SWM 1400 A1 - Washing machine SILVERCREST - Free user manual and instructions

USER MANUAL SWM 1400 A1 SILVERCREST

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

GB/IE Operating Instruction Page 23

1.1. Information about this quick start guide 24
1.2. Explanation of symbols 24

2. Intended use 25

3. Safety instructions 25

3.1. General safety instructions 26

4. Package contents 29

5. Description of components 29

6. Technical specifications 30

6.1. Product data sheet 30

7. EU declaration of conformity 30

8. Spare parts 30

9. Installation 30

9.1. Removing the transit bolts 31
9.2. Setup and levelling 31
9.3. Connection to water supply 31
9.4. Aqua stop 31
9.5. Drainage 32
9.6. Connecting to the mains 32
9.7. Attaching the stickers 32

10. Possible displays 33

11. Overview of the wash programmes 33

12. Notes for operating the appliance 35

12.1. The first wash cycle 35
12.2. Detergents and finishing agents 35
12.3. Dosage 36

13. Operation 36

13.1. Opening/closing the washing machine door 36
13.2. Selecting and starting a wash programme 36
13.3. Interrupting a programme 36
13.4. End of wash programme 36
13.5. Cancelling a programme/draining water 36
13.6. Setting additional functions 37

13.6.1. Selecting the start time of the wash cycle 37
13.6.2.Temperature selection 37
13.6.3. Spin speed 37
13.6.4.Anti-crease 37
13.6.5. Safety lock.. 37

14. Disposal 38

15. Service 38

15.1. Supplier/Producer/Importer 38

SILVERCREST

1. Introduction

1.1. Information about this quick start guide

This quick start guide is part of the user manual. The complete user manual is available for download at https://www.lidl-service.com. Keep this quick start guide in a safe place, together with the user manual. If you give this product to someone else, ensure that you also hand over all the documents. Read through the user manual before use and comply with the safety instructions in particular.

1.2. Explanation of symbols

DANGER!

Warning: risk of fatal injury!

Follow the instructions to avoid situations that will lead to fatal or serious injuries.

DANGER!

Warning: risk of electric shock!

Follow the instructions to avoid situations that will lead to fatal or serious injuries.

WARNING!

Warning: risk of possible fatal injury and/or serious irreversible injuries!

Follow the instructions to avoid situations that may lead to fatal or serious injuries.

CAUTION!

Warning: risk of minor and/or moderate injuries!

Follow the instructions to avoid situations that may lead to moderate or minor injuries.

NOTICE!

Follow these instructions to prevent damage to the appliance!

Follow the instructions to avoid situations that may damage the appliance.

Notes regarding assembly or operation

Follow the instructions in the user manual!

AC (alternating current)

Instruction to be followed to prevent hazards

Bullet point/information on steps during operation

Instruction to be carried out

Products that feature this symbol meet the requirements of the EU directives (see section entitled "EU declaration of conformity").

Tested safety: products that feature this symbol meet the requirements of the German Product Safety Act.

Packaging material label regarding waste separation

Label includes abbreviations (a) and numbers (b) with the following meaning: 1-7: plastics/20-22: paper and cardboard/80-98: composite materials.

Dispos of packaging in compliance with environmental regulations (see the "Disposal" section).

Dispos of packaging in compliance with environmental regulations (see the "Disposal" section).

Dispos of the appliance in compliance with environmental regulations (see the "Disposal" section).

The "Triman" symbol tells the consumer that the product can be recycled, is covered by an extended system of manufacturer's responsibility and must be sorted by material type, in France.

Eco-Logic System

The Eco-Logic system (automatic load control) adjusts the amount of water used and the duration of the wash programme when the washing machine is at half load or less. This saves time, energy and water.

2. Intended use

This washing machine must be used only to wash items which are specified by the manufacturer as being washable on the wash care label. The appliance is intended for private/domestic use.

The manufacturer accepts no liability for damages if the appliance is used commercially, misused or is used contrary to the instructions provided in the quick start guide/user manual. The appliance is intended for private/domestic use.

Please note that we shall not be liable in cases of improper use:

• Do not modify the appliance without our consent and do not use any auxiliary equipment that we have not approved or supplied.
  Only use replacement parts or accessories that we have supplied or approved.
  Comply with all the information in this user manual, especially the safety instructions. Any other use is considered improper and can cause personal injury or property damage.
  The warranty for the appliance does not cover damage due to external factors such as fire, floods or other causes of damage.

