AccuSync LCD73VM - Monitor NEC - Free user manual and instructions

USER MANUAL AccuSync LCD73VM NEC

AccuSync LCD73VM AccuSync LCD93VM User’s Manual Bedienerhandbuch Manual del usuario Manuel Utilisateur Manuale utente Руководство пользователя 00_Cover 13/2/07, 4:57 PM1TCO’03 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics

• Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy

• Energy-saving mode after a certain time – beneficial both for the user and the environment

• Electrical safety Emissions

• The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001

• Restrictions on: - chlorinated and brominated flame retardants and polymers - heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user- friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com 00_Cover 13/2/07, 4:57 PM2WEEE Mark (European Directive 2002/96/EC) Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between yourself and NEC. The mark on electrical and electronic products only applies to the current European Union Member States. Outside the European Union If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method. Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union). Disposing of your old NEC product The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life. All required information concerning the disposal of the product and country-specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced energy saving capability. When a VESA Display Power Management Signalling (DPMS) Standard signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode. Mode Power consumption LED colour Normal Operation Approx. 39W Green Energy Saving Mode Less than 2W Amber Off Mode Less than 2W Unlit LCD73VM LCD93VM Mode Power consumption LED colour Normal Operation Approx. 40W Green Energy Saving Mode Less than 2W Amber Off Mode Less than 2W Unlit 00_Cover 13/2/07, 4:57 PM3Chinese RoHS-information relevant for Chinese market 00_Cover 13/2/07, 4:57 PM4English-1 English Declaration of the Manufacturer We hereby certify that the colour monitors AccuSync LCD73VM(L175GZ)/AccuSync LCD93VM (L195GY) are in compliance withRISK OF ELECTRIC SHOCK • DO NOT OPEN TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL. WARNING CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.This symbol warns user that uninsulated voltagewithin the unit may have sufficient magnitude to causeelectric shock. Therefore, it is dangerous to make anykind of contact with any part inside this unit.This symbol alerts the user that important literatureconcerning the operation and maintenance of thisunit has been included. Therefore, it should be readcarefully in order to avoid any problems. CAUTION and marked withNEC Display Solutions, Ltd.4-13-23, Shibaura,Minato-KuTokyo 108-0023, Japan Contents Your new NEC AccuSync LCD monitor box* should contain thefollowing:• AccuSync LCD monitor with tilt base• Audio Cable• Power Cord• User’s Manual• CD-ROM• Base Stand• Cable Holder

Remember to save your original box and packing material to transport or ship the monitor. User’s ManualPower CordAudioCableBase StandCable Holder AccuSync LCD monitorCaptive type (Video signalcable is connected)CD-ROM Quick Start To attach the Base to the LCD Stand:1. Insert the front of the LCD stand into the holes in the front of theBase (Figure S.1).2. Attach the Base to the Stand. The locking tab on the Base shouldfit into the hole on the back of the Stand (Figure S.1).To attach the Cable Holder:1. Attach the Cable Holder on to the Base. Insert the hooks on theCable Holder into the holes at the back of the Stand and slide theCable Holder downward into place (Figure S.1).NOTE: Please confirm that the tabs are completely secure.To attach the AccuSync LCD monitor to your system, follow theseinstructions:1. Turn off the power to your computer.

2. For the PC with Analog output: Connect the 15-pin mini D-SUB

signal cable connected with the monitor to the connector of thedisplay card in your system (Figure A.1). Tighten all screws.For the Mac: Connect the MultiSync Macintosh cable adapter(not included) to the computer. Attach the 15-pin miniD-SUB signal cable to the MultiSync Macintosh cable adapter(Figure A.2). Tighten all screws.NOTE: Some Macintosh systems do not require a Macintosh cableadapter.3. Connect the Audio Cable to the appropriate connector on theback of the monitor (Figure B.1). Connect the Headphone(not included) to the appropriate connector at the front of themonitor (Figure C.1).4. Connect the power cord to the power outlet. Place the VideoSignal Cable and power cord to the Cable holder (Figure B.1).Figure S.1 Base Locking TabsStandFigure A.1 Figure A.2Macintosh CableAdapter (not included)Cable holderAUDIO INPUTConnect to Computeraudio outputFigure B.1Cable HolderCouncil Directive 73/23/EEC:– EN 60950-1Council Directive 89/336/EEC:– EN 55022– EN 61000-3-2– EN 61000-3-3– EN 55024 01_English 13/2/07, 4:57 PM1English-2 English Headphone Figure C.1 Power Button Figure TS.1 Figure R.1 Non-abrasive surface Figure R.2 Figure R.3 4-SCREWS (M4)(MAX depth: 8.5 mm)Weight of LCD assembly: 3.9 kg - LCD73VM (MAX)5.2 kg - LCD93VM (MAX) Specifications Tighten all screws100 mmThickness of Bracket(Arm) 2.0 ~ 3.2 mm Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows:

