KH 18 LTX BL 28 Q Set ISA - Hammer METABO - Free user manual and instructions

Product Type	Cordless Rotary Hammer
Brand	Metabo
Model	KH 18 LTX BL 28 Q Set ISA
Battery Voltage	18 V
Motor Type	Brushless
Max. Drilling Diameter in Concrete	28 mm
Max. Drilling Diameter in Steel	13 mm
Max. Drilling Diameter in Wood	30 mm
Impact Energy	2.6 J
No-Load Speed (1st gear)	0 - 1100 rpm
No-Load Speed (2nd gear)	0 - 2000 rpm
Impact Rate	0 - 4200 blows/min
Tool Holder	SDS-Plus and Quick-Release Chuck (Quick)
Weight (with battery)	2.8 kg
Length	350 mm
Height	210 mm
Width	80 mm
Compatible Battery Type	Li-Ion Metabo 18V (CAS)
Battery Capacity (included)	5.2 Ah
Charger Included	ASC 145
Functions	Drilling, hammer drilling, chiseling
Power Adjustment	Electronic Speed Control
Motor Brake	Yes
LED Light	Yes
Set Contents	Hammer, 2 batteries 5.2 Ah, charger, case, bits, drill bits
Warranty	3 years (online registration)

Frequently Asked Questions - KH 18 LTX BL 28 Q Set ISA METABO

What type of battery does the Metabo KH 18 LTX BL 28 Q use?

This rotary hammer uses Li-Ion 18V batteries from the Metabo and CAS (Cordless Alliance System) range.

What is the maximum drilling diameter in concrete?

The maximum drilling diameter in concrete is 28 mm thanks to its powerful brushless motor.

Does the Metabo KH 18 LTX BL 28 Q come with batteries and a charger?

Yes, the KH 18 LTX BL 28 Q Set ISA includes two 5.2 Ah batteries and an ASC 145 charger.

Can I use this hammer for chiseling?

Yes, it has a chiseling function with rotation stop for light demolition work.

What is the weight of the tool with battery?

The weight is approximately 2.8 kg with the 5.2 Ah battery, making it easy to handle.

How do I change the tool holder?

The Q model is equipped with a Quick tool holder that allows you to quickly switch from the SDS-Plus chuck to the keyless chuck without tools.

Is the motor maintenance-free?

Yes, the brushless motor requires no maintenance and offers better runtime and durability.

What is the runtime with a 5.2 Ah battery?

Runtime depends on usage, but with a 5.2 Ah battery, you can drill approximately 50 to 80 holes of 10 mm in concrete.

Is this hammer compatible with other brands' batteries?

It is compatible with all batteries from the CAS (Cordless Alliance System) range, which includes several partner brands.

How do I clean and maintain the tool?

Regularly clean the ventilation slots with a dry brush. Store the tool in a dry place. For servicing, contact an authorized Metabo service center.

USER MANUAL KH 18 LTX BL 28 Q Set ISA METABO

Original instructions

1. Declaration of Conformity

We, being solely responsible: Hereby declare that these chargers, identified by type and serial number *1), meet the requirements of all relevant directives *2) and standards *3). Technical documents for *4) - see page 3.

For UK only:

UK We as manufacturer and authorized person to CA compile the technical file, see *4) on page 3, hereby declare under sole responsibility that these chargers, identified by type and serial number *1) on page 3, fulfill all relevant provisions of following UK Regulations S.I. 2016/1091, S.I. 2016/1101, S.I. 2012/3032 and Designated Standards EN 60335-1, EN 60335-2-29, EN IEC 63000:2018.

2. Specified Conditions of Use

Chargers are only suitable for charging Metabo and CAS (Cordless Alliance System) battery packs.

This device is not designed for use by persons (including children) with physical, sensory or mental disabilities, or with insufficient experience and/or knowledge, unless they are supervised by a person responsible for their safety, or have received instructions on how to use the device by this person.

ASC 30-36 is suitable for charging Li-ion battery packs (14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells).

ASC 55, ASC 55 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 145, ASC 145 SE is suitable for charging Li-ion battery packs (12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC ultra is suitable for charging Li-ion battery packs (corresponding to the print on the tool, either 14.4 V - 36 V, 1.3 Ah - 10 Ah, 4-10 cells, or 12 V - 36 V, 1.3 Ah - 10 Ah, 3-10 cells).

SC 60 Plus is suitable for charging Li-ion battery packs (14.4 V - 18 V, 1.3 Ah - 10 Ah, 4-10 cells).

SC 30 is suitable for charging Li-ion battery packs (12 V - 18 V, 1.3 Ah - 10 Ah, 3-10 cells).

ASC 55, ASC 55 SE is suited for charging NiCd battery packs (12 V, 1.7 Ah, 10 cells).

Never attempt to charge batteries that are not rechargeable. Danger of explosion!

The user bears sole responsibility for any damage caused by inappropriate use.

Generally accepted accident-prevention regulations and accompanying safety instructions should be observed.