3. Safety instructions

IMPORTANT SAFETY INSTRUCTIONS – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!

This appliance is designed for use in households. It is not suitable for applications such as:

• in kitchens for staff in retail outlets, offices and other commercial areas

-in agricultural holdings
-by customers in hotels, motels and other residential environments
-in bed & breakfast accommodation
- areas for communal use in apartment blocks.

This appliance can be used by children of 8 years and older, and by people with reduced physical, sensory or mental capacity, or with a lack of experience and/or knowledge, but only with proper supervision, or if they have been told how to use the appliance safely, and have understood the risks involved if they use it improperly.
Children must not be allowed to play with the appliance.
- Cleaning and user maintenance must not be carried out by children unless they are supervised.
Children younger than 8 should be kept away from the appliance and the connection cable.
- Keep all packaging materials used (bag, pieces of polystyrene etc.) out of reach of children.

SILVERCREST

Make sure that children do not climb into the appliance or place objects inside it.
Make sure that children do not climb onto the appliance.
Children under 3 years of age must be supervised at all times when in the vicinity of the appliance.
Supervise children and small animals in the vicinity of the washing machine at all times.

3.1. General safety instructions

DANGER!

Risk of electric shock!

There is a risk of injury from electric shock.

Before using for the first time and after each use, check the washing machine and the mains cable (10) for damage.
- Only connect the washing machine to a power socket with a properly installed protective conductor (earthing) system. It is essential that this standard safety requirement is met. If in any doubt, please have the wiring system of the building tested by a qualified electrician.
The appliance may only be installed by an authorised professional. The manufacturer is not liable for damage resulting from improper setup or incorrect installation by unauthorised persons.
The manufacturer cannot be held responsible for damage caused by a missing or inadequate earthing system.
- The local mains voltage must match the voltage stated in the technical specifications for the appliance.
The power socket must be easily accessible so that you can unplug the appliance from the mains quickly if necessary.
- Do not, under any circumstances, make any unauthorised modifications to the appliance or try to open a component and/or repair it yourself. Improper repairs may result in unforeseeable dangers for the user, for which the manufacturer accepts no liability.
Repairs must only be carried out by an authorised specialist, otherwise no warranty claim can be made in the event of consequential damage.
■ Do not use the washing machine if you notice that it, or its mains cable (10), is damaged.
■ Contact our Service Centre without delay if the appliance has been damaged during transport.
Make sure that the power cable is undamaged and does not run underneath the appliance or over any sharp edges.
If the mains cable (10) of this appliance is damaged, it must be replaced by the manufacturer (or relevant customer service) or other suitably qualified person. This is to avoid hazards.

Only install the appliance in a protected dry room.

Do not use an extension cable.

The appliance is switched off by turning the programme selector (2) to the (AUS) [off] position. It only ceases to be live when you pull the plug out of the socket. The socket must be easily accessible at all times.
Do not expose the appliance to extreme conditions. Avoid:

• high humidity or wet conditions
• extremely high or low temperatures
  direct sunlight

• naked flames.

• Do not place objects on top of the washing machine. The vibration during operation can cause them to fall.

Warning! Risk of injury!

There is a risk of injury due to burns caused by hot surfaces.

• When washing at high temperatures, the porthole window becomes hot. When washing at high temperatures, children over the age of 8 may only use the appliance if supervised by an adult, owing to the high temperatures.
• Do not allow children to touch the porthole window during the wash cycle.

CAUTION! Risk of injury.

The appliance is heavy. There is a risk of injury from the strain of lifting the appliance.

• Seek the assistance of at least one other person in order to move the appliance or use mechanical transport aids.

NOTICE! Risk of damage!

Risk of damage to the appliance if installed incorrectly.

