) will flash, indicating that this function is activated.
  • Auto-off in horizontal position: after about 30 seconds without moving the appliance.
  • Auto-off in upright position: after about 8 minutes without moving the appliance.
  • To return to normal operation, simply move the appliance again.

*Only available on Geyser ECO 2800/ and Geyser ECO 3000/ Geyser ECO 3200 models

ONCE YOU HAVE FINISHED USING THE APPLIANCE:

  • Select the minimum position (MIN) using the thermostat control.
  • Unplug the appliance from the mains.
  • Remove the water from the water tank.
  • Clean the appliance.

CLEANING

  • Unplug the appliance from the mains and let it cool down before performing any cleaning task.
  • Clean the appliance using a damp cloth with a few drops of detergent and then dry it.
  • Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
  • Do not immerse the appliance in water or any other liquid, or place it under a running tap.

SELF-CLEANING FUNCTION:

  • It is important to self-clean the appliance at least once a month to remove calcium and any other built-up minerals inside the iron.
  • Fill the water tank to its maximum level, as indicated in the "filling with water" section.
  • Place the iron in an upright position, plug in to the mains and select maximum temperature.
  • Leave the appliance to heat up until the pilot light indicates that it has reached its consigned temperature.
  • Unplug the appliance and place it in the sink.
  • Press and hold the self-clean button.
  • Let the water flow out through the steam vents in the base, while lightly shaking the appliance.
  • Release the button after a minute or when the tank becomes empty.
  • Leave the iron in the upright position until it has cooled.

ANTISCALE FILTER REPLACEMENT (FIG. X)\*\*

(ATTENTION) Make sure there is no water in the tank.

1 Rest the iron on its heel, rotate the wheel counter-clockwise until it reaches its limit and the arrow is aligned with the open padlock sign (approx. 180^ ) and pull it backward.

2 To reinsert the filter, align the arrow with the open padlock sign and turn clockwise, as shown in the drawing, at the same time pressing the piece inwards until it is aligned with the closed padlock sign.

When the filter is in position, make sure it DOES NOT PROTRUDE from the rear end of the appliance. Otherwise, this means it has not been correctly inserted and water will come out of the tank.

**Only available on Geyser ECO 3000/ Geyser ECO 3200 models

\* HOW TO DEAL WITH LIME SCALE INCRUSTATIONS:

  • For the appliance to work correctly it should be kept free of lime scale or magnesium incrustations caused by the use of hard water.
  • To prevent this kind of problem, we recommend the use of water with low lime or magnesium mineralisation.
  • However, if it is not possible to use the kind of water recommended above, you should periodically replace the iron's anti-scale cartridge:

  • Every 12 weeks if the water is "very hard".

  • Every 18 weeks if the water is "hard".
  • To do so, we recommend the use of a specific product for this type of appliance, on sale in specialised shops and authorised technical services.
  • A specific anti-scale cartridge should be used for this type of appliance.
  • Homemade solutions are not recommended for de-scaling this appliance, such as the use of vinegar.

Français

K Anti-kalk filter**

*Alleen beschikbaar op Geyser ECO 2800/ en Geyser ECO 3000/ Geyser ECO 3200 modellen

KONTROLA WYPŁYWU PARY:

This product enjoys the recognition and protection of the legal guarantee in accordance with current legislation. To enforce your rights or interests you must go to any of our official technical assistance services.

You can find the closest one by accessing the following web link: http://taurus-home.com/

You can also request related information by contacting us.