1. Basic function at pressing each key

Showing OSM. Shortcut to Bright adjust window. Button At No OSD showing Shortcut to Volume adjust window. At OSD showing (Icon selection stage) Go to Adjustment stage. Cursor goes to left. Cursor goes to right. Go to Icon selection stage. Adjust value decrease or Cursor for adjust goes to left. Adjust value increase or Cursor for adjust goes to right. SELECT

“Auto adjust” operate. Reset operation. Mute off/on switch on Volume adjustment window. AUTO/RESET NOTE: Adjust position of cable that place under the Cable holder to avoid damage for cable or monitor. NOTE: Please refer to Caution section of this manual for proper selection of power cord.

5. Turn on the monitor with the front power button and the computer

settings upon initial setup for most timings. For further adjustments, use the following OSM controls:

• Auto Adjust Contrast

• Auto Adjust Refer to the Controls section of this User’s Manual for a full description of these OSM controls. NOTE: If you have any problem, please refer to the Troubleshooting section of this User’s Manual. Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternative mounting purposes:

3. Remove the 3 screws connecting the monitor to the stand and

remove the stand as indicated (Figure R.2). The monitor is now ready for mounting in an alternative manner.

4. Connect the AC cord to the back of the monitor (Figure R.3).

5. Reverse this process to re-attach stand.

NOTE: Use only VESA-compatible alternative mounting method. NOTE: Handle with care when removing monitor stand. Removing the Base NOTE: Always remove the Base when shipping the LCD.

1. Place monitor face down on a non-abrasive

surface (Figure R.1).

2. While using your thumbs,

press the bottom tabs upward to unlock.

3. Press the top tabs down to unlock

and pull off the stand. Connecting a Flexible Arm This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). 100 mm4 x 12 mm with lock washer and flat washer At OSD showing (Adjustment stage) 01_English 13/2/07, 4:57 PM2English-3 English AUDIO Audio volume icon is chosen, depending on the volume condition (AUTO/RESET). BRIGHTNESS Adjusts the overall image and background screen brightness. CONTRAST Adjusts the image brightness in relation to the background. AUTO CONTRAST Adjusts the image displayed for non-standard video inputs. AUTO ADJUST Automatically adjusts the Image Position, the H. Size and Fine setting. LEFT/RIGHT Controls Horizontal Image Position within the display area of the LCD. DOWN/UP Controls Vertical Image Position within the display area of the LCD. H. SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves focus, clarity and image stability by increasing or decreasing this setting.

COLOUR CONTROL SYSTEMS

Five colour presets (9300/7500/sRGB/USER/NATIVE) select the desired colour setting. The sRGB and NATIVE, colour presets are standard and cannot be changed. COLOUR RED Increase or decreases Red. The change will appear on screen. COLOUR GREEN Increase or decreases Green. The change will appear on screen. COLOUR BLUE Increase or decreases Blue. The change will appear on screen. TOOL Selecting TOOL allows you to get into the sub menu. FACTORY PRESET Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. The RESET button will need to be held down for several seconds to tage effect. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button. EXIT Selecting EXIT allows you exit OSM menu/ sub menu. LANGUAGE OSM control menus are available in nine languages.

The OSM control menu will stay on as long as it is in use. In the OSM Turn OFF submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choices are 10 - 120 seconds by 5 seconds step.

This control completely locks out access to all OSM control functions without Brightness and Contrast. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM are locked out. To activate the OSM Lock Out function, press “AUTO/ RESET”, then “+” key and hold down simultaneously. To de-activate the OSM Lock Out, press “AUTO/ RESET”, then “+” key and hold down simultaneously. RESOLUTION NOTIFIER If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at optimal resolution. DDC/CI Turns ON or OFF the two way communication and control of the monitor. MONITOR INFO Indicates the model and serial numbers of your monitor. OSM Warning OSM Warning menus disappear with SELECT button. NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear. RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After power is turned on or when there is a change of input signal or the video signal doesn’t have proper resolution, the Resolution Notifier window will open. This function can be disabled in the TOOL menu. OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesn’t have proper timing, the Out Of Range menu will appear. Sub Menu (Icon Select) Press “–” or “+” Sub Menu (Adjust) Press “SELECT” key Press “–” or “+” Example Tool: Press “SELECT” key Press “SELECT” key Main Menu (Icon Select) Main Menu (Adjust) Press“SELECT” key Press“SELECT” key Press “SELECT” key Adjust by using “–” or “+” Adjust by using “–” or “+”