The ambient temperature required to operate your washing machine is 15^ to 25^ .
- Do not install your washing machine in rooms where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Before using the washing machine for the first time, remove the transit bolts (8) at the rear of the machine (see "9.1. Removing the transit bolts" on page 31). During the spin cycle, a transit bolt (8) which is still in place may result in damage to both the washing machine and adjacent furniture or appliances.
- Do not place the washing machine on carpet or any other surface that obstructs the air circulation underneath the appliance.
- Only use new and complete hoses including the necessary fittings. Replace used hoses with new ones.
The water pressure of the mains must be min. 0.1 MPa (1 bar), max. 1 MPa (10 bar).
- Only connect the washing machine to a cold water inlet. It is not suitable for hot water connection.
Turn off the stopcock if the washing machine is to be left for any length of time (e.g. holidays), especially if there is no floor drain for water in the immediate vicinity.
- Do not lie the appliance on its side and do not turn it upside down.
■ Do not lift the appliance by the washing machine door (4) or the detergent compartment (1).

NOTICE! Risk of leakage!

Danger from poor drainage or incorrectly fitted drain hose.

• Only use new and complete hoses including the necessary fittings. Replace used hoses with new ones.
  The water pressure of the mains must be min. 0.1 MPa (1 bar), max. 1 MPa (10 bar). Only supply the washing machine with cold water.
  Before hooking the drain hose (9) into a wash basin, check that the water can drain off quickly enough to prevent the sink from overflowing.
  Make sure that the drain hose is secure, so that the force of the water flowing out of the hose does not dislodge it.

SILVERCREST

NOTICE! Risk of damage!

Risk of damage to the appliance due to incorrect operation.

The maximum load for this washing machine is 8kg (dry weight).

The maximum recommended loads for individual programmes can be found in section "11. Overview of the wash programmes" on page 33.

Take care to ensure that foreign objects (e.g. nails, pins, coins, paper clips) do not find their way into the washing machine with the laundry. These may damage components of the machine (e.g. suds container, drum), which in turn can result in damage to the laundry.

If the correct amount of detergent is dispensed, the washing machine should not need to be descaled. If, however, you do wish to descale the washing machine only use proprietary non-corrosive descending agents. These special descending agents are available to order from your specialist dealer. Follow the instructions for use of the descending agent carefully.

Textiles which have been pre-treated in solvent based cleaning agents must be thoroughly rinsed in clean water before being washed in the washing machine.

Textiles contaminated with flour must not be washed in the appliance, as this can damage the washing machine.

• Do not use solvent based cleaning agents, e.g. those containing benzine, in this washing machine, as this may result in damage to component parts and create toxic fumes. Such agents also pose a fire and explosion hazard.

• Do not use solvent based cleaning agents, e.g. those containing benzine, to clean the surfaces of the machine. They can cause damage to plastic surfaces.

Only use dyes specified by the manufacturer as being suitable for use in a domestic washing machine. Always observe the manufacturer's instructions carefully. Colour run and dye removers contain sulphur compounds that can cause damage such as corrosion. Do not use these products in this washing machine.

If detergent comes into contact with the eyes, rinse them thoroughly with lukewarm water immediately.

If swallowed, seek medical assistance immediately.

Those with skin problems or sensitive skin should avoid their skin coming into contact with detergent.

After operation, unplug the appliance from the power socket and turn off the water supply to the washing machine.

Make sure that there is no water left in the drum before opening the washing machine door (4).

Pets or children could get into the drum. Make sure that the drum is empty before each use.

The washing machine must not be operated in rooms with flammable or explosive gases.

Before using the washing machine for the first time, run a wash cycle (90°C/no detergent) with no laundry.

Do not wash rugs in the washing machine.

Residues can build up if detergent or fabric softener comes into contact with the air for a longer period of time. Therefore, only pour the detergent or fabric softener into the appliance immediately before starting the wash cycle.

WARNING! Risk of injury!

There is a risk of scalding due to hot running water.

Lay the drain hose in such a way that hot water can drain away without people coming into contact with it.

Never add water by hand during the wash cycle.

• When the programme ends, wait until the washing machine door (4) can be opened.
  ■ Never forcibly open the washing machine door (4) if your washing machine is running.
• Never open the detergent compartment (1) while the appliance is in operation. Do not climb or sit on the washing machine. Do not lean against the washing machine door (4).
• Do not try to close the washing machine door (4) using excessive force. If the washing machine door (4) does not close, check if the drum is overloaded or if any laundry is sticking out.

4. Package contents

DANGER!

Risk of choking and suffocation!

There is a risk of choking and suffocation due to swallowing or inhaling small parts or plastic wrap.