You can download this instruction manual and its updates at http://taurus-home.com/

Français

GARANTIE ET ASSISTANCE TECHNIQUE

COUNTRY ADDRESS PHONE

Algeria Zone d'Activite, N° 62, Constantine 213770777756
Argentina Av. del Libertador 1298,(B1638BEY), Vicente López (Pcia. Buenos Aires)541153685223
Belgium Mariëndonkstraat 5, 5154 EG, Elshout 31620401500
Bulgaria265,Okolovrasten Pat, Mladost 4, 1766, Sofia35929211120 / 35929211193
Congo (Republic of) 98 Blvd General Charles de Gaulle, Pointe Noire 242066776656
Cyprus 20, Bethlehem Str. / P.O.Box 20430, 2033, Strovolos35722711300
Czech Republic Milady Horakove 357/4, 568 02, Svitavy 420 461 540 130
Equatorial GuineaSN Av Patricio Lumumba y C/ Jesus B, Bata00240 333 082958 / 00240 333 082453
Equatorial GuineaCalle de las Naciones Unidas, PO box 762, Malabo240333082958 / 240333082453
EspañaAvda Barcelona, S/N, 25790 Oliana (Lleida) atencioncliente@taurus.es645 551 242
FranceZa les bas musats 18, 89100, Malay-le-Grand03 86 83 90 90
GhanaEderick Place, Accra-Ghana302682448 / 302682404
Gibraltar11 Horse Barrack Lane, 54000, Gibraltar00350 200 75397 / 00350 200 41023
Greece Sapfous 7-9, 10553, Athens +30 21 0373 7000
Hong KongUnit H,13/F., World Tech Centre, Hong kong(852) 2448 0116 / 9197 3519
HungaryKésmárk utca 11-13, 1158, Budapest+36 1 370 4519
IndiaC-175, Sector-63, Noida, Gautam Budh Nagar - 201301, Delhi(+91) 120 4016200
Ivory Coast 01 Rue Des Carrossiers-Zone 3, B.P 3747, Abidjan 01 (RCI)22521251820 / 225 21 353494
Luxembourg Mariëndonkstraat 5, 5154 EG, Elshout 31620401500
Marruecos Big distribution society 4 Rue 13 Lot. Smara Oulfa, Casablanca(+212) 522 89 40 21
Mauritania 134 Avenue Gamal Abdener Ilot D, Nouakchott 2225254469 / 2225251258
Mexico Rosas Moreno N° 4-203 Colonia de San Rafael C.P. 06470 – Delegación Cuauhtémoc, Ciudad de México(+52) 55 55468162
Montenegro Rastovac bb, 81400, Niksic +382 40 217 055
Netherlands Mariëndonkstraat 5, 5154 EG, Elshout 31620401500
Nigeria 8, Isaac; John Str,G.R.A Ikeja Lagos 23408023360099
Paraguay Denis Roa 155 c/ Guido Spano, Asunción 21665100
Peru Calle los Negocios 428, Surquillo, Lima (511) 421 6047
PortugalAvenida Rainha D. Amélia, n°12-B, 1600-677, Lisboa+351 210966324
RomaniaDudesti Pantelimon 23, 410554, Bucharest031.805.49.58
SerbiaRastovac bb, 81400, Niksic +382 40 217 055
SlovakiaMilady Horakove 357/4, 568 02, Svitavy420 461 540 130
SouthafricaUnit 25 & 26, San Croy Office Park, Die Agora Road, Croydon, Kempton Park, 1619, Johannesburg(+27) 011 392 5652
Tunisia2, Rue de Turquie, Tunis21671333066
UkraineBlock 6, Ap Housing Estate Topol-2, B, 49000, Dnepropetrovsk380563704161 / 380563704161
UruguayLuis Alberto de Herrera 3468, 11600, Montevideo598 2209 28 00
VietnamLot 7 Ind. Zone for, Ha Noi84437658111 / 84437658110

TAURUS Geyser Eco 3200 - GARANTIE ET ASSISTANCE TECHNIQUE - 1

FR
TAURUS Geyser Eco 3200 - GARANTIE ET ASSISTANCE TECHNIQUE - 2

TAURUS Geyser Eco 3200 - GARANTIE ET ASSISTANCE TECHNIQUE - 3

TAURUS Geyser Eco 3200 - GARANTIE ET ASSISTANCE TECHNIQUE - 4
FR

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : TAURUS

Model : Geyser Eco 3200

Category : Iron