3. General Safety Information

WARNING – Read the operating instructions to reduce the risk of injury.

WARNING Read all safety warnings and instructions.

Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for future reference.

Before using the charger, carefully read through and familiarise yourself with all closed safety information e Operating Instructions.

Keep all enclosed documentation for future reference, and pass on your charger only together with this documentation.

4. Special Safety Instructions

For your own protection and for the protection of your power tool, pay attention to its of the text that are marked is symbol!

Danger - electrical voltage!

A slightly acidic, flammable fluid may leak from defective Li-ion battery packs!

If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately!

ENGLISHen

Do not recharge a fully charged battery pack!

Only for use in indoor rooms.

Protect the charger from moisture.

Never allow children to use the device.

Children should be supervised to ensure that they do not play with the tool.

Keep children away from the battery charger and the working area!

Keep your battery charger out of reach of children!

Pull out the mains plug immediately if the battery charger starts to smoke or flames emerge!

Do not insert objects into the ventilation slots on the battery charger – there is a danger of electric shocks and short circuits!

Do not use faulty battery packs. In areas with high metal dust exposure do not charge any battery packs with AIR COOLED chargers.

5. Overview

See page 2. The illustrations are regarded as exemplary for all devices.

1 Battery pack (not in scope of delivery)
2 Sliding seat
3 Operation display
4 Warning display

6. Initial Operation

Before commissioning, check that the rated mains voltage and mains frequency stated on the type plate match your power supply.

Devices like these that generate direct current can influence simple earth leakage protection devices. Use a type F or better, with a release current of max. 30 mA.

Before commissioning the charger, ensure that the air slots are free. Minimum distance to other objects is 5 cm!

6.1 Self-test

Plug in.

The warning display (4) and the operating indicator (3) light up one after the other for approx. 1 second and the installed fan runs for approx. 5 seconds.

7. Use

7.1 Charging battery pack

Push the battery pack completely to the stop on the sliding seat (2).

The operating indicator (3) flashes.

Note: To have the charge level displayed on Li-ion battery packs, first take the battery pack out of the charger and then press the button on the battery pack.

7.2 Conservation charge

Once the charging process has finished, the battery charger automatically switches to conservation mode.

The battery pack can remain in the battery charger and is therefore always ready for use.

The operating display (3) lights up continuously.

8. Faults

8.1 Warning display (4) lights up continuously

Battery pack is not charged. Excessive/insufficient temperature. When the temperature of the battery pack is between 0 °C and 50 °C, the charging process begins automatically.

8.2 Warning display (4) flashes

• Battery pack is defective. Remove the battery pack immediately from the charger.
• The battery pack was not pushed correctly onto the sliding seat (2). See chapter 7.1.

9. Repairs

Repairs to the charger must only be carried out by qualified electricians.

If the mains connection cable of this device is damaged, it must be replaced by the manufacturer

or the Customer Service department of the manufacturer or a similarly qualified person to prevent endangering personnel and property.

If you have Metabo charges that require repairs, please contact your Metabo service centre. See www.metabo.com for addresses.

10. Environmental Protection

Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.

Only for EU countries: never dispose of power tools in your household waste! According to European Directive 2012/19/EU

on Waste from Electric and Electronic Equipment and implementation in national law, used power tools must be collected separately and recycled in an environmentally-friendly manner.

11. Technical Specifications

See page 3.

U = voltage ranges of the battery packs
C = battery pack capacity
l_C = charging current
t = charging time

¹⁾ Depending on the residual capacity and the temperature of the battery pack, real charging times may deviate from the specifications.

Recommended ambient temperature when charging: 0 °C to 40 °C

Changes due to technological progress reserved.

Device of protection class II

\~ AC Power

FRANÇAISfr

Notice originale

C = accupack-capaciteit

I_C = laadstroom

t = laadtijd

Uju wtuwlyh wupftpp, npn6f qt6tpwg6m1d t6 hwnwnwnm6 hwnw6f, lwpnn t6 mqnltL yhi6ptpt6ghwL mwqwhnl1s ufswnnty5kph dpu: YhpwnlF wkwnlp, lquw wnwljlwqncl6p 30 dJU, wfswnndwl hwnwlfnl wejwnwnn daqtkp:

¹ npdwnphnufgh wwng hwnqyltf, np onwnphnufwgh mfgftpju hgnfujmds st6: Nmhqnukl wnfujmq6 5 nd hlnwnlpapnjuni wjl wnwnphnuklph gllwnndwdp:

6.1 Ummiqnli

hynngwlq shmgfkl hnuw6f h ympnwlqhi:

UqqnW6cmW6Jh6 (4) h wcjwnwnGfH h6nhlhwwnnpGtph lmjutpp (3) ymnjnu6 t6 hwgnpnpwpw dwnwnlpwnwtu 1 yph. empuftmuh, gtpumppfjmd hnlmgfdh hndwlmpqq mcjwnmmuf k dum. 5 yph. empuftmuh:

7. Чршннід