• Keep the packaging material and small parts out of the reach of children.

Please check your purchase to ensure that all items are included and in perfect condition. If anything is missing or damaged, please contact us within 14 days of purchase.

The following items are supplied with your product:

• Washing machine
• Drain hose (already fitted)
• Inlet hose with mechanical aqua stop
  4 blind plugs for the transit bolt openings
  Liquid detergent insert
• 2 stickers (for programme selector (2)/additional programme buttons)
• Quick start guide

The complete user manual is available for download at https://www.lidl-service.com.

5. Description of components

See Fig. A

1) Detergent compartment
2} Programme selector
3) Control panel/display
4) Washing machine door with porthole window
5) Door handle
6) Drain pump filter cover

See Fig. B

7) Connection for water inlet hose with mechanical aqua stop
8) Transit bolts
9) Drain hose
10) Mains cable

See Fig. C

11) Operating display
12) Start/Pause button
13) Knitterschutz (anti-crease) button
14) Startzeitvorwahl (delay start time) button
15) Schleudern (spin) button
16) Temperatur (temperature) button
17) Digital display of temperature/spin speed/time

SILVERCREST

See Fig. D

18) Liquid detergent insert
19) Detergent compartment for main wash (compartment II)
(20) Fabric softener compartment (
21) Detergent compartment for prewash (compartment I)

6. Technical specifications

Power supply: 220-240 V~ 50 Hz
Rated power: 2200 W
Rated current: 10 A
Electrical protection class: 1
Capacity: 8 kg
Water pressure: Maximum 1 MPa/minimum 0.1 MPa
Connection to water supply Cold water
Weight (net)	65.2 kg
Ambient temperature	15°C to 25°C

6.1. Product data sheet

Scan the QR Code shown to download the product data sheet or contact the service department at www.mlap.info/ contact to obtain a printed copy of the product data sheet. You will also find the QR code on the energy label.

7. EU declaration of conformity

CE MLAP GmbH hereby declares that the product conforms to the following requirements of the European Union:

EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Ecodesign Directive 2019/2023
RoHS Directive 2011/65/EU.

8. Spare parts

If you would like to order spare parts, please contact us using the contact form at www.mlap.info/contact.

The washing machine drive belt may only be changed by authorised specialist personnel.

The minimum period for the supply of spare parts for your household washing machine is 10 years.

9. Installation

WARNING!

Risk of electric shock and material damage!

There is a risk of electric shock as well as material damage if the appliance is connected improperly.

The electricity and water supply should only be connected by a qualified expert.

The following sections will explain the steps necessary to install the washing machine.

Remove the packaging material and all protective film.

9.1. Removing the transit bolts

The transit bolts (8) must be removed before using the appliance for the first time. Faults that occur as a result of operating the appliance with the transit bolts still in place are not covered by the warranty.

Unscrew the 4 transit bolts (8) using a 10mm spanner (see Fig. E).
Remove the transit bolts together with their bases from the rubber bushings.
Cover the holes using the blind plugs supplied.

Keep the transit bolts (8) (e.g. in case you need to transport the appliance elsewhere in future). Only transport the washing machine with the transit bolts (8)fitted.

9.2. Setup and levelling

Make sure that the appliance is installed on a stable, flat surface (see Fig. F) to ensure vibration-free operation. The place of installation must be in the immediate vicinity of a drain and water connection as well as a domestic power socket.
Provide adequate space for the installation and prepare the installation site so that electricity and water connections are properly available and easily accessible.
Level the washing machine by turning the adjustable feet. Turn the adjustable foot to the right or left to turn the adjustable foot in or out. Then screw the plastic ring all the way up to prevent the adjustable foot from shifting (see Fig. G). After setting up and levelling the washing machine, check the stability by pressing down on each corner of the machine to see if it moves.
Only connect the appliance to a properly installed earthed mains socket if the water inlet and outlet have been connected correctly (see next section).
The mains plug (10) must remain easily accessible after installing the appliance (see Fig. H).

Never place cardboard, wood or similar materials under the appliance to compensate for any unevenness in the floor.

When cleaning the floor in the area of the adjustable feet, take care not to change the setting of the adjustable feet.

9.3. Connection to water supply

Screw the cuff with angled end of the water hose to the water connection (7) on the back of the washing machine (see Fig. 1).
Connect to suitable cold water mains supply (main stopcock) with 3 / 4'' threaded union (see Fig. J).

NOTICE!

Risk of damage!

Risk of damage to the appliance if installed incorrectly.

• Only use new and complete hoses including the necessary fittings. Replace used hoses with new ones.
  The water hose including seals is located in the drum.
  The water pressure of the mains must be min. 0.1 MPa (1 bar), max. 1 MPa (10 bar).
• Only connect the washing machine to a cold water inlet. It is not suitable for hot water connection.

After connection, check that the hose is not twisted.
After connecting the hose and valve, check for tightness.
Check the condition of the water hose regularly.

9.4. Aqua stop

If the hose is damaged, the aqua stop system reacts and cuts off the water supply to the washing machine. The indicator in the viewing window (see a, Fig. J) on the aqua stop device turns red in this case. The inlet hose must be replaced.

SILVERCREST

9.5. Drainage

The waste water hose (9) is located at the rear of the washing machine.

NOTICE! Possible material damage!

Risk of material damage if installed incorrectly.

• Secure the waste water hose so that it does not move back and forth during operation of the washing machine (see examples Fig. K, M, N).
  The outlet of the waste water hose must be placed above the water level of the drum (min. 0.6 m, max. 1 m, see Fig. K/L).
  Do not push the waste water hose too deeply into the drain pipe!

Connect the waste water hose to a waste water drain pipe (see Fig. K) or to a siphon (see Fig. N) or hang the end of the waste water hose in a sink (see Fig. M). Due to the water pressure at the hose outlet, draining the waste water into a small washbasin is not possible.

If necessary, use a retaining bracket (not supplied) to hang the drain hose (9) in order to ensure that the drain hose is firmly attached.

Make sure that the hose is free of kinks.

9.6. Connecting to the mains

Fig. 0

Once you have connected the washing machine to the water supply and drainage, connect the mains plug (10) to a power socket. (See Fig. Q)
The power socket must be easily accessible so that you can unplug the appliance from the mains quickly if necessary.

9.7. Attaching the stickers

Upon delivery, the printing on the programme selector (2) is in German. A sticker is supplied in the national language of each country of delivery.

Fig.P

Affix the sticker with cut-out for the programme selector (2) to the appliance in accordance with the programme selector positions (see Fig. P).

Fig. Q

Affix the sticker with the button names in your national language corresponding to their function underneath the buttons (12-16) (see Fig. Q).

10. Possible displays

When the washing machine is in use, the following displays in the digital display (17) are possible:

Time remaining until the end of the wash programme

The time shown may vary from the actual programme duration depending on the temperature and water pressure, the size of the load, the amount of detergent etc. The time is updated automatically during the wash cycle, temporary stops or time jumps are possible.

• When the button lock is active, CL is displayed.
  After the end of the programme, End is displayed
• In the event of malfunctions, error codes (e.g. E01) are shown on the digital display, see "Troubleshooting" section in the complete user manual.
• Set spin speed
• Temperature

The following symbols appear or flash on the display (1 1) when the appliance is in use depending on the active function:

Function Symbol
Prewash/wash cycle	山
Rinse	山
Spin	◎
Time selection	L
Anti-crease	D
In operation (lights up continuously)/operation interrupted (flashes)	DII

The listed symbols flash as long as a programme/function has been selected but not yet started or interrupted. The symbols are displayed continuously when the programme/function is active.

11. Overview of the wash programmes

Wash programme name	Temperature [°C]	Available additional functions				Detergent compa-ment			Time [min]	Max. dry weight of the washing (kg)	Washing recommendation
		Delay start time	Spin	Temperature	Anti-crease	Prewash I	Main wash II	Fabric softener
Cotton 90 °C	90°	■	■	■	■	X 1	87●8	Hoavily or moderately	165 8	Moderately soiled laundry made of cotton or linen, bed linen, table linen, underwear, towels (max. 4 kg)*, linen	Soiled laundry made of cotton or linen, bed linen, table linen, underwear, towels (max. 4 kg)*, linen
U Collon (with pre-wash)	60°	■	■	■	■	●	●	○
Cotton 60 °C	60°	■	■	■	■	X	●	○	215	8 No	ormally soiled laundry made of cotton or linen, bed linen, table linen, underwear, towels (max. 4 kg)*, linen

SILVERCREST

Wash programme name

Temperature [°C]

Available additional functions

Detergent compa-ment

Time [min]

Max. dry weight of the washing (kg)

Washing recommendation

Delay start time

Spin

Temperature

Anti-crease

Prewash I

Main wash II

Fabric softener

Cotton 20 °C

20°

■

■

■

■

X 95

Lightly

coiled laundry

de of cotton or linen, bed linen, table linen, under-wear, towels (max. 2 kg)*, linen Use liquid detergent.

Eco 40-60 °C

40°

■

■

■

■

X 21

138

Nonally soiled laundry

made of cotton and indicated as being washable at 40°C or 60°C can be washed together in the same cycle. This programme is used to assess the compliance with the EU ecodesign legislation.

Wool

30°

■

■

■

-

X

●

○4

2.5 C clothing mode of wool that features the symbol on the inner label of the clothing may not be washed in the washing machine.

Rinse

-

■

■

-

■

X

X

○

428 Programme for rinsing with finishing agents such as antistatic agents and fabric softeners. Reduce the spin speed in case of extremely delicate fabrics.

Allergy

60°

■

■

■

■

X 21

134

The wash programme is intended for washing the clothes of people with sensitive skin and is suitable for children's clothes, for example.

Spin

-

■

■

-

■

X

X

X

17

8

Spin, e.g. after hand washing

Hand wash/ delicates

30°

■

■

■

-

X

●

○90

2.5 Very fine fabrics, see textile label Use liquid detergent.

Sport

40°

■

■

■

■

X 11

○●

○5

Sports laundry

Mix

30°

■

■

■

■

X

●

○

81

3.5 Soilied laundry made of cotton, synthetic material or synthetic blends that can be washed together and laundry designated as easy-core, use liquid detergent.

Shirts

60°

■

■

■

-

X

●

○

112

4

Soiled laundry made of cotton, synthetic material or synthetic blends (shirts, blouses)

Quick 60'

60°

■

■

■

■

X 60

●Soilied

laundry made of cotton, synthetic material, coloured items, linen. (For a 2 kg load, the wash cycle is shortened by half).

Quick 15'

30°

■

■

■

■

X

●

○

15

2 Lightly soiled, sweaty clothing made of cotton and linen. Due to the short wash duration, use less detergent. Distribute laundry evenly. Use liquid detergent.

Highly absorbent laundry

The duration of the wash cycle may vary depending on the weight of the laundry, the water supply, the ambient temperature and additional functions that are activated.

For wash programmes with low temperature you should use liquid detergent. The amount of detergent required may vary depending on the amount and degree of soiling of the laundry. Please follow the detergent manufacturer's recommendations for the amount of detergent used.

The following symbols are used in the "Overview of the wash programmes":

Use a detergent or fabric softener if required.
Detergent is required.

X Detergent or fabric softener cannot be used.

Switch on possible

Not available

12. Notes for operating the appliance

We recommend using standard detergents suitable for washing machines in powder or liquid form for all temperature settings according to the detergent manufacturer's instructions on the packaging.

Refer to the following table for information on which detergents are suitable for which textiles. Select a wash programme suitable for your laundry (see "11. Overview of the wash programmes" on page 33).

	Universal deter- gent	Colour deter- gent	Delicate deter- gent	Special deter- gent	Fabric softener
Cotton -	● -	●			●
Sport/Mix (synthetics)	●	●	●	-	●
Wool - - -				●	●
Hand wash/ delicates (e.g. silk)*	-	-	-	●	●
Quick* -	● -	●	-
Shirts -	● -	●			●
Allergy -	● -	●			●

• Use liquid detergent

12.1. The first wash cycle

Before using the machine for the first time, run a wash programme at high temperature (90^) without laundry items and detergent to self-clean the washing machine:

Connect the washing machine to the power supply and turn on the stopcock.
Set the programme selector (2) to the Cotton 90^ programme.
Press the Start/Pause button (12).

12.2. Detergents and finishing agents

Follow the instructions of the manufacturers of fabric softeners and finishing agents.

Pour the detergent for the pre-wash cycle into compartment I (21).
Pour the detergent for the main wash cycle into compartment II (19).
For liquid detergent, insert the liquid detergent insert in compartment II (19). Make sure that the insert fits into the guide nose of compartment II (19).
Pour liquid detergent into the front chamber II separated from the liquid detergent insert (18). The liquid detergent insert prevents the liquid detergent from immediately flowing away. Note the dosage markings 100/150/200.
We recommend using liquid detergent for the wash programme at low temperatures.
Pour the fabric softener into the middle chamber (20) of the compartment marked with the symbol. Fabric softener is automatically added during the last rinse cycle.
Never add more fabric softener than indicated on the chamber of the compartment (MAX mark).

SILVERCREST

12.3. Dosage

Follow the instructions of the detergent manufacturer.

Note that the dosage depends on the degree of soiling, the amount of laundry and the hardness of the water.

13. Operation

Prepare the laundry: pre-sort laundry items, close buttons and zips, remove metal buckles, empty pockets, close bed covers and pillow cases, pre-treat stains, put the laundry in. Put delicate items and bras in a textile bag.
Put detergent in the detergent compartment (1).
Connect the mains plug (10) to a suitable socket and turn on the water tap (if applicable).

13.1. Opening/closing the washing machine door

To open the washing machine door (4), pull the door handle (5). Open the washing machine door (4) fully to load the drum with laundry.
To close the washing machine door (4), gently press the washing machine door (4) closed until you hear it click shut.

13.2. Selecting and starting a wash programme

Set the programme selector (2) to the desired position (to select the appropriate wash programme, see also "Overview of the wash programmes").
In the operating display (11) the symbol for the wash cycle and the symbol for start/pause flash. The programme duration is shown on the digital display (17).
To adapt the wash programme to your individual requirements, you can, for example, change the temperature and spin speed settings or switch on additional functions (see "13.6. Setting additional functions" on page 37).

Add detergent.

Press the Start/Pause button (12) to start the wash cycle.

As soon as the wash programme is running, the symbols light up continuously.

13.3. Interrupting a programme

Press the Start/Pause button (12) to interrupt the wash programme.
In PAUSE mode, the symbol for the wash cycle and the symbol for start/pause flash.
If you want to add laundry after the programme has started it should be done in the first minutes of the wash cycle to achieve a good wash result. If the water level in the drum is still low, the washing machine door (4) can be opened after a short time and the laundry can be added.
Then close the washing machine door (4).
Press the Start/Pause button (12) again to continue the wash programme.

The PAUSE function can be used to soak the laundry. Soaking can improve the washing result for heavily soiled laundry.

Wait about 10 minutes after starting the selected programme and then press the Start/Pause button (12).
- When the desired soaking time has elapsed, press the Start/Pause button (12) again to continue the wash programme.

13.4. End of wash programme

The end of the wash programme is indicated by End in the digital display (17).

Switch off the washing machine by setting the programme selector (2) to the Aus (off) position.
Wait until the washing machine door (4) has been unlocked (see also "Door lock" in the complete user manual). Then open the washing machine door (4) and remove the laundry promptly to avoid creasing. Pull the mains plug (10) out of the mains socket.
Turn off the stopcock.
Leave the washing machine door (4) open and pull out the detergent compartment (1) slightly to allow the inside of the appliance to dry to avoid mould or unpleasant odours.

If no further buttons are pressed, the washing machine switches to standby mode 15 minutes after the end of the programme.

13.5. Cancelling a programme/draining water

To cancel a programme, turn the programme selector (2) to the Aus (off) position.
To drain the remaining water, set the programme selector (2) to any programme. The water is drained and the programme is cancelled. In the operating display (11) the function symbol for the selected programme flashes (see table in section "10. Possible displays" on page 33) as well as the symbol for start/pause.

Then set the new wash programme and add detergent to the detergent compartment (1) again if necessary.
Press the Start/Pause button (12) to start the wash cycle.
If you do not want to start a new wash cycle after the water has been drained, do not select a new wash programme, instead turn the programme selector (2) to the Aus (off) position to switch off the appliance.

13.6. Setting additional functions

The setting options listed below depend on the programme and are therefore not available in all wash programmes.

13.6.1. Selecting the start time of the wash cycle

The delay start time function can be used to start the wash cycle at a specific time.

Close the washing machine door (4).

Set the programme selector (2) to the desired position (see "11. Overview of the wash programmes" on page 33).
Select additional functions as required (see "13.6. Setting additional functions" on page 37).
Press the Startzeitvorwahl (delay start time) button (14) several times to set the desired delay for the wash start. It is possible to set a value of 1 to 23 hours. The digital display (17) shows 1h, 2h, 3h etc. depending on the setting.
Press the Start/Pause button (12). The washing machine goes into wait mode. The wash cycle starts automatically after the start time delay has expired. The remaining time and the symbol are displayed when the delay start time function is selected.

To switch off the delay start time, press the Startzeitvorwahr (delay start time) button (14). Then start the wash cycle by pressing the Start/Pause button (12) without a preset delay start time.

13.6.2. Temperature selection

Press the Temperatur (temperature) button (16) several times to set the required temperature for the selected wash programme.

Depending on the wash programme, the following setting options are shown in the digital display (17):

• - C (cold water) - 30^ - 40^ - 50^ - 60^ - 70^ - 80^ - 90^.

13.6.3. Spin speed

Press the Schleudern (spin) button (15) several times to set the spin speed per minute when draining the water. Depending on the wash programme, the following setting options are shown in the digital display (17): - (no spin), 400 - 600 - 800 - 1000 - 1200 - 1400.

The noise level and the residual moisture content depend heavily on the spin speed. The higher the spin speed in the spin cycle, the more noise and the lower the residual moisture content.

13.6.4. Anti-crease

Press the Knitterschutz (anti-crease) button (13).

The symbol lights up constantly. This function reduces creases by reducing the speed of the drum rotation of the laundry. The function makes ironing easier because of fewer creases in the laundry.

For programmes where the anti-crease function cannot be selected, the symbol flashes briefly and goes out.

13.6.5. Safety lock

This feature locks the function buttons and the programme selector (2), which prevents changing settings or interrupting the running wash programme.

Press and hold the Startzeitvorwahr (delay start time) (14) and Knitterschutz (anti-crease) (13) buttons simultaneously for approx. 3 seconds (marked with l switch the safety lock on or off.

As soon as the safety lock has been activated, CL is shown in the digital display (17) for approx. 2 seconds and then goes out. When a button (12-16) or the programme selector (2) is pressed, CL is shown in the digital display (17) for approx. 2 seconds to indicate the safety lock. If the programme selector (2) is adjusted during a wash cycle, the programme that was set before the safety lock was activated will be continued.

The detailed information about your product, please refer to the user manual. The complete user manual is available for download at https://www.lidl-service.com.

SILVERCREST

14. Disposal

PACKAGING

Your appliance has been packaged to protect it from damage in transit. The packaging is made of materials that can be recycled in an environmentally friendly manner.

APPLIANCE

Old appliances that carry the symbol illustrated may not be disposed of in ordinary household waste.

In accordance with Directive 2012/19/EU, the appliance must be disposed of correctly at the end of its service life.

This involves separating the materials in the appliance for the purpose of recycling and minimising its environmental impact.

Take old appliances to a collection point for electrical scrap or a recycling centre.

Contact your local waste disposal company or your local authority for more information on this subject.

• When disposing of the appliance, note that it contains propane (highly flammable) as a refrigerant. The appliance must therefore be disposed of correctly.

15. Service

You can download this user manual and many other manuals, product videos and installation software from www.lidl-service.com.

Scan this QR code to be directed straight to the Lidl Service website (www.lidl-service.com) where you can open your user manual by entering the article number IAN 375803_2104.

Service Ireland

Hotline

① [phone]
Mon - Fri: 09:00 - 17:00

Please use the contact form at www.mlap.info/contact

Service North Ireland

Hotline

① [phone]

Mon - Fri: 09:00 - 17:00

Please use the contact form at www.mlap.info/contact

IAN375803_2104

15.1. Supplier/Producer/Importer

Please note that you cannot use the address below for returns. Please contact the Service Centre mentioned above.

MLAP GmbH

Meitnerstr. 9

70563 Stuttgart

GERMANY

Sommaire

1. Introduction 40

https://www.lidl-service.com.

14. Likvidace

OBAL

Model no.: SWM 1400 A1

Version: V1.0